summaryrefslogtreecommitdiffstats
path: root/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
blob: c342217fa9185087d3e6a0866ad3c68e1ddc0abd (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
/*
 * Freescale i.MX28 Boot PMIC init
 *
 * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
 * on behalf of DENX Software Engineering GmbH
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#include <common.h>
#include <config.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>

#include "mxs_init.h"

#ifdef CONFIG_SYS_MXS_VDD5V_ONLY
#define DCDC4P2_DROPOUT_CONFIG	POWER_DCDC4P2_DROPOUT_CTRL_100MV | \
				POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2
#else
#define DCDC4P2_DROPOUT_CONFIG	POWER_DCDC4P2_DROPOUT_CTRL_100MV | \
				POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL
#endif
/**
 * mxs_power_clock2xtal() - Switch CPU core clock source to 24MHz XTAL
 *
 * This function switches the CPU core clock from PLL to 24MHz XTAL
 * oscilator. This is necessary if the PLL is being reconfigured to
 * prevent crash of the CPU core.
 */
static void mxs_power_clock2xtal(void)
{
	struct mxs_clkctrl_regs *clkctrl_regs =
		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;

	debug("SPL: Switching CPU clock to 24MHz XTAL\n");

	/* Set XTAL as CPU reference clock */
	writel(CLKCTRL_CLKSEQ_BYPASS_CPU,
		&clkctrl_regs->hw_clkctrl_clkseq_set);
}

/**
 * mxs_power_clock2pll() - Switch CPU core clock source to PLL
 *
 * This function switches the CPU core clock from 24MHz XTAL oscilator
 * to PLL. This can only be called once the PLL has re-locked and once
 * the PLL is stable after reconfiguration.
 */
static void mxs_power_clock2pll(void)
{
	struct mxs_clkctrl_regs *clkctrl_regs =
		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;

	debug("SPL: Switching CPU core clock source to PLL\n");

	/*
	 * TODO: Are we really? It looks like we turn on PLL0, but we then
	 * set the CLKCTRL_CLKSEQ_BYPASS_CPU bit of the (which was already
	 * set by mxs_power_clock2xtal()). Clearing this bit here seems to
	 * introduce some instability (causing the CPU core to hang). Maybe
	 * we aren't giving PLL0 enough time to stabilise?
	 */
	setbits_le32(&clkctrl_regs->hw_clkctrl_pll0ctrl0,
			CLKCTRL_PLL0CTRL0_POWER);
	early_delay(100);

	/*
	 * TODO: Should the PLL0 FORCE_LOCK bit be set here followed be a
	 * wait on the PLL0 LOCK bit?
	 */
	setbits_le32(&clkctrl_regs->hw_clkctrl_clkseq,
			CLKCTRL_CLKSEQ_BYPASS_CPU);
}

/**
 * mxs_power_set_auto_restart() - Set the auto-restart bit
 *
 * This function ungates the RTC block and sets the AUTO_RESTART
 * bit to work around a design bug on MX28EVK Rev. A .
 */

static void mxs_power_set_auto_restart(void)
{
	struct mxs_rtc_regs *rtc_regs =
		(struct mxs_rtc_regs *)MXS_RTC_BASE;

	debug("SPL: Setting auto-restart bit\n");

	writel(RTC_CTRL_SFTRST, &rtc_regs->hw_rtc_ctrl_clr);
	while (readl(&rtc_regs->hw_rtc_ctrl) & RTC_CTRL_SFTRST)
		;

	writel(RTC_CTRL_CLKGATE, &rtc_regs->hw_rtc_ctrl_clr);
	while (readl(&rtc_regs->hw_rtc_ctrl) & RTC_CTRL_CLKGATE)
		;

	/* Do nothing if flag already set */
	if (readl(&rtc_regs->hw_rtc_persistent0) & RTC_PERSISTENT0_AUTO_RESTART)
		return;

	while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_NEW_REGS_MASK)
		;

	setbits_le32(&rtc_regs->hw_rtc_persistent0,
			RTC_PERSISTENT0_AUTO_RESTART);
	writel(RTC_CTRL_FORCE_UPDATE, &rtc_regs->hw_rtc_ctrl_set);
	writel(RTC_CTRL_FORCE_UPDATE, &rtc_regs->hw_rtc_ctrl_clr);
	while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_NEW_REGS_MASK)
		;
	while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_STALE_REGS_MASK)
		;
}

/**
 * mxs_power_set_linreg() - Set linear regulators 25mV below DC-DC converter
 *
 * This function configures the VDDIO, VDDA and VDDD linear regulators output
 * to be 25mV below the VDDIO, VDDA and VDDD output from the DC-DC switching
 * converter. This is the recommended setting for the case where we use both
 * linear regulators and DC-DC converter to power the VDDIO rail.
 */
static void mxs_power_set_linreg(void)
{
	struct mxs_power_regs *power_regs =
		(struct mxs_power_regs *)MXS_POWER_BASE;

	/* Set linear regulator 25mV below switching converter */
	debug("SPL: Setting VDDD 25mV below DC-DC converters\n");
	clrsetbits_le32(&power_regs->hw_power_vdddctrl,
			POWER_VDDDCTRL_LINREG_OFFSET_MASK,
			POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW);

	debug("SPL: Setting VDDA 25mV below DC-DC converters\n");
	clrsetbits_le32(&power_regs->hw_power_vddactrl,
			POWER_VDDACTRL_LINREG_OFFSET_MASK,
			POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW);

	debug("SPL: Setting VDDIO 25mV below DC-DC converters\n");
	clrsetbits_le32(&power_regs->hw_power_vddioctrl,
			POWER_VDDIOCTRL_LINREG_OFFSET_MASK,
			POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW);
}

