diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/aria.h | 2 | ||||
| -rw-r--r-- | include/configs/galaxy5200.h | 2 | ||||
| -rw-r--r-- | include/configs/kilauea.h | 2 | ||||
| -rw-r--r-- | include/configs/linkstation.h | 2 | ||||
| -rw-r--r-- | include/configs/quad100hd.h | 6 | ||||
| -rw-r--r-- | include/configs/sc3.h | 4 |
6 files changed, 9 insertions, 9 deletions
diff --git a/include/configs/aria.h b/include/configs/aria.h index f89fc570aa..06763c5d96 100644 --- a/include/configs/aria.h +++ b/include/configs/aria.h @@ -190,7 +190,7 @@ /* * Backward compatible definitions, - * so we do not have to change cpu/mpc512x/fixed_sdram.c + * so we do not have to change arch/ppc/cpu/mpc512x/fixed_sdram.c */ #define CONFIG_SYS_DDRCMD_EM2 (CONFIG_SYS_MICRON_EMR2) #define CONFIG_SYS_DDRCMD_EM3 (CONFIG_SYS_MICRON_EMR3) diff --git a/include/configs/galaxy5200.h b/include/configs/galaxy5200.h index 4be28b26a6..44669ea44d 100644 --- a/include/configs/galaxy5200.h +++ b/include/configs/galaxy5200.h @@ -141,7 +141,7 @@ #define CONFIG_SYS_FLASH_BASE 0xfe000000 /* - * The flash size is autoconfigured, but cpu/mpc5xxx/cpu_init.c needs this + * The flash size is autoconfigured, but arch/ppc/cpu/mpc5xxx/cpu_init.c needs this * variable defined */ #define CONFIG_SYS_FLASH_SIZE 0x02000000 diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h index a79feec16d..e5537da4af 100644 --- a/include/configs/kilauea.h +++ b/include/configs/kilauea.h @@ -230,7 +230,7 @@ * SDRAM Controller DDR autocalibration values and takes a lot longer * to run than Method_B. * (See the Method_A and Method_B algorithm discription in the file: - * cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c) + * arch/ppc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c) * Define CONFIG_PPC4xx_DDR_METHOD_A to use DDR autocalibration Method_A * * DDR Autocalibration Method_B is the default. diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h index 16b464cf6d..3958d09eb9 100644 --- a/include/configs/linkstation.h +++ b/include/configs/linkstation.h @@ -290,7 +290,7 @@ * taken from the orignal Linkstation boot code * * Most of the low level configuration setttings are normally used - * in cpu/mpc824x/cpu_init.c which is NOT used by this implementation. + * in arch/ppc/cpu/mpc824x/cpu_init.c which is NOT used by this implementation. * Low level initialisation is done in board/linkstation/early_init.S * The values below are included for reference purpose only */ diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h index 403837e14b..2472187520 100644 --- a/include/configs/quad100hd.h +++ b/include/configs/quad100hd.h @@ -233,7 +233,7 @@ * Definitions for initial stack pointer and data area (in data cache) */ /* use on chip memory (OCM) for temperary stack until sdram is tested */ -/* see ./cpu/ppc4xx/start.S */ +/* see ./arch/ppc/cpu/ppc4xx/start.S */ #define CONFIG_SYS_TEMP_STACK_OCM 1 /* On Chip Memory location */ @@ -251,7 +251,7 @@ * Taken from PPCBoot board/icecube/icecube.h */ -/* see ./cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/ndfc.c */ +/* see ./arch/ppc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/ndfc.c */ #define CONFIG_SYS_EBC_PB0AP 0x04002480 /* AMD NOR flash - this corresponds to FLASH_BASE so may be correct */ #define CONFIG_SYS_EBC_PB0CR 0xFFC5A000 @@ -269,7 +269,7 @@ * * Taken in part from PPCBoot board/icecube/icecube.h */ -/* see ./cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/start.S */ +/* see ./arch/ppc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/start.S */ #define CONFIG_SYS_GPIO0_OSRH 0x55555550 #define CONFIG_SYS_GPIO0_OSRL 0x00000110 #define CONFIG_SYS_GPIO0_ISR1H 0x00000000 diff --git a/include/configs/sc3.h b/include/configs/sc3.h index d00f2480cb..7423663a26 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -456,7 +456,7 @@ * - internal SRAM (OCM=On Chip Memory) is placed to CONFIG_SYS_OCM_DATA_ADDR * - Stackpointer will be located to * (CONFIG_SYS_INIT_RAM_ADDR&0xFFFF0000) | (CONFIG_SYS_INIT_SP_OFFSET&0x0000FFFF) - * in cpu/ppc4xx/start.S + * in arch/ppc/cpu/ppc4xx/start.S */ #undef CONFIG_SYS_INIT_DCACHE_CS @@ -495,7 +495,7 @@ #define BOOTFLAG_WARM 0x02 /* Software reboot */ /* ################################################################################### */ -/* These defines will be used in cpu/ppc4xx/cpu_init.c to setup external chip selects */ +/* These defines will be used in arch/ppc/cpu/ppc4xx/cpu_init.c to setup external chip selects */ /* They are currently undefined cause they are initiaized in board/solidcard3/init.S */ /* This chip select accesses the boot device */ |
