summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
| * x86: crownbay: Enable DM RTC supportBin Meng2015-07-143-0/+8
| | | | | | | | | | | | | | Add a RTC node in the device tree to enable DM RTC support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * cmd: date: Change to use CONFIG_DM_RTC instead of CONFIG_DM_I2CBin Meng2015-07-141-6/+6
| | | | | | | | | | | | | | | | Currently CONFIG_DM_I2C is used in cmd_date.c for driver model, but it should be actually CONFIG_DM_RTC. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * dm: rtc: Support mc146818 driver in driver modelBin Meng2015-07-141-108/+204
| | | | | | | | | | | | | | | | Add driver model support to the mc146818 rtc driver. Also clean up the driver a little bit for coding convention issues. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: crownbay: Add MP initializationBin Meng2015-07-142-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | Intel Crown Bay board has a TunnelCreek processor which supports hyper-threading. Add /cpus node in the crownbay.dts and enable the MP initialization. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> (modified to remove error: overriding the value of OF_CONTROL. Old value: "y", new value: "y")
| * x86: Clean up lapic codesBin Meng2015-07-145-183/+103
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit cleans up the lapic codes: - Delete arch/x86/include/asm/lapic_def.h, and move register and bit defines into arch/x86/include/asm/lapic.h - Use MSR defines from msr-index.h in enable_lapic() and disable_lapic() - Remove unnecessary stuff like NEED_LAPIC, X86_GOOD_APIC and CONFIG_AP_IN_SIPI_WAIT - Move struct x86_cpu_priv defines to asm/arch-ivybridge/bd82x6x.h, as it is not apic related and only used by ivybridge - Fix coding convention issues Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: Move lapic_setup() call into init_bsp()Bin Meng2015-07-142-3/+1
| | | | | | | | | | | | | | | | | | | | Currently lapic_setup() is called before calling mp_init(), which then calls init_bsp() where it calls enable_lapic(), which was already enabled in lapic_setup(). Hence move lapic_setup() call into init_bsp() to avoid the duplication. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: Move MP initialization codes into a common placeBin Meng2015-07-146-73/+114
| | | | | | | | | | | | | | | | | | | | | | Most of the MP initialization codes in arch/x86/cpu/baytrail/cpu.c is common to all x86 processors, except detect_num_cpus() which varies from cpu to cpu. Move these to arch/x86/cpu/cpu.c and implement the new 'get_count' method for baytrail and cpu_x86 drivers. Now we call cpu_get_count() in mp_init() to get the number of CPUs. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: ivybridge: Remove SMP from CPU_SPECIFIC_OPTIONSBin Meng2015-07-141-1/+0
| | | | | | | | | | | | | | Ivybridge is not ready for U-Boot MP initialization yet. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * dm: cpu: Add a new get_count method to cpu uclassBin Meng2015-07-142-0/+26
| | | | | | | | | | | | | | | | Introduce a new method 'get_count' in the UCLASS_CPU ops to get the number of CPUs in the system. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: kconfig: Fix minor nits in MAX_CPUSBin Meng2015-07-141-12/+12
| | | | | | | | | | | | | | | | | | Move MAX_CPUS definition after SMP so that it shows below SMP in the menuconfig. Also replace the leading spaces in the MAX_CPUS section with tabs to conform coding standard. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: kconfig: Make MAX_CPUS and AP_STACK_SIZE depend on SMPBin Meng2015-07-141-0/+2
| | | | | | | | | | | | | | MAX_CPUS and AP_STACK_SIZE are only meaningful when SMP is on. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: dm: Clean up cpu driversBin Meng2015-07-146-55/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit does the following to clean up x86 cpu dm drivers: - Move cpu_x86 driver codes from arch/x86/cpu/cpu.c to a dedicated file arch/x86/cpu/cpu_x86.c - Rename x86_cpu_get_desc() to cpu_x86_get_desc() to keep consistent naming with other dm drivers - Add a new cpu_x86_bind() in the cpu_x86 driver which does exactly the same as the one in the intel baytrail cpu driver - Update intel baytrail cpu driver to use cpu_x86_get_desc() and cpu_x86_bind() Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * dm: cpu: Test against cpu_ops->get_info in cpu_get_info()Bin Meng2015-07-141-1/+1
| | | | | | | | | | | | | | In cpu_get_info() it wrongly tests against cpu_ops->get_desc to see if it is NULL. It should test against cpu_ops->get_info. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
| * dm: cpu: Fix undefined ENOSYS build errorBin Meng2015-07-142-0/+2
