staging: rtl8192u Fix typos.

 Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

13 files changed, 80 insertions, 80 deletions

diff --git a/drivers/staging/rtl8192u/r8180_93cx6.c b/drivers/staging/rtl8192u/r8180_93cx6.c
index 8878cfeb0fbb..0e8ff75e291b 100644
--- a/drivers/staging/rtl8192u/r8180_93cx6.c
+++ b/drivers/staging/rtl8192u/r8180_93cx6.c
@@ -14,7 +14,7 @@
 
    Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.
 
-   We want to tanks the Authors of those projects and the Ndiswrapper
+   We want to thanks the Authors of those projects and the Ndiswrapper
    project Authors.
 */
 
diff --git a/drivers/staging/rtl8192u/r8180_93cx6.h b/drivers/staging/rtl8192u/r8180_93cx6.h
index fb3ac9766ea5..3527d3280682 100644
--- a/drivers/staging/rtl8192u/r8180_93cx6.h
+++ b/drivers/staging/rtl8192u/r8180_93cx6.h
@@ -7,7 +7,7 @@
 	Parts of this driver are based on the rtl8180 driver skeleton from Patric Schenke & Andres Salomon
 	Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
 
-	We want to tanks the Authors of such projects and the Ndiswrapper project Authors.
+	We want to thanks the Authors of such projects and the Ndiswrapper project Authors.
 */
 
 /*This files contains card eeprom (93c46 or 93c56) programming routines*/
diff --git a/drivers/staging/rtl8192u/r8192U.h b/drivers/staging/rtl8192u/r8192U.h
index 43d459d81885..adeb724e0f61 100644
--- a/drivers/staging/rtl8192u/r8192U.h
+++ b/drivers/staging/rtl8192u/r8192U.h
@@ -11,7 +11,7 @@
 
    Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
 
-   We want to tanks the Authors of those projects and the Ndiswrapper
+   We want to thanks the Authors of those projects and the Ndiswrapper
    project Authors.
 */
 
@@ -98,7 +98,7 @@ do { if(rt_global_debug_component & component) \
 #define COMP_INIT				BIT2		// during driver initialization / halt / reset.
 
 
-#define COMP_RECV				BIT3		// Reveive part data path.
+#define COMP_RECV				BIT3		// Revive part data path.
 #define COMP_SEND				BIT4		// Send part path.
 #define COMP_IO					BIT5		// I/O Related. Added by Annie, 2006-03-02.
 #define COMP_POWER				BIT6		// 802.11 Power Save mode or System/Device Power state related.
@@ -322,7 +322,7 @@ typedef struct _tx_fwinfo_819x_usb {
         u8		TxSubCarrier:2;         // This is used for legacy OFDM rate only.
         u8		STBC:2;
         u8		AllowAggregation:1;
-        u8		RtsHT:1;                //Interpre RtsRate field as high throughput data rate
+        u8		RtsHT:1;                //Interprete RtsRate field as high throughput data rate
         u8		RtsShort:1;             //Short PLCP for CCK, or short GI for 11n MCS
         u8		RtsBandwidth:1;         // This is used for HT MCS rate only.
         u8		RtsSubcarrier:2;        // This is used for legacy OFDM rate only.
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 9c00865f302a..be860456d726 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -203,7 +203,7 @@ static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv* priv)
 		{
 			Dot11d_Init(ieee);
 			ieee->bGlobalDomain = false;
-			//acturally 8225 & 8256 rf chip only support B,G,24N mode
+			//actually 8225 & 8256 rf chip only support B,G,24N mode
 			if ((priv->rf_chip == RF_8225) || (priv->rf_chip == RF_8256))
 			{
 				min_chan = 1;
@@ -1103,7 +1103,7 @@ inline u16 rtl8192_rate2rate(short rate)
 }
 
 
-/* The protype of rx_isr has changed since one verion of Linux Kernel */
+/* The prototype of rx_isr has changed since one version of Linux Kernel */
 static void rtl8192_rx_isr(struct urb *urb)
 {
 	struct sk_buff *skb = (struct sk_buff *) urb->context;
@@ -1476,7 +1476,7 @@ static void rtl8192_tx_isr(struct urb *tx_urb)
 	if(tcb_desc->queue_index != TXCMD_QUEUE) {
 		if(tx_urb->status == 0) {
 			dev->trans_start = jiffies;
-			// As act as station mode, destion shall be  unicast address.
+			// As act as station mode, destination shall be unicast address.
 			//priv->ieee80211->stats.tx_bytes+=(skb->len - priv->ieee80211->tx_headroom);
 			//priv->ieee80211->stats.tx_packets++;
 			priv->stats.txoktotal++;
@@ -1522,13 +1522,13 @@ static void rtl8192_tx_isr(struct urb *tx_urb)
 			else if ((skb_queue_len(&priv->ieee80211->skb_drv_aggQ[queue_index])!= 0)&&\
 				(!(priv->ieee80211->queue_stop))) {
 				// Tx Driver Aggregation process
-				/* The driver will aggregation the packets according to the following stets
+				/* The driver will aggregation the packets according to the following stats
 				 * 1. check whether there's tx irq available, for it's a completion return
 				 *    function, it should contain enough tx irq;
-				 * 2. check pakcet type;
+				 * 2. check packet type;
 				 * 3. initialize sendlist, check whether the to-be send packet no greater than 1
-				 * 4. aggregation the packets, and fill firmware info and tx desc to it, etc.
-				 * 5. check whehter the packet could be sent, otherwise just insert to wait head
+				 * 4. aggregates the packets, and fill firmware info and tx desc to it, etc.
+				 * 5. check whether the packet could be sent, otherwise just insert to wait head
 				 * */
 				skb = skb_dequeue(&priv->ieee80211->skb_drv_aggQ[queue_index]);
 				if(!check_nic_enough_desc(dev, queue_index)) {
@@ -2447,7 +2447,7 @@ static int rtl8192_qos_handle_probe_response(struct r8192_priv *priv,
 	return 0;
 }
 
