summaryrefslogtreecommitdiffstats
path: root/arch
Commit message (Collapse)AuthorAgeFilesLines
* arm: imx6: Switch DDR3 calibration to wait_for_bit()Marek Vasut2016-03-251-32/+12
| | | | | | | | | Switch the DDR3 calibration from ad-hoc implementation of wait_for_bit() to generic implementation of wait_for_bit(). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
* imx: print ARM clock for clocks commandPeng Fan2016-03-251-0/+1
| | | | | | | | | | | | | | | | | Default print ARM clock for clocks command. Test on i.MX6UL 14x14 evk board: " => clocks PLL_SYS 792 MHz PLL_BUS 528 MHz PLL_OTG 480 MHz PLL_NET 50 MHz ARM 396000 kHz " Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Stefano Babic <sbabic@denx.de>
* imx: mx6ul configure the PMIC_STBY_REQ pin as open drainPeng Fan2016-03-251-1/+11
| | | | | | | | | Configure the PMIC_STBY_REQ pin as open drain 100K according to the design team's requirement for the PMIC_STBY_REQ pin for i.MX 6UltraLite TO1.0. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Stefano Babic <sbabic@denx.de>
* imx: mx6ul: skip setting ahb ratePeng Fan2016-03-251-7/+12
| | | | | | | | To i.MX6UL, default ARM rate and AHB rate is 396M and 198M, no need to set them. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Stefano Babic <sbabic@denx.de>
* imx: mx6: Fix incorrect clear mmdc_ch0 handshake maskYe Li2016-03-251-1/+4
| | | | | | | | | | | Since the MX6UL/SL/SX only has one DDR channel, in CCM_CCDR register the bit[17] for mmdc_ch0 is reserved and its proper state should be 1. When clear this bit, the periph_clk_sel cannot be set and that CDHIPR[periph_clk_sel_busy] handshake never clears. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <van.freenix@gmail.com> Acked-by: Stefano Babic <sbabic@denx.de>
* Merge branch 'next'Stefano Babic2016-03-204-0/+34
|\
| * mx7: Distinguish between dual and solo versionsFabio Estevam2016-03-093-0/+21
| | | | | | | | | | | | | | | | | | | | Read the number of cores in the fuses to distinguish between the dual and solo versions. Tested on a mx7d sabresd and on a mx7solo warp7. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
| * arm: imx: Add support for GE Bx50v3 boardsAkshay Bhat2016-03-091-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for GE B450v3, B650v3 and B850v3 boards. The boards are based on Advantech BA16 module which has a i.MX6D processor. The boards support: - FEC Ethernet - USB Ports - SDHC and MMC boot - SPI NOR - LVDS and HDMI display Basic information about the module: - Module manufacturer: Advantech - CPU: Freescale ARM Cortex-A9 i.MX6D - SPECS: Up to 2GB Onboard DDR3 Memory; Up to 16GB Onboard eMMC NAND Flash Supports OpenGL ES 2.0 and OpenVG 1.1 HDMI, 24-bit LVDS 1x UART, 2x I2C, 8x GPIO, 4x Host USB 2.0 port, 1x USB OTG port, 1x micro SD (SDHC),1x SDIO, 1x SATA II, 1x 10/100/1000 Mbps Ethernet, 1x PCIe X1 Gen2 Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
* | dts:exynos:update pinctrl size-cells and fix child regsPrzemyslaw Marczak2016-03-175-29/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change is required to avoid warnings about invalid size-cells defined in device-tree pinctrl nodes for Exynos. Tested on: - Odroid U3 - Odroid XU3 Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@nvidia.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Minkyu Kang <mk7.kang@samsung.com>
* | x86: Add congatec conga-QA3/E3845-4G (Bay Trail) supportStefan Roese2016-03-173-0/+283
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the congatec conga-QA3/E3845-4G eMMC8 SoM, installed on the congatec Qseven 2.0 evaluation carrier board (conga-QEVAL). Its port is very similar to the MinnowboardMAX port and also uses the Intel FSP as described in doc/README.x86. Currently supported are the following interfaces / devices: - UART (via Winbond legacy SuperIO chip on carrier board) - Ethernet (PCIe Intel I210 / E1000) - SPI including SPI NOR as boot-device - USB 2.0 - SATA via U-Boot SCSI IF - eMMC - Video (HDMI output @ 800x600) - PCIe Not supported yet is: - I2C - USB 3.0 Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: Add support for the samus chromebookSimon Glass2016-03-172-0/+629
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds basic support for chromebook_samus. This is the 2015 Pixel and is based on an Intel broadwell platform. Supported so far are: - Serial - SPI flash - SDRAM init (with MRC cache) - SATA - Video (on the internal LCD panel) - Keyboard Various less-visible drivers are provided to make the above work (e.g. PCH, power control and LPC). The platform requires various binary blobs which are documented in the README. The major missing feature is USB3 since the existing U-Boot support does not work correctly with Intel XHCI controllers. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: Support a chained-boot development flowSimon Glass2016-03-171-0/+80
