diff options
Diffstat (limited to 'post/uart.c')
| -rw-r--r-- | post/uart.c | 560 |
1 files changed, 0 insertions, 560 deletions
diff --git a/post/uart.c b/post/uart.c deleted file mode 100644 index fd97e3899e..0000000000 --- a/post/uart.c +++ /dev/null @@ -1,560 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> - -/* - * UART test - * - * The Serial Management Controllers (SMC) and the Serial Communication - * Controllers (SCC) listed in ctlr_list array below are tested in - * the loopback UART mode. - * The controllers are configured accordingly and several characters - * are transmitted. The configurable test parameters are: - * MIN_PACKET_LENGTH - minimum size of packet to transmit - * MAX_PACKET_LENGTH - maximum size of packet to transmit - * TEST_NUM - number of tests - */ - -#ifdef CONFIG_POST - -#include <post.h> -#if CONFIG_POST & CFG_POST_UART -#if defined(CONFIG_8xx) -#include <commproc.h> -#elif defined(CONFIG_MPC8260) -#include <asm/cpm_8260.h> -#else -#error "Apparently a bad configuration, please fix." -#endif -#include <command.h> -#include <serial.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define CTLR_SMC 0 -#define CTLR_SCC 1 - -/* The list of controllers to test */ -#if defined(CONFIG_MPC823) -static int ctlr_list[][2] = - { {CTLR_SMC, 0}, {CTLR_SMC, 1}, {CTLR_SCC, 1} }; -#else -static int ctlr_list[][2] = { }; -#endif - -#define CTRL_LIST_SIZE (sizeof(ctlr_list) / sizeof(ctlr_list[0])) - -static struct { - void (*init) (int index); - void (*halt) (int index); - void (*putc) (int index, const char c); - int (*getc) (int index); -} ctlr_proc[2]; - -static char *ctlr_name[2] = { "SMC", "SCC" }; - -static int proff_smc[] = { PROFF_SMC1, PROFF_SMC2 }; -static int proff_scc[] = - { PROFF_SCC1, PROFF_SCC2, PROFF_SCC3, PROFF_SCC4 }; - -/* - * SMC callbacks - */ - -static void smc_init (int smc_index) -{ - static int cpm_cr_ch[] = { CPM_CR_CH_SMC1, CPM_CR_CH_SMC2 }; - - volatile immap_t *im = (immap_t *) CFG_IMMR; - volatile smc_t *sp; - volatile smc_uart_t *up; - volatile cbd_t *tbdf, *rbdf; - volatile cpm8xx_t *cp = &(im->im_cpm); - uint dpaddr; - - /* initialize pointers to SMC */ - - sp = (smc_t *) & (cp->cp_smc[smc_index]); - up = (smc_uart_t *) & cp->cp_dparam[proff_smc[smc_index]]; - - /* Disable transmitter/receiver. - */ - sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); - - /* Enable SDMA. - */ - im->im_siu_conf.sc_sdcr = 1; - - /* clear error conditions */ -#ifdef CFG_SDSR - im->im_sdma.sdma_sdsr = CFG_SDSR; -#else - im->im_sdma.sdma_sdsr = 0x83; -#endif - - /* clear SDMA interrupt mask */ -#ifdef CFG_SDMR - im->im_sdma.sdma_sdmr = CFG_SDMR; -#else - im->im_sdma.sdma_sdmr = 0x00; -#endif - -#if defined(CONFIG_FADS) - /* Enable RS232 */ - *((uint *) BCSR1) &= - ~(smc_index == 1 ? BCSR1_RS232EN_1 : BCSR1_RS232EN_2); -#endif - -#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC) - /* Enable Monitor Port Transceiver */ - *((uchar *) BCSR0) |= BCSR0_ENMONXCVR; -#endif - - /* Set the physical address of the host memory buffers in - * the buffer descriptors. - */ - -#ifdef CFG_ALLOC_DPRAM - dpaddr = dpram_alloc_align (sizeof (cbd_t) * 2 + 2, 8); -#else - dpaddr = CPM_POST_BASE; -#endif - - /* Allocate space for two buffer descriptors in the DP ram. - * For now, this address seems OK, but it may have to - * change with newer versions of the firmware. - * damm: allocating space after the two buffers for rx/tx data - */ - - rbdf = (cbd_t *) & cp->cp_dpmem[dpaddr]; - rbdf->cbd_bufaddr = (uint) (rbdf + 2); - rbdf->cbd_sc = 0; - tbdf = rbdf + 1; - tbdf->cbd_bufaddr = ((uint) (rbdf + 2)) + 1; - tbdf->cbd_sc = 0; - - /* Set up the uart parameters in the parameter ram. - */ - up->smc_rbase = dpaddr; - up->smc_tbase = dpaddr + sizeof (cbd_t); - up->smc_rfcr = SMC_EB; - up->smc_tfcr = SMC_EB; - -#if defined(CONFIG_MBX) - board_serial_init (); -#endif - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - * Set local loopback mode. - */ - sp->smc_smcmr = smcr_mk_clen (9) | SMCMR_SM_UART | (ushort) 0x0004; - - /* Mask all interrupts and remove anything pending. - */ - sp->smc_smcm = 0; - sp->smc_smce = 0xff; - - /* Set up the baud rate generator. - */ - cp->cp_simode = 0x00000000; - - cp->cp_brgc1 = - (((gd->cpu_clk / 16 / gd->baudrate) - - 1) << 1) | CPM_BRG_EN; - - /* Make the first buffer the only buffer. - */ - tbdf->cbd_sc |= BD_SC_WRAP; - rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP; - - /* Single character receive. - */ - up->smc_mrblr = 1; - up->smc_maxidl = 0; - - /* Initialize Tx/Rx parameters. - */ - - while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */ - ; - - cp->cp_cpcr = - mk_cr_cmd (cpm_cr_ch[smc_index], CPM_CR_INIT_TRX) | CPM_CR_FLG; - - while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */ - ; - - /* Enable transmitter/receiver. - */ - sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN; -} - -static void smc_halt(int smc_index) -{ -} - -static void smc_putc (int smc_index, const char c) -{ - volatile cbd_t *tbdf; - volatile char *buf; - volatile smc_uart_t *up; - volatile immap_t *im = (immap_t *) CFG_IMMR; - volatile cpm8xx_t *cpmp = &(im->im_cpm); - - up = (smc_uart_t *) & cpmp->cp_dparam[proff_smc[smc_index]]; - - tbdf = (cbd_t *) & cpmp->cp_dpmem[up->smc_tbase]; - - /* Wait for last character to go. - */ - - buf = (char *) tbdf->cbd_bufaddr; -#if 0 - __asm__ ("eieio"); - while (tbdf->cbd_sc & BD_SC_READY) - __asm__ ("eieio"); -#endif - - *buf = c; - tbdf->cbd_datlen = 1; - tbdf->cbd_sc |= BD_SC_READY; - __asm__ ("eieio"); -#if 1 - while (tbdf->cbd_sc & BD_SC_READY) - __asm__ ("eieio"); -#endif -} - -static int smc_getc (int smc_index) -{ - volatile cbd_t *rbdf; - volatile unsigned char *buf; - volatile smc_uart_t *up; - volatile immap_t *im = (immap_t *) CFG_IMMR; - volatile cpm8xx_t *cpmp = &(im->im_cpm); - unsigned char c; - int i; - - up = (smc_uart_t *) & cpmp->cp_dparam[proff_smc[smc_index]]; - - rbdf = (cbd_t *) & cpmp->cp_dpmem[up->smc_rbase]; - - /* Wait for character to show up. - */ - buf = (unsigned char *) rbdf->cbd_bufaddr; -#if 0 - while (rbdf->cbd_sc & BD_SC_EMPTY); -#else - for (i = 100; i > 0; i--) { - if (!