summaryrefslogtreecommitdiffstats
path: root/cpu/ppc4xx
Commit message (Collapse)AuthorAgeFilesLines
* * Patch by Sean Chang, 9 Aug 2004:wdenk2004-09-291-9/+14
| | | | | | | | | | | | | | | | | | - Added I2C support for ML300. - Added support for ML300 to read out its environment information stored on the EEPROM. - Added support to use board specific parameters as part of U-Boot's environment information. - Updated MLD files to support configuration for new features above. * Patches by Travis Sawyer, 5 Aug 2004: - Remove incorrect bridge settings for eth group 6 - Add call to setup bridge in ppc_440x_eth_initialize - Fix ppc_440x_eth_init to reset the phy only if its the first time through, otherwise, just check the phy for the autonegotiated speed/duplex. This allows the use of netconsole - only print the speed/duplex the first time the phy is reset.
* cpu/ppc4xx/sdram.c rewritten now using get_ram_size()stroese2004-07-151-227/+38
|
* Fix problem in 405 i2c driver; don't try to print without console!stroese2004-07-021-1/+3
|
* Fix bug in 405 ethernet driver; allocated data not cleared!stroese2004-07-021-0/+2
|
* Patch by Andrea Marson, 11 Jun 2004:wdenk2004-07-011-2/+7
| | | | | | | Update for PPChameleon board: - support for SysClk @ 25MHz - support for Silicon Motion SM712 VGA controller - some clean ups
* * Fix flash parameters passed to Linux for PPChameleon boardwdenk2004-06-171-0/+2
| | | | * Remove eth_init() from lib_arm/board.c; it's done in net.net.c.
* Add support for the second Ethernet interface for the 'PPChameleon' board.wdenk2004-06-062-353/+494
|
* * Back out Patch by Christian Hohnstaedt, 23 Apr 2004:wdenk2004-04-251-3/+19
| | | | | | | | | (JFFS2 speed enhancements) because of using non-public data (PHYS_FLASH_SECT_SIZE) * Patch by Travis Sawyer, 23 Apr 2004: Fix VSC/CIS 8201 phy descrambler interoperability timing due to errata from Vitesse Semiconductor.
* Code cleanup; make several boards compile & link.wdenk2004-03-144-10/+10
|
* * Patches by Travis Sawyer, 12 Mar 2004:wdenk2004-03-141-70/+104
| | | | | | | | | | | | | | | | | | | | | - Fix Gigabit Ethernet support for 440GX - Add Gigabit Ethernet Support to MII PHY utilities * Patch by Brad Kemp, 12 Mar 2004: Fixes for drivers/cfi_flash.c: - Better support for x8/x16 implementations - Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE - Added defines for AMD command and address constants * Patch by Leon Kukovec, 12 Mar 2004: Fix get_dentfromdir() to correctly handle deleted dentries * Patch by George G. Davis, 11 Mar 2004: Remove hard coded network settings in TI OMAP1610 H2 default board config * Patch by George G. Davis, 11 Mar 2004: add support for ADS GraphicsClient+ board.
* * Patch by Stephan Linz, 09 Mar 2004wdenk2004-03-141-6/+23
| | | | | | | | | | | - Add support for the SSV ADNP/ESC1 (Nios Softcore) * Patch by George G. Davis, 9 Mar 2004: fix recent build failure for SA1100 target * Patch by Travis Sawyer, 09 Mar 2004: Support native interrupt mode for the IBM440GX. Previously it was running in 440GP compatibility mode.