| | | | | | | | | | | | | | Include <errno.h> otherwise ENOSYS is undefined. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * dm: spi: Correct minor nits in ICH driverSimon Glass2015-07-141-3/+2
| | | | | | | | | | | | | | | | Tidy up three minor problems in this file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * spi: sf: Print the error code on failureSimon Glass2015-07-141-2/+6
| | | | | | | | | | | | | | | | | | | | Rather than just 'ERROR', display the error code, which may be useful, at least with driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * x86: fsp: Move FspInitEntry call to board_init_f()Bin Meng2015-07-145-22/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The call to FspInitEntry is done in arch/x86/lib/fsp/fsp_car.S so far. It worked pretty well but looks not that good. Apart from doing too much work than just enabling CAR, it cannot read the configuration data from device tree at that time. Now we want to move it a little bit later as part of init_sequence_f[] being called by board_init_f(). This way it looks and works better in the U-Boot initialization path. Due to FSP's design, after calling FspInitEntry it will not return to its caller, instead it jumps to a continuation function which is given by bootloader with a new stack in system memory. The original stack in the CAR is gone, but its content is perserved by FSP and described by a bootloader temporary memory HOB. Technically we can recover anything we had before in the previous stack, but that is way too complicated. To make life much easier, in the FSP continuation routine we just simply call fsp_init_done() and jump back to car_init_ret() to redo the whole board_init_f() initialization, but this time with a non-zero HOB list pointer saved in U-Boot's global data so that we can bypass the FspInitEntry for the second time. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Andrew Bradford <andrew.bradford@kodakalaris.com> Tested-by: Simon Glass <sjg@chromium.org>
| * x86: fsp: Load GDT before calling FspInitEntryBin Meng2015-07-144-2/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the FSP execution environment GDT is setup by U-Boot in arch/x86/cpu/start16.S, which works pretty well. But if we try to move the FspInitEntry call a little bit later to better fit into U-Boot's initialization sequence, FSP will fail to bring up the AP due to #GP fault as AP's GDT is duplicated from BSP whose GDT is now moved into CAR, and unfortunately FSP calls AP initialization after it disables the CAR. So basically the BSP's GDT still refers to the one in the CAR, whose content is no longer available, so when AP starts up and loads its segment register, it blows up. To resolve this, we load GDT before calling into FspInitEntry. The GDT is the same one used in arch/x86/cpu/start16.S, which is in the ROM and exists forever. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Andrew Bradford <andrew.bradford@kodakalaris.com> Tested-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: Add Kconfig options to be used by arch/x86/cpu/config.mkBin Meng2015-07-142-3/+18
| | | | | | | | | | | | | | | | | | | | Add RESET_SEG_START, RESET_SEG_SIZE and RESET_VEC_LOC Kconfig options and make arch/x86/cpu/config.mk use these options. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Andrew Bradford <andrew.bradford@kodakalaris.com> Tested-by: Simon Glass <sjg@chromium.org>
| * builderthread.py: Keep 'SPL'Tom Rini2015-07-141-1/+1
| | | | | | | | | | | | | | | | | | On i.MX platforms the SPL binary is called "SPL" so make sure we keep that. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2015-07-1415-41/+151
|\ \ | |/ |/|
| * spi: cadence_qspi: add device tree binding docVikas Manocha2015-07-032-5/+28
| | | | | | | | | | | | | | | | This patch adds the device tree binding doc for the cadence qspi controller & also removes the not needed properties from the stv0991 device tree. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Jagannadh Teki <jteki@openedev.com>
| * spi: cadence_qspi: support FIFO width other than 4 bytesVikas Manocha2015-07-031-23/+23
| | | | | | | | | | | | | | | | | | This patch makes the code compatible with FIFO depths other than 4 bytes. It also simplify read/write FIFO loops. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Tested-by: Stefan Roese <sr@denx.de> Reviewed-by: Jagannadh Teki <jteki@openedev.com>
| * spi: cadence_qspi: get sram size from device treeVikas Manocha2015-07-035-5/+5
| | | | | | | | | | | | | | | | | | sram size could be different on different socs, e.g. on stv0991 it is 256 while on altera platform it is 128. It is better to receive it from device tree. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Tested-by: Stefan Roese <sr@denx.de> Reviewed-by: Jagannadh Teki <jteki@openedev.com>