(rbdf->cbd_sc & BD_SC_EMPTY)) - break; - udelay (1000); - } - - if (i == 0) - return -1; -#endif - c = *buf; - rbdf->cbd_sc |= BD_SC_EMPTY; - - return (c); -} - - /* - * SCC callbacks - */ - -static void scc_init (int scc_index) -{ - static int cpm_cr_ch[] = { - CPM_CR_CH_SCC1, - CPM_CR_CH_SCC2, - CPM_CR_CH_SCC3, - CPM_CR_CH_SCC4, - }; - - volatile immap_t *im = (immap_t *) CFG_IMMR; - volatile scc_t *sp; - volatile scc_uart_t *up; - volatile cbd_t *tbdf, *rbdf; - volatile cpm8xx_t *cp = &(im->im_cpm); - uint dpaddr; - - /* initialize pointers to SCC */ - - sp = (scc_t *) & (cp->cp_scc[scc_index]); - up = (scc_uart_t *) & cp->cp_dparam[proff_scc[scc_index]]; - - /* Disable transmitter/receiver. - */ - sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); - - - /* Allocate space for two buffer descriptors in the DP ram. - */ - -#ifdef CFG_ALLOC_DPRAM - dpaddr = dpram_alloc_align (sizeof (cbd_t) * 2 + 2, 8); -#else - dpaddr = CPM_POST_BASE; -#endif - - /* Enable SDMA. - */ - im->im_siu_conf.sc_sdcr = 0x0001; - - /* Set the physical address of the host memory buffers in - * the buffer descriptors. - */ - - rbdf = (cbd_t *) & cp->cp_dpmem[dpaddr]; - rbdf->cbd_bufaddr = (uint) (rbdf + 2); - rbdf->cbd_sc = 0; - tbdf = rbdf + 1; - tbdf->cbd_bufaddr = ((uint) (rbdf + 2)) + 1; - tbdf->cbd_sc = 0; - - /* Set up the baud rate generator. - */ - cp->cp_sicr &= ~(0x000000FF << (8 * scc_index)); - /* no |= needed, since BRG1 is 000 */ - - cp->cp_brgc1 = - (((gd->cpu_clk / 16 / gd->baudrate) - - 1) << 1) | CPM_BRG_EN; - - /* Set up the uart parameters in the parameter ram. - */ - up->scc_genscc.scc_rbase = dpaddr; - up->scc_genscc.scc_tbase = dpaddr + sizeof (cbd_t); - - /* Initialize Tx/Rx parameters. - */ - while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */ - ; - cp->cp_cpcr = - mk_cr_cmd (cpm_cr_ch[scc_index], CPM_CR_INIT_TRX) | CPM_CR_FLG; - - while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */ - ; - - up->scc_genscc.scc_rfcr = SCC_EB | 0x05; - up->scc_genscc.scc_tfcr = SCC_EB | 0x05; - - up->scc_genscc.scc_mrblr = 1; /* Single character receive */ - up->scc_maxidl = 0; /* disable max idle */ - up->scc_brkcr = 1; /* send one break character on stop TX */ - up->scc_parec = 0; - up->scc_frmec = 0; - up->scc_nosec = 0; - up->scc_brkec = 0; - up->scc_uaddr1 = 0; - up->scc_uaddr2 = 0; - up->scc_toseq = 0; - up->scc_char1 = 0x8000; - up->scc_char2 = 0x8000; - up->scc_char3 = 0x8000; - up->scc_char4 = 0x8000; - up->scc_char5 = 0x8000; - up->scc_char6 = 0x8000; - up->scc_char7 = 0x8000; - up->scc_char8 = 0x8000; - up->scc_rccm = 0xc0ff; - - /* Set low latency / small fifo. - */ - sp->scc_gsmrh = SCC_GSMRH_RFW; - - /* Set UART mode - */ - sp->scc_gsmrl &= ~0xF; - sp->scc_gsmrl |= SCC_GSMRL_MODE_UART; - - /* Set local loopback mode. - */ - sp->scc_gsmrl &= ~SCC_GSMRL_DIAG_LE; - sp->scc_gsmrl |= SCC_GSMRL_DIAG_LOOP; - - /* Set clock divider 16 on Tx and Rx - */ - sp->scc_gsmrl |= (SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16); - - sp->scc_psmr |= SCU_PSMR_CL; - - /* Mask all interrupts and remove anything pending. - */ - sp->scc_sccm = 0; - sp->scc_scce = 0xffff; - sp->scc_dsr = 0x7e7e; - sp->scc_psmr = 