* * Patch by Travis Sawyer, 01 Mar 2004:wdenk2004-03-142-10/+93
| | | | | | | | | | | | | | | | | | | Ocotea: - Add IBM PPC440GX Ref Platform support (Ocotea) Original code by Paul Reynolds <PaulReynolds@lhsolutions.com> Adapted to U-Boot and 440GX port 440gx_enet.c: - Add gracious handling of all Ethernet Pin Selections for 440GX - Add RGMII selection for Cicada CIS8201 Gigabit PHY ppc440.h: - Add needed bit definitions - Fix formatting * Patch by Carl Riechers, 1 Mar 2004: Add PPC440GX prbdv0 divider to fix memory clock calculation. * Patch by Stephan Linz, 27 Feb 2004 - avoid problems for targets without NFS download support
* * Patch by Peter Ryser, 20 Feb 2004:wdenk2004-02-231-0/+4
| | | | | | | | | | | | | Add support for the Xilinx ML300 platform * Patch by Stephan Linz, 17 Feb 2004: Fix watchdog support for NIOS * Patch by Josh Fryman, 16 Feb 2004: Fix byte-swapping for cfi_flash.c for different bus widths * Patch by Jon Diekema, 14 Jeb 2004: Remove duplicate "FPGA Support" notes from the README file
* * Patches by Reinhard Meyer, 14 Feb 2004:wdenk2004-02-233-7/+75
| | | | | | | | | | | | | | | | | | | | | | | | - update board/emk tree; use common flash driver - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c [adapted for other PPC CPUs -- wd] - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c * Patch by Jon Diekema, 13 Feb 2004: Call show_boot_progress() whenever POST "FAILED" is printed. * Patch by Nishant Kamat, 13 Feb 2004: Add support for TI OMAP1610 H2 Board Fixes for cpu/arm926ejs/interrupt.c (based on Richard Woodruff's patch for arm925, 16 Oct 03) Fix for a timer bug in OMAP1610 Innovator Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2 * Patches by Stephan Linz, 12 Feb 2004: - add support for NIOS timer with variable period preload counter value - prepare POST framework support for NIOS targets * Patch by Denis Peter, 11 Feb 2004: add POST support for the MIP405 board
* * CVS add missing fileswdenk2004-02-231-4/+4
| | | | | | | | | | | | | | | | | | | | | | | * Cleanup compiler warnings * Fix problem with side effects in macros in include/usb.h * Patch by David Benson, 13 Nov 2003: bug 841358 - fix TFTP download size limit * Fixing bug 850768: improper flush_cache() in load_serial() * Fixing bug 834943: MPC8540 - missing volatile declarations * Patch by Stephen Williams, 09 Feb 2004: Add support for Xilinx SystemACE chip: - New files common/cmd_ace.c and include/systemace.h - Hook systemace support into cmd_fat and the partition manager * Patch by Travis Sawyer, 09 Feb 2004: Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux
* * Patch by Travis Sawyer, 09 Feb 2004:wdenk2004-02-222-26/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | o 440GX: - Fix PCI Indirect access for type 1 config cycles with ppc440. - Add phymode for 440 enet - fix pci pre init o XPedite1K: - Change board_pre_init to board_early_init_f - Add user flash to bus controller setup - Fix pci pre init - Fix is_pci_host to check GPIO for monarch bit - Force xpedite1k to pci conventional mode (via #define option) * Patch by Brad Kemp, 4 Feb 2004: - handle the machine check that is generated during the PCI scans on 82xx processors. - define the registers used in the IMMR by the PCI subsystem. * Patch by Pierre Aubert, 03 Feb 2004: cpu/mpc5xxx/start.S: copy MBAR into SPR311 * Patch by Jeff Angielski, 03 Feb 2004: Fix copy & paste error in cpu/mpc8260/pci.c * Patch by Reinhard Meyer, 24 Jan 2004: Fix typo in cpu/mpc5xxx/pci_mpc5200.c
* * Patch by Yuli Barcohen, 26 Jan 2004:wdenk2004-02-081-0/+6
| | | | | | | | | | | | | | | | | | | Allow bzip2 compression for small memory footprint boards * Patch by Brad Kemp, 21 Jan 2004: Add support for CFI flash driver for both the Intel and the AMD command sets. * Patch by Travis Sawyer, 20 Jan 2004: Fix pci bridge auto enumeration of sibling p2p bridges. * Patch by Tolunay Orkun, 12 Jan 2004: Add some delays as needed for Intel LXT971A PHY support * Patches by Stephan Linz, 09 Jan 2004: - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c - make DK1C20 board configuration related to ASMI conform to documentation
* Patch by Travis Sawyer, 30 Dec 2003:wdenk2004-02-0610-31/+1749
| | | | | | | Add support for IBM PPC440GX. Multiple EMAC Ethernet devices, select MDI port based on enabled EMAC device. Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX base PrPMC board.
