diff options
Diffstat (limited to 'include/asm-blackfin/mach-common/bits/usb.h')
| -rw-r--r-- | include/asm-blackfin/mach-common/bits/usb.h | 264 |
1 files changed, 0 insertions, 264 deletions
diff --git a/include/asm-blackfin/mach-common/bits/usb.h b/include/asm-blackfin/mach-common/bits/usb.h deleted file mode 100644 index c6390589bc..0000000000 --- a/include/asm-blackfin/mach-common/bits/usb.h +++ /dev/null @@ -1,264 +0,0 @@ -/* - * USB Masks - */ - -#ifndef __BFIN_PERIPHERAL_USB__ -#define __BFIN_PERIPHERAL_USB__ - -/* Bit masks for USB_FADDR */ - -#define FUNCTION_ADDRESS 0x7f /* Function address */ - -/* Bit masks for USB_POWER */ - -#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ -#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ -#define RESUME_MODE 0x4 /* DMA Mode */ -#define RESET 0x8 /* Reset indicator */ -#define HS_MODE 0x10 /* High Speed mode indicator */ -#define HS_ENABLE 0x20 /* high Speed Enable */ -#define SOFT_CONN 0x40 /* Soft connect */ -#define ISO_UPDATE 0x80 /* Isochronous update */ - -/* Bit masks for USB_INTRTX */ - -#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ -#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ -#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ -#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ -#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ -#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ -#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ -#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ - -/* Bit masks for USB_INTRRX */ - -#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ -#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ -#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ -#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ -#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ -#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ -#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ - -/* Bit masks for USB_INTRTXE */ - -#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ -#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt enable */ -#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt enable */ -#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt enable */ -#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt enable */ -#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt enable */ -#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt enable */ -#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt enable */ - -/* Bit masks for USB_INTRRXE */ - -#define EP1_RX_E 0x02 /* Rx Endpoint 1 interrupt enable */ -#define EP2_RX_E 0x04 /* Rx Endpoint 2 interrupt enable */ -#define EP3_RX_E 0x08 /* Rx Endpoint 3 interrupt enable */ -#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt enable */ -#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt enable */ -#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt enable */ -#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt enable */ - -/* Bit masks for USB_INTRUSB */ - -#define SUSPEND_B 0x01 /* Suspend indicator */ -#define RESUME_B 0x02 /* Resume indicator */ -#define RESET_OR_BABLE_B 0x04 /* Reset/babble indicator */ -#define SOF_B 0x08 /* Start of frame */ -#define CONN_B 0x10 /* Connection indicator */ -#define DISCON_B 0x20 /* Disconnect indicator */ -#define SESSION_REQ_B 0x40 /* Session Request */ -#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ - -/* Bit masks for USB_INTRUSBE */ - -#define SUSPEND_BE 0x01 /* Suspend indicator int enable */ -#define RESUME_BE 0x02 /* Resume indicator int enable */ -#define RESET_OR_BABLE_BE 0x04 /* Reset/babble indicator int enable */ -#define SOF_BE 0x08 /* Start of frame int enable */ -#define CONN_BE 0x10 /* Connection indicator int enable */ -#define DISCON_BE 0x20 /* Disconnect indicator int enable */ -#define SESSION_REQ_BE 0x40 /* Session Request int enable */ -#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ - -/* Bit masks for USB_FRAME */ - -#define FRAME_NUMBER 0x7ff /* Frame number */ - -/* Bit masks for USB_INDEX */ - -#define SELECTED_ENDPOINT 0xf /* selected endpoint */ - -/* Bit masks for USB_GLOBAL_CTL */ - -#define GLOBAL_ENA 0x0001 /* enables USB module */ -#define EP1_TX_ENA 0x0002 /* Transmit endpoint 1 enable */ -#define EP2_TX_ENA 0x0004 /* Transmit endpoint 2 enable */ -#define EP3_TX_ENA 0x0008 /* Transmit endpoint 3 enable */ -#define EP4_TX_ENA 0x0010 /* Transmit endpoint 4 enable */ -#define EP5_TX_ENA 0x0020 /* Transmit endpoint 5 enable */ -#define EP6_TX_ENA 0x0040 /* Transmit endpoint 6 enable */ -#define EP7_TX_ENA 0x0080 /* Transmit endpoint 7 enable */ -#define EP1_RX_ENA 0x0100 /* Receive endpoint 1 enable */ -#define EP2_RX_ENA 0x0200 /* Receive endpoint 2 enable */ -#define EP3_RX_ENA 0x0400 /* Receive endpoint 3 enable */ -#define EP4_RX_ENA 0x0800 /* Receive endpoint 4 enable */ -#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ -#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ -#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ - -/* Bit masks for USB_OTG_DEV_CTL */ - -#define SESSION 0x1 /* session indicator */ -#define HOST_REQ 0x2 /* Host negotiation request */ -#define HOST_MODE 0x4 /* indicates USBDRC is a host */ -#define VBUS0 0x8 /* Vbus level indicator[0] */ -#define VBUS1 0x10 /* Vbus level indicator[1] */ -#define LSDEV 0x20 /* Low-speed indicator */ -#define FSDEV 0x40 /* Full or High-speed indicator */ -#define B_DEVICE 0x80 /* A' or 'B' device indicator */ - -/* Bit masks for USB_OTG_VBUS_IRQ */ - -#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ -#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ -#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ -#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ -#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ -#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ - -/* Bit masks for USB_OTG_VBUS_MASK */ - -#define DRIVE_VBUS_ON_ENA 0x01 /* enable DRIVE_VBUS_ON interrupt */ -#define DRIVE_VBUS_OFF_ENA 0x02 /* enable DRIVE_VBUS_OFF interrupt */ -#define CHRG_VBUS_START_ENA 0x04 /* enable CHRG_VBUS_START interrupt */ -#define CHRG_VBUS_END_ENA 0x08 /* enable CHRG_VBUS_END interrupt */ -#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ -#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ - -/* Bit masks for USB_CSR0 */ - -#define RXPKTRDY 0x1 /* data packet receive indicator */ -#define TXPKTRDY 0x2 /* data packet in FIFO indicator */ -#define STALL_SENT 0x4 /* STALL handshake sent */ -#define DATAEND 0x8 /* Data end indicator */ -#define SETUPEND 0x10 /* Setup end */ -#define SENDSTALL 0x20 /* Send STALL handshake */ -#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ -#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ -#define FLUSHFIFO 0x100 /* flush endpoint FIFO */ -#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ -#define SETUPPKT_H 0x8 /* send Setup token host mode */ -#define ERROR_H 0x10 /* timeout error indicator host mode */ -#define REQPKT_H 0x20 /* Request an IN transaction host mode */ -#define STATUSPKT_H 0x40 /* Status stage transaction host mode */ -#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ - -/* Bit masks for USB_COUNT0 */ - -#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */ - -/* Bit masks for USB_NAKLIMIT0 */ - -#define EP0_NAK_LIMIT 0x1f /* frames/micro frames count after which EP0 timeouts */ - -/* Bit masks for USB_TX_MAX_PACKET */ - -#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */ - -/* Bit masks for USB_RX_MAX_PACKET */ - -#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */ - -/* Bit masks for USB_TXCSR */ - -#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ -#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ -#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ -#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ -#define STALL_SEND_T 0x10 /* issue a Stall handshake */ -#define STALL_SENT_T 0x20 /* Stall handshake transmitted */ -#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ -#define INCOMPTX_T 0x80 /* indicates that a large packet is split */ -#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ -#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ -#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ -#define ISO_T 0x4000 /* enable Isochronous transfers */ -#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ -#define ERROR_TH 0x4 /* error condition host mode */ -#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ -#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ - -/* Bit masks for USB_TXCOUNT */ - -#define TX_COUNT 0x1fff /* Byte len for the selected endpoint Tx FIFO */ - -/* Bit masks for USB_RXCSR */ - -#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ -#define FIFO_FULL_R 0x2 /* FIFO not empty */ -#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ -#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ -#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ -#define STALL_SEND_R 0x20 /* issue a Stall handshake */ -#define STALL_SENT_R 0x40 /* Stall handshake transmitted */ -#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ -#define INCOMPRX_R 0x100 /* indicates that a large packet is split */ -#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ -#define DISNYET_R 0x1000 /* disable Nyet handshakes */ -#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ -#define ISO_R 0x4000 /* enable Isochronous transfers */ -#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ -#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ -#define REQPKT_RH 0x20 /* request an IN transaction host mode */ -#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ -#define INCOMPRX_RH 0x100 /* large packet is split host mode */ -#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ -#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ - -/* Bit masks for USB_RXCOUNT */ - -#define RX_COUNT 0x1fff /* Packet byte len in the Rx FIFO */ - -/* Bit masks for USB_TXTYPE */ - -#define TARGET_EP_NO_T 0xf /* EP number */ -#define PROTOCOL_T 0xc /* transfer type */ - -/* Bit masks for USB_TXINTERVAL */ - -#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */ - -/* Bit masks for USB_RXTYPE */ - -#define TARGET_EP_NO_R 0xf /* EP number */ -#define PROTOCOL_R 0xc /* transfer type */ - -/* Bit masks for USB_RXINTERVAL */ - -#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */ - -/* Bit masks for USB_DMA_INTERRUPT */ - -#define DMA0_INT 0x1 /* DMA0 pending interrupt */ -#define DMA1_INT 0x2 /* DMA1 pending interrupt */ -#define DMA2_INT 0x4 /* DMA2 pending interrupt */ -#define DMA3_INT 0x8 /* DMA3 pending interrupt */ -#define DMA4_INT 0x10 /* DMA4 pending interrupt */ -#define DMA5_INT 0x20 /* DMA5 pending interrupt */ -#define DMA6_INT 0x40 /* DMA6 pending interrupt */ -#define DMA7_INT 0x80 /* DMA7 pending interrupt */ - -/* Bit masks for USB_DMAxCONTROL */ - -#define DMA_ENA 0x1 /* DMA enable */ -#define DIRECTION 0x2 /* direction of DMA transfer */ -#define MODE 0x4 /* DMA Bus error */ -#define INT_ENA 0x8 /* Interrupt enable */ -#define EPNUM 0xf0 /* EP number */ -#define BUSERROR 0x100 /* DMA Bus error */ - -#endif |