/**
 * mxs_get_batt_volt() - Measure battery input voltage
 *
 * This function retrieves the battery input voltage and returns it.
 */
static int mxs_get_batt_volt(void)
{
	struct mxs_power_regs *power_regs =
		(struct mxs_power_regs *)MXS_POWER_BASE;
	uint32_t volt = readl(&power_regs->hw_power_battmonitor);
	volt &= POWER_BATTMONITOR_BATT_VAL_MASK;
	volt >>= POWER_BATTMONITOR_BATT_VAL_OFFSET;
	volt *= 8;

	debug("SPL: Battery Voltage = %dmV\n", volt);
	return volt;
}

/**
 * mxs_is_batt_ready() - Test if the battery provides enough voltage to boot
 *
 * This function checks if the battery input voltage is higher than 3.6V and
 * therefore allows the system to successfully boot using this power source.
 */
static int mxs_is_batt_ready(void)
{
	return (mxs_get_batt_volt() >= 3600);
}

/**
 * mxs_is_batt_good() - Test if battery is operational at all
 *
 * This function starts recharging the battery and tests if the input current
 * provided by the 5V input recharging the battery is also sufficient to power
 * the DC-DC converter.
 */
static int mxs_is_batt_good(void)
{
	struct mxs_power_regs *power_regs =
		(struct mxs_power_regs *)MXS_POWER_BASE;
	uint32_t volt = mxs_get_batt_volt();

	if ((volt >= 2400) && (volt <= 4300)) {
		debug("SPL: Battery is good\n");
		return 1;
	}

	clrsetbits_le32(&power_regs->hw_power_5vctrl,
		POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
		0x3 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
	writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
		&power_regs->hw_power_5vctrl_clr);

	clrsetbits_le32(&power_regs->hw_power_charge,
		POWER_CHARGE_STOP_ILIMIT_MASK | POWER_CHARGE_BATTCHRG_I_MASK,
		POWER_CHARGE_STOP_ILIMIT_10MA | 0x3);

	writel(POWER_CHARGE_PWD_BATTCHRG, &power_regs->hw_power_charge_clr);
	writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
		&power_regs->hw_power_5vctrl_clr);

	early_delay(500000);

	volt = mxs_get_batt_volt();

	if (volt >= 3500) {
		debug("SPL: Battery Voltage too high\n");
		return 0;
	}

	if (volt >= 2400) {
		debug("SPL: Battery is good\n");
		return 1;
	}

	writel(POWER_CHARGE_STOP_ILIMIT_MASK | POWER_CHARGE_BATTCHRG_I_MASK,
		&power_regs->hw_power_charge_clr);
	writel(POWER_CHARGE_PWD_BATTCHRG, &power_regs->hw_power_charge_set);

	debug("SPL: Battery Voltage too low\n");
	return 0;
}

/**
 * mxs_power_setup_5v_detect() - Start the 5V input detection comparator
 *
 * This function enables the 5V detection comparator and sets the 5V valid
 * threshold to 4.4V . We use 4.4V threshold here to make sure that even
 * under high load, the voltage drop on the 5V input won't be so critical
 * to cause undervolt on the 4P2 linear regulator supplying the DC-DC
 * converter and thus making the system crash.
 */
static void mxs_power_setup_5v_detect(void)
{
	struct mxs_power_regs *power_regs =
		(struct mxs_power_regs *)MXS_POWER_BASE;

	/* Start 5V detection */
	debug("SPL: Starting 5V input detection comparator\n");
	clrsetbits_le32(&power_regs->hw_power_5vctrl,
			POWER_5VCTRL_VBUSVALID_TRSH_MASK,
			POWER_5VCTRL_VBUSVALID_TRSH_4V4 |
			POWER_5VCTRL_PWRUP_VBUS_CMPS);
}

/**
 * mxs_src_power_init() - Preconfigure the power block
 *
 * This function configures reasonable values for the DC-DC control loop
 * and battery monitor.
 */
static void mxs_src_power_init(void)
{
	struct mxs_power_regs *power_regs =
		(struct mxs_power_regs *)MXS_POWER_BASE;

	debug("SPL: Pre-Configuring power block\n");

	/* Improve efficieny and reduce transient ripple */
	writel(POWER_LOOPCTRL_TOGGLE_DIF | POWER_LOOPCTRL_EN_CM_HYST |
		POWER_LOOPCTRL_EN_DF_HYST, &power_regs->hw_power_loopctrl_set);

	clrsetbits_le32(&power_regs->hw_power_dclimits,
			POWER_DCLIMITS_POSLIMIT_BUCK_MASK,
			0x30 << POWER_DCLIMITS_POSLIMIT_BUCK_OFFSET);

	setbits_le32(&power_regs->hw_power_battmonitor,
			POWER_BATTMONITOR_EN_BATADJ);

	/* Increase the RCSCALE level for quick DCDC response to dynamic load */
	clrsetbits_le32(&power_regs->hw_power_loopctrl,
			POWER_LOOPCTRL_EN_RCSCALE_MASK,
			POWER_LOOPCTRL_RCSCALE_THRESH |
			POWER_LOOPCTRL_EN_RCSCALE_8X);

	clrsetbits_le32(&power_regs->hw_power_minpwr,
			POWER_MINPWR_HALFFETS, POWER_MINPWR_DOUBLE_FETS);

	/* 5V to battery handoff ... FIXME */
	setbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
	early_delay(30);
	clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
}

/**
 * mxs_power_init_4p2_params() - Configure the parameters of the 4P2 regulator
 *
 * This function configures the necessary parameters for the 4P2 linear
 * regulator to supply the DC-DC converter from 5V input.
 */
static void mxs_power_init_4p2_params(void)
{
	struct mxs_power_regs *power_regs =
		(struct mxs_power_regs *)MXS_POWER_BASE;

	debug("SPL: Configuring common 4P2 regulator params\n");