0x3000; - - /* Make the first buffer the only buffer. - */ - tbdf->cbd_sc |= BD_SC_WRAP; - rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP; - - /* Enable transmitter/receiver. - */ - sp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); -} - -static void scc_halt(int scc_index) -{ - volatile immap_t *im = (immap_t *) CFG_IMMR; - volatile cpm8xx_t *cp = &(im->im_cpm); - volatile scc_t *sp = (scc_t *) & (cp->cp_scc[scc_index]); - - sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT | SCC_GSMRL_DIAG_LE); -} - -static void scc_putc (int scc_index, const char c) -{ - volatile cbd_t *tbdf; - volatile char *buf; - volatile scc_uart_t *up; - volatile immap_t *im = (immap_t *) CFG_IMMR; - volatile cpm8xx_t *cpmp = &(im->im_cpm); - - up = (scc_uart_t *) & cpmp->cp_dparam[proff_scc[scc_index]]; - - tbdf = (cbd_t *) & cpmp->cp_dpmem[up->scc_genscc.scc_tbase]; - - /* Wait for last character to go. - */ - - buf = (char *) tbdf->cbd_bufaddr; -#if 0 - __asm__ ("eieio"); - while (tbdf->cbd_sc & BD_SC_READY) - __asm__ ("eieio"); -#endif - - *buf = c; - tbdf->cbd_datlen = 1; - tbdf->cbd_sc |= BD_SC_READY; - __asm__ ("eieio"); -#if 1 - while (tbdf->cbd_sc & BD_SC_READY) - __asm__ ("eieio"); -#endif -} - -static int scc_getc (int scc_index) -{ - volatile cbd_t *rbdf; - volatile unsigned char *buf; - volatile scc_uart_t *up; - volatile immap_t *im = (immap_t *) CFG_IMMR; - volatile cpm8xx_t *cpmp = &(im->im_cpm); - unsigned char c; - int i; - - up = (scc_uart_t *) & cpmp->cp_dparam[proff_scc[scc_index]]; - - rbdf = (cbd_t *) & cpmp->cp_dpmem[up->scc_genscc.scc_rbase]; - - /* Wait for character to show up. - */ - buf = (unsigned char *) rbdf->cbd_bufaddr; -#if 0 - while (rbdf->cbd_sc & BD_SC_EMPTY); -#else - for (i = 100; i > 0; i--) { - if (!(rbdf->cbd_sc & BD_SC_EMPTY)) - break; - udelay (1000); - } - - if (i == 0) - return -1; -#endif - c = *buf; - rbdf->cbd_sc |= BD_SC_EMPTY; - - return (c); -} - - /* - * Test routines - */ - -static int test_ctlr (int ctlr, int index) -{ - int res = -1; - char test_str[] = "*** UART Test String ***\r\n"; - int i; - - ctlr_proc[ctlr].init (index); - - for (i = 0; i < sizeof (test_str) - 1; i++) { - ctlr_proc[ctlr].putc (index, test_str[i]); - if (ctlr_proc[ctlr].getc (index) != test_str[i]) - goto Done; - } - - res = 0; - -Done: - ctlr_proc[ctlr].halt (index); - - if (res != 0) { - post_log ("uart %s%d test failed\n", - ctlr_name[ctlr], index + 1); - } - - return res; -} - -int uart_post_test (int flags) -{ - int res = 0; - int i; - - ctlr_proc[CTLR_SMC].init = smc_init; - ctlr_proc[CTLR_SMC].halt = smc_halt; - ctlr_proc[CTLR_SMC].putc = smc_putc; - ctlr_proc[CTLR_SMC].getc = smc_getc; - - ctlr_proc[CTLR_SCC].init = scc_init; - ctlr_proc[CTLR_SCC].halt = scc_halt; - ctlr_proc[CTLR_SCC].putc = scc_putc; - ctlr_proc[CTLR_SCC].getc = scc_getc; - - for (i = 0; i < CTRL_LIST_SIZE; i++) { - if (test_ctlr (ctlr_list[i][0], ctlr_list[i][1]) != 0) { - res = -1; - } - } - -#if !defined(CONFIG_8xx_CONS_NONE) - serial_reinit_all (); -#endif - - return res; -} - -#endif /* CONFIG_POST & CFG_POST_UART */ - -#endif /* CONFIG_POST */ |