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sometimes it is useful to jump into U-Boot directly from coreboot or UEFI without any 16-bit init. This can help during development by allowing U-Boot to avoid doing all the init required by the platform. U-Boot expects its GDT to be set up correctly by its 16-bit code. If coreboot doesn't do this (because it hasn't run the payload setup code yet) then this won't happen. In this case we cannot rely on the GDT settings. U-Boot will hang or crash if these are wrong. Provide a development-only option to set up the GDT correctly. This is just a hack so you can jump to U-Boot from any stage of coreboot, not just at the end. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: dts: Drop memory SPD compatible stringSimon Glass2016-03-171-1/+0
| | | | | | | | | | | | | | | | This is not needed now that the memory controller driver has the SPD data in its own node. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: ivybridge: Convert to use the common SDRAM codeSimon Glass2016-03-171-311/+83
| | | | | | | | | | | | | | Adjust the existing implementation to use the new common SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: Add common SDRAM-init codeSimon Glass2016-03-173-0/+327
| | | | | | | | | | | | | | | | | | The code to call the memory reference code is common to several Intel CPUs. Add common code for performing this init. Intel calls this 'Pre-EFI-Init' (PEI), where EFI stands for Extensible Firmware Interface. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: Move common PCH code into a common placeSimon Glass2016-03-176-84/+99
| | | | | | | | | | | | | | | | The SATA indexed register write functions are common to several Intel PCHs. Move this into a common location. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | arm: Add a 64-bit division routine to the private librarySimon Glass2016-03-172-1/+247
| | | | | | | | | | | | | | | | | | | | | | | | This is missing, with causes lldiv() to fail on boards with use the private libgcc. Add the missing routine. Code is available for using the CLZ instruction but it is not enabled at present. This comes from coreboot version 4.0. Signed-off-by: Simon Glass <sjg@chromium.org>
* | x86: Add a function to set the IOAPIC IDSimon Glass2016-03-172-0/+18
| | | | | | | | | | | | | | Add a function to set the ID in the IOAPIC. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: broadwell: Add support for high-speed I/O lane with MESimon Glass2016-03-172-0/+58
| | | | | | | | | | | | | | | | Provide a way to determine the HSIO (high-speed I/O) version supported by the Intel Management Engine (ME) implementation on the platform. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: broadwell: Add support for SDRAM setupSimon Glass2016-03-174-0/+509
| | | | | | | | | | | | | | | | | | Broadwell uses a binary blob called the memory reference code (MRC) to start up its SDRAM. This is similar to ivybridge so we can mostly use common code for running this blob. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: broadwell: Add power-control supportSimon Glass2016-03-173-0/+220
| | | | | | | | | | | | | | | | | | | | Broadwell requires quite a bit of power-management setup. Add code to set this up correctly. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com> [squashed in http://patchwork.ozlabs.org/patch/598373/] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: broadwell: Add reference code supportSimon Glass2016-03-172-0/+114
| | | | | | | | | | | | | | | | Broadwell needs a special binary blob to set up the PCH. Add code to run this on start-up. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: broadwell: Add an LPC driverSimon Glass2016-03-173-0/+110
| | | | | | | | | | | | | | | | Add a driver for the broadwell LPC (low-pin-count peripheral). This mostly uses common code. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: broadwell: Add a northbridge driverSimon Glass2016-03-172-0/+60
| | | | | | | | | | | | | | | | Add a driver for the broadwell northbridge. This sets up the location of several blocks of registers. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: broadwell: Add a SATA driverSimon Glass2016-03-172-0/+270