* * Cleanup lowboot code for MPC5200wdenk2004-01-021-1/+1
| | | | | | | | | | | | | | | | | | * Minor code cleanup (coding style) * Patch by Reinhard Meyer, 30 Dec 2003: - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE, - added CONFIG_PHY_ADDR to include/configs/IceCube.h, - turned debug print of PHY registers into a function (called in two places) - added support for EMK MPC5200 based modules * Fix MPC8xx PLPRCR_MFD_SHIFT typo * Add support for TQM866M modules * Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash) * Fix a few compiler warnings
* Debug printf's removed.stroese2003-12-091-0/+6
|
* Updated for PPC405EP boards (2 banks only).stroese2003-12-091-0/+8
|
* BUBINGA405EP port fixed.stroese2003-12-091-2/+82
|
* * Patch by Andre Schwarz, 24 Nov 2003:wdenk2003-12-071-0/+11
| | | | | | | | | | add support for mvblue (mvBlueLYNX and mvBlueBOX) boards * Patch by Pavel Bartusek, 21 Nov 2003: set ZMII bridge speed on 440 * Patch by Anders Larsen, 17 Nov 2003: Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
* * Patch by Gleb Natapov, 19 Sep 2003:wdenk2003-12-062-89/+8
| | | | | | | | Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c * Patch by Anders Larsen, 17 Sep 2003: Bring ARM memory layout in sync with the documentation: stack and malloc-heap are now located _below_ the U-Boot code
* * Use "-fPIC" instead of "-mrelocatable" to prevent problems withwdenk2003-11-171-2/+1
| | | | | | | | | | | | | recent tools * Add checksum verification to 'imls' command * Add bd_info fields needed for 4xx Linux I2C driver * Patch by Martin Krause, 4 Nov. 2003: Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap) * Print used network interface when CONFIG_NET_MULTI is set
* Fix PCI problems on PPChameleon boardwdenk2003-10-221-1/+4
|
* PPC405EP: set vendor id.stroese2003-09-121-0/+4
|
* Disable memory controller before setting first values.stroese2003-09-121-0/+5
|
* * Add support for USB Mass Storage Devices (BBB)wdenk2003-09-101-7/+7
| | | | | | (tested with USB memory sticks only) * Avoid flicker on TRAB's VFD
* Adjustments / cleanup for PPChameleon EVB boardwdenk2003-09-031-60/+50
|
* Fix compile problemwdenk2003-09-021-0/+4
|
* * Add support for PPChameleon Eval Boardwdenk2003-09-023-6/+9
| | | | | | | * Add support for P3G4 board * Fix problem with MGT5100 FEC driver: add "early" MAC address initialization
* * Implement new mechanism to export U-Boot's functions to standalonewdenk2003-07-241-69/+1
| | | | | | | | applications: instead of using (PPC-specific) system calls we now use a jump table; please see doc/README.standalone for details * Patch by Dave Westwood, 24 Jul 2003: added support for Unity OS (a proprietary OS)
* * Code cleanup:wdenk2003-06-2714-932/+926
| | | | | | | | | - remove trailing white space, trailing empty lines, C++ comments, etc. - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c) * Patches by Kenneth Johansson, 25 Jun 2003: - major rework of command structure (work done mostly by Michal Cendrowski and Joakim Kristiansen)
* * Patch by Nicolas Lacressonniere, 11 Jun 2003:wdenk2003-06-161-1/+1
| | | | | | | | | | | | | | | | Modifications for Atmel AT91RM9200DK ARM920T based development kit - Add Atmel DataFlash support for reading and writing. - Add possibility to boot a Linux from DataFlash with BOOTM command. - Add Flash detection on Atmel AT91RM9200DK (between Atmel AT49BV1614 and AT49BV1614A flashes) - Replace old Ethernet PHY layer functions - Change link address * Patch by Frank Smith, 9 Jun 2003: use CRIT_EXCEPTION for machine check on 4xx * Patch by Detlev Zundel, 13 Jun 2003: added implementation of the "carinfo" command in cmd_immap.c
* * Patch by Vladimir Gurevich, 04 Jun 2003:wdenk2003-06-051-13/+54
| | | | make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
* - Fix bug for initial stack in data cache as pointed out by Thomas Schaefer ↵stroese2003-06-051-7/+92
| | | | (tschaefer@giga-stream.de). Now inital stack in data cache can be used even if the chip select is in use.
