summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* powerpc/T4240QDS/eth: some fix for XFIShaohui Xie2014-08-203-18/+142
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | XFI is supported on T4QDS-XFI board, which removed slot3, and four LANEs of serdes2 are routed to a SFP+ cages, which to house fiber cable or direct attach cable(copper), the copper cable is used to emulate the 10GBASE-KR scenario. So, for XFI usage, there are two scenarios, one will use fiber cable, another will use copper cable. For fiber cable, there is NO PHY, while for copper cable, we need to use internal PHY which exist in Serdes to do auto-negotiation and link training, which implemented in kernel. We use hwconfig to define cable type for XFI, and fixup dtb based on the cable type. For copper cable, set below env in hwconfig: fsl_10gkr_copper:<10g_mac_name> the <10g_mac_name> can be fm1_10g1, fm1_10g2, fm2_10g1, fm2_10g2. The four <10g_mac_name>s do not have to be coexist in hwconfig. For XFI ports, if a given 10G port will use the copper cable for 10GBASE-KR, set the <10g_mac_name> of the port in hwconfig, otherwise, fiber cable will be assumed to be used for the port. For ex. if four XFI ports will both use copper cable, the hwconfig should contain: fsl_10gkr_copper:fm1_10g1,fm1_10g2,fm2_10g1,fm2_10g2 For fiber cable: 1. give PHY address to a XFI port, otherwise, the XFI ports will not be available in U-boot, there is no PHY physically for XFI when using fiber cable, this is just to make U-boot happy and we can use the XFI ports in U-boot. 2. fixup dtb to use fixed-link in case of fiber cable which has no PHY. Kernel requests that a MAC must have a PHY or fixed-link. When using XFI protocol, the MAC 9/10 on FM1 should init as 10G interface. Change serdes 2 protocol 56 to 55 which has same feature as 56 since 56 is not valid any longer. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* km-powerpc: define CONFIG_PRAM to protect PHRAM and PNVRAMValentin Longchamp2014-08-201-2/+3
| | | | | | | | | | | | | When u-boot initializes the RAM (early in boot) it looks for the "pram" env variable to know which is area it cannot use. If the "pram" env variable is not found, the default CONFIG_PRAM value is used. This value used to be 0 (no protection at all). This patch sets it to a value that covers PHRAM and PNVRAM that must be protected in our case. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Reviewed-by: York Sun <yorksun@freescale.com>
* driver/qe: update status of QE microcodeVijay Rai2014-08-201-1/+1
| | | | | | | This Patch updates error print for QE which should be easily understood Signed-off-by: Vijay Rai <vijay.rai@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/mpc85xx: Enabling CPC conditionally based on hwconfig optionsShaveta Leekha2014-08-201-2/+26
| | | | | | | | | | | If hwconfig does not contains "en_cpc" then by default all cpcs are enabled If this config is defined then only those individual cpcs which are defined in the subargument of "en_cpc" will be enabled e.g en_cpc:cpc1,cpc2; (this will enable cpc1 and cpc2) or en_cpc:cpc2; (this enables just cpc2) Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Sandeep Singh <Sandeep@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/t104xrdb: support deep sleep in SPI/SD bootTang Yuantian2014-08-123-9/+43
| | | | | | | | | | | | Add deep sleep support in SPI/SD boot. The destination address second stage uboot image is loaded to is changed because currently this address will be used by kernel which means we can't reserve it for resume. Entry point to kernel is still placed in second stage uboot. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/mpc85xx: Make boot flag effectiveTang Yuantian2014-08-121-0/+2
| | | | | | | | | bootflag as a parameter is passed to board_init_f(). But it is not actually used in this function. Make it effective by assigned it to gd->flags. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/t1042RDB: Add Video - HDMI supportJason Jin2014-08-123-0/+117
| | | | | | | | | | | | | | | | | | | | | | | T1042 has internal display interface unit (DIU) for driving video. T1042RDB supports video mode via -LCD using TI enconder -HDMI type interface via HDMI encoder Chrontel, CH7301C encoder which is I2C programmable is used as HDMI connector on T1042RDB. This patch add support to -enable Video interface for T1042RDB -route qixis multiplexing to enable DIU-HDMI interface on board -program DIU pixel clock gerenartor for T1042 -program HDMI encoder via I2C on board This patch refer to the upstream diu patch (337b0c52b3296f371d04aef71a833e09110e0e6b) for T1040qds. Signed-off-by: Jason Jin <Jason.Jin@freescale.com> Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> [York Sun: resolve conflict and move changes to T104xRDB.h] Reviewed-by: York Sun <yorksun@freescale.com>
* fsl/diu: ch7301 encoder split off from t1040qds/diu.cWang Dongsheng2014-08-125-126/+160
| | | | | | | | The ch7301 encoder not only used in t1040qds platform, so we split it for t1042rdb and LSx platform. Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* env_fat.c: Make sure our buffer is cache alignedTom Rini2014-08-091-2/+2
