summaryrefslogtreecommitdiffstats
path: root/doc/README.m53017evb
blob: 60cfa95af3c0d7667fff8316108aa57e33e8acc5 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
Freescale MCF53017EVB ColdFire Development Board
================================================

TsiChung Liew(Tsi-Chung.Liew@freescale.com)
Created 10/22/08
===========================================


Changed files:
==============

- board/freescale/m53017evb/m53017evb.c	Dram setup
- board/freescale/m53017evb/mii.c	Mii access
- board/freescale/m53017evb/Makefile	Makefile
- board/freescale/m53017evb/config.mk	config make
- board/freescale/m53017evb/u-boot.lds	Linker description

- cpu/mcf532x/cpu.c			cpu specific code
- cpu/mcf532x/cpu_init.c		FBCS, Mux pins, icache and RTC extra regs
- cpu/mcf532x/interrupts.c		cpu specific interrupt support
- cpu/mcf532x/speed.c			system, flexbus, and cpu clock
- cpu/mcf532x/Makefile			Makefile
- cpu/mcf532x/config.mk			config make
- cpu/mcf532x/start.S			start up assembly code

- doc/README.m53017evb			This readme file

- drivers/net/mcffec.c			ColdFire common FEC driver
- drivers/net/mcfmii.c			ColdFire common Mii driver
- drivers/serial/mcfuart.c		ColdFire common UART driver
- drivers/rtc/mcfrtc.c			Realtime clock Driver

- include/asm-m68k/bitops.h		Bit operation function export
- include/asm-m68k/byteorder.h		Byte order functions
- include/asm-m68k/fec.h		FEC structure and definition
- include/asm-m68k/fsl_i2c.h		I2C structure and definition
- include/asm-m68k/global_data.h	Global data structure
- include/asm-m68k/immap.h		ColdFire specific header file and driver macros
- include/asm-m68k/immap_5301x.h	mcf5301x specific header file
- include/asm-m68k/io.h			io functions
- include/asm-m68k/m532x.h		mcf5301x specific header file
- include/asm-m68k/posix_types.h	Posix
- include/asm-m68k/processor.h		header file
- include/asm-m68k/ptrace.h		Exception structure
- include/asm-m68k/rtc.h		Realtime clock header file
- include/asm-m68k/string.h		String function export
- include/asm-m68k/timer.h		Timer structure and definition
- include/asm-m68k/types.h		Data types definition
- include/asm-m68k/uart.h		Uart structure and definition
- include/asm-m68k/u-boot.h		u-boot structure

- include/configs/M53017EVB.h		Board specific configuration file

- lib_m68k/board.c			board init function
- lib_m68k/cache.c
- lib_m68k/interrupts			Coldfire common interrupt functions
- lib_m68k/m68k_linux.c
- lib_m68k/time.c			Timer functions (Dma timer and PIT)
- lib_m68k/traps.c			Exception init code

1 MCF5301x specific Options/Settings
====================================
1.1 pre-loader is no longer suppoer in thie coldfire family

1.2 Configuration settings for M53017EVB Development Board
CONFIG_MCF5301x			-- define for all MCF5301x CPUs
CONFIG_M53015			-- define for MCF53015 CPUs
CONFIG_M53017EVB		-- define for M53017EVB board

CONFIG_MCFUART			-- define to use common CF Uart driver
CONFIG_SYS_UART_PORT		-- define UART port number, start with 0, 1 and 2
CONFIG_BAUDRATE			-- define UART baudrate

CONFIG_MCFRTC			-- define to use common CF RTC driver
CONFIG_SYS_MCFRTC_BASE		-- provide base address for RTC in immap.h
CONFIG_SYS_RTC_OSCILLATOR	-- define RTC clock frequency
RTC_DEBUG			-- define to show RTC debug message
CONFIG_CMD_DATE			-- enable to use date feature in u-boot