* * Patch by Denis Peter, 04 June 2003:wdenk2003-06-042-5/+8
| | | | add support for the MIP405T board
* * Patches by Udi Finkelstein, 2 June 2003:wdenk2003-06-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | - Added support for custom keyboards, initialized by defining a board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD . - Added support for the RBC823 board. - cpu/mpc8xx/lcd.c now automatically calculates the Horizontal Pixel Count field. * Fix alignment problem in BOOTP (dhcp_leasetime option) [pointed out by Nicolas Lacressonnière, 2 Jun 2003] * Patch by Mark Rakes, 14 May 2003: add support for Intel e1000 gig cards. * Patch by Nye Liu, 3 Jun 2003: fix critical typo in MAMR definition (include/mpc8xx.h) * Fix requirement to align U-Boot image on 16 kB boundaries on PPC. * Patch by Klaus Heydeck, 2 Jun 2003 Minor changes for KUP4K configuration
* * Get (mostly) rid of CFG_MONITOR_LEN definition; compute real lengthwdenk2003-05-301-8/+3
| | | | | | | | instead CFG_MONITOR_LEN is now only used to determine _at_compile_ _time_ (!) if the environment is embedded within the U-Boot image, or in a separate flash sector. * Cleanup CFG_DER #defines in config files (wd maintained only)
* - PPC405EP support added.stroese2003-05-231-66/+103
| | | | - CONFIG_UART1_CONSOLE added (see README).
* PPC405EP support added.stroese2003-05-238-21/+404
|
* * Patch by Dave Ellis, 22 May 2003:wdenk2003-05-222-3/+3
| | | | | | | | Fix problem with only partially cleared .bss segment * Patch by Rune Torgersen, 12 May 2003: get PCI to work on a MPC8266ADS board; incorporate change to cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
* Changed PPC405GPr version from A to B.stroese2003-04-043-5/+5
|
* Clip udiv to 5 bits on PPC405 (serial.c).stroese2003-03-201-0/+2
|
* Set edge conditioning circuitry on PPC405GPr for compatibility to existing ↵stroese2003-03-201-0/+10
| | | | PPC405GP designs.
* * Patches by David Müller, 31 Jan 2003:wdenk2003-03-061-0/+19
| | | | | | | | | | | | | | | | | - minimal setup for CardBus bridges - add EEPROM read/write support in the CS8900 driver - add support for the builtin I2C controller in the Samsung s3c24x0 chips - add support for MPL's VCMA9 (Samsung s3c2410 based) board * Patch by Steven Scholz, 04 Feb 2003: add support for RTC DS1307 * Patch by Reinhard Meyer, 5 Feb 2003: fix PLPRCR/SCCR init sequence on 8xx to allow for changes of EBDF by software * Patch by Vladimir Gurevich, 07 Feb 2003: "API-compatibility patch" for 4xx I2C driver
* * Patches by Robert Schwebel, 06 Mar 2003:wdenk2003-03-061-0/+8
| | | | | | | | | | | - fix bug in BOOTP code (must use NetCopyIP) - update of CSB226 port - clear BSS segment on XScale - added support for i2c_init_board() function - update to the Innokom plattform * Extend support for redundand environments for configurations where environment size < sector size
* * Patch by Rune Torgersen, 13 Feb 2003:wdenk2003-03-061-48/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Motorola MPC8266ADS board * Patch by Kyle Harris, 19 Feb 2003: patches for the Intel lubbock board: memsetup.S - general cleanup (based on Robert's csb226 code) flash.c - overhaul, actually works now lubbock.c - fix init funcs to return proper value * Patch by Kenneth Johansson, 26 Feb 2003: - Fixed off by one in RFTA calculation. - No need to abort when LDF is lower than we can program it's only minimum timing so clamp it to what we can do. - Takes function pointer to function for reading the spd_nvram. Usefull for faking data or hardcode a module without the nvram. - fix other user for above change - fix some comments. * Patches by Brian Waite, 26 Feb 2003: - fix port for evb64260 board - fix PCI for evb64260 board - fix PCI scan * Patch by Reinhard Meyer, 1 Mar 2003: Add support for EMK TOP860 Module * Patch by Yuli Barcohen, 02 Mar 2003: Add SPD EEPROM support for MPC8260ADS board
* Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).stroese2003-02-171-1/+1
|
OpenPOWER on IntegriCloud