IB/ipath: Add new chip-specific functions to older chips, consistent init

This adds the new (sometimes empty) chip-specific functions to the older
chips, and makes the initialization and related functions consistent across
all 3 chips.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

4 files changed, 407 insertions, 26 deletions

diff --git a/drivers/infiniband/hw/ipath/ipath_common.h b/drivers/infiniband/hw/ipath/ipath_common.h
index aa780e7f2418..0fa43ba25b7e 100644
--- a/drivers/infiniband/hw/ipath/ipath_common.h
+++ b/drivers/infiniband/hw/ipath/ipath_common.h
@@ -82,6 +82,16 @@
 #define IPATH_IB_LINK_EXTERNAL	7 /* normal, disable local loopback */
 
 /*
+ * These 3 values (SDR and DDR may be ORed for auto-speed
+ * negotiation) are used for the 3rd argument to path_f_set_ib_cfg
+ * with cmd IPATH_IB_CFG_SPD_ENB, by direct calls or via sysfs.  They
+ * are also the the possible values for ipath_link_speed_enabled and active
+ * The values were chosen to match values used within the IB spec.
+ */
+#define IPATH_IB_SDR 1
+#define IPATH_IB_DDR 2
+
+/*
  * stats maintained by the driver.  For now, at least, this is global
  * to all minor devices.
  */
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c
index ac436c630bcc..9e2ced3cdc5e 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6110.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c
@@ -329,6 +329,9 @@ static const struct ipath_cregs ipath_ht_cregs = {
 #define INFINIPATH_HWE_HTAPLL_RFSLIP        0x1000000000000000ULL
 #define INFINIPATH_HWE_SERDESPLLFAILED      0x2000000000000000ULL
 
+#define IBA6110_IBCS_LINKTRAININGSTATE_MASK 0xf
+#define IBA6110_IBCS_LINKSTATE_SHIFT 4
+
 /* kr_extstatus bits */
 #define INFINIPATH_EXTS_FREQSEL 0x2
 #define INFINIPATH_EXTS_SERDESSEL 0x4
@@ -705,7 +708,6 @@ static int ipath_ht_boardname(struct ipath_devdata *dd, char *name,
 			      "with ID %u\n", boardrev);
 		snprintf(name, namelen, "Unknown_InfiniPath_QHT7xxx_%u",
 			 boardrev);
-		ret = 1;
 		break;
 	}
 	if (n)
@@ -1137,11 +1139,49 @@ static void ipath_setup_ht_setextled(struct ipath_devdata *dd,
 
 static void ipath_init_ht_variables(struct ipath_devdata *dd)
 {
+	/*
+	 * setup the register offsets, since they are different for each
+	 * chip
+	 */
+	dd->ipath_kregs = &ipath_ht_kregs;
+	dd->ipath_cregs = &ipath_ht_cregs;
+
 	dd->ipath_gpio_sda_num = _IPATH_GPIO_SDA_NUM;
 	dd->ipath_gpio_scl_num = _IPATH_GPIO_SCL_NUM;
 	dd->ipath_gpio_sda = IPATH_GPIO_SDA;
 	dd->ipath_gpio_scl = IPATH_GPIO_SCL;
 