| | | | | | | We must ensure the buffer we read the env into is aligned or we may get warnings later on. Signed-off-by: Tom Rini <trini@ti.com>
* bootm: use genimg_get_kernel_addr()Bryan Wu2014-08-091-20/+5
| | | | | | | | | | | Use the new API which is originally taken out from boot_get_kernel of bootm.c Signed-off-by: Bryan Wu <pengw@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> [trini: Fix warnings with CONFIG_FIT] Signed-off-by: Tom Rini <trini@ti.com>
* pxe: detect image format before calling bootm/bootzBryan Wu2014-08-091-4/+11
| | | | | | | | | | Trying bootm for zImage will print out several error message which is not necessary for this case. So detect image format firstly, only try bootm for legacy and FIT format image then try bootz for others. This patch needs new function genimg_get_kernel_addr(). Signed-off-by: Bryan Wu <pengw@nvidia.com>
* image: introduce genimg_get_kernel_addr()Bryan Wu2014-08-092-0/+44
| | | | | | | | | | Kernel address is normally stored as a string argument of bootm or bootz. This function is taken out from boot_get_kernel() of bootm.c, which can be reused by others. Signed-off-by: Bryan Wu <pengw@nvidia.com> [trini: Fix warnings with CONFIG_FIT] Signed-off-by: Tom Rini <trini@ti.com>
* get_maintainer.pl: add support for scanning multiple MAINTAINERS filesDaniel Schwierzeck2014-08-091-24/+44
| | | | Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* get_maintainer.pl: adapt to U-Boot treeDaniel Schwierzeck2014-08-091-11/+12
| | | | | | | | | Switch core maintainer to Tom Rini. Adapt directory layout for git tree detection. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* get_maintainer.pl: import script from linux 3.15Daniel Schwierzeck2014-08-091-0/+2249
| | | | | Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* MAINTAINERS: add initial versionDaniel Schwierzeck2014-08-091-0/+405
| | | | | | | | | | MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* lib: lmb: fix overflow in __lmb_alloc_base w/ large RAMStephen Warren2014-08-091-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | If a 32-bit system has 2GB of RAM, and the base address of that RAM is 2GB, then start+size will overflow a 32-bit value (to a value of 0). __lmb_alloc_base is affected by this; it calculates the minimum of (start+size of RAM) and max_addr. However, when start+size is 0, it is always less than max_addr, which causes the value of max_addr not to be taken into account when restricting the allocation's location. Fix this by calculating start+size separately, and if that calculation underflows, using -1 (interpreted as the max unsigned value) as the value instead, and then taking the min of that and max_addr. Now that start+size doesn't overflow, it's typically large, and max_addr dominates the min() call, and is taken into account. The user-visible symptom of this bug is that CONFIG_BOOTMAP_SZ is ignored on Tegra124 systems with 2GB of RAM, which in turn causes the DT to be relocated at the very end of RAM, which the ARM Linux kernel doesn't map during early boot, and which causes boot failures. With this fix, CONFIG_BOOTMAP_SZ correctly restricts the relocated DT to a much lower address, and everything works. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* ARM: rpi_b: use new generic $bootcmdStephen Warren2014-08-091-93/+36
| | | | | | | | | | | | | | | Replace the custom $bootcmd with that from <config_distro_bootcmd.h>. There should be no functional change, since the new generic $bootcmd was derived strongly from tegra-common-post.h, after which this part of rpi_b.h was modelled. The #defines to enable/disable U-Boot commands/features were moved earlier in rpi_b.h, so they are set up before config_distro_bootcmd.h is included, since it tests whether certain features should be included based on those defines. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
* ARM: tegra: use new generic $bootcmdStephen Warren2014-08-091-130/+10
| | | | | | | | | Replace the custom $bootcmd with that from <config_distro_bootcmd.h>. There should be no functional change, since the new generic $bootcmd was derived strongly from tegra-common-post.h. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
* config: introduce a generic $bootcmdDennis Gilmore2014-08-091-0/+197
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This generic $bootcmd, and associated support macros, automatically searches a defined set of storage devices (or network protocols) for an extlinux configuration file or U-Boot boot script in various standardized locations. Distros that install such a boot config file/script in those standard locations will get easy-to-set-up booting on HW that enables this generic $bootcmd. Boards can define the set of devices from which boot is attempted, and the order in which they are attempted. Users may later customize this set/order by edting $boot_targets. Users may interrupt the boot process and boot from a specific device simply by executing e.g.: $ run bootcmd_mmc1 or: $ run bootcmd_pxe This patch was originally written by Dennis Gilmore based on Tegra and rpi_b boot scripts. I have made the following modifications since then: * Boards must define the BOOT_TARGET_DEVICES macro in order to specify the set of devices (and order) from which to attempt boot. If needed, we can define a default directly in config_distro_bootcmd.h. * Removed $env_import and related variables; nothing used them, and I think it's better for boards to pre-load an environment customization file using CONFIG_PREBOOT if they need. * Renamed a bunch of variables to suit my whims:-) Signed-off-by: Dennis Gilmore <dennis@ausil.us> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Simon Glass <sjg@chromium.org>