	/* Setup 4P2 parameters */
	clrsetbits_le32(&power_regs->hw_power_dcdc4p2,
		POWER_DCDC4P2_CMPTRIP_MASK | POWER_DCDC4P2_TRG_MASK,
		POWER_DCDC4P2_TRG_4V2 | (31 << POWER_DCDC4P2_CMPTRIP_OFFSET));

	clrsetbits_le32(&power_regs->hw_power_5vctrl,
		POWER_5VCTRL_HEADROOM_ADJ_MASK,
		0x4 << POWER_5VCTRL_HEADROOM_ADJ_OFFSET);

	clrsetbits_le32(&power_regs->hw_power_dcdc4p2,
		POWER_DCDC4P2_DROPOUT_CTRL_MASK,
		DCDC4P2_DROPOUT_CONFIG);

	clrsetbits_le32(&power_regs->hw_power_5vctrl,
		POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
		0x3f << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
}

/**
 * mxs_enable_4p2_dcdc_input() - Enable or disable the DCDC input from 4P2
 * @xfer:	Select if the input shall be enabled or disabled
 *
 * This function enables or disables the 4P2 input into the DC-DC converter.
 */
static void mxs_enable_4p2_dcdc_input(int xfer)
{
	struct mxs_power_regs *power_regs =
		(struct mxs_power_regs *)MXS_POWER_BASE;
	uint32_t tmp, vbus_thresh, vbus_5vdetect, pwd_bo;
	uint32_t prev_5v_brnout, prev_5v_droop;

	debug("SPL: %s 4P2 DC-DC Input\n", xfer ? "Enabling" : "Disabling");

	prev_5v_brnout = readl(&power_regs->hw_power_5vctrl) &
				POWER_5VCTRL_PWDN_5VBRNOUT;
	prev_5v_droop = readl(&power_regs->hw_power_ctrl) &
				POWER_CTRL_ENIRQ_VDD5V_DROOP;

	clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_PWDN_5VBRNOUT);
	writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF,
		&power_regs->hw_power_reset);

	clrbits_le32(&power_regs->hw_power_ctrl, POWER_CTRL_ENIRQ_VDD5V_DROOP);

	if (xfer && (readl(&power_regs->hw_power_5vctrl) &
			POWER_5VCTRL_ENABLE_DCDC)) {
		return;
	}

	/*
	 * Recording orignal values that will be modified temporarlily
	 * to handle a chip bug. See chip errata for CQ ENGR00115837
	 */
	tmp = readl(&power_regs->hw_power_5vctrl);
	vbus_thresh = tmp & POWER_5VCTRL_VBUSVALID_TRSH_MASK;
	vbus_5vdetect = tmp & POWER_5VCTRL_VBUSVALID_5VDETECT;

	pwd_bo = readl(&power_regs->hw_power_minpwr) & POWER_MINPWR_PWD_BO;

	/*
	 * Disable mechanisms that get erroneously tripped by when setting
	 * the DCDC4P2 EN_DCDC
	 */
	clrbits_le32(&power_regs->hw_power_5vctrl,
		POWER_5VCTRL_VBUSVALID_5VDETECT |
		POWER_5VCTRL_VBUSVALID_TRSH_MASK);

	writel(POWER_MINPWR_PWD_BO, &power_regs->hw_power_minpwr_set);

	if (xfer) {
		setbits_le32(&power_regs->hw_power_5vctrl,
				POWER_5VCTRL_DCDC_XFER);
		early_delay(20);
		clrbits_le32(&power_regs->hw_power_5vctrl,
				POWER_5VCTRL_DCDC_XFER);

		setbits_le32(&power_regs->hw_power_5vctrl,
				POWER_5VCTRL_ENABLE_DCDC);
	} else {
		setbits_le32(&power_regs->hw_power_dcdc4p2,
				POWER_DCDC4P2_ENABLE_DCDC);
	}

	early_delay(25);

	clrsetbits_le32(&power_regs->hw_power_5vctrl,
			POWER_5VCTRL_VBUSVALID_TRSH_MASK, vbus_thresh);

	if (vbus_5vdetect)
		writel(vbus_5vdetect, &power_regs->hw_power_5vctrl_set);

	if (!pwd_bo)
		clrbits_le32(&power_regs->hw_power_minpwr, POWER_MINPWR_PWD_BO);

	while (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ)
		writel(POWER_CTRL_VBUS_VALID_IRQ,
			&power_regs->hw_power_ctrl_clr);

	if (prev_5v_brnout) {
		writel(POWER_5VCTRL_PWDN_5VBRNOUT,
			&power_regs->hw_power_5vctrl_set);
		writel(POWER_RESET_UNLOCK_KEY,
			&power_regs->hw_power_reset);
	} else {
		writel(POWER_5VCTRL_PWDN_5VBRNOUT,
			&power_regs->hw_power_5vctrl_clr);
		writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF,
			&power_regs->hw_power_reset);
	}

	while (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VDD5V_DROOP_IRQ)
		writel(POWER_CTRL_VDD5V_DROOP_IRQ,
			&power_regs->hw_power_ctrl_clr);

	if (prev_5v_droop)
		clrbits_le32(&power_regs->hw_power_ctrl,
				POWER_CTRL_ENIRQ_VDD5V_DROOP);
	else
		setbits_le32(&power_regs->hw_power_ctrl,
				POWER_CTRL_ENIRQ_VDD5V_DROOP);
}

/**
 * mxs_power_init_4p2_regulator() - Start the 4P2 regulator
 *
 * This function enables the 4P2 regulator and switches the DC-DC converter
 * to use the 4P2 input.
 */
static void mxs_power_init_4p2_regulator(void)
{
	struct mxs_power_regs *power_regs =
		(struct mxs_power_regs *)MXS_POWER_BASE;
	uint32_t tmp, tmp2;

	debug("SPL: Enabling 4P2 regulator\n");

	setbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_ENABLE_4P2);

	writel(POWER_CHARGE_ENABLE_LOAD, &power_regs->hw_power_charge_set);

	writel(POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
		&power_regs->hw_power_5vctrl_clr);
	clrbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_TRG_MASK);

	/* Power up the 4p2 rail and logic/control */
	writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
		&power_regs->hw_power_5vctrl_clr);

