Merge 4.20-rc5 into usb-next

We need the USB fixes into usb-next.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 files changed, 102 insertions, 48 deletions

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 19f4423e70d9..aefd358a5ca3 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -856,7 +856,8 @@
 			causing system reset or hang due to sending
 			INIT from AP to BSP.
 
-	disable_counter_freezing [HW]
+	perf_v4_pmi=	[X86,INTEL]
+			Format: <bool>
 			Disable Intel PMU counter freezing feature.
 			The feature only exists starting from
 			Arch Perfmon v4 (Skylake and newer).
@@ -3504,6 +3505,10 @@
 			before loading.
 			See Documentation/blockdev/ramdisk.txt.
 
+	psi=		[KNL] Enable or disable pressure stall information
+			tracking.
+			Format: <bool>
+
 	psmouse.proto=	[HW,MOUSE] Highest PS2 mouse protocol extension to
 			probe for; one of (bare|imps|exps|lifebook|any).
 	psmouse.rate=	[HW,MOUSE] Set desired mouse report rate, in reports
@@ -4194,9 +4199,13 @@
 
 	spectre_v2=	[X86] Control mitigation of Spectre variant 2
 			(indirect branch speculation) vulnerability.
+			The default operation protects the kernel from
+			user space attacks.
 
-			on   - unconditionally enable
-			off  - unconditionally disable
+			on   - unconditionally enable, implies
+			       spectre_v2_user=on
+			off  - unconditionally disable, implies
+			       spectre_v2_user=off
 			auto - kernel detects whether your CPU model is
 			       vulnerable
 
@@ -4206,6 +4215,12 @@
 			CONFIG_RETPOLINE configuration option, and the
 			compiler with which the kernel was built.
 
+			Selecting 'on' will also enable the mitigation
+			against user space to user space task attacks.
+
+			Selecting 'off' will disable both the kernel and
+			the user space protections.
+
 			Specific mitigations can also be selected manually:
 
 			retpoline	  - replace indirect branches
@@ -4215,6 +4230,48 @@
 			Not specifying this option is equivalent to
 			spectre_v2=auto.
 
+	spectre_v2_user=
+			[X86] Control mitigation of Spectre variant 2
+		        (indirect branch speculation) vulnerability between
+		        user space tasks
+
+			on	- Unconditionally enable mitigations. Is
+				  enforced by spectre_v2=on
+
+			off     - Unconditionally disable mitigations. Is
+				  enforced by spectre_v2=off
+
+			prctl   - Indirect branch speculation is enabled,
+				  but mitigation can be enabled via prctl
+				  per thread.  The mitigation control state
+				  is inherited on fork.
+
+			prctl,ibpb
+				- Like "prctl" above, but only STIBP is
+				  controlled per thread. IBPB is issued
+				  always when switching between different user
+				  space processes.
+
+			seccomp
+				- Same as "prctl" above, but all seccomp
+				  threads will enable the mitigation unless
+				  they explicitly opt out.
+
+			seccomp,ibpb
+				- Like "seccomp" above, but only STIBP is
+				  controlled per thread. IBPB is issued
+				  always when switching between different
+				  user space processes.
+
+			auto    - Kernel selects the mitigation depending on
+				  the available CPU features and vulnerability.
+
+			Default mitigation:
+			If CONFIG_SECCOMP=y then "seccomp", otherwise "prctl"
+
+			Not specifying this option is equivalent to
+			spectre_v2_user=auto.
+
 	spec_store_bypass_disable=
 			[HW] Control Speculative Store Bypass (SSB) Disable mitigation
 			(Speculative Store Bypass vulnerability)
diff --git a/Documentation/arm64/silicon-errata.txt b/Documentation/arm64/silicon-errata.txt
index 76ccded8b74c..8f9577621144 100644
--- a/Documentation/arm64/silicon-errata.txt
+++ b/Documentation/arm64/silicon-errata.txt
@@ -57,6 +57,7 @@ stable kernels.
 | ARM            | Cortex-A73      | #858921         | ARM64_ERRATUM_858921        |
 | ARM            | Cortex-A55      | #1024718        | ARM64_ERRATUM_1024718       |
 | ARM            | Cortex-A76      | #1188873        | ARM64_ERRATUM_1188873       |
+| ARM            | Cortex-A76      | #1286807        | ARM64_ERRATUM_1286807       |
 | ARM            | MMU-500         | #841119,#826419 | N/A                         |
 |                |                 |                 |                             |
 | Cavium         | ThunderX ITS    | #22375, #24313  | CAVIUM_ERRATUM_22375        |
diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index adf20b2bdf71..fbc198d5dd39 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -40,24 +40,36 @@ Required properties:
 		"ref" for 19.2 MHz ref clk,
 		"com_aux" for phy common block aux clock,
 		"ref_aux" for phy reference aux clock,
+
+		For "qcom,ipq8074-qmp-pcie-phy": no clocks are listed.
 		For "qcom,msm8996-qmp-pcie-phy" must contain:
 			"aux", "cfg_ahb", "ref".
 		For "qcom,msm8996-qmp-usb3-phy" must contain:
 			"aux", "cfg_ahb", "ref".
-		For "qcom,qmp-v3-usb3-phy" must contain:
+		For "qcom,sdm845-qmp-usb3-phy" must contain:
+			"aux", "cfg_ahb", "ref", "com_aux".
+		For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
 			"aux", "cfg_ahb", "ref", "com_aux".
+		For "qcom,sdm845-qmp-ufs-phy" must contain:
+			"ref", "ref_aux".
 
