Merge tag 'mvebu-dt-4.6-1' of git://git.infradead.org/linux-mvebu into next/dt

mvebu dt for 4.6 (part 1)

- Improve Armada 38x device tree (SATA and XHCI)
- Fix SD Card and audio support for OpenRD board
- Provide template for RS-232/485 configuration for the same board
- Use a common dtsi file for linkstation boards
- Add support for Buffalo Linkstation LS-QVL

* tag 'mvebu-dt-4.6-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: kirkwood: add device tree for buffalo linkstation ls-qvl
  ARM: dts: kirkwood: fix audio for OpenRD clients
  ARM: dts: kirkwood: provide template for RS-232/485 configuration for OpenRD
  ARM: dts: kirkwood: split lswvl dts to linkstation lsvl and lswvl
  ARM: dts: kirkwood: split lswxl dts to linkstation lswsxl and lswxl
  ARM: dts: kirkwood: relicense dts of ls-wvl/vl and ls-wxl/wsxl under GPLv2/X11
  ARM: dts: kirkwood: fix SD slot default configuration for OpenRD
  ARM: dts: kirkwood: fix pin names for UART/SD selection for OpenRD
  ARM: dts: armada-370: Update the mpp63 function in the device tree on Armada 370
  ARM: dts: armada-38x: use usb-nop-xceiv PHY for the xhci nodes on Armada 388 GP
  ARM: dts: armada-38x: use regulator-boot-on for SATA regulators on Armada 388 GP
  ARM: dts: armada-38x: adjust board name and compatible for Armada 388 GP

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 116 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts
new file mode 100644
index 000000000000..ecd5c12a805d
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts
@@ -0,0 +1,116 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-WXL
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "kirkwood-linkstation-duo-6281.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-WXL";
+	compatible = "buffalo,lswxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_led_hdderr0: pmx-led-hdderr0 {
+				marvell,pins = "mpp8";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr1: pmx-led-hdderr1 {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_fan_lock: pmx-fan-lock {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_fan_high: pmx-fan-high {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_fan_low: pmx-fan-low {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
+	gpio_leds {
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue
+			     &pmx_led_hdderr0
+			     &pmx_led_hdderr1>;
+
+		red-hdderr0-led {
+			label = "linkstation:red:hdderr0";
+			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		red-hdderr1-led {
+			label = "linkstation:red:hdderr1";
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+		pinctrl-names = "default";
+
+		gpios = <&gpio1 16 GPIO_ACTIVE_LOW
+			 &gpio1 15 GPIO_ACTIVE_LOW>;
+
+		gpio-fan,speed-map = <0 3
+				1500 2
+				3250 1
+				5000 0>;
+
+		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+};