diff options
author | Vivek Gautam <vivek.gautam@codeaurora.org> | 2017-07-31 12:14:44 +0530 |
---|---|---|
committer | Andy Gross <andy.gross@linaro.org> | 2017-08-08 16:29:52 -0500 |
commit | 1e39255ed29dbd1801de91f78c5bc17e72481f68 (patch) | |
tree | 491c6a83f711439a31705d8f3a4e3cb851228e7d | |
parent | 12c67fe688e63a0a539a980212fa49d207661d5d (diff) | |
download | talos-op-linux-1e39255ed29dbd1801de91f78c5bc17e72481f68.tar.gz talos-op-linux-1e39255ed29dbd1801de91f78c5bc17e72481f68.zip |
arm64: dts: msm8996: Add device node for qcom,dwc3
Adding required device node for couple of DWC3 controllers
present on msm8996 chipset to enable High speed and Super
speed USB support.
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
-rw-r--r-- | arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi | 24 | ||||
-rw-r--r-- | arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 34 | ||||
-rw-r--r-- | arch/arm64/boot/dts/qcom/msm8996.dtsi | 57 |
3 files changed, 115 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi index b1142c45fdc9..8e379782597a 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi @@ -24,4 +24,28 @@ power-source = <PM8994_GPIO_S4>; // 1.8V }; }; + + usb3_vbus_det_gpio: pm8996_gpio22 { + pinconf { + pins = "gpio22"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + bias-pull-down; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; // 1.8V + }; + }; +}; + +&pmi8994_gpios { + usb2_vbus_det_gpio: pmi8996_gpio6 { + pinconf { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + bias-pull-down; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; // 1.8V + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index f05a64bad7ff..bbdc106effca 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -13,6 +13,7 @@ #include "msm8996.dtsi" #include "pm8994.dtsi" +#include "pmi8994.dtsi" #include "apq8096-db820c-pins.dtsi" #include "apq8096-db820c-pmic-pins.dtsi" #include <dt-bindings/input/input.h> @@ -104,6 +105,39 @@ phy@7412000 { status = "okay"; }; + + usb@6a00000 { + status = "okay"; + + dwc3@6a00000 { + extcon = <&usb3_id>; + dr_mode = "otg"; + }; + }; + + usb3_id: usb3-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_vbus_det_gpio>; + }; + + usb@7600000 { + status = "okay"; + + dwc3@7600000 { + extcon = <&usb2_id>; + dr_mode = "otg"; + maximum-speed = "high-speed"; + }; + }; + + usb2_id: usb2-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_vbus_det_gpio>; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 27e16762aaca..ca4191d24fd3 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -684,6 +684,63 @@ nvmem-cells = <&qusb2s_hstx_trim>; status = "disabled"; }; + + usb2: usb@7600000 { + compatible = "qcom,dwc3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>, + <&gcc GCC_USB20_MASTER_CLK>, + <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_SLEEP_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; + + assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>; + assigned-clock-rates = <19200000>, <60000000>; + + power-domains = <&gcc USB30_GDSC>; + status = "disabled"; + + dwc3@7600000 { + compatible = "snps,dwc3"; + reg = <0x7600000 0xcc00>; + interrupts = <0 138 0>; + phys = <&hsusb_phy2>; + phy-names = "usb2-phy"; + }; + }; + + usb3: usb@6a00000 { + compatible = "qcom,dwc3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_AGGRE2_USB3_AXI_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <120000000>; + + power-domains = <&gcc USB30_GDSC>; + status = "disabled"; + + dwc3@6a00000 { + compatible = "snps,dwc3"; + reg = <0x6a00000 0xcc00>; + interrupts = <0 131 0>; + phys = <&hsusb_phy1>, <&ssusb_phy_0>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; }; adsp-pil { |