* rsa: Fix two errors in the implementationSimon Glass2014-08-092-2/+3
| | | | | | | | | 1. Failure to set the return code correctly 2. Failure to detect the loop end condition when the value is equal to the modulus. Reported-by: Jeroen Hofstee <jeroen@myspectrum.nl> Signed-off-by: Simon Glass <sjg@chromium.org>
* omap: clean-up dead configsMasahiro Yamada2014-08-0910-255/+3
| | | | | | | | | | | | | | The following configs are not defined at all. - CONFIG_OMAP1510 - CONFIG_OMAP_1510P1 - CONFIG_OMAP_SX1 - CONFIG_OMAP3_DMA - CONFIG_OMAP3_ZOOM2 - CONFIG_OMAP_INNOVATOR Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com>
* fdt: Sync up with libfdtSimon Glass2014-08-096-12/+163
| | | | | | | | | | | This brings in changes up to commit f9e91a48 in the libfdt repo. Mostly this is whitespace/minor changes. But there are a few new features: - fdt_size_cells() and fdt_address_cells() - fdt_resize() Signed-off-by: Simon Glass <sjg@chromium.org>
* fdt: Rename fdt_resize() to fdt_shrink_to_minimum()Simon Glass2014-08-094-4/+4
| | | | | | | Since libfdt now has an fdt_resize() function, we need to rename the U-Boot one. Signed-off-by: Simon Glass <sjg@chromium.org>
* cosmetic: update doc/README.scrapyardMasahiro Yamada2014-08-091-14/+16
| | | | | | | | | | | | | | - Add 'p1023rds' to the list since commit d0bc5140 dropped the board support but missed to update this file - Fill the Commit and Removed Date fields for boards removed by earlier commits - Move 'incaip' to keep the list sorted in reverse chronological order - Describe the soring rule in the comment block: "The list should be sorted in reverse chronological order." - Fix typos in the comment block Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* ext4load: fix help textPavel Machek2014-08-091-1/+1
| | | | | | Fix ext4load help text. Signed-off-by: Pavel Machek <pavel@denx.de>
* git-mailrc: Add myself as dm maintainerSimon Glass2014-08-091-0/+1
| | | | | | Add a subsystem entry for dm with myself as maintainer. Signed-off-by: Simon Glass <sjg@chromium.org>
* git-mailrc: Change fdt maintainerSimon Glass2014-08-091-1/+1
| | | | | | Add myself as fdt maintainer. Signed-off-by: Simon Glass <sjg@chromium.org>
* net: BOOTP retry timeout improvementsStephen Warren2014-08-093-11/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the BOOTP code sends out its initial request as soon as the Ethernet driver indicates "link up". If this packet is lost or not replied to for some reason, the code waits for a 1s timeout before retrying. For some reason, such early packets are often lost on my system, so this causes an annoying delay. To optimize this, modify the BOOTP code to have very short timeouts for the first packet transmitted, but gradually increase the timeout each time a timeout occurs. This way, if the first packet is lost, the second packet is transmitted quite quickly and hence the overall delay is low. However, if there's still no response, we don't keep spewing out packets at an insane speed. It's arguably more correct to try and find out why the first packet is lost. However, it seems to disappear inside my Ethenet chip; the TX chip indicates no error during TX (not that it has much in the way of reporting...), yet wireshark on the RX side doesn't see any packet. FWIW, I'm using an ASIX USB Ethernet adapter. Perhaps "link up" is reported too early or based on the wrong condition in HW, and we should add some fixed extra delay into the driver. However, this would slow down every link up event even if it ends up not being needed in some cases. Having BOOTP retry quickly applies the fix/WAR to every possible Ethernet device, and is quite simple to implement, so seems a better solution. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* emif.h: remove duplicated argument to |maxin.john@enea.com2014-08-091-3/+0
| | | | | | | Remove the duplicated argument to | in two places. Reported by Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: Maxin B. John <maxin.john@enea.com>
* vitesse: remove duplicated argument to ||maxin.john@enea.com2014-08-091-1/+0
| | | | | | Remove the duplicated argument to || check Signed-off-by: Maxin B. John <maxin.john@enea.com>
* board_r: Add missing return to initr_docIan Campbell2014-08-091-0/+1
| | | | | | | | I happened to spot this while working in the area. Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Simon Glass <sjg@chromium.org> Cc: Simon Glass <sjg@chromium.org>
* Makefile: use u-boot.map for binary_size_checkChris Packham2014-08-091-3/+4
| | | | | u-boot.map is generated automatically by the compiler and more importantly can handle addresses >4GB.