-/* handle manage frame frame beacon and probe response */
+/* handle and manage frame from beacon and probe response */
 static int rtl8192_handle_beacon(struct net_device * dev,
 			      struct ieee80211_beacon * beacon,
 			      struct ieee80211_network * network)
@@ -2625,7 +2625,7 @@ bool GetHalfNmodeSupportByAPs819xUsb(struct net_device* dev)
 void rtl8192_refresh_supportrate(struct r8192_priv* priv)
 {
 	struct ieee80211_device* ieee = priv->ieee80211;
-	//we donot consider set support rate for ABG mode, only HT MCS rate is set here.
+	//we do not consider set support rate for ABG mode, only HT MCS rate is set here.
 	if (ieee->mode == WIRELESS_MODE_N_24G || ieee->mode == WIRELESS_MODE_N_5G)
 	{
 		memcpy(ieee->Regdot11HTOperationalRateSet, ieee->RegHTSuppRateSet, 16);
@@ -2780,10 +2780,10 @@ static void rtl8192_init_priv_variable(struct net_device* dev)
 	priv->TransmitConfig =
 	//	TCR_DurProcMode |	//for RTL8185B, duration setting by HW
 	//?	TCR_DISReqQsize |
-		(TCR_MXDMA_2048<<TCR_MXDMA_OFFSET)|  // Max DMA Burst Size per Tx DMA Burst, 7: reservied.
+		(TCR_MXDMA_2048<<TCR_MXDMA_OFFSET)|  // Max DMA Burst Size per Tx DMA Burst, 7: reserved.
 		(priv->ShortRetryLimit<<TCR_SRL_OFFSET)|	// Short retry limit
 		(priv->LongRetryLimit<<TCR_LRL_OFFSET) |	// Long retry limit
-		(false ? TCR_SAT: 0);	// FALSE: HW provies PLCP length and LENGEXT, TURE: SW proiveds them
+		(false ? TCR_SAT: 0);	// FALSE: HW provides PLCP length and LENGEXT, TURE: SW provides them
 #ifdef TO_DO_LIST
 	if(Adapter->bInHctTest)
 		pHalData->ReceiveConfig	=	pHalData->CSMethod |
@@ -3437,7 +3437,7 @@ if(Adapter->ResetProgress == RESET_TYPE_NORESET)
 		{ // User disable RF via registry.
 			RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n"));
 			MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW);
-			// Those action will be discard in MgntActSet_RF_State because off the same state
+			// Those action will be discard in MgntActSet_RF_State because of the same state
 			for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
 				PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
 		}
@@ -3458,7 +3458,7 @@ if(Adapter->ResetProgress == RESET_TYPE_NORESET)
 		if(pHalData->eRFPowerState == eRfOff)
 		{
 			MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
-			// Those action will be discard in MgntActSet_RF_State because off the same state
+			// Those action will be discard in MgntActSet_RF_State because of the same state
 			for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
 				PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
 		}
@@ -3586,7 +3586,7 @@ TxCheckStuck(struct net_device *dev)
 	//unsigned long flags;
 
 	//
-	// Decide Stuch threshold according to current power save mode
+	// Decide such threshold according to current power save mode
 	//
 
 //     RT_TRACE(COMP_RESET, " ==> TxCheckStuck()\n");
@@ -3745,7 +3745,7 @@ rtl819x_ifcheck_resetornot(struct net_device *dev)
 