| | | | | | | | | | | | | | | | Add a SATA driver for broadwell. This supports connecting an SSD and the usual U-Boot commands to read and write data. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: broadwell: Add a pinctrl driverSimon Glass2016-03-173-0/+370
| | | | | | | | | | | | | | | | | | | | | | GPIO pins need to be set up on start-up. Add a driver to provide this, configured from the device tree. The binding is slightly different from the existing ICH6 binding, since that is quite verbose. The new binding should be just as extensible. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: broadwell: Add a PCH driverSimon Glass2016-03-174-0/+839
| | | | | | | | | | | | | | Add a driver for the broadwell low-power platform controller hub. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: Add basic support for broadwellSimon Glass2016-03-1710-0/+1246
| | | | | | | | | | | | | | | | This adds the broadwell architecture, with the CPU driver and some useful header files. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: Add support for running Intel reference codeSimon Glass2016-03-172-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | Intel has invented yet another binary blob which firmware is required to run. This is run after SDRAM is ready. It is linked to load at a particular address, typically 0, but is a relocatable ELF so can be moved if required. Add support for this in the build system. The file should be placed in the board directory, and called refcode.elf. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: Drop all the old pin configuration codeSimon Glass2016-03-171-141/+0
| | | | | | | | | | | | | | | | We don't need this anymore - we can use device tree and the new pinconfig driver instead. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: Add an ICH6 pin configuration driverSimon Glass2016-03-173-0/+218
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a driver which sets up the pin configuration on x86 devices with an ICH6 (or later) Platform Controller Hub. The driver is not in the pinctrl uclass due to some oddities of the way x86 devices work: - The GPIO controller is not present in I/O space until it is set up - This is done by writing a register in the PCH - The PCH has a driver which itself uses PCI, another driver - The pinctrl uclass requires that a pinctrl device be available before any other device can be probed It would be possible to work around the limitations by: - Hard-coding the GPIO address rather than reading it from the PCH - Using special x86 PCI access to set the GPIO address in the PCH However it is not clear that this is better, since the pin configuration driver does not actually provide normal pin configuration services - it simply sets up all the pins statically when probed. While this remains the case, it seems better to use a syscon uclass instead. This can be probed whenever it is needed, without any limitations. Also add an 'invert' property to support inverting the input. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: link: Add pin configuration to the device treeSimon Glass2016-03-171-0/+155
| | | | | | | | | | | | | | | | | | | | | | | | At present pin configuration on link does not use the standard mechanism, but some rather ugly custom code. As a first step to resolving this, add the pin configuration to the device tree. Four of the GPIOs must be available before relocation (for SDRAM pin strapping). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: Update microcode for secondary CPUsSimon Glass2016-03-175-2/+12
| | | | | | | | | | | | | | | | Each CPU needs to have its microcode loaded. Add support for this so that all CPUs will have the same version. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: ivybridge: Show microcode version for each coreSimon Glass2016-03-171-1/+2
| | | | | | | | | | | | | | | | Enable the microcode feature so that the microcode version is shown with the 'cpu detail' command. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: Record the CPU details when starting each coreSimon Glass2016-03-173-1/+20
| | | | | | | | | | | | | | | | As each core starts up, record its microcode version and CPU ID so these can be presented with the 'cpu detail' command. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: Move common MRC Kconfig options to the common fileSimon Glass2016-03-172-26/+62
