diff options
| author | Bjorn Andersson <bjorn.andersson@linaro.org> | 2017-11-20 11:56:47 -0800 |
|---|---|---|
| committer | Ulf Hansson <ulf.hansson@linaro.org> | 2017-11-23 14:39:26 +0100 |
| commit | 52884f8f66c893e92a73787b5bef32b2ef52e1bc (patch) | |
| tree | f0467b6c0d5b7413d3d62c3e72d1d74ab6fd585e | |
| parent | f9f0da98819503b06b35e61869d18cf3a8cd3323 (diff) | |
| download | talos-op-linux-52884f8f66c893e92a73787b5bef32b2ef52e1bc.tar.gz talos-op-linux-52884f8f66c893e92a73787b5bef32b2ef52e1bc.zip | |
mmc: sdhci-msm: Optionally wait for signal level changes
Not all instances of the SDCC core supports changing signal voltage and
as such will not generate a power interrupt when the software attempts
to change the voltage. This results in probing the eMMC on some devices
to take over 2 minutes.
Check that the SWITCHABLE_SIGNALING_VOLTAGE bit in MCI_GENERICS is set
before waiting for the power interrupt.
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Vijay Viswanath <vviswana@codeaurora.org>
Fixes: c0309b3803fe ("mmc: sdhci-msm: Add sdhci msm register write APIs which wait for pwr irq")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| -rw-r--r-- | drivers/mmc/host/sdhci-msm.c | 14 |
1 files changed, 14 insertions, 0 deletions
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index 3fb7d2eec93f..c283291db705 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -29,6 +29,9 @@ #define CORE_VERSION_MAJOR_MASK (0xf << CORE_VERSION_MAJOR_SHIFT) #define CORE_VERSION_MINOR_MASK 0xff +#define CORE_MCI_GENERICS 0x70 +#define SWITCHABLE_SIGNALING_VOLTAGE BIT(29) + #define CORE_HC_MODE 0x78 #define HC_MODE_EN 0x1 #define CORE_POWER 0x0 @@ -1028,12 +1031,23 @@ static void sdhci_msm_check_power_status(struct sdhci_host *host, u32 req_type) struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); bool done = false; + u32 val; pr_debug("%s: %s: request %d curr_pwr_state %x curr_io_level %x\n", mmc_hostname(host->mmc), __func__, req_type, msm_host->curr_pwr_state, msm_host->curr_io_level); /* + * The power interrupt will not be generated for signal voltage + * switches if SWITCHABLE_SIGNALING_VOLTAGE in MCI_GENERICS is not set. + */ + val = readl(msm_host->core_mem + CORE_MCI_GENERICS); + if ((req_type & REQ_IO_HIGH || req_type & REQ_IO_LOW) && + !(val & SWITCHABLE_SIGNALING_VOLTAGE)) { + return; + } + + /* * The IRQ for request type IO High/LOW will be generated when - * there is a state change in 1.8V enable bit (bit 3) of * SDHCI_HOST_CONTROL2 register. The reset state of that bit is 0 |
