diff options
Diffstat (limited to 'include/configs/modnet50.h')
| -rw-r--r-- | include/configs/modnet50.h | 196 |
1 files changed, 0 insertions, 196 deletions
diff --git a/include/configs/modnet50.h b/include/configs/modnet50.h deleted file mode 100644 index 57707f38e6..0000000000 --- a/include/configs/modnet50.h +++ /dev/null @@ -1,196 +0,0 @@ -/* - * (C) Copyright 2004 - * IMMS, gGmbH <www.imms.de> - * Thomas Elste <info@elste.org> - * - * Configuation settings for ModNET50 board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_ARM7 1 /* This is a ARM7 CPU */ -#define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */ -#define CONFIG_NETARM /* it's a Netsiclicon NET+ARM */ -#undef CONFIG_NETARM_NET40_REV2 /* it's a Net+40 Rev. 2 */ -#undef CONFIG_NETARM_NET40_REV4 /* it's a Net+40 Rev. 4 */ -#define CONFIG_NETARM_NET50 /* it's a Net+50 */ - -#define CONFIG_MODNET50 1 /* on an ModNET50 Board */ - -#undef CONFIG_USE_IRQ /* don't need them anymore */ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ -#define CONFIG_DRIVER_NETARMETH 1 - -/* - * select serial console configuration - */ -#define CONFIG_NETARM_SERIAL -#define CONFIG_SERIAL1 1 /* we use Serial line 1 */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 38400 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_JFFS2 - - -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.30.2 -#define CONFIG_SERVERIP 192.168.30.122 -#define CONFIG_SYS_ETH_PHY_ADDR 0x100 -#define CONFIG_CMDLINE_TAG /* submit bootargs to kernel */ - -/*#define CONFIG_BOOTDELAY 10*/ -/* args and cmd for uClinux-image @ 0x10020000, ramdisk-image @ 0x100a0000 */ -#define CONFIG_BOOTCOMMAND "bootm 0x10020000 0x100a0000" -#define CONFIG_BOOTARGS "console=ttyS0,38400 initrd=0x100a0040,530K " \ - "root=/dev/ram keepinitrd" - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "modnet50 # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x00500000 /* default load address */ - -#define CONFIG_SYS_HZ 900 /* decrementer freq: 2 kHz */ - - /* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below -*/ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks of DRAM */ -#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */ -#define PHYS_SDRAM_2 0x01000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_2_SIZE 0x01000000 /* 16 MB */ - -#define PHYS_FLASH_1 0x10000000 /* Flash Bank #1 */ -#define PHYS_FLASH_1_SIZE 0x00200000 /* 2 MB (one chip only, 16bit access) */ - -#define PHYS_FLASH_2 0x10200001 -#define PHYS_FLASH_2_SIZE 0x00200000 - -#define CONFIG_NETARM_EEPROM -/* #ifdef CONFIG_NETARM_EEPROM */ -#define PHYS_NVRAM_1 0x20000000 /* EEPROM Bank #1 */ -#define PHYS_NVRAM_SIZE 0x00002000 /* 8 KB */ -/* #endif */ - -#define PHYS_EXT_1 0x30000000 /* Extensions Bank #1 */ -#define PHYS_EXT_SIZE 0x01000000 /* 32 MB memory mapped I/O */ - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_FLASH_SIZE PHYS_FLASH_1_SIZE - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 35 /* max number of sectors on one chip */ -#define CONFIG_SYS_MAIN_SECT_SIZE 0x00010000 /* main size of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -/* environment settings */ -#define CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_NOWHERE - -#define CONFIG_ENV_ADDR 0x1001C000 /* environment start address */ -#define CONFIG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ -#define CONFIG_ENV_SIZE 0x4000 /* max size for environment */ - -/* - * JFFS2 partitions - * - */ -/* No command line, one static partition, whole device */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00080000 - -/* mtdparts command line support */ -/* Note: fake mtd_id used, no linux mtd map file */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nor0=modnet50-0" -#define MTDPARTS_DEFAULT "mtdparts=modnet50-0:-@512k(jffs2)" -*/ - -#endif /* __CONFIG_H */ |