+	/*
+	 * Fill in data for field-values that change in newer chips.
+	 * We dynamically specify only the mask for LINKTRAININGSTATE
+	 * and only the shift for LINKSTATE, as they are the only ones
+	 * that change.  Also precalculate the 3 link states of interest
+	 * and the combined mask.
+	 */
+	dd->ibcs_ls_shift = IBA6110_IBCS_LINKSTATE_SHIFT;
+	dd->ibcs_lts_mask = IBA6110_IBCS_LINKTRAININGSTATE_MASK;
+	dd->ibcs_mask = (INFINIPATH_IBCS_LINKSTATE_MASK <<
+		dd->ibcs_ls_shift) | dd->ibcs_lts_mask;
+	dd->ib_init = (INFINIPATH_IBCS_LT_STATE_LINKUP <<
+		INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) |
+		(INFINIPATH_IBCS_L_STATE_INIT << dd->ibcs_ls_shift);
+	dd->ib_arm = (INFINIPATH_IBCS_LT_STATE_LINKUP <<
+		INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) |
+		(INFINIPATH_IBCS_L_STATE_ARM << dd->ibcs_ls_shift);
+	dd->ib_active = (INFINIPATH_IBCS_LT_STATE_LINKUP <<
+		INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) |
+		(INFINIPATH_IBCS_L_STATE_ACTIVE << dd->ibcs_ls_shift);
+
+	/*
+	 * Fill in data for ibcc field-values that change in newer chips.
+	 * We dynamically specify only the mask for LINKINITCMD
+	 * and only the shift for LINKCMD and MAXPKTLEN, as they are
+	 * the only ones that change.
+	 */
+	dd->ibcc_lic_mask = INFINIPATH_IBCC_LINKINITCMD_MASK;
+	dd->ibcc_lc_shift = INFINIPATH_IBCC_LINKCMD_SHIFT;
+	dd->ibcc_mpl_shift = INFINIPATH_IBCC_MAXPKTLEN_SHIFT;
+
 	/* Fill in shifts for RcvCtrl. */
 	dd->ipath_r_portenable_shift = INFINIPATH_R_PORTENABLE_SHIFT;
 	dd->ipath_r_intravail_shift = INFINIPATH_R_INTRAVAIL_SHIFT;
@@ -1204,6 +1244,8 @@ static void ipath_init_ht_variables(struct ipath_devdata *dd)
 
 	dd->ipath_i_rcvavail_mask = INFINIPATH_I_RCVAVAIL_MASK;
 	dd->ipath_i_rcvurg_mask = INFINIPATH_I_RCVURG_MASK;
+	dd->ipath_i_rcvavail_shift = INFINIPATH_I_RCVAVAIL_SHIFT;
+	dd->ipath_i_rcvurg_shift = INFINIPATH_I_RCVURG_SHIFT;
 
 	/*
 	 * EEPROM error log 0 is TXE Parity errors. 1 is RXE Parity.
@@ -1217,9 +1259,17 @@ static void ipath_init_ht_variables(struct ipath_devdata *dd)
 		INFINIPATH_HWE_RXEMEMPARITYERR_MASK <<
 		INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT;
 
-	dd->ipath_eep_st_masks[2].errs_to_log =
-		INFINIPATH_E_INVALIDADDR | INFINIPATH_E_RESET;
+	dd->ipath_eep_st_masks[2].errs_to_log = INFINIPATH_E_RESET;
 
+	dd->delay_mult = 2; /* SDR, 4X, can't change */
+
+	dd->ipath_link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X;
+	dd->ipath_link_speed_supported = IPATH_IB_SDR;
+	dd->ipath_link_width_enabled = IB_WIDTH_4X;
+	dd->ipath_link_speed_enabled = dd->ipath_link_speed_supported;
+	/* these can't change for this chip, so set once */
+	dd->ipath_link_width_active = dd->ipath_link_width_enabled;
+	dd->ipath_link_speed_active = dd->ipath_link_speed_enabled;
 }
 
 /**
@@ -1281,6 +1331,9 @@ static void ipath_ht_init_hwerrors(struct ipath_devdata *dd)
 	dd->ipath_hwerrmask = val;
 }
 
+
+
+
 /**
  * ipath_ht_bringup_serdes - bring up the serdes
  * @dd: the infinipath device
@@ -1439,6 +1492,7 @@ static void ipath_ht_put_tid(struct ipath_devdata *dd,
 			pa |= lenvalid | INFINIPATH_RT_VALID;
 		}
 	}
+
 	writeq(pa, tidptr);
 }
 
@@ -1644,6 +1698,13 @@ static void ipath_ht_free_irq(struct ipath_devdata *dd)
 	dd->ipath_intconfig = 0;
 }
 
