1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
|
/*
* Copyright (C) 2001, 2002 ETC s.r.o.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
* 02111-1307, USA.
*
* Written by Marcel Telka <marcel@telka.sk>, 2001, 2002.
* Changes for U-Boot Peter Figuli <peposh@etc.sk>, 2003.
*
* This file is taken from OpenWinCE project hosted by SourceForge.net
*
* Documentation:
* [1] Intel Corporation, "Intel PXA250 and PXA210 Application Processors
* Developer's Manual", February 2002, Order Number: 278522-001
* [2] Samsung Electronics, "8Mx16 SDRAM 54CSP K4S281633D-RL/N/P",
* Revision 1.0, February 2002
* [3] Samsung Electronics, "16Mx16 SDRAM 54CSP K4S561633C-RL(N)",
* Revision 1.0, February 2002
*
*/
#include <config.h>
#include <version.h>
#include <asm/arch/pxa-regs.h>
.globl memsetup
memsetup:
mov r10, lr
/* setup memory - see 6.12 in [1]
* Step 1 - wait 200 us
*/
mov r0,#0x2700 /* wait 200 us @ 99.5 MHz */
1: subs r0, r0, #1
bne 1b
/* TODO: complete step 1 for Synchronous Static memory*/
ldr r0, =0x48000000 /* MC_BASE */
/* step 1.a - setup MSCx
*/
ldr r1, =0x000012B3 /* MSC0_RRR0(1) | MSC0_RDN0(2) | MSC0_RDF0(11) | MSC0_RT0(3) */
str r1, [r0, #0x8] /* MSC0_OFFSET */
/* step 1.c - clear MDREFR:K1FREE, set MDREFR:DRI
* see AUTO REFRESH chapter in section D. in [2] and in [3]
* DRI = (64ms / 4096) * 99.53MHz / 32 = 48 for K4S281633
* DRI = (64ms / 8192) * 99.52MHz / 32 = 24 for K4S561633
* TODO: complete for Synchronous Static memory
*/
ldr r1, [r0, #4] /* MDREFR_OFFSET */
ldr r2, =0x01000FFF /* MDREFR_K1FREE | MDREFR_DRI_MASK */
bic r1, r1, r2
#if defined( WEP_SDRAM_K4S281633 )
orr r1, r1, #48 /* MDREFR_DRI(48) */
#elif defined( WEP_SDRAM_K4S561633 )
orr r1, r1, #24 /* MDREFR_DRI(24) */
#else
#error SDRAM chip is not defined
#endif
str r1, [r0, #4] /* MDREFR_OFFSET */
/* Step 2 - only for Synchronous Static memory (TODO)
*
* Step 3 - same as step 4
*
* Step 4
*
* Step 4.a - set MDREFR:K1RUN, clear MDREFR:K1DB2
*/
orr r1, r1, #0x00010000 /* MDREFR_K1RUN */
bic r1, r1, #0x00020000 /* MDREFR_K1DB2 */
str r1, [r0, #4] /* MDREFR_OFFSET */
/* Step 4.b - clear MDREFR:SLFRSH */
bic r1, r1, #0x00400000 /* MDREFR_SLFRSH */
str r1, [r0, #4] /* MDREFR_OFFSET */
/* Step 4.c - set MDREFR:E1PIN */
orr r1, r1, #0x00008000 /* MDREFR_E1PIN */
str r1, [r0, #4] /* MDREFR_OFFSET */
/* Step 4.d - automatically done
*
* Steps 4.e and 4.f - configure SDRAM
*/
#if defined( WEP_SDRAM_K4S281633 )
ldr r1, =0x00000AA8 /* MDCNFG_DTC0(2) | MDCNFG_DLATCH0 | MDCNFG_DCAC0(1) | MDCNFG_DRAC0(1) | MDCNFG_DNB0 */
#elif defined( WEP_SDRAM_K4S561633 )
ldr r1, =0x00000AC8 /* MDCNFG_DTC0(2) | MDCNFG_DLATCH0 | MDCNFG_DCAC0(1) | MDCNFG_DRAC0(2) | MDCNFG_DNB0 */
#else
#error SDRAM chip is not defined
#endif
str r1, [r0, #0] /* MDCNFG_OFFSET */
/* Step 5 - wait at least 200 us for SDRAM
* see section B. in [2]
*/
mov r2,#0x2700 /* wait 200 us @ 99.5 MHz */
1: subs r2, r2, #1
bne 1b
/* Step 6 - after reset dcache is disabled, so automatically done
*
* Step 7 - eight refresh cycles
*/
mov r2, #0xA0000000
ldr r3, [r2]
ldr r3, [r2]
ldr r3, [r2]
ldr r3, [r2]
ldr r3, [r2]
ldr r3, [r2]
ldr r3, [r2]
ldr r3, [r2]
/* Step 8 - we don't need dcache now
*
* Step 9 - enable SDRAM partition 0
*/
orr r1, r1, #1 /* MDCNFG_DE0 */
str r1, [r0, #0] /* MDCNFG_OFFSET */
/* Step 10 - write MDMRS */
mov r1, #0
str r1, [r0, #0x40] /* MDMRS_OFFSET */
/* Step 11 - optional (TODO) */
mov pc,r10
|