	/*
	 * Start charging up the 4p2 capacitor. We ramp of this charge
	 * gradually to avoid large inrush current from the 5V cable which can
	 * cause transients/problems
	 */
	debug("SPL: Charging 4P2 capacitor\n");
	mxs_enable_4p2_dcdc_input(0);

	if (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) {
		/*
		 * If we arrived here, we were unable to recover from mx23 chip
		 * errata 5837. 4P2 is disabled and sufficient battery power is
		 * not present. Exiting to not enable DCDC power during 5V
		 * connected state.
		 */
		clrbits_le32(&power_regs->hw_power_dcdc4p2,
			POWER_DCDC4P2_ENABLE_DCDC);
		writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
			&power_regs->hw_power_5vctrl_set);

		debug("SPL: Unable to recover from mx23 errata 5837\n");
		hang();
	}

	/*
	 * Here we set the 4p2 brownout level to something very close to 4.2V.
	 * We then check the brownout status. If the brownout status is false,
	 * the voltage is already close to the target voltage of 4.2V so we
	 * can go ahead and set the 4P2 current limit to our max target limit.
	 * If the brownout status is true, we need to ramp us the current limit
	 * so that we don't cause large inrush current issues. We step up the
	 * current limit until the brownout status is false or until we've
	 * reached our maximum defined 4p2 current limit.
	 */
	debug("SPL: Setting 4P2 brownout level\n");
	clrsetbits_le32(&power_regs->hw_power_dcdc4p2,
			POWER_DCDC4P2_BO_MASK,
			22 << POWER_DCDC4P2_BO_OFFSET);	/* 4.15V */

	if (!(readl(&power_regs->hw_power_sts) & POWER_STS_DCDC_4P2_BO)) {
		setbits_le32(&power_regs->hw_power_5vctrl,
			0x3f << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
	} else {
		tmp = (readl(&power_regs->hw_power_5vctrl) &
			POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK) >>
			POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET;
		while (tmp < 0x3f) {
			if (!(readl(&power_regs->hw_power_sts) &
					POWER_STS_DCDC_4P2_BO)) {
				tmp = readl(&power_regs->hw_power_5vctrl);
				tmp |= POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK;
				early_delay(100);
				writel(tmp, &power_regs->hw_power_5vctrl);
				break;
			} else {
				tmp++;
				tmp2 = readl(&power_regs->hw_power_5vctrl);
				tmp2 &= ~POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK;
				tmp2 |= tmp <<
					POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET;
				writel(tmp2, &power_regs->hw_power_5vctrl);
				early_delay(100);
			}
		}
	}

	clrbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_BO_MASK);
	writel(POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr);
}

/**
 * mxs_power_init_dcdc_4p2_source() - Switch DC-DC converter to 4P2 source
 *
 * This function configures the DC-DC converter to be supplied from the 4P2
 * linear regulator.
 */
static void mxs_power_init_dcdc_4p2_source(void)
{
	struct mxs_power_regs *power_regs =
		(struct mxs_power_regs *)MXS_POWER_BASE;

	debug("SPL: Switching DC-DC converters to 4P2\n");

	if (!(readl(&power_regs->hw_power_dcdc4p2) &
		POWER_DCDC4P2_ENABLE_DCDC)) {
		debug("SPL: Already switched - aborting\n");
		hang();
	}

	mxs_enable_4p2_dcdc_input(1);

	if (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) {
		clrbits_le32(&power_regs->hw_power_dcdc4p2,
			POWER_DCDC4P2_ENABLE_DCDC);
		writel(POWER_5VCTRL_ENABLE_DCDC,
			&power_regs->hw_power_5vctrl_clr);
		writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
			&power_regs->hw_power_5vctrl_set);
	}
}

/**
 * mxs_power_enable_4p2() - Power up the 4P2 regulator
 *
 * This function drives the process of powering up the 4P2 linear regulator
 * and switching the DC-DC converter input over to the 4P2 linear regulator.
 */
static void mxs_power_enable_4p2(void)
{
	struct mxs_power_regs *power_regs =
		(struct mxs_power_regs *)MXS_POWER_BASE;
	uint32_t vdddctrl, vddactrl, vddioctrl;
	uint32_t tmp;

	debug("SPL: Powering up 4P2 regulator\n");

	vdddctrl = readl(&power_regs->hw_power_vdddctrl);
	vddactrl = readl(&power_regs->hw_power_vddactrl);
	vddioctrl = readl(&power_regs->hw_power_vddioctrl);

	setbits_le32(&power_regs->hw_power_vdddctrl,
		POWER_VDDDCTRL_DISABLE_FET | POWER_VDDDCTRL_ENABLE_LINREG |
		POWER_VDDDCTRL_PWDN_BRNOUT);

	setbits_le32(&power_regs->hw_power_vddactrl,
		POWER_VDDACTRL_DISABLE_FET | POWER_VDDACTRL_ENABLE_LINREG |
		POWER_VDDACTRL_PWDN_BRNOUT);

	setbits_le32(&power_regs->hw_power_vddioctrl,
		POWER_VDDIOCTRL_DISABLE_FET | POWER_VDDIOCTRL_PWDN_BRNOUT);

	mxs_power_init_4p2_params();
	mxs_power_init_4p2_regulator();

	/* Shutdown battery (none present) */
	if (!mxs_is_batt_ready()) {
		clrbits_le32(&power_regs->hw_power_dcdc4p2,
				POWER_DCDC4P2_BO_MASK);
		writel(POWER_CTRL_DCDC4P2_BO_IRQ,
				&power_regs->hw_power_ctrl_clr);
		writel(POWER_CTRL_ENIRQ_DCDC4P2_BO,
				&power_regs->hw_power_ctrl_clr);
	}

	mxs_power_init_dcdc_4p2_source();

	writel(vdddctrl, &power_regs->hw_power_vdddctrl);
	early_delay(20);
	writel(vddactrl, &power_regs->hw_power_vddactrl);
	early_delay(20);
	writel(vddioctrl, &power_regs->hw_power_vddioctrl);

