diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/i2c/fsl_i2c.c | 18 | ||||
| -rw-r--r-- | drivers/mmc/atmel_mci.c | 16 | ||||
| -rw-r--r-- | drivers/mtd/cfi_flash.c | 5 | ||||
| -rw-r--r-- | drivers/mtd/spi/atmel.c | 6 | ||||
| -rw-r--r-- | drivers/net/e1000.c | 13 | ||||
| -rw-r--r-- | drivers/serial/Makefile | 12 | ||||
| -rw-r--r-- | drivers/serial/atmel_usart.c | 3 | ||||
| -rw-r--r-- | drivers/serial/mcfuart.c | 3 | ||||
| -rw-r--r-- | drivers/serial/s3c4510b_uart.c | 4 | ||||
| -rw-r--r-- | drivers/serial/serial_max3100.c | 4 | ||||
| -rw-r--r-- | drivers/serial/serial_xuartlite.c | 18 | ||||
| -rw-r--r-- | drivers/serial/usbtty.c | 5 | ||||
| -rw-r--r-- | drivers/usb/usbdcore.c | 2 | ||||
| -rw-r--r-- | drivers/video/atmel_lcdfb.c | 4 |
14 files changed, 58 insertions, 55 deletions
diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c index 9f2c1eced4..3f78e2f5c8 100644 --- a/drivers/i2c/fsl_i2c.c +++ b/drivers/i2c/fsl_i2c.c @@ -143,12 +143,15 @@ void i2c_init(int speed, int slaveadd) { struct fsl_i2c *dev; + unsigned int temp; dev = (struct fsl_i2c *) (CFG_IMMR + CFG_I2C_OFFSET); writeb(0, &dev->cr); /* stop I2C controller */ udelay(5); /* let it shutdown in peace */ - i2c_bus_speed[0] = set_i2c_bus_speed(dev, gd->i2c1_clk, speed); + temp = set_i2c_bus_speed(dev, gd->i2c1_clk, speed); + if (gd->flags & GD_FLG_RELOC) + i2c_bus_speed[0] = temp; writeb(slaveadd << 1, &dev->adr); /* write slave address */ writeb(0x0, &dev->sr); /* clear status register */ writeb(I2C_CR_MEN, &dev->cr); /* start I2C controller */ @@ -158,7 +161,9 @@ i2c_init(int speed, int slaveadd) writeb(0, &dev->cr); /* stop I2C controller */ udelay(5); /* let it shutdown in peace */ - i2c_bus_speed[1] = set_i2c_bus_speed(dev, gd->i2c2_clk, speed); + temp = set_i2c_bus_speed(dev, gd->i2c2_clk, speed); + if (gd->flags & GD_FLG_RELOC) + i2c_bus_speed[1] = temp; writeb(slaveadd << 1, &dev->adr); /* write slave address */ writeb(0x0, &dev->sr); /* clear status register */ writeb(I2C_CR_MEN, &dev->cr); /* start I2C controller */ @@ -168,12 +173,11 @@ i2c_init(int speed, int slaveadd) static __inline__ int i2c_wait4bus(void) { - ulong timeval = get_timer(0); + unsigned long long timeval = get_ticks(); while (readb(&i2c_dev[i2c_bus_num]->sr) & I2C_SR_MBB) { - if (get_timer(timeval) > I2C_TIMEOUT) { + if ((get_ticks() - timeval) > usec2ticks(I2C_TIMEOUT)) return -1; - } } return 0; @@ -183,7 +187,7 @@ static __inline__ int i2c_wait(int write) { u32 csr; - ulong timeval = get_timer(0); + unsigned long long timeval = get_ticks(); do { csr = readb(&i2c_dev[i2c_bus_num]->sr); @@ -208,7 +212,7 @@ i2c_wait(int write) } return 0; - } while (get_timer (timeval) < I2C_TIMEOUT); + } while ((get_ticks() - timeval) < usec2ticks(I2C_TIMEOUT)); debug("i2c_wait: timed out\n"); return -1; diff --git a/drivers/mmc/atmel_mci.c b/drivers/mmc/atmel_mci.c index 61aa1849c2..a151488d12 100644 --- a/drivers/mmc/atmel_mci.c +++ b/drivers/mmc/atmel_mci.c @@ -135,10 +135,10 @@ mmc_cmd(unsigned long cmd, unsigned long arg, status = mmci_readl(SR); } while (!(status & MMCI_BIT(CMDRDY))); - pr_debug("mmc: status 0x%08lx\n", status); + pr_debug("mmc: status 0x%08x\n", status); if (status & error_flags) { - printf("mmc: command %lu failed (status: 0x%08lx)\n", + printf("mmc: command %lu failed (status: 0x%08x)\n", cmd, status); return -EIO; } @@ -245,7 +245,7 @@ out: read_error: mmc_cmd(MMC_CMD_SEND_STATUS, mmc_rca << 16, &card_status, R1 | NCR); - printf("mmc: bread failed, status = %08x, card status = %08x\n", + printf("mmc: bread failed, status = %08x, card status = %08lx\n", status, card_status); goto out; } @@ -284,13 +284,13 @@ static void sd_parse_cid(struct mmc_cid *cid, unsigned long *resp) static void mmc_dump_cid(const struct mmc_cid *cid) { - printf("Manufacturer ID: %02lX\n", cid->mid); - printf("OEM/Application ID: %04lX\n", cid->oid); + printf("Manufacturer ID: %02X\n", cid->mid); + printf("OEM/Application ID: %04X\n", cid->oid); printf("Product name: %s\n", cid->pnm); - printf("Product Revision: %lu.