summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* siemens: update DDR3 parameters for dxr2Egli, Samuel2014-05-132-23/+42
| | | | | | | | | | | | * add parameters for factory and print them at start up to facilitate control of right DDR3 settings in EEPROM. * cosmetic changes in a couple of printfs Signed-off-by: Samuel Egli <samuel.egli@siemens.com> Cc: Roger Meier <r.meier@siemens.com> Cc: Heiko Schocher <hs@denx.de> Cc: Wolfgang Denk <wd@denx.de>
* siemens: cosmetic: remove unused and rename definesEgli, Samuel2014-05-133-7/+6
| | | | | | | | | | | | For dxr2 board DXR2_IOCTRL_VAL is set by data in EEPROM. In pxm2 board it does not make sense to have dxr2 as prefix. Replace it with more meaningful DDR prefix. Signed-off-by: Samuel Egli <samuel.egli@siemens.com> Cc: Pascal Bach <pascal.bach@siemens.com> Cc: Roger Meier <r.meier@siemens.com> Cc: Heiko Schocher <hs@denx.de> Cc: Wolfgang Denk <wd@denx.de>
* am33xx: add SSC enable macroYegor Yefremov2014-05-132-1/+3
| | | | Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
* config: k2hk_evm: Add generic board supportKhoronzhuk, Ivan2014-05-131-0/+1
| | | | | | | We should use generic board in order the ARM maintainer be able to remove arch/arm/lib/board.c Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* Merge branch 'u-boot/master'Albert ARIBAUD2014-05-09443-38607/+9772
|\ | | | | | | | | | | | | Conflicts: drivers/net/Makefile (trivial merge)
| * Merge branch 'serial' of git://www.denx.de/git/u-boot-microblazeTom Rini2014-05-062-11/+11
| |\
| | * serial: zynq: Fix typo in suffix function nameMichal Simek2014-05-062-3/+3
| | | | | | | | | | | | | | | | | | | | | 's/zynq_serial_initalize/zynq_serial_initialize/g' serial_initialize is used by all serial drivers. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| | * serial: zynq: Remove sparse warningsMichal Simek2014-05-061-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Warnings: drivers/serial/serial_zynq.c:181:1: warning: symbol 'uart_zynq0_init' was not declared. Should it be static? drivers/serial/serial_zynq.c:181:1: warning: symbol 'uart_zynq0_setbrg' was not declared. Should it be static? drivers/serial/serial_zynq.c:181:1: warning: symbol 'uart_zynq0_getc' was not declared. Should it be static? drivers/serial/serial_zynq.c:181:1: warning: symbol 'uart_zynq0_tstc' was not declared. Should it be static? drivers/serial/serial_zynq.c:181:1: warning: symbol 'uart_zynq0_putc' was not declared. Should it be static? drivers/serial/serial_zynq.c:181:1: warning: symbol 'uart_zynq0_puts' was not declared. Should it be static? drivers/serial/serial_zynq.c:182:22: warning: symbol 'uart_zynq_serial0_device' was not declared. Should it be static? drivers/serial/serial_zynq.c:184:1: warning: symbol 'uart_zynq1_init' was not declared. Should it be static? drivers/serial/serial_zynq.c:184:1: warning: symbol 'uart_zynq1_setbrg' was not declared. Should it be static? drivers/serial/serial_zynq.c:184:1: warning: symbol 'uart_zynq1_getc' was not declared. Should it be static? drivers/serial/serial_zynq.c:184:1: warning: symbol 'uart_zynq1_tstc' was not declared. Should it be static? drivers/serial/serial_zynq.c:184:1: warning: symbol 'uart_zynq1_putc' was not declared. Should it be static? drivers/serial/serial_zynq.c:184:1: warning: symbol 'uart_zynq1_puts' was not declared. Should it be static? drivers/serial/serial_zynq.c:185:22: warning: symbol 'uart_zynq_serial1_device' was not declared. Should it be static? Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | Merge branch 'master' of git://www.denx.de/git/u-boot-microblazeTom Rini2014-05-061-1/+1
| |\ \
| | * | microblaze: Wire up OF support for emacliteStephan Linz2014-05-061-1/+1
| | |/ | | | | | | | | | | | | | | | | | | | | | - expand the condition with CONFIG_OF_CONTROL Signed-off-by: Stephan Linz <linz@li-pro.net> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | Merge branch 'net' of git://www.denx.de/git/u-boot-microblazeTom Rini2014-05-061-1/+3
| |\ \
| | * | net: zynq: Fix sparse warnings in gemMichal Simek2014-05-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add missing header. Warnings: drivers/net/zynq_gem.c:491:5: warning: symbol 'zynq_gem_initialize' was not declared. Should it be static? drivers/net/zynq_gem.c:542:5: warning: symbol 'zynq_gem_of_init' was not declared. Should it be static? Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| | * | net: zynq: Use predefined macros instead of hardcoded valueMichal Simek2014-05-061-1/+2