+static struct ipath_message_header *
+ipath_ht_get_msgheader(struct ipath_devdata *dd, __le32 *rhf_addr)
+{
+	return (struct ipath_message_header *)
+		&rhf_addr[sizeof(u64) / sizeof(u32)];
+}
+
 static void ipath_ht_config_ports(struct ipath_devdata *dd, ushort cfgports)
 {
 	dd->ipath_portcnt =
@@ -1757,6 +1818,90 @@ static void ipath_ht_read_counters(struct ipath_devdata *dd,
 	cntrs->RxDlidFltrCnt = 0;
 }
 
+
+/* no interrupt fallback for these chips */
+static int ipath_ht_nointr_fallback(struct ipath_devdata *dd)
+{
+	return 0;
+}
+
+
+/*
+ * reset the XGXS (between serdes and IBC).  Slightly less intrusive
+ * than resetting the IBC or external link state, and useful in some
+ * cases to cause some retraining.  To do this right, we reset IBC
+ * as well.
+ */
+static void ipath_ht_xgxs_reset(struct ipath_devdata *dd)
+{
+	u64 val, prev_val;
+
+	prev_val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
+	val = prev_val | INFINIPATH_XGXS_RESET;
+	prev_val &= ~INFINIPATH_XGXS_RESET; /* be sure */
+	ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
+			 dd->ipath_control & ~INFINIPATH_C_LINKENABLE);
+	ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
+	ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
+	ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, prev_val);
+	ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
+			 dd->ipath_control);
+}
+
+
+static int ipath_ht_get_ib_cfg(struct ipath_devdata *dd, int which)
+{
+	int ret;
+
+	switch (which) {
+	case IPATH_IB_CFG_LWID:
+		ret = dd->ipath_link_width_active;
+		break;
+	case IPATH_IB_CFG_SPD:
+		ret = dd->ipath_link_speed_active;
+		break;
+	case IPATH_IB_CFG_LWID_ENB:
+		ret = dd->ipath_link_width_enabled;
+		break;
+	case IPATH_IB_CFG_SPD_ENB:
+		ret = dd->ipath_link_speed_enabled;
+		break;
+	default:
+		ret =  -ENOTSUPP;
+		break;
+	}
+	return ret;
+}
+
+
+/* we assume range checking is already done, if needed */
+static int ipath_ht_set_ib_cfg(struct ipath_devdata *dd, int which, u32 val)
+{
+	int ret = 0;
+
+	if (which == IPATH_IB_CFG_LWID_ENB)
+		dd->ipath_link_width_enabled = val;
+	else if (which == IPATH_IB_CFG_SPD_ENB)
+		dd->ipath_link_speed_enabled = val;
+	else
+		ret = -ENOTSUPP;
+	return ret;
+}
+
+
+static void ipath_ht_config_jint(struct ipath_devdata *dd, u16 a, u16 b)
+{
+}
+
+
+static int ipath_ht_ib_updown(struct ipath_devdata *dd, int ibup, u64 ibcs)
+{
+	ipath_setup_ht_setextled(dd, ipath_ib_linkstate(dd, ibcs),
+		ipath_ib_linktrstate(dd, ibcs));
+	return 0;
+}
+
+
 /**
  * ipath_init_iba6110_funcs - set up the chip-specific function pointers
  * @dd: the infinipath device
@@ -1781,24 +1926,19 @@ void ipath_init_iba6110_funcs(struct ipath_devdata *dd)
 	dd->ipath_f_setextled = ipath_setup_ht_setextled;
 	dd->ipath_f_get_base_info = ipath_ht_get_base_info;
 	dd->ipath_f_free_irq = ipath_ht_free_irq;
+	dd->ipath_f_tidtemplate = ipath_ht_tidtemplate;
+	dd->ipath_f_intr_fallback = ipath_ht_nointr_fallback;
+	dd->ipath_f_get_msgheader = ipath_ht_get_msgheader;
 	dd->ipath_f_config_ports = ipath_ht_config_ports;
 	dd->ipath_f_read_counters = ipath_ht_read_counters;
+	dd->ipath_f_xgxs_reset = ipath_ht_xgxs_reset;
+	dd->ipath_f_get_ib_cfg = ipath_ht_get_ib_cfg;
+	dd->ipath_f_set_ib_cfg = ipath_ht_set_ib_cfg;
+	dd->ipath_f_config_jint = ipath_ht_config_jint;
+	dd->ipath_f_ib_updown = ipath_ht_ib_updown;
 
