ARM: remove ixp23xx and ixp2000 platforms

ixp2xxx platforms have had no real changes since ~2006 and the maintainer
has said on irc that they can be removed:

13:05 < nico> do you still care about ixp2000?
13:22 < lennert> not really, no
13:58 < nico> do you think we could remove it from the kernel tree?
14:01 < lennert> go for it, and remove ixp23xx too while you're at it

Removing will help simplify ARM consolidation in general and PCI re-work
specifically.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>

1 files changed, 0 insertions, 520 deletions

diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
deleted file mode 100644
index f214cdff01cb..000000000000
--- a/arch/arm/mach-ixp2000/core.c
+++ /dev/null
@@ -1,520 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/core.c
- *
- * Common routines used by all IXP2400/2800 based platforms.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (C) MontaVista Software, Inc. 
- *
- * Based on work Copyright (C) 2002-2003 Intel Corporation
- * 
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/bitops.h>
-#include <linux/serial_8250.h>
-#include <linux/mm.h>
-#include <linux/export.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/tlbflush.h>
-#include <asm/pgtable.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-
-#include <mach/gpio-ixp2000.h>
-
-static DEFINE_SPINLOCK(ixp2000_slowport_lock);
-static unsigned long ixp2000_slowport_irq_flags;
-
-/*************************************************************************
- * Slowport access routines
- *************************************************************************/
-void ixp2000_acquire_slowport(struct slowport_cfg *new_cfg, struct slowport_cfg *old_cfg)
-{
-	spin_lock_irqsave(&ixp2000_slowport_lock, ixp2000_slowport_irq_flags);
-
-	old_cfg->CCR = *IXP2000_SLOWPORT_CCR;
-	old_cfg->WTC = *IXP2000_SLOWPORT_WTC2;
-	old_cfg->RTC = *IXP2000_SLOWPORT_RTC2;
-	old_cfg->PCR = *IXP2000_SLOWPORT_PCR;
-	old_cfg->ADC = *IXP2000_SLOWPORT_ADC;
-
-	ixp2000_reg_write(IXP2000_SLOWPORT_CCR, new_cfg->CCR);
-	ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, new_cfg->WTC);
-	ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, new_cfg->RTC);
-	ixp2000_reg_write(IXP2000_SLOWPORT_PCR, new_cfg->PCR);
-	ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, new_cfg->ADC);
-}
-
-void ixp2000_release_slowport(struct slowport_cfg *old_cfg)
-{
-	ixp2000_reg_write(IXP2000_SLOWPORT_CCR, old_cfg->CCR);
-	ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, old_cfg->WTC);
-	ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, old_cfg->RTC);
-	ixp2000_reg_write(IXP2000_SLOWPORT_PCR, old_cfg->PCR);
-	ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, old_cfg->ADC);
-
-	spin_unlock_irqrestore(&ixp2000_slowport_lock, 
-					ixp2000_slowport_irq_flags);
-}
-
-/*************************************************************************
- * Chip specific mappings shared by all IXP2000 systems
- *************************************************************************/
-static struct map_desc ixp2000_io_desc[] __initdata = {
-	{
-		.virtual	= IXP2000_CAP_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_CAP_PHYS_BASE),
-		.length		= IXP2000_CAP_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IXP2000_INTCTL_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_INTCTL_PHYS_BASE),
-		.length		= IXP2000_INTCTL_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IXP2000_PCI_CREG_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_PCI_CREG_PHYS_BASE),
-		.length		= IXP2000_PCI_CREG_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IXP2000_PCI_CSR_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_PCI_CSR_PHYS_BASE),
-		.length		= IXP2000_PCI_CSR_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IXP2000_MSF_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_MSF_PHYS_BASE),
-		.length		= IXP2000_MSF_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IXP2000_SCRATCH_RING_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_SCRATCH_RING_PHYS_BASE),