 		// Driver should not check RX stuck in IBSS mode because it is required to
 		// set Check BSSID in order to send beacon, however, if check BSSID is
-		// set, STA cannot hear any packet a all. Emily, 2008.04.12
+		// set, STA cannot hear any packet at all. Emily, 2008.04.12
 		RxResetType = RxCheckStuck(dev);
 	}
 	if(TxResetType==RESET_TYPE_NORMAL || RxResetType==RESET_TYPE_NORMAL)
@@ -3962,7 +3962,7 @@ RESET_START:
 		up(&priv->wx_sem);
 		RT_TRACE(COMP_RESET,"%s():<==========down process is finished\n",__FUNCTION__);
 	//rtl8192_irq_disable(dev);
-		RT_TRACE(COMP_RESET,"%s():===========>start to up the driver\n",__FUNCTION__);
+		RT_TRACE(COMP_RESET,"%s():===========>start up the driver\n",__FUNCTION__);
 		reset_status = _rtl8192_up(dev);
 
 		RT_TRACE(COMP_RESET,"%s():<===========up process is finished\n",__FUNCTION__);
@@ -4155,7 +4155,7 @@ extern	void	rtl819x_watchdog_wqcallback(struct work_struct *work)
 void watch_dog_timer_callback(unsigned long data)
 {
 	struct r8192_priv *priv = ieee80211_priv((struct net_device *) data);
-	//printk("===============>watch_dog  timer\n");
+	//printk("===============>watch_dog timer\n");
 	queue_delayed_work(priv->priv_wq,&priv->watch_dog_wq, 0);
 	mod_timer(&priv->watch_dog_timer, jiffies + MSECS(IEEE80211_WATCH_DOG_TIME));
 }
@@ -4170,7 +4170,7 @@ int _rtl8192_up(struct net_device *dev)
 	init_status = rtl8192_adapter_start(dev);
 	if(!init_status)
 	{
-		RT_TRACE(COMP_ERR,"ERR!!! %s(): initialization is failed!\n", __FUNCTION__);
+		RT_TRACE(COMP_ERR,"ERR!!! %s(): initialization failed!\n", __FUNCTION__);
 		priv->up=priv->ieee80211->ieee_up = 0;
 		return -EAGAIN;
 	}
@@ -4256,7 +4256,7 @@ int rtl8192_down(struct net_device *dev)
 		skb_queue_purge(&priv->ieee80211->skb_drv_aggQ [i]);
 	}
 
-	//as cancel_delayed_work will del work->timer, so if work is not definedas struct delayed_work, it will corrupt
+	//as cancel_delayed_work will del work->timer, so if work is not defined as struct delayed_work, it will corrupt
 //	flush_scheduled_work();
 	rtl8192_cancel_deferred_work(priv);
 	deinit_hal_dm(dev);
@@ -4516,7 +4516,7 @@ u8 HwRateToMRate90(bool bIsHT, u8 rate)
 
 /**
  * Function:     UpdateRxPktTimeStamp
- * Overview:     Recored down the TSF time stamp when receiving a packet
+ * Overview:     Record down the TSF time stamp when receiving a packet
  *
  * Input:
  *       PADAPTER        Adapter
@@ -4556,9 +4556,9 @@ long rtl819x_translate_todbm(u8 signal_strength_index	)// 0-100 index.
 }
 
 
-/* 2008/01/22 MH We can not delcare RSSI/EVM total value of sliding window to
+/* 2008/01/22 MH We can not declare RSSI/EVM total value of sliding window to
     be a local static. Otherwise, it may increase when we return from S3/S4. The
-    value will be kept in memory or disk. We must delcare the value in adapter
+    value will be kept in memory or disk. We must declare the value in adapter
     and it will be reinitialized when return from S3/S4. */
 void rtl8192_process_phyinfo(struct r8192_priv * priv,u8* buffer, struct ieee80211_rx_stats * pprevious_stats, struct ieee80211_rx_stats * pcurrent_stats)
 {
@@ -5091,7 +5091,7 @@ static void rtl8192_query_rxphystatus(
 			tmp_rxevm =	pofdm_buf->rxevm_X[i];
 			rx_evmX = (char)(tmp_rxevm);
 
-			// Do not use shift operation like "rx_evmX >>= 1" because the compilor of free build environment
+			// Do not use shift operation like "rx_evmX >>= 1" because the compiler of free build environment
 			// fill most significant bit to "zero" when doing shifting operation which may change a negative
 			// value to positive one, then the dbm value (which is supposed to be negative)  is not correct anymore.
 			rx_evmX /= 2;	//dbm
@@ -5171,7 +5171,7 @@ void TranslateRxSignalStuff819xUsb(struct sk_buff *skb,
 	type = WLAN_FC_GET_TYPE(fc);
 	praddr = hdr->addr1;
 
-	/* Check if the received packet is acceptabe. */
+	/* Check if the received packet is acceptable. */
 	bpacket_match_bssid = ((IEEE80211_FTYPE_CTL != type) &&
 							(eqMacAddr(priv->ieee80211->current_network.bssid,  (fc & IEEE80211_FCTL_TODS)? hdr->addr1 : (fc & IEEE80211_FCTL_FROMDS )? hdr->addr2 : hdr->addr3))
 								 && (!pstats->bHwError) && (!pstats->bCRC)&& (!pstats->bICV));
@@ -5211,7 +5211,7 @@ void TranslateRxSignalStuff819xUsb(struct sk_buff *skb,
 