 	/*
 	 * initialize chip-specific variables
 	 */
-	dd->ipath_f_tidtemplate = ipath_ht_tidtemplate;
-
-	/*
-	 * setup the register offsets, since they are different for each
-	 * chip
-	 */
-	dd->ipath_kregs = &ipath_ht_kregs;
-	dd->ipath_cregs = &ipath_ht_cregs;
-
-	/*
-	 * do very early init that is needed before ipath_f_bus is
-	 * called
-	 */
 	ipath_init_ht_variables(dd);
 }
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c
index 57915fd718e2..597192e912de 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6120.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c
@@ -329,6 +329,9 @@ static const struct ipath_cregs ipath_pe_cregs = {
 #define INFINIPATH_HWE_PCIE0PLLFAILED       0x0800000000000000ULL
 #define INFINIPATH_HWE_SERDESPLLFAILED      0x1000000000000000ULL
 
+#define IBA6120_IBCS_LINKTRAININGSTATE_MASK 0xf
+#define IBA6120_IBCS_LINKSTATE_SHIFT 4
+
 /* kr_extstatus bits */
 #define INFINIPATH_EXTS_FREQSEL 0x2
 #define INFINIPATH_EXTS_SERDESSEL 0x4
@@ -936,12 +939,27 @@ static int ipath_setup_pe_config(struct ipath_devdata *dd,
 	else
 		ipath_dev_err(dd, "Can't find PCI Express "
 			      "capability!\n");
+
+	dd->ipath_link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X;
+	dd->ipath_link_speed_supported = IPATH_IB_SDR;
+	dd->ipath_link_width_enabled = IB_WIDTH_4X;
+	dd->ipath_link_speed_enabled = dd->ipath_link_speed_supported;
+	/* these can't change for this chip, so set once */
+	dd->ipath_link_width_active = dd->ipath_link_width_enabled;
+	dd->ipath_link_speed_active = dd->ipath_link_speed_enabled;
 	return 0;
 }
 
 static void ipath_init_pe_variables(struct ipath_devdata *dd)
 {
 	/*
+	 * setup the register offsets, since they are different for each
+	 * chip
+	 */
+	dd->ipath_kregs = &ipath_pe_kregs;
+	dd->ipath_cregs = &ipath_pe_cregs;
+
+	/*
 	 * bits for selecting i2c direction and values,
 	 * used for I2C serial flash
 	 */
@@ -950,6 +968,37 @@ static void ipath_init_pe_variables(struct ipath_devdata *dd)
 	dd->ipath_gpio_sda = IPATH_GPIO_SDA;
 	dd->ipath_gpio_scl = IPATH_GPIO_SCL;
 