| | |/ | | | | | | | | | | | | | | | MII is used by this driver. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2014-05-0640-230/+597
| |\ \ | | |/ | |/|
| | * common: fixed linker-list exampleMateusz Zalega2014-05-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Last argument shouldn't be there. Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Acked-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@ti.com>
| | * USB: gadget: save driver name before registering itStephen Warren2014-05-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | g_dnl_register() currently first attempts to register a composite driver by name, and then saves the driver name once it's registered. Internally to the registration code, g_dnl_do_config() is called and attempts to compare the composite device's name with the list of known device names. This fails since the composite device's name has not yet been stored. This means that the first time "ums 0 0" is run, it fails, but subsequent attempts succeed. Re-order the name-saving and registration code to solve this. Fixes: e5b834e07f51 ("USB: gadget: added a saner gadget downloader registration API") Signed-off-by: Stephen Warren <swarren@nvidia.com>
| | * USB: gadget: added a saner gadget downloader registration APIMateusz Zalega2014-05-0511-64/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Preprocessor definitions and hardcoded implementation selection in g_dnl core were replaced by a linker list made of (usb_function_name, bind_callback) pairs. Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Marek Vasut <marex@denx.de>
| | * am335x: dfu: disable DFU in am335x_evm SPL buildMateusz Zalega2014-05-051-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Future patches will make DFU too large to fit in this board's SPL build. Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Acked-by: Tom Rini <trini@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
| | * ums: always initialize mmc before ums_disk_init()Mateusz Zalega2014-05-051-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In cases when MMC hadn't been initialized before, ie. by the user or other subsystem, it was still uninitialized while UMS media capacity check, leading to broken ums command. UMS has to initialize resources it uses. Tested on Samsung Goni. Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Tested-by: Mateusz Zalega <m.zalega@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
| | * dfu: mmc: change offset base handlingMateusz Zalega2014-05-054-10/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously offsets handled by dfu_fill_entity_mmc(), defined in boards' CONFIG_DFU_ALT were treated as hexadecimal regardless of their prefix, which sometimes led to confusion. This patch forces usage of explicit numerical base prefixes. Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Tom Rini <trini@ti.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
| | * dfu: mmc: raw data write fixMateusz Zalega2014-05-052-45/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When user attempted to perform a raw write using DFU (vide dfu_fill_entity_mmc) with MMC interface not initialized before, get_mmc_blk_size() reported invalid (zero) block size - it wasn't possible to write ie. a new u-boot image. This commit fixes that by initializing MMC device before use in dfu_fill_entity_mmc(). While fixing initialization sequence, I had to change about half of dfu_fill_entity_mmc's body, so I refactored it on the way to make it, IMHO, considerably more comprehensible. Being left as dead code, get_mmc_blk_size() was removed. Tested on Samsung Goni. Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Tom Rini <trini@ti.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
| | * usb: dfu: fix boards wo USB cable detectionMateusz Zalega2014-05-0511-44/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Former usb_cable_connected() patch broke compilation of boards which do not support this feature. I've renamed usb_cable_connected() to g_dnl_usb_cable_connected() and added its default implementation to gadget downloader driver code. There's only one driver of this kind and it's unlikely there'll be another, so there's no point in keeping it in /common. Previously this function was declared in usb.h. I've moved it, since it's more appropriate to keep it in g_dnl.h - usb.h seems to be intended for USB host implementation. Existing code, confronted with default -EOPNOTSUPP return value, continues as if the cable was connected. CONFIG_USB_CABLE_CHECK was removed. Change-Id: Ib9198621adee2811b391c64512f14646cefd0369 Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