 /**
 * Function:	UpdateReceivedRateHistogramStatistics
-* Overview:	Recored down the received data rate
+* Overview:	Record down the received data rate
 *
 * Input:
 * 	struct net_device *dev
@@ -5401,7 +5401,7 @@ void query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats,
 	}
 
 #ifdef USB_RX_AGGREGATION_SUPPORT
-	/* for the rx aggregated sub frame, the redundant space truelly contained in the packet */
+	/* for the rx aggregated sub frame, the redundant space truly contained in the packet */
 	if(bIsRxAggrSubframe) {
 		skb_pull(skb, 8);
 	}
@@ -5480,7 +5480,7 @@ void rtl8192_rx_nomal(struct sk_buff* skb)
 			PacketShiftBytes = GetRxPacketShiftBytes819xUsb(&stats, false);
 		}
 #endif
-		/* Process the MPDU recevied */
+		/* Process the MPDU received */
 		skb_trim(skb, skb->len - 4/*sCrcLng*/);
 
 		rx_pkt_len = skb->len;
@@ -5538,7 +5538,7 @@ void rtl8192_rx_nomal(struct sk_buff* skb)
 				if(PacketLength > agg_skb->len) {
 					break;
 				}
-				/* Process the MPDU recevied */
+				/* Process the MPDU received */
 				skb = dev_alloc_skb(PacketLength);
 				memcpy(skb_put(skb,PacketLength),agg_skb->data, PacketLength);
 				skb_trim(skb, skb->len - 4/*sCrcLng*/);
diff --git a/drivers/staging/rtl8192u/r8192U_dm.c b/drivers/staging/rtl8192u/r8192U_dm.c
index 2dde9fa5c21e..3f79e61399ef 100644
--- a/drivers/staging/rtl8192u/r8192U_dm.c
+++ b/drivers/staging/rtl8192u/r8192U_dm.c
@@ -38,7 +38,7 @@ static u32 edca_setting_UL[HT_IOT_PEER_MAX] =
 /*------------------------Define global variable-----------------------------*/
 // Debug variable ?
 dig_t	dm_digtable;
-// Store current shoftware write register content for MAC PHY.
+// Store current software write register content for MAC PHY.
 u8		dm_shadow[16][256] = {{0}};
 // For Dynamic Rx Path Selection by Signal Strength
 DRxPathSel	DM_RxPathSelTable;
@@ -119,7 +119,7 @@ static	void	dm_pd_th(struct net_device *dev);
 static	void	dm_cs_ratio(struct net_device *dev);
 
 static	void dm_init_ctstoself(struct net_device *dev);
-// DM --> EDCA turboe mode control
+// DM --> EDCA turbo mode control
 static	void	dm_check_edca_turbo(struct net_device *dev);
 
 // DM --> HW RF control
@@ -348,7 +348,7 @@ extern void init_rate_adaptive(struct net_device * dev)
  *
  * Revised History:
  *	When		Who		Remark
- *	05/26/08	amy 	Create version 0 proting from windows code.
+ *	05/26/08	amy 	Create version 0 porting from windows code.
  *
  *---------------------------------------------------------------------------*/
 static void dm_check_rate_adaptive(struct net_device * dev)
@@ -543,7 +543,7 @@ static u32 OFDMSwingTable[OFDM_Table_Length] = {
 	0x5a400169,	// 3, +3db
 	0x50800142,	// 4, +2db
 	0x47c0011f,	// 5, +1db
-	0x40000100,	// 6, +0db ===> default, upper for higher temprature, lower for low temprature
+	0x40000100,	// 6, +0db ===> default, upper for higher temperature, lower for low temperature
 	0x390000e4,	// 7, -1db
 	0x32c000cb,	// 8, -2db
 	0x2d4000b5,	// 9, -3db
@@ -678,7 +678,7 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device * dev)
 		{
 			write_nic_byte(dev, 0x1ba, 0);
 			viviflag = FALSE;
-			RT_TRACE(COMP_POWER_TRACKING, "we filted this data\n");
+			RT_TRACE(COMP_POWER_TRACKING, "we filtered the data\n");
 			for(k = 0;k < 5; k++)
 				tmp_report[k] = 0;
 			break;
@@ -864,14 +864,14 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device * dev)
 	RT_TRACE(COMP_POWER_TRACKING, "Readback ThermalMeterA = %d \n", tmpRegA);
 	if(tmpRegA < 3 || tmpRegA > 13)
 		return;
-	if(tmpRegA >= 12)	// if over 12, TP will be bad when high temprature
+	if(tmpRegA >= 12)	// if over 12, TP will be bad when high temperature
 		tmpRegA = 12;
 	RT_TRACE(COMP_POWER_TRACKING, "Valid ThermalMeterA = %d \n", tmpRegA);
 	priv->ThermalMeter[0] = ThermalMeterVal;	//We use fixed value by Bryant's suggestion
 	priv->ThermalMeter[1] = ThermalMeterVal;	//We use fixed value by Bryant's suggestion
 
