Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into sh-latest

1 files changed, 27 insertions, 4 deletions

diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 1e28bed8f425..096da87dc00d 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -24,6 +24,7 @@
 #include <mach/board.h>
 #include <mach/at91sam9261.h>
 #include <mach/at91sam9261_matrix.h>
+#include <mach/at91_matrix.h>
 #include <mach/at91sam9_smc.h>
 
 #include "generic.h"
@@ -236,8 +237,8 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
 	if (!data)
 		return;
 
-	csa = at91_sys_read(AT91_MATRIX_EBICSA);
-	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+	csa = at91_matrix_read(AT91_MATRIX_EBICSA);
+	at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 
 	/* enable pin */
 	if (gpio_is_valid(data->enable_pin))
@@ -603,6 +604,8 @@ static struct resource rtt_resources[] = {
 		.start	= AT91SAM9261_BASE_RTT,
 		.end	= AT91SAM9261_BASE_RTT + SZ_16 - 1,
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags	= IORESOURCE_MEM,
 	}
 };
 
@@ -610,11 +613,32 @@ static struct platform_device at91sam9261_rtt_device = {
 	.name		= "at91_rtt",
 	.id		= 0,
 	.resource	= rtt_resources,
-	.num_resources	= ARRAY_SIZE(rtt_resources),
 };
 
+#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
+static void __init at91_add_device_rtt_rtc(void)
+{
+	at91sam9261_rtt_device.name = "rtc-at91sam9";
+	/*
+	 * The second resource is needed:
+	 * GPBR will serve as the storage for RTC time offset
+	 */
+	at91sam9261_rtt_device.num_resources = 2;
+	rtt_resources[1].start = AT91SAM9261_BASE_GPBR +
+				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
+	rtt_resources[1].end = rtt_resources[1].start + 3;
+}
+#else
+static void __init at91_add_device_rtt_rtc(void)
+{
+	/* Only one resource is needed: RTT not used as RTC */
+	at91sam9261_rtt_device.num_resources = 1;
+}
+#endif
+
 static void __init at91_add_device_rtt(void)
 {
+	at91_add_device_rtt_rtc();
 	platform_device_register(&at91sam9261_rtt_device);
 }
 
@@ -991,7 +1015,6 @@ static inline void configure_usart2_pins(unsigned pins)
 }
 
 static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-struct platform_device *atmel_default_console_device;	/* the serial console device */
 
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {