summaryrefslogtreecommitdiffstats
path: root/arch/arm/include
Commit message (Collapse)AuthorAgeFilesLines
* ls102xa: etsec: Use proper settings for BE BDsClaudiu Manoil2015-09-011-1/+1
| | | | | | | | | | | | | | | Replace the DMACTRL[LE] hack with recommended settings for ETSECDMAMCR to get the same end effect - obtaining big-endian buffer descriptors and frame data for eTSEC. The reset / default value for ETSECDMAMCR is preserved, excepting the BD and FR bits which are cleared to enable the BE mode in accordance with the H/W specifications. Fixes: 52d00a8 "ls102xa: etsec: Add etsec support for LS102xA" Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Acked-by: Alison Wang <alison.wang@freescale.com> Tested-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* SECURE_BOOT: Disable IE Key feature for RAMBOOTAneesh Bansal2015-09-012-14/+22
| | | | | | | | | | | | | | ISBC Key Extension feature is not applicable for RAMBOOT as there is no way to retrieve the CSF Header and validated IE Key table from SRAM once CPC has been disabled. The feature is only applicable in case of NOR SECURE BOOT. Code Cleanup: The SECURE_BOOT specific defines have been moved from arch-ls102xa/config.h to arm/include/asm/fsl_secure_boot.h Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* armv8: Add framework for CCN-504 interconnect configurationBhupesh Sharma2015-09-011-0/+11
| | | | | | | | | | | | This patch adds a minimal framework for Dickens CCN-504 interconnect configuration - mainly related to adding Clusters/cores to snoop/DVM domain and setting QoS of the RN-I ports. LS2085A platform makes use of these configurations to support better network data performance and to boot a SMP Linux. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* sunxi: Enable non-secure access to RTC on sun6i (A31s)Chen-Yu Tsai2015-08-311-0/+23
| | | | | | | | | | | | | | On the A31s the RTC is by default secured. Thus when u-boot loads the kernel in non-secure world, the RTC is unavailable. The SoC has a TrustZone Protection Controller, which can be used to enable non-secure access to the RTC. On the A31 the TZPC doesn't seem to do anything, i.e. changes to its register contents do not affect access to the RTC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* ARM: AM43xx: Add functions to enable and disable USB clocksKishon Vijay Abraham I2015-08-281-0/+3
| | | | | | | | | | | Added functions to enable and disable USB clocks which can be invoked during USB init and USB exit respectively. Cc: Roger Quadros <rogerq@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: OMAP5: Add functions to enable and disable USB clocksKishon Vijay Abraham I2015-08-281-0/+4
| | | | | | | | | | | Added functions to enable and disable USB clocks which can be invoked during USB init and USB exit respectively. Cc: Roger Quadros <rogerq@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* board: ti: OMAP5: added USB initializtion codeKishon Vijay Abraham I2015-08-281-0/+6
| | | | | | | | | Implemented board_usb_init(), board_usb_cleanup() and usb_gadget_handle_interrupts() in omap5 board file that can be invoked by various gadget drivers. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* board: ti: beagle_x15: added USB initializtion codeKishon Vijay Abraham I2015-08-281-1/+1
| | | | | | | | | Implemented board_usb_init(), board_usb_cleanup() and usb_gadget_handle_interrupts() in beagle_x15 board file that can be invoked by various gadget drivers. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: DRA7: Enable clocks for USB OTGSS2 and USB PHY2Kishon Vijay Abraham I2015-08-282-0/+5
| | | | | | | | Enabled clocks for the second dwc3 controller and second USB PHY present in DRA7. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* arm: spear: Move to common SPL infrastructureStefan Roese2015-08-281-2/+0
| | | | | | | | | | | | | The SPL implementation for SPEAr600 is older than the common SPL infrastructure. This patch now moves the SPEAr600 SPL over to the common SPL code. Tested on the only SPEAr board that currently uses SPL in mainline U-Boot, the x600. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Vipin Kumar <vk.vipin@gmail.com>
* ARM: DRA74-evm: Use SMA_1 spare register to workaround DP83865 phy on SR2.0Nishanth Menon2015-08-283-0/+7
| | | | | | | | | | | | | | | | | | | DP83865 ethernet phy used on DRA74x-evm is quirky and the datasheet provided IODELAY values for standard RGMII phys do not work. Silicon Revision(SR) 2.0 provides an alternative bit configuration that allows us to do a "gross adjustment" to launch the data off a different internal clock edge. Manual IO Delay overrides are still necessary to fine tune the clock-to-data delays. This is a necessary workaround for the quirky ethernet Phy we have on the platform. NOTE: SMA registers are spare "kitchen sink" registers that does contain bits for other workaround as necessary as well. Hence the control for the same is introduced in a generic SoC specific, board generic location. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: DRA7: Add detection of ES2.0Nishanth Menon2015-08-282-0/+2
| | | | | | | | | | | | | | | | | Add support for detection of ES2.0 version of DRA7 family of processors. ES2.0 is an incremental revision with various fixes including the following: - reset logic fixes - few assymetric aging logic fixes - MMC clock rate fixes - Ethernet speed fixes - edma fixes for mcasp [ravibabu@ti.com: posted internal for an older bootloader] Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* Merge git://git.denx.de/u-boot-nand-flashTom Rini2015-08-261-0/+2
|\
| * mtd: nand: mxs support oobsize bigger than 512Peng Fan2015-08-251-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If ecc chunk data size is 512 and oobsize is bigger than 512, there is a chance that block_mark_bit_offset conflicts with bch ecc area. The following graph is modified from kernel gpmi-nand.c driver with each data block 512 bytes. We can see that Block Mark conflicts with ecc area from bch view. We can enlarge the ecc chunk size to avoid this problem to those oobsize which is larger than 512. | P | |<----------------------------------------------------------------->| | | | (Block Mark) | | P' | | | | |<--------------------------------------------------->| D | | O'| | |<--------->| |<->| V V V V V +---+--------------+-+--------------+-+--------------+-+----------+-+---+ | M | data |E| data |E| data |E| data |E| | +---+--------------+-+--------------+-+--------------+-+----------+-+---+ ^ ^ | O | |<---------------->| P : the page size for BCH module. E : The ECC strength. G : the length of Galois Field. N : The chunk count of per page. M : the metasize of per page. C : the ecc chunk size, aka the "data" above. P': the nand chip's page size. O : the nand chip's oob size. O': the free oob. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Reviewed-by: Marek Vasut <marex@denx.de> Tested-By: Tim Harvey <tharvey@gateworks.com>
* | arm: pxa: use common timer functionsAndrew Ruder2015-08-242-1/+29
|/ | | | | | | | | | | | | | | | | This patch moves pxa to the common timer functions added in commit 8dfafdd - Introduce common timer functions <Rob Herring> The (removed) pxa timer code (specifically __udelay()) could deadlock at the 32-bit boundary of get_ticks(). get_ticks() returned a 32-bit value cast up to a 64-bit value. If get_ticks() + tmo in __udelay() crossed the 32-bit boundary, the while condition became unconditionally true and locked the processor. Rather than patch the specific pxa issues, simply move everything over to the common code. Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com> Cc: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsuiko.com>
* arm: at91: add support for mini-box picosam9g45 boardErik van Luijk2015-08-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bootlog: U-Boot SPL 2015.10-rc1-00452-g96a7ed1 (Aug 17 2015 - 10:32:21) mci: setting clock 258000 Hz, block size 512 mci: setting clock 258000 Hz, block size 512 mci: setting clock 258000 Hz, block size 512 mci: setting clock 33024000 Hz, block size 512 reading u-boot.img reading u-boot.img U-Boot 2015.10-rc1-00452-g96a7ed1 (Aug 17 2015 - 10:32:21 +0000) CPU: AT91SAM9G45 Crystal frequency: 12 MHz CPU clock : 400 MHz Master clock : 133.333 MHz Watchdog enabled DRAM: 256 MiB WARNING: Caches not enabled MMC: mci: 0 mci: setting clock 260416 Hz, block size 512 mci: setting clock 260416 Hz, block size 512 mci: setting clock 260416 Hz, block size 512 mci: setting clock 33333333 Hz, block size 512 reading uboot.env In: serial Out: serial Err: serial Net: macb0 Error: macb0 address not set. Hit any key to stop autoboot: 0 U-Boot> Signed-off-by: Erik van Luijk <evanluijk@interact.nl> [add 'picosam9g45_defconfig' to MAINTAINERS] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* Merge git://git.denx.de/u-boot-usbTom Rini2015-08-191-0/+2
|\
| * usb: spear: Add support for both SPEAr600 EHCI controllersStefan Roese2015-08-191-0/+2
| | | | | | | | | | | | | | | | | | | | | | USB EHCI on SPEAr600 has not been tested for a while. The base controller addresses are missing. This patch adds the defines to the header. And adds the missing code. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Vipin Kumar <vk.vipin@gmail.com> Cc: Marek Vasut <marex@denx.de>
* | zynqmp: usb: Add usb dwc3 driver support for zynqmpSiva Durga Prasad Paladugu2015-08-191-0/+3
| | | | | | | | | | | | | | | | | | | | Added usb dwc3 driver support for zynqmp this also supports the DFU and LTHOR to download the linux images on to RAM and cen be booted from those linux images. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | zynqmp: Enable U-Boot run in EL3Michal Simek2015-08-191-0/+4
|/ | | | | | | Enable Secure IOU setup to enable U-Boot to run in EL3 without setting from ATF. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* lpc32xx: add common USB OHCI defines for all LPC32xx boardsVladimir Zapolskiy2015-08-181-0/+9
| | | | | | | | The change adds a number of macro definitions used by USB OHCI driver, if CONFIG_USB_OHCI_LPC32XX is selected from a board config file. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Tested-by: Sylvain Lemieux <slemieux@tycoint.com>
* usb: lpc32xx: add host USB driverSylvain Lemieux2015-08-182-0/+13
| | | | | | | | | | | | | Incorporate USB driver from legacy LPCLinux NXP BSP. The files taken from the legacy patch are: - lpc32xx USB driver - lpc3250 header file USB registers definition. The legacy driver was updated and clean-up as part of the integration with the latest u-boot. Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Vladimir Zapolskiy <vz@mleia.com>
* lpc32xx: move common SLC NAND defines to arch/config.hVladimir Zapolskiy2015-08-181-0/+29
| | | | | | | | | | | | | | | A number of LPC32xx SLC NAND defines is dictated by controller hardware limits and OOB layout is defined by operating system, the definitions are common for all users. Since those macro are used in out of NAND SLC driver code (simple NAND SPL framework), they can not be placed into the driver, therefore move them from board config files to arch/config.h The change also adds OOB layout details specific to small page NAND devices taken from Linux kernel. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Tested-by: Sylvain Lemieux <slemieux@tycoint.com>
* dma: lpc32xx: add DMA driverSylvain Lemieux2015-08-183-0/+71
| | | | | | | | | | | | | Incorporate DMA driver from legacy LPCLinux NXP BSP. The files taken from the legacy patch are: - lpc32xx DMA driver - lpc3250 header file DMA registers definition. The legacy driver was updated and clean-up as part of the integration with the latest u-boot. Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Vladimir Zapolskiy <vz@mleia.com>
* Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2015-08-184-0/+19
|\
| * ARM: dra7xx_evm: Enable EDMA3 in SPL to support DMA on qspiVignesh R2015-08-171-0/+5
| | | | | | | | | | | | | | | | | | | | | | Enable TI_EDMA3 and SPL_DMA support, so as to reduce boot time. With DMA enabled there is almost 3x improvement in read performance. This helps in reducing boot time in qspiboot mode Also add EDMA3 base address for DRA7XX and AM57XX. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * dma: ti-edma3: Add helper function to support edma3 transferVignesh R2015-08-171-0/+2
| | | | | | | | | | Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: OMAP5: Add functions to enable and disable EDMA3 clocksVignesh R2015-08-171-0/+7
| | | | | | | | | | | | | | | | | | Adds functions to enable and disable edma3 clocks which can be invoked by drivers using edma3 to control the clocks. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: OMAP5: Add support for disabling clocks in ubootKishon Vijay Abraham I2015-08-171-0/+4
| | | | | | | | | | | | | | | | | | Add do_disable_clocks() to disable clock domains and module clocks. These clocks are enabled using do_enable_clocks(). Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * ARM: AM43xx: Add support for disabling clocks in ubootKishon Vijay Abraham I2015-08-171-0/+1
| | | | | | | | | | | | | | | | | | Add do_disable_clocks() to disable clock domains and module clocks. These clocks are enabled using do_enable_clocks(). Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini2015-08-1832-8675/+0
|\ \
| * | ARM: exynos: move SoC sources to mach-exynosThomas Abraham2015-08-1732-8675/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | Move arch/arm/cpu/armv7/exynos/* to arch/arm/mach-exynos/* to allow reuse of existing code for ARMv8 based Exynos platforms. Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | arm: lpc32xx: gpio macro for pin mappingSylvain Lemieux2015-08-171-0/+40
| | | | | | | | | | | | Add LPC32xx GPIO interface macro for pin mapping. Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
* | arm: lpc32xx: mux: add missing registersSylvain Lemieux2015-08-172-1/+18
|/ | | | | | | Add missing registers in struct definition. Update GPIO MUX base register to match GPIO base (refer to "LPC32x0 User manual" Rev. 3 - 22 July 2011). Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
* sun6i: clock: Add support for the mipi pllHans de Goede2015-08-142-0/+15
| | | | | | | | Add support for the mipi pll, this is necessary for getting higher dotclocks with lcd panels. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: clock: Add clock_get_pll3() helper functionHans de Goede2015-08-142-0/+8
| | | | | | | Add a helper function to get the pll3 clock rate. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: display: Fix composite video out on sun5iHans de Goede2015-08-142-1/+16