	/*
	 * Check if FET is enabled on either powerout and if so,
	 * disable load.
	 */
	tmp = 0;
	tmp |= !(readl(&power_regs->hw_power_vdddctrl) &
			POWER_VDDDCTRL_DISABLE_FET);
	tmp |= !(readl(&power_regs->hw_power_vddactrl) &
			POWER_VDDACTRL_DISABLE_FET);
	tmp |= !(readl(&power_regs->hw_power_vddioctrl) &
			POWER_VDDIOCTRL_DISABLE_FET);
	if (tmp)
		writel(POWER_CHARGE_ENABLE_LOAD,
			&power_regs->hw_power_charge_clr);

	debug("SPL: 4P2 regulator powered-up\n");
}

/**
 * mxs_boot_valid_5v() - Boot from 5V supply
 *
 * This function configures the power block to boot from valid 5V input.
 * This is called only if the 5V is reliable and can properly supply the
 * CPU. This function proceeds to configure the 4P2 converter to be supplied
 * from the 5V input.
 */
static void mxs_boot_valid_5v(void)
{
	struct mxs_power_regs *power_regs =
		(struct mxs_power_regs *)MXS_POWER_BASE;

	debug("SPL: Booting from 5V supply\n");

	/*
	 * Use VBUSVALID level instead of VDD5V_GT_VDDIO level to trigger a 5V
	 * disconnect event. FIXME
	 */
	writel(POWER_5VCTRL_VBUSVALID_5VDETECT,
		&power_regs->hw_power_5vctrl_set);

	/* Configure polarity to check for 5V disconnection. */
	writel(POWER_CTRL_POLARITY_VBUSVALID |
		POWER_CTRL_POLARITY_VDD5V_GT_VDDIO,
		&power_regs->hw_power_ctrl_clr);

	writel(POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_VDD5V_GT_VDDIO_IRQ,
		&power_regs->hw_power_ctrl_clr);

	mxs_power_enable_4p2();
}

/**
 * mxs_powerdown() - Shut down the system
 *
 * This function powers down the CPU completely.
 */
static void mxs_powerdown(void)
{
	struct mxs_power_regs *power_regs =
		(struct mxs_power_regs *)MXS_POWER_BASE;

	debug("Powering Down\n");

	writel(POWER_RESET_UNLOCK_KEY, &power_regs->hw_power_reset);
	writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF,
		&power_regs->hw_power_reset);
}

/**
 * mxs_batt_boot() - Configure the power block to boot from battery input
 *
 * This function configures the power block to boot from the battery voltage
 * supply.
 */
static void mxs_batt_boot(void)
{
	struct mxs_power_regs *power_regs =
		(struct mxs_power_regs *)MXS_POWER_BASE;

	debug("SPL: Configuring power block to boot from battery\n");

	clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_PWDN_5VBRNOUT);
	clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_ENABLE_DCDC);

	clrbits_le32(&power_regs->hw_power_dcdc4p2,
			POWER_DCDC4P2_ENABLE_DCDC | POWER_DCDC4P2_ENABLE_4P2);
	writel(POWER_CHARGE_ENABLE_LOAD, &power_regs->hw_power_charge_clr);

	/* 5V to battery handoff. */
	setbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
	early_delay(30);
	clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);

	writel(POWER_CTRL_ENIRQ_DCDC4P2_BO, &power_regs->hw_power_ctrl_clr);

	clrsetbits_le32(&power_regs->hw_power_minpwr,
			POWER_MINPWR_HALFFETS, POWER_MINPWR_DOUBLE_FETS);

	mxs_power_set_linreg();

	clrbits_le32(&power_regs->hw_power_vdddctrl,
		POWER_VDDDCTRL_DISABLE_FET | POWER_VDDDCTRL_ENABLE_LINREG);

	clrbits_le32(&power_regs->hw_power_vddactrl,
		POWER_VDDACTRL_DISABLE_FET | POWER_VDDACTRL_ENABLE_LINREG);

	clrbits_le32(&power_regs->hw_power_vddioctrl,
		POWER_VDDIOCTRL_DISABLE_FET);

	setbits_le32(&power_regs->hw_power_5vctrl,
		POWER_5VCTRL_PWD_CHARGE_4P2_MASK);

	setbits_le32(&power_regs->hw_power_5vctrl,
		POWER_5VCTRL_ENABLE_DCDC);

	clrsetbits_le32(&power_regs->hw_power_5vctrl,
		POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
		0x8 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);

	mxs_power_enable_4p2();
}

/**
 * mxs_handle_5v_conflict() - Test if the 5V input is reliable
 *
 * This function tests if the 5V input can reliably supply the system. If it
 * can, then proceed to configuring the system to boot from 5V source, otherwise
 * try booting from battery supply. If we can not boot from battery supply
 * either, shut down the system.
 */
static void mxs_handle_5v_conflict(void)
{
	struct mxs_power_regs *power_regs =
		(struct mxs_power_regs *)MXS_POWER_BASE;
	uint32_t tmp;

	debug("SPL: Resolving 5V conflict\n");

	setbits_le32(&power_regs->hw_power_vddioctrl,
			POWER_VDDIOCTRL_BO_OFFSET_MASK);

	for (;;) {
		tmp = readl(&power_regs->hw_power_sts);

		if (tmp & POWER_STS_VDDIO_BO) {
			/*
			 * VDDIO has a brownout, then the VDD5V_GT_VDDIO becomes
			 * unreliable
			 */
			debug("SPL: VDDIO has a brownout\n");
			mxs_powerdown();
			break;
		}

		if (tmp & POWER_STS_VDD5V_GT_VDDIO) {
			debug("SPL: POWER_STS_VDD5V_GT_VDDIO is set\n");
			mxs_boot_valid_5v();
			break;
		} else {
			debug("SPL: POWER_STS_VDD5V_GT_VDDIO is not set\n");
			mxs_powerdown();
			break;
		}