| | | | | | | | | | | | | | | | At present the MRC options are private to ivybridge. Other Intel CPUs also use these settings. Move them to a common place. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: Allow I/O functions to use pointersSimon Glass2016-03-171-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is common with memory-mapped I/O to use the address of a structure member to access memory, as in: struct some_regs { u32 ctrl; u32 data; } struct some_regs *regs = (struct some_regs *)BASE_ADDRESS; writel(1, &reg->ctrl); writel(2, &reg->data); This does not currently work with inl(), outl(), etc. Add a cast to permit this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: Add macros to clear and set I/O bitsSimon Glass2016-03-171-0/+22
| | | | | | | | | | | | | | | | | | | | The clrsetbits_...() macros are useful for working with memory mapped I/O. But they do not work with I/O space, as used on x86 machines. Add some macros to provide similar features for I/O. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: ivybridge: Drop sandybridge_early_init()Simon Glass2016-03-171-2/+0
| | | | | | | | | | | | | | | | This function was removed in the previous clean-up. Drop it from the header file also. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: Move Intel Management Engine code to a common placeSimon Glass2016-03-1710-369/+418
| | | | | | | | | | | | | | | | | | | | Some of the Intel ME code is common to several Intel CPUs. Move it into a common location. Add a header file for report_platform.c also. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [squashed in http://patchwork.ozlabs.org/patch/598372/] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: Rename PORT_RESET to IO_PORT_RESETSimon Glass2016-03-173-5/+5
| | | | | | | | | | | | | | This same name is used in USB. Add a prefix to distinguish it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: Move common CPU code to its own placeSimon Glass2016-03-176-76/+162
| | | | | | | | | | | | | | | | Some of the Intel CPU code is common to several Intel CPUs. Move it into a common location along with required declarations. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: Move common LPC code to its own placeSimon Glass2016-03-176-85/+166
| | | | | | | | | | | | | | | | Some of the LPC code is common to several Intel LPC devices. Move it into a common location. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: Add the root-complex block to common intel registersSimon Glass2016-03-174-7/+9
| | | | | | | | | | | | | | | | This is similar to MCH in that it is used in various drivers. Add it to the common header. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: Create a common header for Intel register accessSimon Glass2016-03-176-6/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There are several blocks of registers that are accessed from all over the code on Intel CPUs. These don't currently have their own driver and it is not clear whether having a driver makes sense. An example is the Memory Controller Hub (MCH). We map it to a known location on some Intel chips (mostly those without FSP - Firmware Support Package). Add a new header file for these registers, and move MCH into it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: Move microcode code to a common locationSimon Glass2016-03-176-4/+8
| | | | | | | | | | | | | | This code is used on several Intel CPUs. Move it into a common location. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: Move cache-as-RAM code into a common locationSimon Glass2016-03-174-1/+8
| | | | | | | | | | | | | | | | This cache-as-RAM (CAR) code is common to several Intel chips. Create a new intel_common directory and move it in there. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: cpu: Add functions to return the family and steppingSimon Glass2016-03-172-0/+24
| | | | | | | | | | | | | | | | These two identifiers can be useful for drivers which need to adjust their behaviour depending on the CPU family or stepping (revision). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: broadwell: Add a few microcode filesSimon Glass2016-03-172-0/+2272
| | | | | | | | | | | | | | Add two microcode files for broadwell. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
* | x86: Add comments to the SIPI vectorSimon Glass2016-03-172-0/+2
| | | | | | | | | | | | | | | | | | The Intel SIPI (start-up inter-processor interrupt) vector is the entry point for each secondary CPU (also called an AP - applications processor). The assembler and C code are linked, so add comments to indicate this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
OpenPOWER on IntegriCloud