| | | | | | | | The tv-encoder on sun5i is slightly different compared to the one on sun4i/sun7i. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* ARM: tegra: Make pinmux.h standalone includibleThierry Reding2015-08-131-0/+2
| | | | | | | | | | | This header file uses type definitions (u8, u32) from linux/types.h but doesn't include it. If includes aren't carefully ordered this can cause build failures. Cc: Tom Warren <twarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: allow reading recovery mode boot typeMarcel Ziswiler2015-08-131-0/+2
| | | | | | | | | | Add defines to allow reading recovery mode (RCM) boot type from the boot information table (BIT) written by the boot ROM (BR) to the IRAM. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* gpio: omap: Drop 'method' parameterTom Rini2015-08-121-6/+1
| | | | | | | | | | The "method" parameter was part of the original port of the driver from the kernel. At some point this may have been added to allow for future differentiation (as omap1 and omap2 have different GPIO IP blocks, so this wasn't an unreasonable thing to do). At this point however it's just extra overhead, so drop. Signed-off-by: Tom Rini <trini@konsulko.com>
* gpio: am43xx: expand gpio supportNikita Kiryanov2015-08-121-0/+4
| | | | | | | | | AM43XX SoCs support up to 192 GPIO signals. Make this amount available to the driver. Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
* mmc: hi6220_dw_mmc: Add hi6220 glue code for dw_mmc controller.Peter Griffin2015-08-121-0/+8
| | | | | | | | | This patch adds the glue code for hi6220 SoC which has 2x synopsis dw_mmc controllers. This will be used by the hikey board support in subsequent patches. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
* hisilicon: hi6220: Add a hi6220 pinmux driver.Peter Griffin2015-08-122-0/+112
| | | | | | | This patch adds basic pinmux support for the hi6220 SoC, which is found on the hikey board. Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
* ARM: hi6220: Add register and bitfield definition header files.Peter Griffin2015-08-122-0/+807
| | | | | | | This patch adds the header files which will be used in the subsquent board / drivers to enable support for hi6220 hikey board. Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
* dm: gpio: hi6220: Add a hi6220 GPIO driver model driver.Peter Griffin2015-08-121-0/+29
| | | | | | | This patch adds support for the GPIO perif found on hi6220 SoC. Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
* ARM: DRA7/ OMAP5: implement Auxiliary Control Register configurationNishanth Menon2015-08-121-0/+1
| | | | | | | | | | Implement logic for ACR(Auxiliary Control Register) configuration using ROM Code smc service. Suggested-by: Richard Woodruff <r-woodruff2@ti.com> Suggested-by: Brad Griffis <bgriffis@ti.com> Reviewed-by: Brad Griffis <bgriffis@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
* Correct License and Copyright information on few filesRuchika Gupta2015-08-121-0/+2
| | | | | | | | | gpio.h - Added missing copyright in few files. rsa-mod-exp.h - Corrected copyright in the file. fsl_sec.h - Added missing license in files drivers/crypto/fsl/Makefile - Removed the incomplete GPLv2 license and replaced it with GPLv2+ license Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
* omap3: Reboot mode supportPaul Kocialkowski2015-08-121-0/+7
| | | | | | | | | | | | | | Reboot mode is written in scratchpad memory before reboot in the form of a single char, that is the first letter of the reboot mode string as passed to the reboot function. This mechanism is supported on OMAP3 both my the upstream kernel and by various TI kernels. It is up to each board to make use of this mechanism or not. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com>
* nand: lpc32xx: add SLC NAND controller supportVladimir Zapolskiy2015-08-122-0/+3
| | | | | | | | | | | | | | | | | | | | | The change adds support of LPC32xx SLC NAND controller. LPC32xx SoC has two different mutually exclusive NAND controllers to communicate with single and multiple layer chips. This simple driver allows to specify NAND chip timings and defines custom read_buf()/write_buf() operations, because access to 8-bit data register must be 32-bit aligned. Support of hardware ECC calculation is not implemented (data correction is always done by software), since it requires a working DMA engine. The driver can be included to an SPL image. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Scott Wood <scottwood@freescale.com> Tested-by: Sylvain Lemieux <slemieux@tycoint.com>
* arm: bcmcygnus: Enable Ethernet supportJiandong Zheng2015-08-121-0/+11
| | | | | | | | Enable BCM SF2 ethernet and PHY for BCM Cygnus SoC Signed-off-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Steve Rae <srae@broadcom.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
OpenPOWER on IntegriCloud