  - resets: a list of phandles and reset controller specifier pairs,
 	   one for each entry in reset-names.
  - reset-names: "phy" for reset of phy block,
 		"common" for phy common block reset,
-		"cfg" for phy's ahb cfg block reset (Optional).
+		"cfg" for phy's ahb cfg block reset.
+
+		For "qcom,ipq8074-qmp-pcie-phy" must contain:
+			"phy", "common".
 		For "qcom,msm8996-qmp-pcie-phy" must contain:
-		 "phy", "common", "cfg".
+			"phy", "common", "cfg".
 		For "qcom,msm8996-qmp-usb3-phy" must contain
-		 "phy", "common".
-		For "qcom,ipq8074-qmp-pcie-phy" must contain:
-		 "phy", "common".
+			"phy", "common".
+		For "qcom,sdm845-qmp-usb3-phy" must contain:
+			"phy", "common".
+		For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
+			"phy", "common".
+		For "qcom,sdm845-qmp-ufs-phy": no resets are listed.
 
  - vdda-phy-supply: Phandle to a regulator supply to PHY core block.
  - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
@@ -79,9 +91,10 @@ Required properties for child node:
 
  - #phy-cells: must be 0
 
+Required properties child node of pcie and usb3 qmp phys:
  - clocks: a list of phandles and clock-specifier pairs,
 	   one for each entry in clock-names.
- - clock-names: Must contain following for pcie and usb qmp phys:
+ - clock-names: Must contain following:
 		 "pipe<lane-number>" for pipe clock specific to each lane.
  - clock-output-names: Name of the PHY clock that will be the parent for
 		       the above pipe clock.
@@ -91,9 +104,11 @@ Required properties for child node:
 			(or)
 		  "pcie20_phy1_pipe_clk"
 
+Required properties for child node of PHYs with lane reset, AKA:
+	"qcom,msm8996-qmp-pcie-phy"
  - resets: a list of phandles and reset controller specifier pairs,
 	   one for each entry in reset-names.
- - reset-names: Must contain following for pcie qmp phys:
+ - reset-names: Must contain following:
 		 "lane<lane-number>" for reset specific to each lane.
 
 Example:
diff --git a/Documentation/devicetree/bindings/spi/spi-uniphier.txt b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
index 504a4ecfc7b1..b04e66a52de5 100644
--- a/Documentation/devicetree/bindings/spi/spi-uniphier.txt
+++ b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
@@ -5,18 +5,20 @@ UniPhier SoCs have SCSSI which supports SPI single channel.
 Required properties:
  - compatible: should be "socionext,uniphier-scssi"
  - reg: address and length of the spi master registers
- - #address-cells: must be <1>, see spi-bus.txt
- - #size-cells: must be <0>, see spi-bus.txt
- - clocks: A phandle to the clock for the device.
- - resets: A phandle to the reset control for the device.
+ - interrupts: a single interrupt specifier
+ - pinctrl-names: should be "default"
+ - pinctrl-0: pin control state for the default mode
+ - clocks: a phandle to the clock for the device
+ - resets: a phandle to the reset control for the device
 