| * spi: cadence_qspi: move the sram partition in initVikas Manocha2015-07-031-11/+5
| | | | | | | | | | | | | | | | | | | | There is no need to re-configure sram partition for every read/write for better full use of sram for read or write. This patch divides the half sram for read & half for write once at initialization. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Tested-by: Stefan Roese <sr@denx.de> Reviewed-by: Jagannadh Teki <jteki@openedev.com>
| * stv0991: configure device tree for cadence qspi & flashVikas Manocha2015-07-031-0/+34
| | | | | | | | | | | | | | | | This patch add the device tree entry for qspi controller & spi flash memory. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Jagannadh Teki <jteki@openedev.com>
| * stv0991: enable cadence qspi controller & spi flashVikas Manocha2015-07-032-0/+18
| | | | | | | | | | | | | | | | This patch does all the board configurations required to use the qspi controller & attached spi flash memory. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Jagannadh Teki <jteki@openedev.com>
| * stv0991: configure clock & pad muxing for qspiVikas Manocha2015-07-036-1/+42
| | | | | | | | | | | | | | | | stv0991 has cadence qspi controller for flash interfacing, this patch configures the device pads & clock for the controller. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Jagannadh Teki <jteki@openedev.com>
| * stv0991: remove define CONFIG_OF_SEPARATE from board fileVikas Manocha2015-07-031-1/+0
| | | | | | | | | | | | | | | | CONFIG_OF_SEPARATE is default define with CONFIG_OF_CONTROL, removing this define from the board file to avoid multiple definition warning. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Jagannadh Teki <jteki@openedev.com>
| * stv0991: move OF_CONTROL config to defconfigVikas Manocha2015-07-032-1/+1
| | | | | | | | | | Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Jagannadh Teki <jteki@openedev.com>
| * stv0991: enable saving enrironment in spi flashVikas Manocha2015-07-032-2/+3
| | | | | | | | | | Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Jagannadh Teki <jteki@openedev.com>
* | RFC: Deprecate MAKEALLSimon Glass2015-07-141-0/+10
| | | | | | | | | | | | | | | | | | Since buildman now includes most of the features of MAKEALL it is probably time to talk about deprecating MAKEALL. Comments welcome. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Prepare v2015.07Tom Rini2015-07-141-1/+1
| | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com>
* | scsi: fix compiler warning with DEBUG and 48bit LBAsAndre Przywara2015-07-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 2b42c9317db ("ahci: support LBA48 data reads for 2+TB drives") introduced conditional code which triggers a warning when compiled with DEBUG enabled: In file included from common/cmd_scsi.c:12:0: common/cmd_scsi.c: In function 'scsi_read': include/common.h:109:4: warning: 'smallblks' may be used uninitialized in this function [-Wmaybe-uninitialized] ... Since this is for debug only, take the easy way and initialize the variable explicitly on declaration to avoid the warning. (Fix a nearby whitespace error on the way.) Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Andre Przywara <osp@andrep.de>
* | Merge git://git.denx.de/u-boot-samsungTom Rini2015-07-102-1/+2
|\ \
| * | exynos: i2c: Correct bug in pinmux selectionSimon Glass2015-07-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When driver model is not used the current code does not correctly select the pinmux for the I2C bus. This bug was introduced by this commit: 8dfcbaa dm: i2c: s3c24x0: adjust to dm-i2c api Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de> Reviewed-by: Przemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | arm: adds the status info for odroid-xu3Minkyu Kang2015-07-101-0/+1
| | | | | | | | | | | | | | | | | | Adds the 'F:' entry for the board's defconfig Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | Merge git://git.denx.de/u-boot-marvellTom Rini2015-07-109-8/+184
|\ \ \