-	//Get current RF-A temprature index
-	if(priv->ThermalMeter[0] >= (u8)tmpRegA)	//lower temprature
+	//Get current RF-A temperature index
+	if(priv->ThermalMeter[0] >= (u8)tmpRegA)	//lower temperature
 	{
 		tmpOFDMindex = tmpCCK20Mindex = 6+(priv->ThermalMeter[0]-(u8)tmpRegA);
 		tmpCCK40Mindex = tmpCCK20Mindex - 6;
@@ -885,7 +885,7 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device * dev)
 	else
 	{
 		tmpval = ((u8)tmpRegA - priv->ThermalMeter[0]);
-		if(tmpval >= 6)								// higher temprature
+		if(tmpval >= 6)								// higher temperature
 			tmpOFDMindex = tmpCCK20Mindex = 0;		// max to +6dB
 		else
 			tmpOFDMindex = tmpCCK20Mindex = 6 - tmpval;
@@ -1457,9 +1457,9 @@ static void dm_InitializeTXPowerTracking_ThermalMeter(struct net_device *dev)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
 
-	// Tx Power tracking by Theremal Meter require Firmware R/W 3-wire. This mechanism
+	// Tx Power tracking by Thermal Meter require Firmware R/W 3-wire. This mechanism
 	// can be enabled only when Firmware R/W 3-wire is enabled. Otherwise, frequent r/w
-	// 3-wire by driver cause RF goes into wrong state.
+	// 3-wire by driver causes RF to go into a wrong state.
 	if(priv->ieee80211->FwRWRF)
 		priv->btxpower_tracking = TRUE;
 	else
@@ -1520,7 +1520,7 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
 
 	if(!TM_Trigger)
 	{
-		//Attention!! You have to wirte all 12bits data to RF, or it may cause RF to crash
+		//Attention!! You have to write all 12bits data to RF, or it may cause RF to crash
 		//actually write reg0x02 bit1=0, then bit1=1.
 		//DbgPrint("Trigger ThermalMeter, write RF reg0x2 = 0x4d to 0x4f\n");
 		rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
@@ -1744,7 +1744,7 @@ extern void dm_restore_dynamic_mechanism_state(struct net_device *dev)
 			write_nic_dword(dev, RATR0, ratr_value);
 			write_nic_byte(dev, UFWP, 1);
 	}
-	//Resore TX Power Tracking Index
+	//Restore TX Power Tracking Index
 	if(priv->btxpower_trackingInit && priv->btxpower_tracking){
 		dm_txpower_reset_recovery(dev);
 	}
@@ -2031,7 +2031,7 @@ static void dm_dig_init(struct net_device *dev)
 	dm_digtable.dbg_mode = DM_DBG_OFF;	//off=by real rssi value, on=by DM_DigTable.Rssi_val for new dig
 	dm_digtable.dig_algorithm_switch = 0;
 
-	/* 2007/10/04 MH Define init gain threshol. */
+	/* 2007/10/04 MH Define init gain threshold. */
 	dm_digtable.dig_state		= DM_STA_DIG_MAX;
 	dm_digtable.dig_highpwr_state	= DM_STA_DIG_MAX;
 	dm_digtable.initialgain_lowerbound_state = false;
@@ -2097,7 +2097,7 @@ static void dm_ctrl_initgain_byrssi_by_driverrssi(
 		return;
 
 	//DbgPrint("Dig by Sw Rssi \n");
-	if(dm_digtable.dig_algorithm_switch)	// if swithed algorithm, we have to disable FW Dig.
+	if(dm_digtable.dig_algorithm_switch)	// if switched algorithm, we have to disable FW Dig.
 		fw_dig = 0;
 	if(fw_dig <= 3)	// execute several times to make sure the FW Dig is disabled
 	{// FW DIG Off
@@ -2160,7 +2160,7 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
 	/*DbgPrint("DIG Check\n\r RSSI=%d LOW=%d HIGH=%d STATE=%d",
 	pHalData->UndecoratedSmoothedPWDB, DM_DigTable.RssiLowThresh,
 	DM_DigTable.RssiHighThresh, DM_DigTable.Dig_State);*/
-	/* 1. When RSSI decrease, We have to judge if it is smaller than a treshold
+	/* 1. When RSSI decrease, We have to judge if it is smaller than a threshold
 		  and then execute below step. */
 	if ((priv->undecorated_smoothed_pwdb <= dm_digtable.rssi_low_thresh))
 	{
@@ -2220,7 +2220,7 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
 
 	}
 
-	/* 2. When RSSI increase, We have to judge if it is larger than a treshold
+	/* 2. When RSSI increase, We have to judge if it is larger than a threshold
 		  and then execute below step.  */
 	if ((priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_thresh) )
 	{
@@ -2329,7 +2329,7 @@ static void dm_ctrl_initgain_byrssi_highpwr(
 	}
 