* Makefile: use $(shell ...) for determining file_sizeChris Packham2014-08-091-1/+1
| | | | | | | | | | | | | | file_size was being calculated using back-ticks but map_size uses $(shell ...). Update the file_size calculation to use $(shell ...). From: Jeroen Hofstee <jeroen@myspectrum.nl> The binary_size_check target relies on stat -c %s to return the size of u-boot.bin. This only works with GNU stat though. Use wc instead. Signed-off-by: Chris Packham <judge.packham@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* pxe: clear Bootfile before returningStephen Warren2014-08-091-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When "pxe boot" downloads the initrd/kernel/DTB, netboot_common() saves the downloaded filename to global variable BootFile. If the boot operation is aborted, this global state is not cleared. If "dhcp" is executed later without any arguments, BootFile is not cleared, and when the DHCP response is received, BootpCopyNetParams() writes the value into environment variable bootfile. This causes the following scenario: * Boot script executes dhcp; pxe get; pxe boot * User CTRL-C's the PXE menu, which causes the first menu item to be booted, which causes some file to be downloaded. (This boot-on-CTRL-C behaviour is arguably a bug too, but it's a separate bug and the bug this patch fixes would still exist if the user simply waited to press CTRL-C until "pxe boot" started downloading files) * User CTRL-C's the file downloads, but the filename is still written to the bootfile environment variable. * User re-runs the boot command, which in my case executes "dhcp; pxe get; pxe boot" again, and "dhcp" picks up the saved bootfile environment variable and proceeds to download a file that it shouldn't. To solve this, modify the implementation of "pxe get" to clear BootFile if the whole boot operation fails, which avoids this whole mess. An alternative would be to modify netboot_common() such that the no- arguments case explicitly clears the global variable BootFile. However, that would prevent the following command sequences from working: $ dhcp filename # downloads "filename" $ dhcp # downloads $bootfile, i.e. "filename" or: $ setenv bootfile filename $ dhcp # downloads $bootfile, i.e. "filename" ... and I assume someone relies on U-Boot working that way. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* doc: README.android-fastboot: Add note about vendor IDBarnes, Clifton A2014-08-091-0/+4
| | | | | | | | | | The Android fastboot client only communicates with specific vendor IDs. This addition to the documentation points out that fact so everyone is aware that not just any vendor ID will work and where to find the IDs that will. Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com> Cc: Rob Herring <robh@kernel.org>
* ext4: trats: trats2: Modify dfu_alt_info's file names to have absolute pathŁukasz Majewski2014-08-092-6/+6
| | | | | | | After the clean up performed in the commit 1151b7ac10b81ecbb the DFU subsystem requires absolute patch for correct operation. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* Implement generalised RSA public exponents for verified bootMichael van der Westhuizen2014-08-095-10/+158
| | | | | | | | | | | | | | | | | | | | | | | | Remove the verified boot limitation that only allows a single RSA public exponent of 65537 (F4). This change allows use with existing PKI infrastructure and has been tested with HSM-based PKI. Change the configuration OF tree format to store the RSA public exponent as a 64 bit integer and implement backward compatibility for verified boot configuration trees without this extra field. Parameterise vboot_test.sh to test different public exponents. Mathematics and other hard work by Andrew Bott. Tested with the following public exponents: 3, 5, 17, 257, 39981, 50457, 65537 and 4294967297. Signed-off-by: Andrew Bott <Andrew.Bott@ipaccess.com> Signed-off-by: Andrew Wishart <Andrew.Wishart@ipaccess.com> Signed-off-by: Neil Piercy <Neil.Piercy@ipaccess.com> Signed-off-by: Michael van der Westhuizen <michael@smart-africa.com> Cc: Simon Glass <sjg@chromium.org>
* serial: sh: Add support External Clock modeNobuhiro Iwamatsu2014-08-092-3/+9