| * | | arm: mvebu: db-88f6820-gp: Add USB/EHCI supportStefan Roese2015-07-101-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enabled the USB/EHCI support for the Marvell DB-88F6820-GP eval board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * | | usb: Add EHCI support for Armada 38x (mvebu)Stefan Roese2015-07-102-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds USB EHCI host support for the common mvebu platform. Including the Armada 38x. Tested on DB-88F6280-GP eval board. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * | | arm: mvebu: db-88f6820-gp.h: Add SATA/SCSI (AHCI) supportStefan Roese2015-07-101-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Configure and enable the SATA/SCSI (AHCI) support for the Marvell DB-88F6820-GP eval board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * | | arm: mvebu: Add SATA/SCSI (AHCI) support for Armada A38xStefan Roese2015-07-103-0/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the common AHCI controller on the Marvell Armada 38x. Tested on the Marvell DB-88F6820-GP eval board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * | | block: ahci: Don't enable port interruptsStefan Roese2015-07-101-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes the initialization of the AHCI controller to not enable the default interrupts (DEF_PORT_IRQ). As interrupts are not used in U-Boot in general, this should not break the common AHCI driver operation. This change is needed to support the Marvell Armada 38x AHCI controller. With interrupts enabled, this results in timeouts in ahci_device_data_io(). Not enabling these interrupts fixes this problem and the common AHCI driver works fine. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * | | arm: mvebu: db-88f6820-gp: Add MMC/SDIO supportStefan Roese2015-07-101-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds MMC/SDIO support to the Marvell DB-88F6820-GP board configuration. Including support for the common partitions and filesystems. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * | | arm: mvebu: Add SDIO/SDHCI support for Armada A38xStefan Roese2015-07-104-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Armada A38x implements an SDHCI compatible SDIO controller. This patch enables the Marvell driver to support this SoC. And enables the SDIO controller if selected by the board configuration. Tested on Marvell DB-88F6820-GP board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * | | mmc: sdhci.c: Add config option to use a fixed buffer for transfersStefan Roese2015-07-101-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While implementing SDIO/MMC SPL booting for the Marvell Armada 38x, the following problem occured. The SPL runs in internal SRAM which is the L2 cache locked to memory. When the MMC buffers now are located on the stack (or bss), the SDIO controller (SDHCI) can't write into this L2 cache memory. This patch introduces a method to use a fixed buffer that will be used for all transfers by defining CONFIG_FIXED_SDHCI_ALIGNED_BUFFER. This way, the board can use this buffer address located in SDRAM for all transfers. This solves this SPL problem on the A38x and should only be used in the SPL U-Boot version. Tested for SPL booting on Marvell Armada 38x DB-88F6820-GP board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * | | mmc: sdhci: Use timer based timeout detection in sdhci_send_command()Stefan Roese2015-07-101-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The loop counter based timeout detection does not work on the Armada 38x based board (DB-88F6820-GP). At least with dcache enabled a timeout is detected. Without dcache enabled, the timeout does not occur. Increasing the loop counter solves this issue. But a better solution is to use a timer based timeout detection instead. This patch now implements this timer based detection. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
| * | | arm: mvebu: db-88f6820-gp: Add MAINTAINERS fileStefan Roese2015-07-101-0/+6
| |/ / | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
* | | mtd: fix false positive "Offset exceeds device limit" errorMasahiro Yamada2015-07-102-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 09c3280754f8 (mtd, nand: Move common functions from cmd_nand.c to common place), NAND commands would not work at all on large devices. => nand read 80000000 10000 10000 NAND read: Offset exceeds device limit => nand erase 100000 100000 NAND erase: Offset exceeds device limit The type of the "size" of "struct mtd_info" is uint64_t, while mtd_arg_off_size() and mtd_arg_off() treat chipsize as int type. The chipsize is wrapped around if the argument is given with 2GB or larger. Acked-by: Heiko Schocher <hs@denx.de> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | | ahci: Fix compiling warnings under 64bit platformsTang Yuantian2015-07-093-38/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When compling under 64bit platforms, there are lots of warnings, like: drivers/block/ahci.c:114:18: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] u8 *port_mmio = (u8 *)probe_ent->port[port].port_mmio; ^ drivers/block/ahci.c: In function ?.hci_host_init?. drivers/block/ahci.c:218:49: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] probe_ent->port[i].port_mmio = ahci_port_base((u32) mmio, i); ...... Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
OpenPOWER on IntegriCloud