 	/* 3. When RSSI >75% or <70%, it is a high power issue. We have to judge if
-		  it is larger than a treshold and then execute below step.  */
+		  it is larger than a threshold and then execute below step.  */
 	// 2008/02/05 MH SD3-Jerry Modify PD_TH for high power issue.
 	if (priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_power_highthresh)
 	{
@@ -2841,8 +2841,8 @@ static void dm_check_rfctrl_gpio(struct net_device * dev)
 {
 	//struct r8192_priv *priv = ieee80211_priv(dev);
 
-	// Walk around for DTM test, we will not enable HW - radio on/off because r/w
-	// page 1 register before Lextra bus is enabled cause system fails when resuming
+	// Work around for DTM test, we will not enable HW - radio on/off because r/w
+	// page 1 register before extra bus is enabled causing system fails when resuming
 	// from S4. 20080218, Emily
 
 	// Stop to execute workitem to prevent S3/S4 bug.
@@ -3377,13 +3377,13 @@ extern void dm_fsync_timer_callback(unsigned long data)
 		{
 
 			u32 DiffNum = priv->rateCountDiffRecord - rate_count_diff;
-			// Contiune count
+			// Continue count
 			if(DiffNum >= priv->ieee80211->fsync_seconddiff_ratethreshold)
 				priv->ContiuneDiffCount++;
 			else
 				priv->ContiuneDiffCount = 0;
 
-			// Contiune count over
+			// Continue count over
 			if(priv->ContiuneDiffCount >=2)
 			{
 				bSwitchFromCountDiff = true;
@@ -3392,7 +3392,7 @@ extern void dm_fsync_timer_callback(unsigned long data)
 		}
 		else
 		{
-			// Stop contiune count
+			// Stop continue count
 			priv->ContiuneDiffCount = 0;
 		}
 
@@ -3523,7 +3523,7 @@ static void dm_StartSWFsync(struct net_device *dev)
 	RT_TRACE(COMP_HALDM,"%s\n", __FUNCTION__);
 	// Initial rate record to zero, start to record.
 	priv->rate_record = 0;
-	// Initial contiune diff count to zero, start to record.
+	// Initial continue diff count to zero, start to record.
 	priv->ContiuneDiffCount = 0;
 	priv->rateCountDiffRecord = 0;
 	priv->bswitch_fsync  = false;
@@ -3875,7 +3875,7 @@ static void dm_send_rssi_tofw(struct net_device *dev)
 
 	// If we test chariot, we should stop the TX command ?
 	// Because 92E will always silent reset when we send tx command. We use register
-	// 0x1e0(byte) to botify driver.
+	// 0x1e0(byte) to notify driver.
 	write_nic_byte(dev, DRIVER_RSSI, (u8)priv->undecorated_smoothed_pwdb);
 	return;
 	tx_cmd.Op		= TXCMD_SET_RX_RSSI;
diff --git a/drivers/staging/rtl8192u/r8192U_hw.h b/drivers/staging/rtl8192u/r8192U_hw.h
index e89aaf70143b..b0ee4ddc3766 100644
--- a/drivers/staging/rtl8192u/r8192U_hw.h
+++ b/drivers/staging/rtl8192u/r8192U_hw.h
@@ -10,7 +10,7 @@
 	Parts of this driver are based on the Intel Pro Wireless
 	2100 GPL driver.
 
-	We want to tanks the Authors of those projects
+	We want to thanks the Authors of those projects
 	and the Ndiswrapper project Authors.
 */
 
diff --git a/drivers/staging/rtl8192u/r8192U_wx.c b/drivers/staging/rtl8192u/r8192U_wx.c
index 981de9b87d68..2ce0fc8e3476 100644
--- a/drivers/staging/rtl8192u/r8192U_wx.c
+++ b/drivers/staging/rtl8192u/r8192U_wx.c
@@ -13,7 +13,7 @@
 
    Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.
 
-   We want to tanks the Authors of those projects and the Ndiswrapper
+   We want to thanks the Authors of those projects and the Ndiswrapper
    project Authors.
 */
 
@@ -256,7 +256,7 @@ static int r8192_wx_get_ap_status(struct net_device *dev,
 	//count the length of input ssid
 	for(name_len=0 ; ((char*)wrqu->data.pointer)[name_len]!='\0' ; name_len++);
 
