diff options
Diffstat (limited to 'include/configs/ea20.h')
| -rw-r--r-- | include/configs/ea20.h | 126 |
1 files changed, 121 insertions, 5 deletions
diff --git a/include/configs/ea20.h b/include/configs/ea20.h index 201e6b570b..74fec3f8b5 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -28,7 +28,12 @@ */ #define CONFIG_DRIVER_TI_EMAC #define CONFIG_USE_SPIFLASH +#define CONFIG_SYS_USE_NAND #define CONFIG_DRIVER_TI_EMAC_USE_RMII +#define CONFIG_BOARD_EARLY_INIT_F +#define BOARD_LATE_INIT +#define CONFIG_VIDEO +#define CONFIG_PREBOOT /* * SoC Configuration @@ -47,7 +52,7 @@ /* * Memory Info */ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */ +#define CONFIG_SYS_MALLOC_LEN (0x10000 + 4*1024*1024) /* malloc() len */ #define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ #define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ @@ -67,7 +72,7 @@ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ -#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */ +#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE /* Base address of UART0 */ #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ @@ -83,6 +88,13 @@ #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED /* + * I2C Configuration + */ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_DAVINCI_I2C +#define CONFIG_SYS_I2C_SPEED 100000 + +/* * Network & Ethernet Configuration */ #ifdef CONFIG_DRIVER_TI_EMAC @@ -99,11 +111,22 @@ #undef CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SIZE (8 << 10) -#define CONFIG_ENV_OFFSET (256 << 10) +#define CONFIG_ENV_OFFSET 0x80000 #define CONFIG_ENV_SECT_SIZE (64 << 10) #define CONFIG_SYS_NO_FLASH #endif + +#if defined(CONFIG_VIDEO) +#define CONFIG_VIDEO_DA8XX +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SPLASH_SCREEN +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_CMD_BMP +#endif + /* * U-Boot general configuration */ @@ -143,6 +166,7 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_SAVES #define CONFIG_CMD_MEMORY +#define CONFIG_CMD_I2C #ifndef CONFIG_DRIVER_TI_EMAC #undef CONFIG_CMD_NET @@ -151,7 +175,8 @@ #undef CONFIG_CMD_PING #endif -#ifdef CONFIG_USE_NAND +/* NAND Setup */ +#ifdef CONFIG_SYS_USE_NAND #undef CONFIG_CMD_FLASH #undef CONFIG_CMD_IMLS #define CONFIG_CMD_NAND @@ -163,8 +188,20 @@ #define CONFIG_RBTREE #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS + +#define CONFIG_NAND_DAVINCI +#define CONFIG_SYS_NAND_PAGE_2K +#define CONFIG_SYS_NAND_CS 2 +#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE +#undef CONFIG_SYS_NAND_HW_ECC +#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST +#define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_MAX_CHIPS 1 +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif +/* SPI Flash */ #ifdef CONFIG_USE_SPIFLASH #undef CONFIG_CMD_IMLS #undef CONFIG_CMD_FLASH @@ -173,7 +210,7 @@ #define CONFIG_CMD_SAVEENV #endif -#if !defined(CONFIG_USE_NAND) && \ +#if !defined(CONFIG_SYS_USE_NAND) && \ !defined(CONFIG_USE_NOR) && \ !defined(CONFIG_USE_SPIFLASH) #define CONFIG_ENV_IS_NOWHERE @@ -187,4 +224,83 @@ #define CONFIG_SYS_SDRAM_BASE 0xc0000000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ GENERATED_GBL_DATA_SIZE) +/* + * Default environment and default scripts + * to update uboot and load kernel + */ +#define xstr(s) str(s) +#define str(s) #s + + +#define CONFIG_HOSTNAME ea20 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "as=3\0" \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "rfsbargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rfsbpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "mtdids=nand0=davinci_nand.0\0" \ + "mtdparts=mtdparts=davinci_nand.0:8m(Settings),8m(aKernel)," \ + "8m(bKernel),76m(aRootfs),76m(bRootfs),-(MassSD)\0" \ + "nandargs=setenv bootargs rootfstype=ubifs ro chk_data_crc " \ + "ubi.mtd=${as} root=ubi0:rootfs\0" \ + "addip_sta=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ + "addip=if test -n ${ipdyn};then run addip_dyn;" \ + "else run addip_sta;fi\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "addtty=setenv bootargs ${bootargs}" \ + " console=${consoledev},${baudrate}n8\0" \ + "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ + "addmem=setenv bootargs ${bootargs} mem=${memory}\0" \ + "consoledev=ttyS0\0" \ + "loadaddr=c0000014\0" \ + "memory=32M\0" \ + "kernel_addr_r=c0700000\0" \ + "hostname=" xstr(CONFIG_HOSTNAME) "\0" \ + "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \ + "ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0" \ + "flash_self=run ramargs addip addtty addmtd addmisc addmem;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "flash_nfs=run nfsargs addip addtty addmtd addmisc addmem;" \ + "bootm ${kernel_addr}\0" \ + "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ + "run nfsargs addip addtty addmtd addmisc addmem;" \ + "bootm ${kernel_addr_r}\0" \ + "net_rfsb=tftp ${kernel_addr_r} ${bootfile}; " \ + "run rfsbargs addip addtty addmtd addmisc addmem; " \ + "bootm ${kernel_addr_r}\0" \ + "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \ + "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \ + "nand_nand=ubi part nand0,${as};ubifsmount rootfs;" \ + "ubifsload ${kernel_addr_r} /boot/uImage;" \ + "ubifsumount; run nandargs addip addtty " \ + "addmtd addmisc addmem;bootm ${kernel_addr_r}\0" \ + "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \ + "load_magic=if sf probe 0;then sf " \ + "read c0000000 0x10000 0x60000;fi\0" \ + "load_nand=ubi part nand0,${as};ubifsmount rootfs;" \ + "if ubifsload c0000014 /boot/u-boot.bin;" \ + "then mw c0000008 ${filesize};else echo Error reading " \ + "u-boot from nand!;fi\0" \ + "load_net=if sf probe 0;then sf read c0000000 0x10000 0x60000;" \ + "tftp c0000014 ${u-boot};" \ + "mw c0000008 ${filesize};" \ + "fi\0" \ + "upd=if sf probe 0;then sf erase 10000 60000;" \ + "sf write c0000000 10000 60000;" \ + "fi\0" \ + "ubootupd_net=if run load_net;then echo Updating u-boot;" \ + "if run upd; then echo U-Boot updated;" \ + "else echo Error updating u-boot !;" \ + "echo Board without bootloader !!;" \ + "fi;" \ + "else echo U-Boot not downloaded..exiting;fi\0" \ + "ubootupd_nand=echo run load_magic,run load_nand,run upd;\0" \ + "bootcmd=run net_nfs\0" + #endif /* __CONFIG_H */ |
