rt_xstop_analysis: move firdata code from occ_405 to occ_gpe0

Change-Id: Idaafd3bd9d40cfce4afd7b5d3308cd376f443967
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/43242
Reviewed-by: Zane C. Shelley <zshelle@us.ibm.com>
Reviewed-by: ILYA SMIRNOV <ismirno@us.ibm.com>
Reviewed-by: Brian J. Stegmiller <bjs@us.ibm.com>
Reviewed-by: William A. Bryan <wilbryan@us.ibm.com>
Tested-by: William A. Bryan <wilbryan@us.ibm.com>

1 files changed, 0 insertions, 326 deletions

diff --git a/src/occ_405/firdata/ast_mboxdd.c b/src/occ_405/firdata/ast_mboxdd.c
deleted file mode 100644
index 064bcca..0000000
--- a/src/occ_405/firdata/ast_mboxdd.c
+++ /dev/null
@@ -1,326 +0,0 @@
-/* IBM_PROLOG_BEGIN_TAG                                                   */
-/* This is an automatically generated prolog.                             */
-/*                                                                        */
-/* $Source: src/occ_405/firdata/ast_mboxdd.c $                            */
-/*                                                                        */
-/* OpenPOWER OnChipController Project                                     */
-/*                                                                        */
-/* Contributors Listed Below - COPYRIGHT 2017                             */
-/* [+] International Business Machines Corp.                              */
-/*                                                                        */
-/*                                                                        */
-/* Licensed under the Apache License, Version 2.0 (the "License");        */
-/* you may not use this file except in compliance with the License.       */
-/* You may obtain a copy of the License at                                */
-/*                                                                        */
-/*     http://www.apache.org/licenses/LICENSE-2.0                         */
-/*                                                                        */
-/* Unless required by applicable law or agreed to in writing, software    */
-/* distributed under the License is distributed on an "AS IS" BASIS,      */
-/* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or        */
-/* implied. See the License for the specific language governing           */
-/* permissions and limitations under the License.                         */
-/*                                                                        */
-/* IBM_PROLOG_END_TAG                                                     */
-/**
- *  @file ast_mboxdd.C
- *
- *  @brief Implementation of the PNOR Accesser using the AST MBOX protocol
- */
-
-/*****************************************************************************/
-// I n c l u d e s
-/*****************************************************************************/
-#include <native.h>
-#include <norflash.h>
-#include <ast_mboxdd.h>
-#include <lpc.h>
-
-errorHndl_t writeRegSIO(uint8_t i_regAddr, uint8_t i_data)
-{
-    errorHndl_t l_err = NO_ERROR;
-
-    do {
-        size_t reg_size = sizeof(uint8_t);
-
-        /* Write out the register address */
-        l_err = lpc_write( LPC_TRANS_IO, SIO_ADDR_REG_2E,
-                           &i_regAddr,
-                           reg_size );
-        if( l_err ) { break; }
-
-        /* Write out the register data */
-        l_err = lpc_write( LPC_TRANS_IO, SIO_DATA_REG_2F,
-                           &i_data,
-                           reg_size );
-        if( l_err ) { break; }
-
-    } while(0);
-
-    return l_err;
-}
-
-errorHndl_t readRegSIO(uint8_t i_regAddr, uint8_t* o_data)
-{
-    errorHndl_t l_err = NO_ERROR;
-
-    do {
-        size_t reg_size = sizeof(uint8_t);
-
-        /* Write out the register address */
-         l_err = lpc_write( LPC_TRANS_IO, SIO_ADDR_REG_2E,
-                           &i_regAddr,
-                           reg_size );
-        if( l_err ) { break; }
-
-        /* Read in the register data */
-        l_err = lpc_read( LPC_TRANS_IO, SIO_DATA_REG_2F,
-                          o_data,
-                          reg_size );
-        if( l_err ) { break; }
-
-    } while(0);
-
-    return l_err;
-}
-
-errorHndl_t mboxOut(uint64_t i_addr, uint8_t i_byte)
-{
-    size_t len = sizeof(i_byte);
-
-    return lpc_write( LPC_TRANS_IO,
-                      i_addr + MBOX_IO_BASE,
-                      &i_byte,
-                      len );
-}
-
-errorHndl_t mboxIn(uint64_t i_addr, uint8_t *o_byte)
-{
-    size_t len = sizeof(uint8_t);
-
-    return lpc_read( LPC_TRANS_IO,
-                     i_addr + MBOX_IO_BASE,
-                     o_byte,
-                     len );
-}
-
-errorHndl_t doMessage( astMbox_t *io_mbox, mboxMessage_t *io_msg )
-{
-    uint8_t* l_data = (uint8_t*)io_msg;
-    errorHndl_t l_err = NO_ERROR;
-    uint8_t l_stat1;
-    uint32_t l_loops = 0;
-    bool l_prot_error = false;
-    int i;
-
-    io_msg->iv_seq = io_mbox->iv_mboxMsgSeq++;
-
-    do
-    {
-        /* Write message out */
-        for (i = 0; i < BMC_MBOX_DATA_REGS && !l_err; i++)
-        {
-            l_err = mboxOut(i, l_data[i]);
-        }
-
-        if ( l_err )