+	/*
+	 * Fill in data for field-values that change in newer chips.
+	 * We dynamically specify only the mask for LINKTRAININGSTATE
+	 * and only the shift for LINKSTATE, as they are the only ones
+	 * that change.  Also precalculate the 3 link states of interest
+	 * and the combined mask.
+	 */
+	dd->ibcs_ls_shift = IBA6120_IBCS_LINKSTATE_SHIFT;
+	dd->ibcs_lts_mask = IBA6120_IBCS_LINKTRAININGSTATE_MASK;
+	dd->ibcs_mask = (INFINIPATH_IBCS_LINKSTATE_MASK <<
+		dd->ibcs_ls_shift) | dd->ibcs_lts_mask;
+	dd->ib_init = (INFINIPATH_IBCS_LT_STATE_LINKUP <<
+		INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) |
+		(INFINIPATH_IBCS_L_STATE_INIT << dd->ibcs_ls_shift);
+	dd->ib_arm = (INFINIPATH_IBCS_LT_STATE_LINKUP <<
+		INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) |
+		(INFINIPATH_IBCS_L_STATE_ARM << dd->ibcs_ls_shift);
+	dd->ib_active = (INFINIPATH_IBCS_LT_STATE_LINKUP <<
+		INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) |
+		(INFINIPATH_IBCS_L_STATE_ACTIVE << dd->ibcs_ls_shift);
+
+	/*
+	 * Fill in data for ibcc field-values that change in newer chips.
+	 * We dynamically specify only the mask for LINKINITCMD
+	 * and only the shift for LINKCMD and MAXPKTLEN, as they are
+	 * the only ones that change.
+	 */
+	dd->ibcc_lic_mask = INFINIPATH_IBCC_LINKINITCMD_MASK;
+	dd->ibcc_lc_shift = INFINIPATH_IBCC_LINKCMD_SHIFT;
+	dd->ibcc_mpl_shift = INFINIPATH_IBCC_MAXPKTLEN_SHIFT;
+
 	/* Fill in shifts for RcvCtrl. */
 	dd->ipath_r_portenable_shift = INFINIPATH_R_PORTENABLE_SHIFT;
 	dd->ipath_r_intravail_shift = INFINIPATH_R_INTRAVAIL_SHIFT;
@@ -1003,6 +1052,8 @@ static void ipath_init_pe_variables(struct ipath_devdata *dd)
 
 	dd->ipath_i_rcvavail_mask = INFINIPATH_I_RCVAVAIL_MASK;
 	dd->ipath_i_rcvurg_mask = INFINIPATH_I_RCVURG_MASK;
+	dd->ipath_i_rcvavail_shift = INFINIPATH_I_RCVAVAIL_SHIFT;
+	dd->ipath_i_rcvurg_shift = INFINIPATH_I_RCVURG_SHIFT;
 
 	/*
 	 * EEPROM error log 0 is TXE Parity errors. 1 is RXE Parity.
@@ -1024,6 +1075,7 @@ static void ipath_init_pe_variables(struct ipath_devdata *dd)
 		INFINIPATH_E_INVALIDADDR | INFINIPATH_E_RESET;
 
 
+	dd->delay_mult = 2; /* SDR, 4X, can't change */
 }
 
 /* setup the MSI stuff again after a reset.  I'd like to just call
@@ -1329,6 +1381,9 @@ static int ipath_pe_early_init(struct ipath_devdata *dd)
 	 */
 	dd->ipath_rcvhdrentsize = 24;
 	dd->ipath_rcvhdrsize = IPATH_DFLT_RCVHDRSIZE;
+	dd->ipath_rhf_offset = 0;
+	dd->ipath_egrtidbase = (u64 __iomem *)
+		((char __iomem *) dd->ipath_kregbase + dd->ipath_rcvegrbase);
 
 	/*
 	 * To truly support a 4KB MTU (for usermode), we need to
@@ -1399,6 +1454,14 @@ static void ipath_pe_free_irq(struct ipath_devdata *dd)
 	dd->ipath_irq = 0;
 }
 
+
+static struct ipath_message_header *
+ipath_pe_get_msgheader(struct ipath_devdata *dd, __le32 *rhf_addr)
+{
+	return (struct ipath_message_header *)
+		&rhf_addr[sizeof(u64) / sizeof(u32)];
+}
+
 static void ipath_pe_config_ports(struct ipath_devdata *dd, ushort cfgports)
 {
 	dd->ipath_portcnt =
@@ -1534,6 +1597,88 @@ static int ipath_pe_txe_recover(struct ipath_devdata *dd)
 	return 1;
 }
 