-		.length		= IXP2000_SCRATCH_RING_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IXP2000_SRAM0_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_SRAM0_PHYS_BASE),
-		.length		= IXP2000_SRAM0_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IXP2000_PCI_IO_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_PCI_IO_PHYS_BASE),
-		.length		= IXP2000_PCI_IO_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IXP2000_PCI_CFG0_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_PCI_CFG0_PHYS_BASE),
-		.length		= IXP2000_PCI_CFG0_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IXP2000_PCI_CFG1_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_PCI_CFG1_PHYS_BASE),
-		.length		= IXP2000_PCI_CFG1_SIZE,
-		.type		= MT_DEVICE,
-	}
-};
-
-void __init ixp2000_map_io(void)
-{
-	iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc));
-
-	/* Set slowport to 8-bit mode.  */
-	ixp2000_reg_wrb(IXP2000_SLOWPORT_FRM, 1);
-}
-
-
-/*************************************************************************
- * Serial port support for IXP2000
- *************************************************************************/
-static struct plat_serial8250_port ixp2000_serial_port[] = {
-	{
-		.mapbase	= IXP2000_UART_PHYS_BASE,
-		.membase	= (char *)(IXP2000_UART_VIRT_BASE + 3),
-		.irq		= IRQ_IXP2000_UART,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= 50000000,
-	},
-	{ },
-};
-
-static struct resource ixp2000_uart_resource = {
-	.start		= IXP2000_UART_PHYS_BASE,
-	.end		= IXP2000_UART_PHYS_BASE + 0x1f,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device ixp2000_serial_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-		.platform_data		= ixp2000_serial_port,
-	},
-	.num_resources	= 1,
-	.resource	= &ixp2000_uart_resource,
-};
-
-void __init ixp2000_uart_init(void)
-{
-	platform_device_register(&ixp2000_serial_device);
-}
-
-
-/*************************************************************************
- * Timer-tick functions for IXP2000
- *************************************************************************/
-static unsigned ticks_per_jiffy;
-static unsigned ticks_per_usec;
-static unsigned next_jiffy_time;
-static volatile unsigned long *missing_jiffy_timer_csr;
-
-unsigned long ixp2000_gettimeoffset (void)
-{
- 	unsigned long offset;
-
-	offset = next_jiffy_time - *missing_jiffy_timer_csr;
-
-	return offset / ticks_per_usec;
-}
-
-static irqreturn_t ixp2000_timer_interrupt(int irq, void *dev_id)
-{
-	/* clear timer 1 */
-	ixp2000_reg_wrb(IXP2000_T1_CLR, 1);
-
-	while ((signed long)(next_jiffy_time - *missing_jiffy_timer_csr)
-							>= ticks_per_jiffy) {
-		timer_tick();
-		next_jiffy_time -= ticks_per_jiffy;
-	}
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction ixp2000_timer_irq = {
-	.name		= "IXP2000 Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= ixp2000_timer_interrupt,
-};
-
-void __init ixp2000_init_time(unsigned long tick_rate)
-{
-	ticks_per_jiffy = (tick_rate + HZ/2) / HZ;
-	ticks_per_usec = tick_rate / 1000000;
-
-	/*
-	 * We use timer 1 as our timer interrupt.
-	 */
-	ixp2000_reg_write(IXP2000_T1_CLR, 0);
-	ixp2000_reg_write(IXP2000_T1_CLD, ticks_per_jiffy - 1);
-	ixp2000_reg_write(IXP2000_T1_CTL, (1 << 7));
-
-	/*
-	 * We use a second timer as a monotonic counter for tracking
-	 * missed jiffies.  The IXP2000 has four timers, but if we're
-	 * on an A-step IXP2800, timer 2 and 3 don't work, so on those
-	 * chips we use timer 4.  Timer 4 is the only timer that can
-	 * be used for the watchdog, so we use timer 2 if we're on a
-	 * non-buggy chip.
-	 */
-	if ((*IXP2000_PRODUCT_ID & 0x001ffef0) == 0x00000000) {
-		printk(KERN_INFO "Enabling IXP2800 erratum #25 workaround\n");
-
-		ixp2000_reg_write(IXP2000_T4_CLR, 0);
-		ixp2000_reg_write(IXP2000_T4_CLD, -1);
-		ixp2000_reg_wrb(IXP2000_T4_CTL, (1 << 7));
-		missing_jiffy_timer_csr = IXP2000_T4_CSR;
-	} else {
-		ixp2000_reg_write(IXP2000_T2_CLR, 0);
-		ixp2000_reg_write(IXP2000_T2_CLD, -1);
-		ixp2000_reg_wrb(IXP2000_T2_CTL, (1 << 7));