| | * part: header fixMateusz Zalega2014-05-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implementation made use of types defined in common.h, even though it wasn't #included. It worked in circumstances when .c files included every needed header (all). Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Cc: Tom Rini <trini@ti.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
| | * mmc: mmc header fixMateusz Zalega2014-05-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Structure definition used type block_dev_desc_t, defined in part.h, which wasn't included in mmc.h. It worked only in circumstances when common.h, or another header using part.h was incuded in implementation files. Change-Id: I5b203928b689887e3e78beb00a378955e0553eb7 Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
| | * usb: gadget: allow ci_udc to build with new gadget frameworkStephen Warren2014-05-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow ci_udc.o to be built when using the new(?) USB gadget framework, as enabled by CONFIG_USB_GADGET. Note that this duplicates the Makefile entry for ci_udc.o, since it's also included inside #ifdef CONFIG_USB_ETHER. I'm not sure what that define means; perhaps an old style of Ethernet-specific USB gadget implementation? I wonder if the line that this patch adds shouldn't be outside all of the ifdefs, so it stands on its own, similar to how e.g. epautoconf.o is shared between the two? Signed-off-by: Stephen Warren <swarren@nvidia.com>
| | * usb: ums: use only 1 buffer for CI_UDCStephen Warren2014-04-301-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ci_udc.c allocates only a single buffer for each endpoint, which ci_ep_alloc_request() returns as a hard-coded value rather than dynamically allocating. Consequently, storage_common.c must limit itself to using a single buffer at a time. Add a special case to the definition of FSG_NUM_BUFFERS for this. Another option would be to fix ci_ep_alloc_request() to dynamically allocate the buffers like some/all(?) other device mode drivers do. However, I don't think that ci_ep_queue() supports queueing up multiple buffers either yet, and I'm not familiar enough with the controller yet to implement that. As such, any attempt to use multiple buffers simply results in data corruption and other errors. Signed-off-by: Stephen Warren <swarren@nvidia.com>
| | * usb: ci_udc: support variants with hostpc registerStephen Warren2014-04-302-18/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tegra's USB controller appears to be a variant of the ChipIdea controller; perhaps derived from it, or simply a different version of the IP core to what U-Boot supports today. In this variant, at least the following difference are present: - Some registers are moved about. - Setup transaction completion is reported in a separate 'epsetupstat' register, rather than in 'epstat' (which still exists, perhaps for other transaction types). - USB connection speed is reported in a separate 'hostpc1_devlc' register, rather than 'portsc'. - The registers used by ci_udc.c begin at offset 0x130 from the USB register base, rather than offset 0x140. However, this is handled by the associated EHCI controller driver, since the register address is stored in controller.ctrl->hcor. Introduce define CONFIG_CI_UDC_HAS_HOSTPC to indicate which variant of the controller should be supported. The "HAS_HOSTPC" part of this name mirrors the similar "has_hostpc" field used by the Linux EHCI controller core to represent the presence/absence of the hostpc1_devlc register. Signed-off-by: Stephen Warren <swarren@nvidia.com>
| | * usb: ci_udc: make PHY initialization conditionalStephen Warren2014-04-301-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | usb_gadget_register_driver() currently unconditionally programs PORTSC to select a ULPI PHY. This is incorrect on at least the Tegra boards I am testing with, which use a UTMI PHY for the OTG ports. Make the PHY selection code conditional upon the specific EHCI controller that is in use. Ideally, I believe that the PHY initialization code should be part of ehci_hcd_init() in the relevant EHCI controller driver, or some board- specific function that ehci_hcd_init() calls. For MX6, I'm not sure this PHY initialization code is correct even before this patch, since ehci-mx6's ehci_hcd_init() already configures PORTSC to a board-specific value, and it seems likely that the code in ci_udc.c is incorrectly undoing this. Perhaps this is not an issue if the PHY selection register bits aren't implemented on this instance of the MX6 USB controller? ehci-mxs.c doens't appear to touch PORTSC, so this code is likely still required there. Signed-off-by: Stephen Warren <swarren@nvidia.com>