+/* no interrupt fallback for these chips */
+static int ipath_pe_nointr_fallback(struct ipath_devdata *dd)
+{
+	return 0;
+}
+
+
+/*
+ * reset the XGXS (between serdes and IBC).  Slightly less intrusive
+ * than resetting the IBC or external link state, and useful in some
+ * cases to cause some retraining.  To do this right, we reset IBC
+ * as well.
+ */
+static void ipath_pe_xgxs_reset(struct ipath_devdata *dd)
+{
+	u64 val, prev_val;
+
+	prev_val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
+	val = prev_val | INFINIPATH_XGXS_RESET;
+	prev_val &= ~INFINIPATH_XGXS_RESET; /* be sure */
+	ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
+			 dd->ipath_control & ~INFINIPATH_C_LINKENABLE);
+	ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
+	ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
+	ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, prev_val);
+	ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
+			 dd->ipath_control);
+}
+
+
+static int ipath_pe_get_ib_cfg(struct ipath_devdata *dd, int which)
+{
+	int ret;
+
+	switch (which) {
+	case IPATH_IB_CFG_LWID:
+		ret = dd->ipath_link_width_active;
+		break;
+	case IPATH_IB_CFG_SPD:
+		ret = dd->ipath_link_speed_active;
+		break;
+	case IPATH_IB_CFG_LWID_ENB:
+		ret = dd->ipath_link_width_enabled;
+		break;
+	case IPATH_IB_CFG_SPD_ENB:
+		ret = dd->ipath_link_speed_enabled;
+		break;
+	default:
+		ret =  -ENOTSUPP;
+		break;
+	}
+	return ret;
+}
+
+
+/* we assume range checking is already done, if needed */
+static int ipath_pe_set_ib_cfg(struct ipath_devdata *dd, int which, u32 val)
+{
+	int ret = 0;
+
+	if (which == IPATH_IB_CFG_LWID_ENB)
+		dd->ipath_link_width_enabled = val;
+	else if (which == IPATH_IB_CFG_SPD_ENB)
+		dd->ipath_link_speed_enabled = val;
+	else
+		ret = -ENOTSUPP;
+	return ret;
+}
+
+static void ipath_pe_config_jint(struct ipath_devdata *dd, u16 a, u16 b)
+{
+}
+
+
+static int ipath_pe_ib_updown(struct ipath_devdata *dd, int ibup, u64 ibcs)
+{
+	ipath_setup_pe_setextled(dd, ipath_ib_linkstate(dd, ibcs),
+		ipath_ib_linktrstate(dd, ibcs));
+	return 0;
+}
+
+
 /**
  * ipath_init_iba6120_funcs - set up the chip-specific function pointers
  * @dd: the infinipath device
@@ -1554,7 +1699,7 @@ void ipath_init_iba6120_funcs(struct ipath_devdata *dd)
 	dd->ipath_f_bringup_serdes = ipath_pe_bringup_serdes;
 	dd->ipath_f_clear_tids = ipath_pe_clear_tids;
 	/*
-	 * this may get changed after we read the chip revision,
+	 * _f_put_tid may get changed after we read the chip revision,
 	 * but we start with the safe version for all revs
 	 */
 	dd->ipath_f_put_tid = ipath_pe_put_tid;
@@ -1562,19 +1707,19 @@ void ipath_init_iba6120_funcs(struct ipath_devdata *dd)
 	dd->ipath_f_setextled = ipath_setup_pe_setextled;
 	dd->ipath_f_get_base_info = ipath_pe_get_base_info;
 	dd->ipath_f_free_irq = ipath_pe_free_irq;
-
-	/* initialize chip-specific variables */
 	dd->ipath_f_tidtemplate = ipath_pe_tidtemplate;
+	dd->ipath_f_intr_fallback = ipath_pe_nointr_fallback;
+	dd->ipath_f_xgxs_reset = ipath_pe_xgxs_reset;
+	dd->ipath_f_get_msgheader = ipath_pe_get_msgheader;
 	dd->ipath_f_config_ports = ipath_pe_config_ports;
 	dd->ipath_f_read_counters = ipath_pe_read_counters;
+	dd->ipath_f_get_ib_cfg = ipath_pe_get_ib_cfg;
+	dd->ipath_f_set_ib_cfg = ipath_pe_set_ib_cfg;
+	dd->ipath_f_config_jint = ipath_pe_config_jint;
+	dd->ipath_f_ib_updown = ipath_pe_ib_updown;
 
