summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* mpc83xx: Fix config of Arbiter, System Priority, and Clock ModeKumar Gala2007-03-025-46/+30
| | | | | | | | | | | | | | | | | | | | | | | | | The config value for: * CFG_ACR_PIPE_DEP * CFG_ACR_RPTCNT * CFG_SPCR_TSEC1EP * CFG_SPCR_TSEC2EP * CFG_SCCR_TSEC1CM * CFG_SCCR_TSEC2CM Were not being used when setting the appropriate register Added: * CFG_SCCR_USBMPHCM * CFG_SCCR_USBDRCM * CFG_SCCR_PCICM * CFG_SCCR_ENCCM To allow full config of the SCCR. Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349 that were just bogus. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* mpc83xx: update [local-]mac-address properties on UEC based devicesKim Phillips2007-03-023-0/+42
| | | | | | | 8360 and 832x weren't updating their [local-]mac-address properties. This patch fixes that. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: write MAC address to mac-address and local-mac-addressTimur Tabi2007-03-021-0/+8
| | | | | | | | | Some device trees have a mac-address property, some have local-mac-address, and some have both. To support all of these device trees, this patch updates ftp_cpu_setup() to write the MAC address to mac-address if it exists. This function already updates local-mac-address. Signed-off-by: Timur Tabi <timur@freescale.com>
* mpc83xx: add command line editing by defaultKim Phillips2007-03-024-0/+4
|
* mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffersKim Phillips2007-03-021-1/+8
| | | | | | | | | | Disable G1TXCLK, G2TXCLK h/w buffers. This patch fixes a networking timeout issue with MPC8360EA (Rev.2) PBs. Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com>
* mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xxXie Xiaobo2007-03-023-62/+354
| | | | | | | The code supply fixed and SPD initialization for MPC83xx DDR2 Controller. it pass DDR/DDR2 compliance tests. Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
* mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDSXie Xiaobo2007-03-023-4/+33
| | | | | | | MPC8360E rev2.0 have new spridr,and PVR value, The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM. Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
* mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDSXie Xiaobo2007-03-023-13/+61
| | | | | | | MPC8349E rev3.1 have new spridr,and PVR value, The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM. Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>
* mpc83xx: Fix empty i2c reads/writes in fsl_i2c.cJoakim Tjernlund2007-03-021-13/+14
| | | | | | | | | | | | | Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0) which is used to se if an slave will ACK after receiving its address. Correct i2c probing to use this method as the old method could upset a slave as it wrote a data byte to it. Add a small delay in i2c_init() to let the controller shutdown any ongoing I2C activity. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
* mpc83xx: Add support for the MPC8349E-mITX-GPTimur Tabi2007-03-028-288/+447
| | | | | | | | Add support for the MPC8349E-mITX-GP, a stripped-down version of the MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in HRCW is 0) for the ITX and a README for the ITX and the ITX-GP. Signed-off-by: Timur Tabi <timur@freescale.com>
* mpc83xx: Delete sdram_init() for MPC8349E-mITXTimur Tabi2007-03-021-87/+1
| | | | | | | There is no SDRAM on any of the 8349 ITX variants, so function sdram_init() never does anything. This patch deletes it. Signed-off-by: Timur Tabi <timur@freescale.com>
* mpc83xx: Fix the LAW1/3 bugDave Liu2007-03-021-3/+3
| | | | | | | | | | | The patch solves the alignment problem of the local bus access windows to render accessible the memory bank and PHY registers of UPC 1 (starting at 0xf801 0000). What we actually did was to adjust the sizes of the bus access windows so that the base address alignment requirement would be met. Signed-off-by: Chereji Marian <marian.chereji@freescale.com> Signed-off-by: Gridish Shlomi <gridish@freescale.com> Signed-off-by: Dave Liu <daveliu@freescale.com>
* mpc83xx: don't hang if watchdog configured on 8360, 832xKim Phillips2007-03-021-4/+0
| | | | | | | don't hang if watchdog configured on 8360, 832x The watchdog programming model is the same across all 83xx devices; make the code reflect that.
* mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dtKim Phillips2007-03-021-0/+2
| | | | protect memcpy to bad address if a local-mac-address is missing from dt
* mpc83xx: make 8360 default environment fdt be 8360 (not 8349)Kim Phillips2007-03-021-1/+1
| | | | make 8360 default environment fdt be 8360 (not 8349)
* mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UECEmilian Medve2007-03-021-1/+1
| | | | | | | | The problem is not gcc4 but the code itself. The BD_STATUS() macro can't be used for busy-waiting since it strips the 'volatile' property from the bd variable. gcc3 was working by pure luck. This is a follow on patch to "Fix the UEC driver bug of QE"
* mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X insteadKumar Gala2007-03-025-15/+15
| | | | | | | | The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all MPC834X class processors. Change the protections from CONFIG_MPC8349 to CONFIG_MPC834X so they are more generic. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALLKim Phillips2007-03-021-1/+2
|
* mpc83xx: sort Makefile targetsKim Phillips2007-03-021-19/+20
| | | | reordered targets alphabetically
* mpc83xx: U-Boot support for Wind River SBC8349Paul Gortmaker2007-03-0212-0/+2077
| | | | | | | | | | | | | | | | | | | | | | | I've redone the SBC8349 support to match git-current, which incorporates all the MPC834x updates from Freescale since the 1.1.6 release, including the DDR changes. I've kept all the SBC8349 files as parallel as possible to the MPC8349EMDS ones for ease of maintenance and to allow for easy inspection of what was changed to support this board. Hence the SBC8349 U-Boot has FDT support and everything else that the MPC8349EMDS has. Fortunately the Freescale updates added support for boards using CS0, but I had to change spd_sdram.c to allow for board specific settings for the sdram_clk_cntl (it is/was hard coded to zero, and that remains the default if the board doesn't specify a value.) Hopefully this should be mergeable as-is and require no whitespace cleanups or similar, but if something doesn't measure up then let me know and I'll fix it. Thanks, Paul.
* mpc83xx: Remove a redundant semicolon in mpc8349itx.cSam Song2007-03-021-1/+1
| | | | | | | A redundant semicolon existed in mpc8349itx.c should be removed. Signed-off-by: Sam Song <samsongshu@yahoo.com.cn>
* mpc83xx: Put the version (and magic) after the HRCW.Jerry Van Baren2007-03-021-12/+16
| | | | | | | Put the version (and magic) after the HRCW. This puts it in a fixed location in flash, not at the start of flash but as close as we can get. Signed-off-by: Jerry Van Baren <vanbaren@cideas.com>
* mpc83xx: Add the MPC832XEMDS board readmeDave Liu2007-03-021-0/+129
| | | | | | Add the MPC832XEMDS board readme Signed-off-by: Dave Liu <daveliu@freescale.com>
* mpc83xx: Add support for the MPC832XEMDS boardDave Liu2007-03-0216-32/+1488
| | | | | | This patch supports DUART, ETH3/4 and PCI etc. Signed-off-by: Dave Liu <daveliu@freescale.com>
* mpc83xx: streamline the 83xx immr head fileDave Liu2007-03-026-2061/+1122
| | | | | | | | | | | | | | | | For better format and style, I streamlined the 83xx head files, including immap_83xx.h and mpc83xx.h. In the old head files, 1) duplicated macro definition appear in the both files; 2) the structure of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The macro definition put inside the each structure. So, I cleaned up the structure of QE immr from immap_83xx.h, deleted the duplicated stuff and moved the macro definition to mpc83xx.h, Just like MPC8260. CHANGELOG *streamline the 83xx immr head file Signed-off-by: Dave Liu <daveliu@freescale.com>
* mpc83xx: Fix the UEC driver bug of QEDave Liu2007-03-021-8/+6
| | | | | | | | | | | | | | The patch prevents the GCC tool chain from striping useful code for optimization. It will make UEC ethernet driver workable, Otherwise the UEC will fail in tx when you are using gcc4.x. but the driver can work when using gcc3.4.3. CHANGELOG *Prevent the GCC from striping code for optimization, Otherwise the UEC will tx failed when you are using gcc4.x. Signed-off-by: Dave Liu <daveliu@freescale.com>
* Merge with git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx-merge-srStefan Roese2007-03-012-6/+8
|\
| * Merge with /home/sr/git/u-boot/denxStefan Roese2007-03-012-6/+8
| |\
| | * SC3: fix typo in default environmentWolfgang Denk2007-02-281-1/+1
| | |
| | * MCC200: Fixes for update procedureSergei Poselenov2007-02-281-5/+7
| | | | | | | | | | | | | | | | | | - fix logic error in image type handling - make sure file system images (cramfs etc.) get stored in flash with image header stripped so they can be mounted through MTD