		/*
		 * TODO: I can't see this being reached. We'll either
		 * powerdown or boot from a stable 5V supply.
		 */
		if (tmp & POWER_STS_PSWITCH_MASK) {
			debug("SPL: POWER_STS_PSWITCH_MASK is set\n");
			mxs_batt_boot();
			break;
		}
	}
}

/**
 * mxs_5v_boot() - Configure the power block to boot from 5V input
 *
 * This function handles configuration of the power block when supplied by
 * a 5V input.
 */
static void mxs_5v_boot(void)
{
	struct mxs_power_regs *power_regs =
		(struct mxs_power_regs *)MXS_POWER_BASE;

	debug("SPL: Configuring power block to boot from 5V input\n");

	/*
	 * NOTE: In original IMX-Bootlets, this also checks for VBUSVALID,
	 * but their implementation always returns 1 so we omit it here.
	 */
	if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
		debug("SPL: 5V VDD good\n");
		mxs_boot_valid_5v();
		return;
	}

	early_delay(1000);
	if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
		debug("SPL: 5V VDD good (after delay)\n");
		mxs_boot_valid_5v();
		return;
	}

	debug("SPL: 5V VDD not good\n");
	mxs_handle_5v_conflict();
}

/**
 * mxs_init_batt_bo() - Configure battery brownout threshold
 *
 * This function configures the battery input brownout threshold. The value
 * at which the battery brownout happens is configured to 3.0V in the code.
 */
static void mxs_init_batt_bo(void)
{
	struct mxs_power_regs *power_regs =
		(struct mxs_power_regs *)MXS_POWER_BASE;

	debug("SPL: Initialising battery brown-out level to 3.0V\n");

	/* Brownout at 3V */
	clrsetbits_le32(&power_regs->hw_power_battmonitor,
		POWER_BATTMONITOR_BRWNOUT_LVL_MASK,
		15 << POWER_BATTMONITOR_BRWNOUT_LVL_OFFSET);

	writel(POWER_CTRL_BATT_BO_IRQ, &power_regs->hw_power_ctrl_clr);
	writel(POWER_CTRL_ENIRQ_BATT_BO, &power_regs->hw_power_ctrl_clr);
}

/**
 * mxs_switch_vddd_to_dcdc_source() - Switch VDDD rail to DC-DC converter
 *
 * This function turns off the VDDD linear regulator and therefore makes
 * the VDDD rail be supplied only by the DC-DC converter.
 */
static void mxs_switch_vddd_to_dcdc_source(void)
{
	struct mxs_power_regs *power_regs =
		(struct mxs_power_regs *)MXS_POWER_BASE;

	debug("SPL: Switching VDDD to DC-DC converters\n");

	clrsetbits_le32(&power_regs->hw_power_vdddctrl,
		POWER_VDDDCTRL_LINREG_OFFSET_MASK,
		POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW);

	clrbits_le32(&power_regs->hw_power_vdddctrl,
		POWER_VDDDCTRL_DISABLE_FET | POWER_VDDDCTRL_ENABLE_LINREG |
		POWER_VDDDCTRL_DISABLE_STEPPING);
}

/**
 * mxs_power_configure_power_source() - Configure power block source
 *
 * This function is the core of the power configuration logic. The function
 * selects the power block input source and configures the whole power block
 * accordingly. After the configuration is complete and the system is stable
 * again, the function switches the CPU clock source back to PLL. Finally,
 * the function switches the voltage rails to DC-DC converter.
 */
static void mxs_power_configure_power_source(void)
{
	int batt_ready, batt_good;
	struct mxs_power_regs *power_regs =
		(struct mxs_power_regs *)MXS_POWER_BASE;
	struct mxs_lradc_regs *lradc_regs =
		(struct mxs_lradc_regs *)MXS_LRADC_BASE;

	debug("SPL: Configuring power source\n");

	mxs_src_power_init();

	if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
		batt_ready = mxs_is_batt_ready();
		if (batt_ready) {
			/* 5V source detected, good battery detected. */
			mxs_batt_boot();
		} else {
			batt_good = mxs_is_batt_good();
			if (!batt_good) {
				/* 5V source detected, bad battery detected. */
				writel(LRADC_CONVERSION_AUTOMATIC,
					&lradc_regs->hw_lradc_conversion_clr);
				clrbits_le32(&power_regs->hw_power_battmonitor,
					POWER_BATTMONITOR_BATT_VAL_MASK);
			}
			mxs_5v_boot();
		}
	} else {
		/* 5V not detected, booting from battery. */
		mxs_batt_boot();
	}

	/*
	 * TODO: Do not switch CPU clock to PLL if we are VDD5V is sourced
	 * from USB VBUS
	 */
	mxs_power_clock2pll();

	mxs_init_batt_bo();

	mxs_switch_vddd_to_dcdc_source();

#ifdef CONFIG_MX23
	/* Fire up the VDDMEM LinReg now that we're all set. */
	debug("SPL: Enabling mx23 VDDMEM linear regulator\n");
	writel(POWER_VDDMEMCTRL_ENABLE_LINREG | POWER_VDDMEMCTRL_ENABLE_ILIMIT,
		&power_regs->hw_power_vddmemctrl);
#endif
}