-        {
-            break;
-        }
-
-        /* Clear status1 response bit as it was just set via reg write*/
-        l_err = mboxOut(MBOX_STATUS_1, MBOX_STATUS1_RESP);
-
-        if ( l_err )
-        {
-            break;
-        }
-
-        /* Ping BMC */
-        l_err = mboxOut(MBOX_HOST_CTRL, MBOX_CTRL_INT_SEND);
-
-        if ( l_err )
-        {
-            break;
-        }
-
-        /* Wait for response */
-        while ( l_loops++ < MBOX_MAX_RESP_WAIT_US && !l_err )
-        {
-            l_err = mboxIn(MBOX_STATUS_1, &l_stat1);
-
-            if ( l_err )
-            {
-                TRAC_ERR("doMessage error from MBOX_STATUS_1");
-                break;
-            }
-
-            if ( l_stat1 & MBOX_STATUS1_RESP )
-            {
-                break;
-            }
-            sleep(1000);
-        }
-
-        if ( l_err )
-        {
-            TRAC_ERR( "Got error waiting for response !");
-            break;
-        }
-
-        if ( !(l_stat1 & MBOX_STATUS1_RESP) )
-        {
-            TRAC_ERR( "Timeout waiting for response !");
-
-            // Don't try to interrupt the BMC anymore
-            l_err = mboxOut(MBOX_HOST_CTRL, 0);
-            if ( l_err)
-            {
-                //Note the command failed
-                TRAC_ERR( "Error communicating with MBOX daemon");
-                TRAC_ERR( "Mbox status 1 reg: %x", l_stat1);
-            }
-
-            // Tell the code below that we generated the error
-            //  (not an LPC error)
-            l_prot_error = true;
-            break;
-        }
-
-        /* Clear status */
-        l_err = mboxOut(MBOX_STATUS_1, MBOX_STATUS1_RESP);
-        if (l_err)
-        {
-            TRAC_ERR( "Got error clearing status");
-            break;
-        }
-
-        // Remember some message fields before they get overwritten
-        // by the response
-        uint8_t old_seq = io_msg->iv_seq;
-
-        // Read response
-        for (i = 0; i < BMC_MBOX_DATA_REGS && !l_err; i++)
-        {
-            l_err = mboxIn(i, &l_data[i]);
-        }
-
-        if ( l_err )
-        {
-            TRAC_ERR( "Got error reading response !");
-            break;
-        }
-
-        if (old_seq != io_msg->iv_seq)
-        {
-            TRAC_ERR( "bad sequence number in mbox message, got %d want %d",
-                       io_msg->iv_seq, old_seq);
-            l_err = -1;
-            break;
-        }
-
-        if (io_msg->iv_resp != MBOX_R_SUCCESS)
-        {
-            TRAC_ERR( "BMC mbox command failed with err %d",
-                       io_msg->iv_resp);
-            l_err = -1;
-            // Tell code below that we generated the error (not an LPC error)
-            l_prot_error = true;
-            break;
-        }
-
-    }
-    while(0);
-
-    // If we got an LPC error, commit it and generate our own
-    if ( l_err && !l_prot_error )
-    {
-        l_err = -1;
-    }
-
-    return l_err;
-}
-
-errorHndl_t initializeMbox(void)
-{
-    errorHndl_t l_errl = NO_ERROR;
-
-    do
-    {
-        size_t reg_size = sizeof(uint8_t);
-
-        //First need to unlock SIO registers
-        /* Send SuperIO password - send A5 twice to offset 0x2E */
-        uint8_t data = SIO_PASSWORD_REG;
-        l_errl = lpc_write( LPC_TRANS_IO, SIO_ADDR_REG_2E,
-                           &data, reg_size );
-        if( l_errl ) { break; }
-
-        l_errl = lpc_write( LPC_TRANS_IO, SIO_ADDR_REG_2E,
-                           &data, reg_size );
-        if( l_errl ) { break; }
-
-        //Second need to select Mailbox SIO Device
-        //  Register 0x07 is device select reg
-        //  Device 0x0E is the sio mailbox device
-        l_errl = writeRegSIO( SIO_DEVICE_SELECT_REG, SIO_MB );
-        if( l_errl ) { break; }
-
-        //First disable SIO Mailbox engine to configure it
-        // 0x30 - Enable/Disable Reg
-        // 0x00 - Disable Device (previously selected mailbox device)
-        l_errl = writeRegSIO( 0x30, 0x00 );
-
-        if (l_errl)
-        {
-            break;
-        }
-
-        // Set MBOX Base Address
-        //Regs 0x60/0x61 are a BAR-like reg to configure the MBOX base address
-        l_errl = writeRegSIO( 0x60, (MBOX_IO_BASE >> 8) & 0xFF );
-
-        if (l_errl)
-        {
-            break;
-        }
-
-        // Set other half of MBOX Base Address
-        l_errl = writeRegSIO( 0x61, MBOX_IO_BASE & 0xFF );
-
-        if (l_errl)
-        {
-            break;
-        }
-
-        //Configure MBOX IRQs
-        //Regs 0x70 / 0x71 control that
-        l_errl = writeRegSIO( 0x70, MBOX_LPC_IRQ );
-
-        if (l_errl)
-        {
-            break;
-        }
-
-        //Other half of MBOX IRQ Configuration
-        // 1 == Low level trigger
-        l_errl = writeRegSIO( 0x71, 1 );
-
-        if (l_errl)
-        {
-            break;
-        }
-
-        //Re-enable Device now that base addr and IRQs are configured
-        // 1 == Enable Device
-        l_errl = writeRegSIO( 0x30, 0x01 );
-
-        if (l_errl)
-        {
-            break;
-        }
-    }
-    while(0);
-
-    return l_errl;
-}