-	//search for the correspoding info which is received
+	//search for the corresponding info which is received
 	list_for_each_entry(target, &ieee->network_list, list) {
 		if ( (target->ssid_len == name_len) &&
 		     (strncmp(target->ssid, (char*)wrqu->data.pointer, name_len)==0)){
@@ -419,7 +419,7 @@ static int rtl8180_wx_get_range(struct net_device *dev,
 	range->max_qual.updated = 7; /* Updated all three */
 
 	range->avg_qual.qual = 92; /* > 8% missed beacons is 'bad' */
-	/* TODO: Find real 'good' to 'bad' threshol value for RSSI */
+	/* TODO: Find real 'good' to 'bad' threshold value for RSSI */
 	range->avg_qual.level = 20 + -98;
 	range->avg_qual.noise = 0;
 	range->avg_qual.updated = 7; /* Updated all three */
@@ -1047,7 +1047,7 @@ static iw_handler r8192_wx_handlers[] =
 #else
 	 NULL,
 #endif
-	dummy,                     /* SIOCGIWAPLIST -- depricated */
+	dummy,                     /* SIOCGIWAPLIST -- deprecated */
 	r8192_wx_set_scan,        /* SIOCSIWSCAN */
 	r8192_wx_get_scan,        /* SIOCGIWSCAN */
 	r8192_wx_set_essid,       /* SIOCSIWESSID */
diff --git a/drivers/staging/rtl8192u/r8192U_wx.h b/drivers/staging/rtl8192u/r8192U_wx.h
index f4cf2801136a..138866433c71 100644
--- a/drivers/staging/rtl8192u/r8192U_wx.h
+++ b/drivers/staging/rtl8192u/r8192U_wx.h
@@ -7,7 +7,7 @@
 	Parts of this driver are based on the rtl8180 driver skeleton from Patric Schenke & Andres Salomon
 	Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
 
-	We want to tanks the Authors of such projects and the Ndiswrapper project Authors.
+	We want to thanks the Authors of such projects and the Ndiswrapper project Authors.
 */
 
 /* this file (will) contains wireless extension handlers*/
diff --git a/drivers/staging/rtl8192u/r819xU_HTType.h b/drivers/staging/rtl8192u/r819xU_HTType.h
index 2ac421626e7c..e07f8b17a0d6 100644
--- a/drivers/staging/rtl8192u/r819xU_HTType.h
+++ b/drivers/staging/rtl8192u/r819xU_HTType.h
@@ -211,7 +211,7 @@ typedef struct _RT_HIGH_THROUGHPUT{
 	u8				bEnableHT;
 	u8				bCurrentHTSupport;
 
-	u8				bRegBW40MHz;				// Tx 40MHz channel capablity
+	u8				bRegBW40MHz;				// Tx 40MHz channel capability
 	u8				bCurBW40MHz;				// Tx 40MHz channel capability
 
 	u8				bRegShortGI40MHz;			// Tx Short GI for 40Mhz
diff --git a/drivers/staging/rtl8192u/r819xU_cmdpkt.c b/drivers/staging/rtl8192u/r819xU_cmdpkt.c
index 9348f429d590..ec1eeb724b01 100644
--- a/drivers/staging/rtl8192u/r819xU_cmdpkt.c
+++ b/drivers/staging/rtl8192u/r819xU_cmdpkt.c
@@ -157,7 +157,7 @@ SendTxCommandPacket(
 		seg_ptr = skb_put(skb, buffer_len);
 		/*
 		 * Transform from little endian to big endian
-		 * and pending  zero
+		 * and pending zero
 		 */
 		memcpy(seg_ptr,codevirtualaddress,buffer_len);
 		tcb_desc->txbuf_size= (u16)buffer_len;
@@ -718,15 +718,15 @@ cmpk_message_handle_rx(
 	/* 2. Read virtual address from RFD. */
 	pcmd_buff = pstats->virtual_address;
 
-	/* 3. Read command pakcet element id and length. */
+	/* 3. Read command packet element id and length. */
 	element_id = pcmd_buff[0];
 	/*RT_TRACE(COMP_SEND, DebugLevel,
 			("\n\r[CMPK]-->element ID=%d Len=%d", element_id, total_length));*/
 
-	/* 4. Check every received command packet conent according to different
+	/* 4. Check every received command packet content according to different
 	      element type. Because FW may aggregate RX command packet to minimize
 	      transmit time between DRV and FW.*/
-	// Add a counter to prevent to locked in the loop too long
+	// Add a counter to prevent the lock in the loop to be to long
 	while (total_length > 0 || exe_cnt++ >100)
 	{
 		/* 2007/01/17 MH We support aggregation of different cmd in the same packet. */
diff --git a/drivers/staging/rtl8192u/r819xU_firmware.c b/drivers/staging/rtl8192u/r819xU_firmware.c
index 4bb5fffca5b9..fe5776d642f3 100644
--- a/drivers/staging/rtl8192u/r819xU_firmware.c
+++ b/drivers/staging/rtl8192u/r819xU_firmware.c
@@ -275,11 +275,11 @@ bool init_firmware(struct net_device *dev)
 