/**
 * mxs_enable_output_rail_protection() - Enable power rail protection
 *
 * This function enables overload protection on the power rails. This is
 * triggered if the power rails' voltage drops rapidly due to overload and
 * in such case, the supply to the powerrail is cut-off, protecting the
 * CPU from damage. Note that under such condition, the system will likely
 * crash or misbehave.
 */
static void mxs_enable_output_rail_protection(void)
{
	struct mxs_power_regs *power_regs =
		(struct mxs_power_regs *)MXS_POWER_BASE;

	debug("SPL: Enabling output rail protection\n");

	writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ |
		POWER_CTRL_VDDIO_BO_IRQ, &power_regs->hw_power_ctrl_clr);

	setbits_le32(&power_regs->hw_power_vdddctrl,
			POWER_VDDDCTRL_PWDN_BRNOUT);

	setbits_le32(&power_regs->hw_power_vddactrl,
			POWER_VDDACTRL_PWDN_BRNOUT);

	setbits_le32(&power_regs->hw_power_vddioctrl,
			POWER_VDDIOCTRL_PWDN_BRNOUT);
}

/**
 * mxs_get_vddio_power_source_off() - Get VDDIO rail power source
 *
 * This function tests if the VDDIO rail is supplied by linear regulator
 * or by the DC-DC converter. Returns 1 if powered by linear regulator,
 * returns 0 if powered by the DC-DC converter.
 */
static int mxs_get_vddio_power_source_off(void)
{
	struct mxs_power_regs *power_regs =
		(struct mxs_power_regs *)MXS_POWER_BASE;
	uint32_t tmp;

	if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
		tmp = readl(&power_regs->hw_power_vddioctrl);
		if (tmp & POWER_VDDIOCTRL_DISABLE_FET) {
			if ((tmp & POWER_VDDIOCTRL_LINREG_OFFSET_MASK) ==
				POWER_VDDIOCTRL_LINREG_OFFSET_0STEPS) {
				return 1;
			}
		}

		if (!(readl(&power_regs->hw_power_5vctrl) &
			POWER_5VCTRL_ENABLE_DCDC)) {
			if ((tmp & POWER_VDDIOCTRL_LINREG_OFFSET_MASK) ==
				POWER_VDDIOCTRL_LINREG_OFFSET_0STEPS) {
				return 1;
			}
		}
	}

	return 0;

}

/**
 * mxs_get_vddd_power_source_off() - Get VDDD rail power source
 *
 * This function tests if the VDDD rail is supplied by linear regulator
 * or by the DC-DC converter. Returns 1 if powered by linear regulator,
 * returns 0 if powered by the DC-DC converter.
 */
static int mxs_get_vddd_power_source_off(void)
{
	struct mxs_power_regs *power_regs =
		(struct mxs_power_regs *)MXS_POWER_BASE;
	uint32_t tmp;

	tmp = readl(&power_regs->hw_power_vdddctrl);
	if (tmp & POWER_VDDDCTRL_DISABLE_FET) {
		if ((tmp & POWER_VDDDCTRL_LINREG_OFFSET_MASK) ==
			POWER_VDDDCTRL_LINREG_OFFSET_0STEPS) {
			return 1;
		}
	}

	if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
		if (!(readl(&power_regs->hw_power_5vctrl) &
			POWER_5VCTRL_ENABLE_DCDC)) {
			return 1;
		}
	}

	if (!(tmp & POWER_VDDDCTRL_ENABLE_LINREG)) {
		if ((tmp & POWER_VDDDCTRL_LINREG_OFFSET_MASK) ==
			POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW) {
			return 1;
		}
	}

	return 0;
}

struct mxs_vddx_cfg {
	uint32_t		*reg;
	uint8_t			step_mV;
	uint16_t		lowest_mV;
	int			(*powered_by_linreg)(void);
	uint32_t		trg_mask;
	uint32_t		bo_irq;
	uint32_t		bo_enirq;
	uint32_t		bo_offset_mask;
	uint32_t		bo_offset_offset;
};

static const struct mxs_vddx_cfg mxs_vddio_cfg = {
	.reg			= &(((struct mxs_power_regs *)MXS_POWER_BASE)->
					hw_power_vddioctrl),
#if defined(CONFIG_MX23)
	.step_mV		= 25,
#else
	.step_mV		= 50,
#endif
	.lowest_mV		= 2800,
	.powered_by_linreg	= mxs_get_vddio_power_source_off,
	.trg_mask		= POWER_VDDIOCTRL_TRG_MASK,
	.bo_irq			= POWER_CTRL_VDDIO_BO_IRQ,
	.bo_enirq		= POWER_CTRL_ENIRQ_VDDIO_BO,
	.bo_offset_mask		= POWER_VDDIOCTRL_BO_OFFSET_MASK,
	.bo_offset_offset	= POWER_VDDIOCTRL_BO_OFFSET_OFFSET,
};

static const struct mxs_vddx_cfg mxs_vddd_cfg = {
	.reg			= &(((struct mxs_power_regs *)MXS_POWER_BASE)->
					hw_power_vdddctrl),
	.step_mV		= 25,
	.lowest_mV		= 800,
	.powered_by_linreg	= mxs_get_vddd_power_source_off,
	.trg_mask		= POWER_VDDDCTRL_TRG_MASK,
	.bo_irq			= POWER_CTRL_VDDD_BO_IRQ,
	.bo_enirq		= POWER_CTRL_ENIRQ_VDDD_BO,
	.bo_offset_mask		= POWER_VDDDCTRL_BO_OFFSET_MASK,
	.bo_offset_offset	= POWER_VDDDCTRL_BO_OFFSET_OFFSET,
};

#ifdef CONFIG_MX23
static const struct mxs_vddx_cfg mxs_vddmem_cfg = {
	.reg			= &(((struct mxs_power_regs *)MXS_POWER_BASE)->
					hw_power_vddmemctrl),
	.step_mV		= 50,
	.lowest_mV		= 1700,
	.powered_by_linreg	= NULL,
	.trg_mask		= POWER_VDDMEMCTRL_TRG_MASK,
	.bo_irq			= 0,
	.bo_enirq		= 0,
	.bo_offset_mask		= 0,
	.bo_offset_offset	= 0,
};
#endif