CONFIG_MCFFEC			-- define to use common CF FEC driver
CONFIG_NET_MULTI		-- define to use multi FEC in u-boot
CONFIG_MII			-- enable to use MII driver
CONFIG_CF_DOMII			-- enable to use MII feature in cmd_mii.c
CONFIG_SYS_DISCOVER_PHY		-- enable PHY discovery
CONFIG_SYS_RX_ETH_BUFFER	-- Set FEC Receive buffer
CONFIG_SYS_FAULT_ECHO_LINK_DOWN	--
CONFIG_SYS_FEC0_PINMUX		-- Set FEC0 Pin configuration
CONFIG_SYS_FEC0_MIIBASE		-- Set FEC0 MII base register
MCFFEC_TOUT_LOOP		-- set FEC timeout loop

CONFIG_MCFTMR			-- define to use DMA timer
CONFIG_MCFPIT			-- define to use PIT timer

CONFIG_FSL_I2C			-- define to use FSL common I2C driver
CONFIG_HARD_I2C			-- define for I2C hardware support
CONFIG_SOFT_I2C			-- define for I2C bit-banged
CONFIG_SYS_I2C_SPEED		-- define for I2C speed
CONFIG_SYS_I2C_SLAVE		-- define for I2C slave address
CONFIG_SYS_I2C_OFFSET		-- define for I2C base address offset
CONFIG_SYS_IMMR			-- define for MBAR offset

CONFIG_SYS_MBAR			-- define MBAR offset

CONFIG_MONITOR_IS_IN_RAM 	-- Not support

CONFIG_SYS_INIT_RAM_ADDR	-- defines the base address of the MCF5301x internal SRAM

CONFIG_SYS_CSn_BASE		-- defines the Chip Select Base register
CONFIG_SYS_CSn_MASK		-- defines the Chip Select Mask register
CONFIG_SYS_CSn_CTRL		-- defines the Chip Select Control register

CONFIG_SYS_SDRAM_BASE		-- defines the DRAM Base

2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
===========================================
2.1. System memory map:
	Flash:		0x00000000-0x3FFFFFFF (1024MB)
	DDR:		0x40000000-0x7FFFFFFF (1024MB)
	SRAM:		0x80000000-0x8FFFFFFF (256MB)
	IP:		0xFC000000-0xFFFFFFFF (256MB)

2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and
	linux kernel, you can customize it based on your system requirements:
	Flash0:		0x00000000-0x00FFFFFF (16MB)
	DDR:		0x40000000-0x4FFFFFFF (256MB)
	SRAM:		0x80000000-0x80007FFF (32KB)
	IP:		0xFC000000-0xFC0FFFFF (64KB)

3. COMPILATION
==============
3.1	To create U-Boot the gcc-4.x-xx compiler set (ColdFire ELF or
uClinux version) from codesourcery.com was used. Download it from:
http://www.codesourcery.com/gnu_toolchains/coldfire/download.html

3.2 Compilation
   export CROSS_COMPILE=cross-compile-prefix
   cd u-boot
   make distclean
   make M53017EVB_config
   make

4. SCREEN DUMP
==============
4.1 M53017EVB Development board
    (NOTE: May not show exactly the same)

U-Boot 2008.10 (Oct 22 2007 - 11:07:57)

CPU:   Freescale MCF53015 (Mask:76 Version:0)
       CPU CLK 240 Mhz BUS CLK 80 Mhz
Board: Freescale M53017EVB
I2C:   ready
DRAM:  64 MB
FLASH: 16 MB
In:    serial
Out:   serial
Err:   serial
NAND:  16 MiB
Net:   FEC0, FEC1
-> print
bootdelay=1
baudrate=115200
ethaddr=00:e0:0c:bc:e5:60
hostname=M53017EVB
netdev=eth0
loadaddr=40010000
u-boot=u-boot.bin
load=tftp ${loadaddr) ${u-boot}
upd=run load; run prog
prog=prot off 0 3ffff;era 0 3ffff;cp.b ${loadaddr} 0 ${filesize};save
gatewayip=192.168.1.1
netmask=255.255.255.0
ipaddr=192.168.1.3
serverip=192.168.1.2
stdin=serial
stdout=serial
stderr=serial
mem=65024k

Environment size: 437/4092 bytes
->
OpenPOWER on IntegriCloud