* | | Merge with /home/stefan/git/u-boot/denx-merge-srStefan Roese2007-03-0114-83/+617
|\ \ \ | |/ /
| * | [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUMStefan Roese2007-03-011-0/+8
| |/ | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
| * Minor code cleanup.Wolfgang Denk2007-02-2711-81/+518
| |
| * MCC200 update - add LCD Progress IndicatorSergei Poselenov2007-02-273-9/+98
| |
* | [PATCH] Update AMCC Katmai 440SPe eval board supportStefan Roese2007-03-017-180/+369
|/ | | | | | | | | | | This patch updates the recently added Katmai board support. The biggest change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2 driver. Please note, that still some problems are left with some memory configurations. See the driver for more details. Signed-off-by: Stefan Roese <sr@denx.de>
* [PATCH] get_dev() now unconditionally uses manual relocationStefan Roese2007-02-221-9/+1
| | | | | | | | Since the relocation fix is not included yet and we're not sure how it will be added, this patch removes code that required relocation to be fixed for now. Signed-off-by: Stefan Roese <sr@denx.de>
* [PATCH] Change systemace driver to select 8 & 16bit modeStefan Roese2007-02-221-5/+2
| | | | | | | As suggested by Grant Likely this patch enables the Xilinx SystemACE driver to select 8 or 16bit mode upon startup. Signed-off-by: Stefan Roese <sr@denx.de>
* [PATCH v3] Add sync to ensure flash_write_cmd is fully finishedHaiying Wang2007-02-2111-16/+54
| | | | | | | | | Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command is fully finished. The sync() is defined in each CPU's io.h file. For those CPUs which do not need sync for now, a dummy sync() is defined in their io.h as well. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
* [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)Stefan Roese2007-02-211-4/+4
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* Merge with /home/stefan/git/u-boot/denx-merge-srStefan Roese2007-02-211-9/+11
|\
| * Merge with git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx-merge-srStefan Roese2007-02-211-9/+11
| |\
| | * MCC200: Software Updater: allow both "ramdisk" and "filesystem" typesWolfgang Denk2007-02-191-9/+11
| | | | | | | | | | | | as root file system images.
* | | [PATCH] Fix relocation problem with "new" get_dev() functionStefan Roese2007-02-201-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables the "new" get_dev() function for block devices introduced by Grant Likely to be used on systems that still suffer from the relocation problems (manual relocation neede because of problems with linker script). Hopefully we can resolve this relocation issue soon for all platform so we don't need this additional code anymore. Signed-off-by: Stefan Roese <sr@denx.de>
* | | [PATCH] Update SystemACE driver for 16bit accessStefan Roese2007-02-201-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | This patch removes some problems when the Xilinx SystemACE driver is used with 16bit access on an big endian platform (like the AMCC Katmai). Signed-off-by: Stefan Roese <sr@denx.de>
* | | [PATCH] Clean up Katmai (440SPe) linker scriptStefan Roese2007-02-201-16/+0
| | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | | Merge with /home/stefan/git/u-boot/denx-merge-srStefan Roese2007-02-2049-526/+1220
|\ \ \ | |/ /
| * | [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write ↵Grant Likely2007-02-207-16/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | buffer pointers Block device read/write is anonymous data; there is no need to use a typed pointer. void * is fine. Also add a hook for block_read functions Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * | [PATCH 8_9] Add block_write hook to block_dev_desc_tGrant Likely2007-02-201-0/+4
| | | | | | | | | | | | | | | | | | Preparation for future patches which support block device writing Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * | [PATCH 7_9] Replace ace_readw_ace_writeb functions with macrosGrant Likely2007-02-201-26/+10
| | | | | | | | | | | | | | | | | | | | | Register read/write does not need to be wrapped in a full function. The patch replaces them with macros. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * | [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.cGrant Likely2007-02-203-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | The code in this file is not a command; it is a device driver. Put it in the correct place. There are zero functional changes in this patch, it only moves the file. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
OpenPOWER on IntegriCloud