/**
 * mxs_power_set_vddx() - Configure voltage on DC-DC converter rail
 * @cfg:		Configuration data of the DC-DC converter rail
 * @new_target:		New target voltage of the DC-DC converter rail
 * @new_brownout:	New brownout trigger voltage
 *
 * This function configures the output voltage on the DC-DC converter rail.
 * The rail is selected by the @cfg argument. The new voltage target is
 * selected by the @new_target and the voltage is specified in mV. The
 * new brownout value is selected by the @new_brownout argument and the
 * value is also in mV.
 */
static void mxs_power_set_vddx(const struct mxs_vddx_cfg *cfg,
				uint32_t new_target, uint32_t new_brownout)
{
	struct mxs_power_regs *power_regs =
		(struct mxs_power_regs *)MXS_POWER_BASE;
	uint32_t cur_target, diff, bo_int = 0;
	uint32_t powered_by_linreg = 0;
	int adjust_up, tmp;

	new_brownout = DIV_ROUND_CLOSEST(new_target - new_brownout,
					 cfg->step_mV);

	cur_target = readl(cfg->reg);
	cur_target &= cfg->trg_mask;
	cur_target *= cfg->step_mV;
	cur_target += cfg->lowest_mV;

	adjust_up = new_target > cur_target;
	if (cfg->powered_by_linreg)
		powered_by_linreg = cfg->powered_by_linreg();

	if (adjust_up && cfg->bo_irq) {
		if (powered_by_linreg) {
			bo_int = readl(cfg->reg);
			clrbits_le32(cfg->reg, cfg->bo_enirq);
		}
		setbits_le32(cfg->reg, cfg->bo_offset_mask);
	}

	do {
		if (abs(new_target - cur_target) > 100) {
			if (adjust_up)
				diff = cur_target + 100;
			else
				diff = cur_target - 100;
		} else {
			diff = new_target;
		}

		diff -= cfg->lowest_mV;
		diff /= cfg->step_mV;

		clrsetbits_le32(cfg->reg, cfg->trg_mask, diff);

		if (powered_by_linreg ||
			(readl(&power_regs->hw_power_sts) &
				POWER_STS_VDD5V_GT_VDDIO))
			early_delay(500);
		else {
			for (;;) {
				tmp = readl(&power_regs->hw_power_sts);
				if (tmp & POWER_STS_DC_OK)
					break;
			}
		}

		cur_target = readl(cfg->reg);
		cur_target &= cfg->trg_mask;
		cur_target *= cfg->step_mV;
		cur_target += cfg->lowest_mV;
	} while (new_target > cur_target);

	if (cfg->bo_irq) {
		if (adjust_up && powered_by_linreg) {
			writel(cfg->bo_irq, &power_regs->hw_power_ctrl_clr);
			if (bo_int & cfg->bo_enirq)
				setbits_le32(cfg->reg, cfg->bo_enirq);
		}

		clrsetbits_le32(cfg->reg, cfg->bo_offset_mask,
				new_brownout << cfg->bo_offset_offset);
	}
}

/**
 * mxs_setup_batt_detect() - Start the battery voltage measurement logic
 *
 * This function starts and configures the LRADC block. This allows the
 * power initialization code to measure battery voltage and based on this
 * knowledge, decide whether to boot at all, boot from battery or boot
 * from 5V input.
 */
static void mxs_setup_batt_detect(void)
{
	debug("SPL: Starting battery voltage measurement logic\n");

	mxs_lradc_init();
	mxs_lradc_enable_batt_measurement();
	early_delay(10);
}

/**
 * mxs_ungate_power() - Ungate the POWER block
 *
 * This function ungates clock to the power block. In case the power block
 * was still gated at this point, it will not be possible to configure the
 * block and therefore the power initialization would fail. This function
 * is only needed on i.MX233, on i.MX28 the power block is always ungated.
 */
static void mxs_ungate_power(void)
{
#ifdef CONFIG_MX23
	struct mxs_power_regs *power_regs =
		(struct mxs_power_regs *)MXS_POWER_BASE;

	writel(POWER_CTRL_CLKGATE, &power_regs->hw_power_ctrl_clr);
#endif
}

/**
 * mxs_power_init() - The power block init main function
 *
 * This function calls all the power block initialization functions in
 * proper sequence to start the power block.
 */
void mxs_power_init(void)
{
	struct mxs_power_regs *power_regs =
		(struct mxs_power_regs *)MXS_POWER_BASE;

	debug("SPL: Initialising Power Block\n");

	mxs_ungate_power();

	mxs_power_clock2xtal();
	mxs_power_set_auto_restart();
	mxs_power_set_linreg();
	mxs_power_setup_5v_detect();

	mxs_setup_batt_detect();

	mxs_power_configure_power_source();
	mxs_enable_output_rail_protection();

	debug("SPL: Setting VDDIO to 3V3 (brownout @ 3v15)\n");
	mxs_power_set_vddx(&mxs_vddio_cfg, 3300, 3150);

	debug("SPL: Setting VDDD to 1V5 (brownout @ 1v0)\n");
	mxs_power_set_vddx(&mxs_vddd_cfg, 1500, 1000);
#ifdef CONFIG_MX23
	debug("SPL: Setting mx23 VDDMEM to 2V5 (brownout @ 1v7)\n");
	mxs_power_set_vddx(&mxs_vddmem_cfg, 2500, 1700);
#endif
	writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ |
		POWER_CTRL_VDDIO_BO_IRQ | POWER_CTRL_VDD5V_DROOP_IRQ |
		POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_BATT_BO_IRQ |
		POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr);

	writel(POWER_5VCTRL_PWDN_5VBRNOUT, &power_regs->hw_power_5vctrl_set);

	early_delay(1000);
}

#ifdef	CONFIG_SPL_MXS_PSWITCH_WAIT
/**
 * mxs_power_wait_pswitch() - Wait for power switch to be pressed
 *
 * This function waits until the power-switch was pressed to start booting
 * the board.
 */
void mxs_power_wait_pswitch(void)
{
	struct mxs_power_regs *power_regs =
		(struct mxs_power_regs *)MXS_POWER_BASE;

	debug("SPL: Waiting for power switch input\n");
	while (!(readl(&power_regs->hw_power_sts) & POWER_STS_PSWITCH_MASK))
		;
}
#endif
OpenPOWER on IntegriCloud