| | | | | | | | | R8A7780 and R7A7791 of rmobile supports External Clock mode, and these uses different from Internal Clock mode registers and calculations to the baud rate setting. This adds function for External Clock mode. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* serial: sh: Add support DL and CKS register for R8A7794Nobuhiro Iwamatsu2014-08-091-1/+2
| | | | | | | | R8A7794 has DL and CKS register, and these registers are used in external clock mode. This adds support these for R8A7794. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* usb: ehci: rmobile: Remove xHCI addressNobuhiro Iwamatsu2014-08-093-5/+2
| | | | | | | | echi-rmobile does not support xHCI. This removes xHCI address from address table. And this revise a value of CONFIG_USB_MAX_CONTROLLER_COUNT for lager board and koelsh board. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
* usb: ehci: rmobile: Add support R8A7794Nobuhiro Iwamatsu2014-08-091-0/+6
| | | | | | | R8A7794 has same IP of USB controller as R8A7790 and R8A7791. This addes support for R8A7794. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
* dfu: fix readback buffer overflow testStephen Warren2014-08-091-1/+1
| | | | | | | The buffer is too small if it's < size to read, not if it's <= the size. This fixes the 1MB test case on Tegra, which has a 1MB buffer. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* test: dfu: add some more test casesStephen Warren2014-08-091-1/+1
| | | | | | | | On Tegra, the DFU buffer size is 1M. Consequently, the 8M test always fails. Add tests for the 1M size, and one byte less as a corner case, so that some large tests are executed and expected to pass. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* test: dfu: cleanup before executionStephen Warren2014-08-091-0/+1
| | | | | | | | | Call cleanup() before running tests too. If a previous test was CTRL-C'd some stale files may have been left around. dfu-util refuses to receive a file to a filename that already exists, which results in false test failures if the files aren't cleaned up first. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* thor: defer parsing of device string to IO backendLukasz Majewski2014-08-091-3/+3
| | | | | | | | | | | | | Commit d4f5ef59cc7 "dfu: defer parsing of device string to IO backend" changed the function signature of dfu_init_env_entities(). Adjust cmd_thordown.c to match that change. Also, apply the same change as commit d6d37d737b58e "dfu: free entities when parsing fails" to cmd_thordown.c. Fixes: d4f5ef59cc7 ("dfu: defer parsing of device string to IO backend") Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* test:dfu: README file updateLukasz Majewski2014-08-091-3/+8
| | | | Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* test: dfu: script enhancementsStephen Warren2014-08-093-26/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Various misc enhancements to dfu_gadget_test.sh: * After every write (download), perform a write to a different file with different data. This ensures that the DFU buffer's content is replaced, so that if the read (upload) succeeds, we know that the correct data was actually read from the storage device, rather than simply being left over in the DFU buffer. This requires two alt setting names to be passed to the script, and a dummy data file to be generated by dfu_gadget_test_init.sh. * Fix the assumption that dfu_gadget_test.sh is run from the directory that contains it, by cd'ing to that directory before invoking ./dfu_gadget_test_init.sh. * Use $DIR$RCV_DIR consistently, rather than using plain $RCV_DIR in some places. * Add 959, 961 test file sizes, to be consistent with having one more than and one less than all the other "round" sizes 64, 128, and 4096. * Remove references to $BKP_DIR from dfu_gadget_test_init.sh, since it isn't used. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* test:dfu: Add test scripts for testing DFU regressionLukasz Majewski2014-08-093-0/+152
| | | | | | | | | | This commit adds test scripts for testing if any commit has introduced regression to the DFU subsystem. It uses md5 to test if sent and received file is correct. The test detailed description is available at README file. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* dfu: add SF backendStephen Warren2014-08-094-0/+165
| | | | | | This allows SPI Flash to be programmed using DFU. Signed-off-by: Stephen Warren <swarren@nvidia.com>
OpenPOWER on IntegriCloud