| | * usb: ci_udc: set ep->req.actual after transferStephen Warren2014-04-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At least drivers/usb/gadget/storage_common.c expects that ep->req.actual contain the number of bytes actually transferred. (At least in practice, I observed it failing to work correctly unless this was the case). However, ci_udc.c modifies ep->req.length instead. I assume that .length is supposed to represent the allocated buffer size, whereas .actual is supposed to represent the actual number of bytes transferred. In the OUT transaction case, this may happen simply because the host sends a smaller packet than the max possible size, which is quite legal. In the IN case, transferring fewer bytes than requested could presumably happen as an error. Modify handle_ep_complete() to write to .actual rather than modifying .length. Signed-off-by: Stephen Warren <swarren@nvidia.com>
| | * usb: ci_udc: Support larger packetsStephen Warren2014-04-301-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ci_ep_queue() currently only fills in the page0/page1 fields in the queue item. If the buffer is larger than 4KiB (unaligned) or 8KiB (page-aligned), then this prevents the HW from knowing where to write the balance of the data. Fix this by initializing all 5 pageN pointers, which allows up to 16KiB (potentially non-page-aligned) buffers. Signed-off-by: Stephen Warren <swarren@nvidia.com>
| | * dfu:fix: Replace wrong return value with proper oneLukasz Majewski2014-04-301-1/+1
| | | | | | | | | | | | | | | | | | | | | This patch remove always false (since we tested ret = 0) ternary operator with ret value returned. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
| | * exynos: usb: Fix data abort on boards w/o vbus-gpio node in the DTandrey.konovalov@linaro.org2014-04-302-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 4a271cb1b4ff doesn't take into account that fdtdec_setup_gpio() returns success when the gpio passed to it is FDT_GPIO_NONE (no gpio node found in the fdtdec_decode_gpio() call). This results in calling gpio_direction_output() on invalid gpio. For this reason executing "usb start" command on Arndale causes data abort in the ehci-exynos driver. Add the fdt_gpio_isvalid() check to fix that problem. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Cc: Julius Werner <jwerner@chromium.org> Cc: Simon Glass <sjg@chromium.org> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Marek Vasut <marex@denx.de>
| | * usb: musb: fill in usb_gadget_unregister_driverRob Herring2014-04-301-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | Add missing missing disconnect and unbind calls to the musb gadget driver's usb_gadget_unregister_driver function. Otherwise, any gadget drivers fail to uninitialize and run a 2nd time. Signed-off-by: Rob Herring <robh@kernel.org>
| | * usb: handle NULL table in usb_gadget_get_stringRob Herring2014-04-301-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow a NULL table to be passed to usb_gadget_get_string for cases when a string table may not be populated. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Tom Rini <trini@ti.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
| | * usb:gadget:f_thor: fix write to filesystem by add dfu_flush()Przemyslaw Marczak2014-04-301-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since dfu read/write operations needs to be flushed manually, writing to filesystem on MMC by thor was broken. MMC raw write actually is working fine because current dfu_flush() function writes filesystem only. This commit adds dfu_flush() to f_thor and now filesystem write is working. This change was tested on Trats2 board. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com>
| | * usb:gadget:f_thor: code cleanup in function download_tail()Przemyslaw Marczak2014-04-301-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In thor's download_tail() function, dfu_get_entity() is called before each dfu_write() call and the returned entity pointers are the same. So dfu_get_entity() can be called just once and this patch changes this. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com>