-		missing_jiffy_timer_csr = IXP2000_T2_CSR;
-	}
- 	next_jiffy_time = 0xffffffff;
-
-	/* register for interrupt */
-	setup_irq(IRQ_IXP2000_TIMER1, &ixp2000_timer_irq);
-}
-
-/*************************************************************************
- * GPIO helpers
- *************************************************************************/
-static unsigned long GPIO_IRQ_falling_edge;
-static unsigned long GPIO_IRQ_rising_edge;
-static unsigned long GPIO_IRQ_level_low;
-static unsigned long GPIO_IRQ_level_high;
-
-static void update_gpio_int_csrs(void)
-{
-	ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge);
-	ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge);
-	ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low);
-	ixp2000_reg_wrb(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high);
-}
-
-void gpio_line_config(int line, int direction)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (direction == GPIO_OUT) {
-		/* if it's an output, it ain't an interrupt anymore */
-		GPIO_IRQ_falling_edge &= ~(1 << line);
-		GPIO_IRQ_rising_edge &= ~(1 << line);
-		GPIO_IRQ_level_low &= ~(1 << line);
-		GPIO_IRQ_level_high &= ~(1 << line);
-		update_gpio_int_csrs();
-
-		ixp2000_reg_wrb(IXP2000_GPIO_PDSR, 1 << line);
-	} else if (direction == GPIO_IN) {
-		ixp2000_reg_wrb(IXP2000_GPIO_PDCR, 1 << line);
-	}
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(gpio_line_config);
-
-
-/*************************************************************************
- * IRQ handling IXP2000
- *************************************************************************/
-static void ixp2000_GPIO_irq_handler(unsigned int irq, struct irq_desc *desc)
-{                               
-	int i;
-	unsigned long status = *IXP2000_GPIO_INST;
-		   
-	for (i = 0; i <= 7; i++) {
-		if (status & (1<<i)) {
-			generic_handle_irq(i + IRQ_IXP2000_GPIO0);
-		}
-	}
-}
-
-static int ixp2000_GPIO_irq_type(struct irq_data *d, unsigned int type)
-{
-	int line = d->irq - IRQ_IXP2000_GPIO0;
-
-	/*
-	 * First, configure this GPIO line as an input.
-	 */
-	ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line);
-
-	/*
-	 * Then, set the proper trigger type.
-	 */
-	if (type & IRQ_TYPE_EDGE_FALLING)
-		GPIO_IRQ_falling_edge |= 1 << line;
-	else
-		GPIO_IRQ_falling_edge &= ~(1 << line);
-	if (type & IRQ_TYPE_EDGE_RISING)
-		GPIO_IRQ_rising_edge |= 1 << line;
-	else
-		GPIO_IRQ_rising_edge &= ~(1 << line);
-	if (type & IRQ_TYPE_LEVEL_LOW)
-		GPIO_IRQ_level_low |= 1 << line;
-	else
-		GPIO_IRQ_level_low &= ~(1 << line);
-	if (type & IRQ_TYPE_LEVEL_HIGH)
-		GPIO_IRQ_level_high |= 1 << line;
-	else
-		GPIO_IRQ_level_high &= ~(1 << line);
-	update_gpio_int_csrs();
-
-	return 0;
-}
-
-static void ixp2000_GPIO_irq_mask_ack(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-
-	ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0)));
-
-	ixp2000_reg_write(IXP2000_GPIO_EDSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
-	ixp2000_reg_write(IXP2000_GPIO_LDSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
-	ixp2000_reg_wrb(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0)));
-}
-
-static void ixp2000_GPIO_irq_mask(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-
-	ixp2000_reg_wrb(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0)));
-}
-
-static void ixp2000_GPIO_irq_unmask(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-
-	ixp2000_reg_write(IXP2000_GPIO_INSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
-}
-
-static struct irq_chip ixp2000_GPIO_irq_chip = {
-	.irq_ack	= ixp2000_GPIO_irq_mask_ack,
-	.irq_mask	= ixp2000_GPIO_irq_mask,
-	.irq_unmask	= ixp2000_GPIO_irq_unmask,
-	.irq_set_type	= ixp2000_GPIO_irq_type,
-};
-
-static void ixp2000_pci_irq_mask(struct irq_data *d)
-{
-	unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE;
-	if (d->irq == IRQ_IXP2000_PCIA)
-		ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 26)));
-	else if (d->irq == IRQ_IXP2000_PCIB)
-		ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 27)));
