diff options
Diffstat (limited to 'include/configs/canyonlands.h')
| -rw-r--r-- | include/configs/canyonlands.h | 49 |
1 files changed, 29 insertions, 20 deletions
diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index be9432b4cd..3dd577aae7 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -141,6 +141,9 @@ * On 440EPx the SPL is copied to SDRAM before the NAND controller is * set up. While still running from cache, I experienced problems accessing * the NAND controller. sr - 2006-08-25 + * + * This is the first official implementation of booting from 2k page sized + * NAND devices (e.g. Micron 29F2G08AA 256Mbit * 8) */ #define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */ #define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */ @@ -153,24 +156,27 @@ /* * Define the partitioning of the NAND chip (only RAM U-Boot is needed here) */ -#define CFG_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */ -#define CFG_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */ +#define CFG_NAND_U_BOOT_OFFS (128 << 10) /* Offset to RAM U-Boot image */ +#define CFG_NAND_U_BOOT_SIZE (1 << 20) /* Size of RAM U-Boot image */ /* * Now the NAND chip has to be defined (no autodetection used!) */ -#define CFG_NAND_PAGE_SIZE 512 /* NAND chip page size */ -#define CFG_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */ -#define CFG_NAND_PAGE_COUNT 32 /* NAND chip page count */ -#define CFG_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */ -#undef CFG_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */ +#define CFG_NAND_PAGE_SIZE (2 << 10) /* NAND chip page size */ +#define CFG_NAND_BLOCK_SIZE (128 << 10) /* NAND chip block size */ +#define CFG_NAND_PAGE_COUNT (CFG_NAND_BLOCK_SIZE / CFG_NAND_PAGE_SIZE) + /* NAND chip page count */ +#define CFG_NAND_BAD_BLOCK_POS 0 /* Location of bad block marker*/ +#define CFG_NAND_5_ADDR_CYCLE /* Fifth addr used (<=128MB) */ #define CFG_NAND_ECCSIZE 256 #define CFG_NAND_ECCBYTES 3 #define CFG_NAND_ECCSTEPS (CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE) -#define CFG_NAND_OOBSIZE 16 +#define CFG_NAND_OOBSIZE 64 #define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS) -#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7} +#define CFG_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47, \ + 48, 49, 50, 51, 52, 53, 54, 55, \ + 56, 57, 58, 59, 60, 61, 62, 63} #ifdef CFG_ENV_IS_IN_NAND /* @@ -231,7 +237,7 @@ #define CONFIG_DDR_ECC 1 /* with ECC support */ #define CONFIG_DDR_RQDC_FIXED 0x80000038 /* fixed value for RQDC */ #endif -#define CFG_MBYTES_SDRAM 256 /* 256MB */ +#define CFG_MBYTES_SDRAM 512 /* 512MB */ /*----------------------------------------------------------------------- * I2C @@ -313,15 +319,18 @@ #define CONFIG_HOSTNAME canyonlands #define CFG_BOOTFILE "bootfile=canyonlands/uImage\0" #define CFG_DTBFILE "fdt_file=canyonlands/canyonlands.dtb\0" +#define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xxFP\0" #else #define CONFIG_HOSTNAME glacier #define CFG_BOOTFILE "bootfile=glacier/uImage\0" #define CFG_DTBFILE "fdt_file=glacier/glacier.dtb\0" +#define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xx\0" #endif #define CONFIG_EXTRA_ENV_SETTINGS \ CFG_BOOTFILE \ CFG_DTBFILE \ + CFG_ROOTPATH \ "netdev=eth0\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ @@ -330,18 +339,18 @@ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}:${netdev}:off panic=1\0" \ "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ - "net_nfs=tftp 400000 ${bootfile};" \ - "tftp ${fdt_addr} ${fdt_file};" \ - "run nfsargs addip addtty;" \ - "bootm 400000 - ${fdt_addr}\0" \ - "net_nfs_fdt=net_nfs\0" \ - "flash_nfs=run nfsargs addip addtty;" \ - "bootm ${kernel_addr}\0" \ "flash_self=run ramargs addip addtty;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "rootpath=/opt/eldk/ppc_4xxFP\0" \ - "fdt_addr=800000\0" \ + "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr} - ${fdt_addr}\0" \ + "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ + "tftp ${fdt_addr_r} ${fdt_file}; " \ + "run nfsargs addip addtty;" \ + "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ + "kernel_addr_r=400000\0" \ + "fdt_addr_r=800000\0" \ "kernel_addr=fc000000\0" \ + "fdt_addr=fc1e0000\0" \ "ramdisk_addr=fc200000\0" \ "initrd_high=30000000\0" \ "load=tftp 200000 ${hostname}/u-boot.bin\0" \ |
