diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/lpd7a400-10.h | 80 | ||||
| -rw-r--r-- | include/configs/lpd7a400.h | 117 | ||||
| -rw-r--r-- | include/configs/lpd7a404-10.h | 80 | ||||
| -rw-r--r-- | include/configs/lpd7a404.h | 117 |
4 files changed, 0 insertions, 394 deletions
diff --git a/include/configs/lpd7a400-10.h b/include/configs/lpd7a400-10.h deleted file mode 100644 index 91bf1fabdd..0000000000 --- a/include/configs/lpd7a400-10.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Logic LH7A400-10 card engine - */ - -#ifndef __LPD7A400_10_H -#define __LPD7A400_10_H - - -#define CONFIG_ARM920T 1 /* arm920t core */ -#define CONFIG_LH7A40X 1 /* Sharp LH7A40x SoC family */ -#define CONFIG_LH7A400 1 /* Sharp LH7A400 S0C */ - -/* The system clock PLL input frequency */ -#define CONFIG_SYS_CLK_FREQ 14745600 /* System Clock PLL Input (Hz) */ - -/* ticks per second */ -#define CONFIG_SYS_HZ (508469) - -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ - -#define CONFIG_SYS_FLASH_BASE 0x00000000 /* Flash Bank #1 */ - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT (64) /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -/*---------------------------------------------------------------------- - * Using SMC91C111 LAN chip - * - * Default IO base of chip is 0x300, Card Engine has this address lines - * (LAN chip) tied to Vcc, so we just care about the chip select - */ -#define CONFIG_NET_MULTI -#define CONFIG_SMC91111 -#define CONFIG_SMC91111_BASE (0x70000000) -#undef CONFIG_SMC_USE_32_BIT - -#endif /* __LPD7A400_10_H */ diff --git a/include/configs/lpd7a400.h b/include/configs/lpd7a400.h deleted file mode 100644 index 06f3d7e58f..0000000000 --- a/include/configs/lpd7a400.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __LPD7A400_H_ -#define __LPD7A400_H_ - -#define CONFIG_LPD7A400 /* Logic LH7A400 SDK */ - -#undef CONFIG_USE_IRQ - -/* - * This board uses the logic LH7A400-10 card engine - */ -#include <configs/lpd7a400-10.h> - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * select serial console configuration - */ -#define CONFIG_LH7A40X_SERIAL -#define CONFIG_CONSOLE_UART2 /* UART2 LH7A40x for console */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 -#define CONFIG_IPADDR 192.168.1.100 -#define CONFIG_NETMASK 255.255.1.0 -#define CONFIG_SERVERIP 192.168.1.1 - -#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#ifndef USE_920T_MMU - #define CONFIG_CMD_PING - #undef CONFIG_CMD_CACHE -#else - #define CONFIG_CMD_DATE -#endif - - -#define CONFIG_BOOTDELAY 3 - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -/* what's this ? it's not used anywhere */ -#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "LPD7A400> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0xc0300000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xc0500000 /* 2 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xc0f00000 /* default load address */ - -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/* size and location of u-boot in flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN (256<<10) - -#define CONFIG_ENV_IS_IN_FLASH 1 - -/* Address and size of Primary Environment Sector */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0xFC0000) -#define CONFIG_ENV_SIZE 0x40000 - -#endif /* __LPD7A400_H_ */ diff --git a/include/configs/lpd7a404-10.h b/include/configs/lpd7a404-10.h deleted file mode 100644 index b10e69d237..0000000000 --- a/include/configs/lpd7a404-10.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Logic LH7A400-10 card engine - */ - -#ifndef __LPD7A404_10_H -#define __LPD7A404_10_H - - -#define CONFIG_ARM920T 1 /* arm920t core */ -#define CONFIG_LH7A40X 1 /* Sharp LH7A40x SoC family */ -#define CONFIG_LH7A404 1 /* Sharp LH7A404 SoC */ - -/* The system clock PLL input frequency */ -#define CONFIG_SYS_CLK_FREQ 14745600 /* System Clock PLL Input (Hz) */ - -/* ticks per second */ -#define CONFIG_SYS_HZ (508469) - -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ - -#define CONFIG_SYS_FLASH_BASE 0x00000000 /* Flash Bank #1 */ - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT (64) /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -/*---------------------------------------------------------------------- - * Using SMC91C111 LAN chip - * - * Default IO base of chip is 0x300, Card Engine has this address lines - * (LAN chip) tied to Vcc, so we just care about the chip select - */ -#define CONFIG_NET_MULTI -#define CONFIG_SMC91111 -#define CONFIG_SMC91111_BASE (0x70000000) -#undef CONFIG_SMC_USE_32_BIT - -#endif /* __LPD7A404_10_H */ diff --git a/include/configs/lpd7a404.h b/include/configs/lpd7a404.h deleted file mode 100644 index 7535f62d3d..0000000000 --- a/include/configs/lpd7a404.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __LPD7A404_H_ -#define __LPD7A404_H_ - -#define CONFIG_LPD7A404 /* Logic LH7A400 SDK */ - -#undef CONFIG_USE_IRQ - -/* - * This board uses the logic LH7A404-10 card engine - */ -#include <configs/lpd7a404-10.h> - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * select serial console configuration - */ -#define CONFIG_LH7A40X_SERIAL -#define CONFIG_CONSOLE_UART2 /* UART2 LH7A40x for console */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 -#define CONFIG_IPADDR 192.168.1.100 -#define CONFIG_NETMASK 255.255.1.0 -#define CONFIG_SERVERIP 192.168.1.1 - -#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#ifndef USE_920T_MMU - #define CONFIG_CMD_PING - #undef CONFIG_CMD_CACHE -#else - #define CONFIG_CMD_DATE -#endif - - -#define CONFIG_BOOTDELAY 3 - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -/* what's this ? it's not used anywhere */ -#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "LPD7A404> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0xc0300000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xc0500000 /* 2 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xc0f00000 /* default load address */ - -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/* size and location of u-boot in flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN (256<<10) - -#define CONFIG_ENV_IS_IN_FLASH 1 - -/* Address and size of Primary Environment Sector */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0xFC0000) -#define CONFIG_ENV_SIZE 0x40000 - -#endif /* __LPD7A404_H_ */ |