 	/*
 	 * Download boot, main, and data image for System reset.
-	 * Download data image for firmware reseta
+	 * Download data image for firmware reset
 	 */
 	for(init_step = starting_state; init_step <= FW_INIT_STEP2_DATA; init_step++) {
 		/*
-		 * Open Image file, and map file to contineous memory if open file success.
+		 * Open Image file, and map file to continuous memory if open file success.
 		 * or read image file from array. Default load from IMG file
 		 */
 		if(rst_opt == OPT_SYSTEM_RESET) {
diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c
index c4586b0817d1..636d6fd5b704 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.c
+++ b/drivers/staging/rtl8192u/r819xU_phy.c
@@ -40,7 +40,7 @@ static u32 RF_CHANNEL_TABLE_ZEBRA[] = {
  *	     and do register read/write
  *   input:  u32	dwBitMask  //taget bit pos in the addr to be modified
  *  output:  none
- *  return:  u32	return the shift bit bit position of the mask
+ *  return:  u32	return the shift bit position of the mask
  * ****************************************************************************/
 u32 rtl8192_CalculateBitShift(u32 dwBitMask)
 {
@@ -176,7 +176,7 @@ u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eRFPath,
 	rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2,  bLSSIReadEdge, 0x1);
 
 
-	// TODO: we should not delay such a  long time. Ask help from SD3
+	// TODO: we should not delay such a long time. Ask help from SD3
 	msleep(1);
 
 	ret = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData);
@@ -252,7 +252,7 @@ void rtl8192_phy_RFSerialWrite(struct net_device* dev, RF90_RADIO_PATH_E eRFPath
 		NewOffset = Offset;
 	}
 
-	// Put write addr in [5:0]  and write data in [31:16]
+	// Put write addr in [5:0] and write data in [31:16]
 	DataAndAddr = (Data<<16) | (NewOffset&0x3f);
 
 	// Write Operation
@@ -525,7 +525,7 @@ void rtl8192_phy_configmac(struct net_device* dev)
 }
 
 /******************************************************************************
- *function:  This function do dirty work
+ *function:  This function does dirty work
  *   input:  dev
  *  output:  none
  *  return:  none
@@ -578,7 +578,7 @@ void rtl8192_phyConfigBB(struct net_device* dev, u8 ConfigType)
 void rtl8192_InitBBRFRegDef(struct net_device* dev)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
-// RF Interface Sowrtware Control
+// RF Interface Software Control
 	priv->PHYRegDef[RF90_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 LSBs if read 32-bit from 0x870
 	priv->PHYRegDef[RF90_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 MSBs if read 32-bit from 0x870 (16-bit for 0x872)
 	priv->PHYRegDef[RF90_PATH_C].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 LSBs if read 32-bit from 0x874
@@ -602,7 +602,7 @@ void rtl8192_InitBBRFRegDef(struct net_device* dev)
 	priv->PHYRegDef[RF90_PATH_C].rfintfe = rFPGA0_XC_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86A (16-bit for 0x86A)
 	priv->PHYRegDef[RF90_PATH_D].rfintfe = rFPGA0_XD_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86C (16-bit for 0x86E)
 
-	//Addr of LSSI. Wirte RF register by driver
+	//Addr of LSSI. Write RF register by driver
 	priv->PHYRegDef[RF90_PATH_A].rf3wireOffset = rFPGA0_XA_LSSIParameter; //LSSI Parameter
 	priv->PHYRegDef[RF90_PATH_B].rf3wireOffset = rFPGA0_XB_LSSIParameter;
 	priv->PHYRegDef[RF90_PATH_C].rf3wireOffset = rFPGA0_XC_LSSIParameter;
@@ -1384,7 +1384,7 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8* stage, u
 }
 
 /******************************************************************************
- *function:  This function does acturally set channel work
+ *function:  This function does actually set channel work
  *   input:  struct net_device *dev
  *   	     u8 		channel
  *  output:  none
@@ -1425,7 +1425,7 @@ void rtl8192_SwChnl_WorkItem(struct net_device *dev)
 }
 
 /******************************************************************************
- *function:  This function scheduled actural workitem to set channel
+ *function:  This function scheduled actual workitem to set channel
  *   input:  net_device dev
  *   	     u8		channel //channel to set
  *  output:  none
diff --git a/drivers/staging/rtl8192u/r819xU_phyreg.h b/drivers/staging/rtl8192u/r819xU_phyreg.h
index 06b0b539e1bc..50f24dce8b16 100644
--- a/drivers/staging/rtl8192u/r819xU_phyreg.h
+++ b/drivers/staging/rtl8192u/r819xU_phyreg.h
@@ -443,7 +443,7 @@
 #define bCCKRxIG                  			0x7f00
 #define bCCKLNAPolarity           		0x800000
 #define bCCKRx1stGain             		0x7f0000
-#define bCCKRFExtend              		0x20000000 //CCK Rx Iinital gain polarity
+#define bCCKRFExtend              		0x20000000 //CCK Rx inital gain polarity
 #define bCCKRxAGCSatLevel        		0x1f000000
 #define bCCKRxAGCSatCount       		0xe0
 #define bCCKRxRFSettle            		0x1f       //AGCsamp_dly