-	/*
-	 * setup the register offsets, since they are different for each
-	 * chip
-	 */
-	dd->ipath_kregs = &ipath_pe_kregs;
-	dd->ipath_cregs = &ipath_pe_cregs;
 
+	/* initialize chip-specific variables */
 	ipath_init_pe_variables(dd);
 }
 
diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h
index c0ecda35f2d9..6a5fe0157330 100644
--- a/drivers/infiniband/hw/ipath/ipath_kernel.h
+++ b/drivers/infiniband/hw/ipath/ipath_kernel.h
@@ -191,6 +191,22 @@ struct ipath_skbinfo {
 	dma_addr_t phys;
 };
 
+/*
+ * Possible IB config parameters for ipath_f_get/set_ib_cfg()
+ */
+#define IPATH_IB_CFG_LIDLMC 0 /* Get/set LID (LS16b) and Mask (MS16b) */
+#define IPATH_IB_CFG_HRTBT 1 /* Get/set Heartbeat off/enable/auto */
+#define IPATH_IB_HRTBT_ON 3 /* Heartbeat enabled, sent every 100msec */
+#define IPATH_IB_HRTBT_OFF 0 /* Heartbeat off */
+#define IPATH_IB_CFG_LWID_ENB 2 /* Get/set allowed Link-width */
+#define IPATH_IB_CFG_LWID 3 /* Get currently active Link-width */
+#define IPATH_IB_CFG_SPD_ENB 4 /* Get/set allowed Link speeds */
+#define IPATH_IB_CFG_SPD 5 /* Get current Link spd */
+#define IPATH_IB_CFG_RXPOL_ENB 6 /* Get/set Auto-RX-polarity enable */
+#define IPATH_IB_CFG_LREV_ENB 7 /* Get/set Auto-Lane-reversal enable */
+#define IPATH_IB_CFG_LINKLATENCY 8 /* Get Auto-Lane-reversal enable */
+
+
 struct ipath_devdata {
 	struct list_head ipath_list;
 
@@ -231,6 +247,8 @@ struct ipath_devdata {
 	struct _ipath_layer ipath_layer;
 	/* setup intr */
 	int (*ipath_f_intrsetup)(struct ipath_devdata *);
+	/* fallback to alternate interrupt type if possible */
+	int (*ipath_f_intr_fallback)(struct ipath_devdata *);
 	/* setup on-chip bus config */
 	int (*ipath_f_bus)(struct ipath_devdata *, struct pci_dev *);
 	/* hard reset chip */
@@ -253,9 +271,18 @@ struct ipath_devdata {
 	int (*ipath_f_get_base_info)(struct ipath_portdata *, void *);
 	/* free irq */
 	void (*ipath_f_free_irq)(struct ipath_devdata *);
+	struct ipath_message_header *(*ipath_f_get_msgheader)
+					(struct ipath_devdata *, __le32 *);
 	void (*ipath_f_config_ports)(struct ipath_devdata *, ushort);
+	int (*ipath_f_get_ib_cfg)(struct ipath_devdata *, int);
+	int (*ipath_f_set_ib_cfg)(struct ipath_devdata *, int, u32);
+	void (*ipath_f_config_jint)(struct ipath_devdata *, u16 , u16);
 	void (*ipath_f_read_counters)(struct ipath_devdata *,
-				      struct infinipath_counters *);
+					struct infinipath_counters *);
+	void (*ipath_f_xgxs_reset)(struct ipath_devdata *);
+	/* per chip actions needed for IB Link up/down changes */
+	int (*ipath_f_ib_updown)(struct ipath_devdata *, int, u64);
+
 	struct ipath_ibdev *verbs_dev;
 	struct timer_list verbs_timer;
 	/* total dwords sent (summed from counter) */
@@ -375,6 +402,7 @@ struct ipath_devdata {
 	struct page **ipath_pageshadow;
 	/* shadow copy of dma handles for exp tid pages */
 	dma_addr_t *ipath_physshadow;
+	u64 __iomem *ipath_egrtidbase;
 	/* lock to workaround chip bug 9437 */
 	spinlock_t ipath_tid_lock;
 	spinlock_t ipath_sendctrl_lock;
@@ -565,6 +593,14 @@ struct ipath_devdata {
 	u8 ipath_pci_cacheline;
 	/* LID mask control */
 	u8 ipath_lmc;
+	/* link width supported */
+	u8 ipath_link_width_supported;
+	/* link speed supported */
+	u8 ipath_link_speed_supported;
+	u8 ipath_link_width_enabled;
+	u8 ipath_link_speed_enabled;
+	u8 ipath_link_width_active;
+	u8 ipath_link_speed_active;
 	/* Rx Polarity inversion (compensate for ~tx on partner) */
 	u8 ipath_rx_pol_inv;
 