-}
-
-static void ixp2000_pci_irq_unmask(struct irq_data *d)
-{
-	unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE;
-	if (d->irq == IRQ_IXP2000_PCIA)
-		ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 26)));
-	else if (d->irq == IRQ_IXP2000_PCIB)
-		ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 27)));
-}
-
-/*
- * Error interrupts. These are used extensively by the microengine drivers
- */
-static void ixp2000_err_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	int i;
-	unsigned long status = *IXP2000_IRQ_ERR_STATUS;
-
-	for(i = 31; i >= 0; i--) {
-		if(status & (1 << i)) {
-			generic_handle_irq(IRQ_IXP2000_DRAM0_MIN_ERR + i);
-		}
-	}
-}
-
-static void ixp2000_err_irq_mask(struct irq_data *d)
-{
-	ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_CLR,
-			(1 << (d->irq - IRQ_IXP2000_DRAM0_MIN_ERR)));
-}
-
-static void ixp2000_err_irq_unmask(struct irq_data *d)
-{
-	ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_SET,
-			(1 << (d->irq - IRQ_IXP2000_DRAM0_MIN_ERR)));
-}
-
-static struct irq_chip ixp2000_err_irq_chip = {
-	.irq_ack	= ixp2000_err_irq_mask,
-	.irq_mask	= ixp2000_err_irq_mask,
-	.irq_unmask	= ixp2000_err_irq_unmask
-};
-
-static struct irq_chip ixp2000_pci_irq_chip = {
-	.irq_ack	= ixp2000_pci_irq_mask,
-	.irq_mask	= ixp2000_pci_irq_mask,
-	.irq_unmask	= ixp2000_pci_irq_unmask
-};
-
-static void ixp2000_irq_mask(struct irq_data *d)
-{
-	ixp2000_reg_wrb(IXP2000_IRQ_ENABLE_CLR, (1 << d->irq));
-}
-
-static void ixp2000_irq_unmask(struct irq_data *d)
-{
-	ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << d->irq));
-}
-
-static struct irq_chip ixp2000_irq_chip = {
-	.irq_ack	= ixp2000_irq_mask,
-	.irq_mask	= ixp2000_irq_mask,
-	.irq_unmask	= ixp2000_irq_unmask
-};
-
-void __init ixp2000_init_irq(void)
-{
-	int irq;
-
-	/*
-	 * Mask all sources
-	 */
-	ixp2000_reg_write(IXP2000_IRQ_ENABLE_CLR, 0xffffffff);
-	ixp2000_reg_write(IXP2000_FIQ_ENABLE_CLR, 0xffffffff);
-
-	/* clear all GPIO edge/level detects */
-	ixp2000_reg_write(IXP2000_GPIO_REDR, 0);
-	ixp2000_reg_write(IXP2000_GPIO_FEDR, 0);
-	ixp2000_reg_write(IXP2000_GPIO_LSHR, 0);
-	ixp2000_reg_write(IXP2000_GPIO_LSLR, 0);
-	ixp2000_reg_write(IXP2000_GPIO_INCR, -1);
-
-	/* clear PCI interrupt sources */
-	ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, 0);
-
-	/*
-	 * Certain bits in the IRQ status register of the 
-	 * IXP2000 are reserved. Instead of trying to map
-	 * things non 1:1 from bit position to IRQ number,
-	 * we mark the reserved IRQs as invalid. This makes
-	 * our mask/unmask code much simpler.
-	 */
-	for (irq = IRQ_IXP2000_SOFT_INT; irq <= IRQ_IXP2000_THDB3; irq++) {
-		if ((1 << irq) & IXP2000_VALID_IRQ_MASK) {
-			irq_set_chip_and_handler(irq, &ixp2000_irq_chip,
-						 handle_level_irq);
-			set_irq_flags(irq, IRQF_VALID);
-		} else set_irq_flags(irq, 0);
-	}
-
-	for (irq = IRQ_IXP2000_DRAM0_MIN_ERR; irq <= IRQ_IXP2000_SP_INT; irq++) {
-		if((1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)) &
-				IXP2000_VALID_ERR_IRQ_MASK) {
-			irq_set_chip_and_handler(irq, &ixp2000_err_irq_chip,
-						 handle_level_irq);
-			set_irq_flags(irq, IRQF_VALID);
-		}
-		else
-			set_irq_flags(irq, 0);
-	}
-	irq_set_chained_handler(IRQ_IXP2000_ERRSUM, ixp2000_err_irq_handler);
-
-	for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) {
-		irq_set_chip_and_handler(irq, &ixp2000_GPIO_irq_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-	irq_set_chained_handler(IRQ_IXP2000_GPIO, ixp2000_GPIO_irq_handler);
-
-	/*
-	 * Enable PCI irqs.  The actual PCI[AB] decoding is done in
-	 * entry-macro.S, so we don't need a chained handler for the
-	 * PCI interrupt source.
-	 */
-	ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << IRQ_IXP2000_PCI));
-	for (irq = IRQ_IXP2000_PCIA; irq <= IRQ_IXP2000_PCIB; irq++) {
-		irq_set_chip_and_handler(irq, &ixp2000_pci_irq_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-}
-
-void ixp2000_restart(char mode, const char *cmd)
-{
-	ixp2000_reg_wrb(IXP2000_RESET0, RSTALL);
-}