| | * usb: Fix USB keyboard polling via control endpointAdrian Cox2014-04-301-11/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USB keyboard polling failed for some keyboards on PowerPC 5020. This was caused by requesting only 4 bytes of data from keyboards that produce an 8 byte HID report. Signed-off-by: Adrian Cox <adrian@humboldt.co.uk> Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Marek Vasut <marex@denx.de>
| | * usb: Add endian support macros to interrupt transfers in the EHCI driver.Adrian Cox2014-04-301-25/+31
| | | | | | | | | | | | | | | | | | Update the EHCI driver to support interrupt transfers on PowerPC. Signed-off-by: Adrian Cox <adrian@humboldt.co.uk>
| | * usb: ehci: rmobile: Add support ehci host driver of rmobile SoCsNobuhiro Iwamatsu2014-04-303-0/+278
| | | | | | | | | | | | | | | | | | | | | | | | The rmobile SoC has usb host controller. This supports USB controllers listed in the R8A7790, R8A7791 and R8A7740. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Reviewed-by: Marek Vasut <marex@denx.de>
| * | Merge branch 'next' of git://git.denx.de/u-boot-shTom Rini2014-05-021-96/+0
| |\ \ | | |/ | |/|
| | * sh: delete an unused source fileMasahiro Yamada2014-04-301-96/+0
| | | | | | | | | | | | | | | | | | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | drivers/i2c/fsl_i2c: modify i2c_read to handle multi-byte writeShaveta Leekha2014-04-291-7/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most of the I2C slaves support accesses in the typical style that is : read/write series of bytes at particular address offset. These transactions look like:" (1) START:Address:Tx:Offset:RESTART:Address[0..4]:Tx/Rx:data[0..n]:STOP" However there are certain devices which support accesses in terms of the transactions as follows: (2) "START:Address:Tx:Txdata[0..n1]:Clock_stretching: RESTART:Address:Rx:data[0..n2]" Here Txdata is typically a command and some associated data, similarly Rxdata could be command status plus some data received as a response to the command sent. Type (1) transactions are currently supportd in the i2c driver using i2c_read and i2c_write APIs. I2C EEPROMs, RTC, etc fall in this category. To handle type (2) along with type (1) transactions, i2c_read() function has been modified. Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
| * | driver/mxc_i2c: Move static data structure to global_dataYork Sun2014-04-292-10/+11
| |/ | | | | | | | | | | | | | | | | This driver needs a data structure in SRAM before SDRAM is available. This is not alway the case using .data section. Moving this data structure to global_data guarantees it is writable. Signed-off-by: York Sun <yorksun@freescale.com> CC: Troy Kisky <troy.kisky@boundarydevices.com>
| * Merge branch 'master' of git://www.denx.de/git/u-boot-arcTom Rini2014-04-251-3/+3
| |\
| | * axs101: bump DDR size from 256 to 512 MbAlexey Brodkin2014-04-251-2/+2
| | | | | | | | | | | | Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
| | * axs101: increase EEPROM page write delay from 32 to 64 msecAlexey Brodkin2014-04-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | With 32 milliseconds delay on some boards EEMPROM got written inconsistently. With 64 msec all of our existig boards show properly written EEPROM. Cc: Tom Rini <trini@ti.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
| * | Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xxTom Rini2014-04-251-64/+101
| |\ \
| | * | ppc4xx: add support for new PMC440 revision with cleanupMatthias Fuchs2014-04-241-64/+101
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the new PMC440 hardware revision 1.4. The board now uses Micrel KSZ9031 phys. Add missing i2c initialization before reading bootstrap eeprom. Fix a couple of coding style issues. Make local functions static. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
| * | Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxTom Rini2014-04-258-4/+813
| |\ \
| | * | mpc83xx: add ids8313 supportHeiko Schocher2014-04-234-0/+807
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | add support for the ids8313 board. CPU: e300c3, MPC8313, Rev: 2.1 at 396 MHz, CSB: 132 MHz I2C: ready SPI: ready DRAM: 128 MiB (DDR2, 32-bit, ECC off, 264 MHz) Flash: 8 MiB NAND: 128 MiB Net: TSEC0, TSEC1 [PRIME] public key on NOR flash start Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
OpenPOWER on IntegriCloud