@@ -599,6 +635,8 @@ struct ipath_devdata {
 	 */
 	u32 ipath_i_rcvavail_mask;
 	u32 ipath_i_rcvurg_mask;
+	u16 ipath_i_rcvurg_shift;
+	u16 ipath_i_rcvavail_shift;
 
 	/*
 	 * Register bits for selecting i2c direction and values, used for
@@ -612,6 +650,29 @@ struct ipath_devdata {
 	/* lock for doing RMW of shadows/regs for ExtCtrl and GPIO */
 	spinlock_t ipath_gpio_lock;
 
+	/*
+	 * IB link and linktraining states and masks that vary per chip in
+	 * some way.  Set at init, to avoid each IB status change interrupt
+	 */
+	u8 ibcs_ls_shift;
+	u8 ibcs_lts_mask;
+	u32 ibcs_mask;
+	u32 ib_init;
+	u32 ib_arm;
+	u32 ib_active;
+
+	u16 ipath_rhf_offset; /* offset of RHF within receive header entry */
+
+	/*
+	 * shift/mask for linkcmd, linkinitcmd, maxpktlen in ibccontol
+	 * reg. Changes for IBA7220
+	 */
+	u8 ibcc_lic_mask; /* LinkInitCmd */
+	u8 ibcc_lc_shift; /* LinkCmd */
+	u8 ibcc_mpl_shift; /* Maxpktlen */
+
+	u8 delay_mult;
+
 	/* used to override LED behavior */
 	u8 ipath_led_override;  /* Substituted for normal value, if non-zero */
 	u16 ipath_led_override_timeoff; /* delta to next timer event */
@@ -639,6 +700,10 @@ struct ipath_devdata {
 	 * each of the counters to increment.
 	 */
 	struct ipath_eep_log_mask ipath_eep_st_masks[IPATH_EEP_LOG_CNT];
+
+	/* interrupt mitigation reload register info */
+	u16 ipath_jint_idle_ticks;	/* idle clock ticks */
+	u16 ipath_jint_max_packets;	/* max packets across all ports */
 };
 
 /* Private data for file operations */
@@ -938,6 +1003,27 @@ static inline u64 ipath_read_ireg(const struct ipath_devdata *dd, ipath_kreg r)
 }
 
 /*
+ * from contents of IBCStatus (or a saved copy), return linkstate
+ * Report ACTIVE_DEFER as ACTIVE, because we treat them the same
+ * everywhere, anyway (and should be, for almost all purposes).
+ */
+static inline u32 ipath_ib_linkstate(struct ipath_devdata *dd, u64 ibcs)
+{
+	u32 state = (u32)(ibcs >> dd->ibcs_ls_shift) &
+		INFINIPATH_IBCS_LINKSTATE_MASK;
+	if (state == INFINIPATH_IBCS_L_STATE_ACT_DEFER)
+		state = INFINIPATH_IBCS_L_STATE_ACTIVE;
+	return state;
+}
+
+/* from contents of IBCStatus (or a saved copy), return linktrainingstate */
+static inline u32 ipath_ib_linktrstate(struct ipath_devdata *dd, u64 ibcs)
+{
+	return (u32)(ibcs >> INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) &
+		dd->ibcs_lts_mask;
+}
+
+/*
  * sysfs interface.
  */