 Example:
 
 spi0: spi@54006000 {
 	compatible = "socionext,uniphier-scssi";
 	reg = <0x54006000 0x100>;
-	#address-cells = <1>;
-	#size-cells = <0>;
+	interrupts = <0 39 4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi0>;
 	clocks = <&peri_clk 11>;
 	resets = <&peri_rst 11>;
 };
diff --git a/Documentation/userspace-api/spec_ctrl.rst b/Documentation/userspace-api/spec_ctrl.rst
index 32f3d55c54b7..c4dbe6f7cdae 100644
--- a/Documentation/userspace-api/spec_ctrl.rst
+++ b/Documentation/userspace-api/spec_ctrl.rst
@@ -92,3 +92,12 @@ Speculation misfeature controls
    * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_ENABLE, 0, 0);
    * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_DISABLE, 0, 0);
    * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_FORCE_DISABLE, 0, 0);
+
+- PR_SPEC_INDIR_BRANCH: Indirect Branch Speculation in User Processes
+                        (Mitigate Spectre V2 style attacks against user processes)
+
+  Invocations:
+   * prctl(PR_GET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, 0, 0, 0);
+   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_ENABLE, 0, 0);
+   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_DISABLE, 0, 0);
+   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_FORCE_DISABLE, 0, 0);
diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt
index 7727db8f94bc..5e9b826b5f62 100644
--- a/Documentation/x86/boot.txt
+++ b/Documentation/x86/boot.txt
@@ -61,18 +61,6 @@ Protocol 2.12:	(Kernel 3.8) Added the xloadflags field and extension fields
 	 	to struct boot_params for loading bzImage and ramdisk
 		above 4G in 64bit.
 
-Protocol 2.13:	(Kernel 3.14) Support 32- and 64-bit flags being set in
-		xloadflags to support booting a 64-bit kernel from 32-bit
-		EFI
-
-Protocol 2.14:	(Kernel 4.20) Added acpi_rsdp_addr holding the physical
-		address of the ACPI RSDP table.
-		The bootloader updates version with:
-		0x8000 | min(kernel-version, bootloader-version)
-		kernel-version being the protocol version supported by
-		the kernel and bootloader-version the protocol version
-		supported by the bootloader.
-
 **** MEMORY LAYOUT
 
 The traditional memory map for the kernel loader, used for Image or
@@ -209,7 +197,6 @@ Offset	Proto	Name		Meaning
 0258/8	2.10+	pref_address	Preferred loading address
 0260/4	2.10+	init_size	Linear memory required during initialization
 0264/4	2.11+	handover_offset	Offset of handover entry point
-0268/8	2.14+	acpi_rsdp_addr	Physical address of RSDP table
 
 (1) For backwards compatibility, if the setup_sects field contains 0, the
     real value is 4.
@@ -322,7 +309,7 @@ Protocol:	2.00+
   Contains the magic number "HdrS" (0x53726448).
 
 Field name:	version
-Type:		modify
+Type:		read
 Offset/size:	0x206/2
 Protocol:	2.00+
 
@@ -330,12 +317,6 @@ Protocol:	2.00+
   e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version
   10.17.
 
-  Up to protocol version 2.13 this information is only read by the
-  bootloader. From protocol version 2.14 onwards the bootloader will
-  write the used protocol version or-ed with 0x8000 to the field. The
-  used protocol version will be the minimum of the supported protocol
-  versions of the bootloader and the kernel.
-
 Field name:	realmode_swtch
 Type:		modify (optional)
 Offset/size:	0x208/4
@@ -763,17 +744,6 @@ Offset/size:	0x264/4
 
   See EFI HANDOVER PROTOCOL below for more details.
 
-Field name:	acpi_rsdp_addr
-Type:		write
-Offset/size:	0x268/8
-Protocol:	2.14+
-
-  This field can be set by the boot loader to tell the kernel the
-  physical address of the ACPI RSDP table.
-
-  A value of 0 indicates the kernel should fall back to the standard
-  methods to locate the RSDP.
-
 
 **** THE IMAGE CHECKSUM