%lu\n", + printf("Product Revision: %u.%u\n", cid->prv >> 4, cid->prv & 0x0f); printf("Product Serial Number: %lu\n", cid->psn); - printf("Manufacturing Date: %02lu/%02lu\n", + printf("Manufacturing Date: %02u/%02u\n", cid->mdt >> 4, cid->mdt & 0x0f); } @@ -501,7 +501,7 @@ int mmc_init(int verbose) mmc_blkdev.part_type = PART_TYPE_DOS; mmc_blkdev.block_read = mmc_bread; sprintf((char *)mmc_blkdev.vendor, - "Man %02x%04x Snr %08x", + "Man %02x%04x Snr %08lx", cid.mid, cid.oid, cid.psn); strncpy((char *)mmc_blkdev.product, cid.pnm, sizeof(mmc_blkdev.product)); diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index 4340b1b5c7..12647ef986 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -306,6 +306,9 @@ static void flash_make_cmd(flash_info_t *info, u32 cmd, void *cmdbuf) int i; int cword_offset; int cp_offset; +#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA) + u32 cmd_le = cpu_to_le32(cmd); +#endif uchar val; uchar *cp = (uchar *) cmdbuf; @@ -313,7 +316,7 @@ static void flash_make_cmd(flash_info_t *info, u32 cmd, void *cmdbuf) cword_offset = (info->portwidth-i)%info->chipwidth; #if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA) cp_offset = info->portwidth - i; - val = *((uchar*)&cmd + cword_offset); + val = *((uchar*)&cmd_le + cword_offset); #else cp_offset = i - 1; val = *((uchar*)&cmd + sizeof(u32) - cword_offset - 1); diff --git a/drivers/mtd/spi/atmel.c b/drivers/mtd/spi/atmel.c index fb7a4a939b..10fcf0cdde 100644 --- a/drivers/mtd/spi/atmel.c +++ b/drivers/mtd/spi/atmel.c @@ -205,7 +205,7 @@ static int dataflash_write_at45(struct spi_flash *flash, byte_addr = 0; } - debug("SF: AT45: Successfully programmed %u bytes @ 0x%x\n", + debug("SF: AT45: Successfully programmed %zu bytes @ 0x%x\n", len, offset); ret = 0; @@ -268,7 +268,7 @@ int dataflash_erase_at45(struct spi_flash *flash, u32 offset, size_t len) page_addr++; } - debug("SF: AT45: Successfully erased %u bytes @ 0x%x\n", + debug("SF: AT45: Successfully erased %zu bytes @ 0x%x\n", len, offset); ret = 0; @@ -351,7 +351,7 @@ struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode) * params->blocks_per_sector * params->nr_sectors; - debug("SF: Detected %s with page size %u, total %u bytes\n", + debug("SF: Detected %s with page size %lu, total %u bytes\n", params->name, page_size, asf->flash.size); return &asf->flash; diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index 060b518996..c8b4e98c66 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -513,9 +513,11 @@ e1000_read_mac_addr(struct eth_device *nic) nic->enetaddr[5] += 1; } #ifdef CONFIG_E1000_FALLBACK_MAC - if ( *(u32*)(nic->enetaddr) == 0 || *(u32*)(nic->enetaddr) == ~0 ) - for ( i=0; i < NODE_ADDRESS_SIZE; i++ ) - nic->enetaddr[i] = (CONFIG_E1000_FALLBACK_MAC >> (8*(5-i))) & 0xff; + if ( *(u32*)(nic->enetaddr) == 0 || *(u32*)(nic->enetaddr) == ~0 ) { + unsigned char fb_mac[NODE_ADDRESS_SIZE] = CONFIG_E1000_FALLBACK_MAC; + + memcpy (nic->enetaddr, fb_mac, NODE_ADDRESS_SIZE); + } #endif #else /* @@ -531,10 +533,9 @@ e1000_read_mac_addr(struct eth_device *nic) DEBUGFUNC(); s = getenv ("ethaddr"); - if (s == NULL){ + if (s == NULL) { return -E1000_ERR_EEPROM; - } - else{ + } else { for(ii = 0; ii < 6; ii++) { nic->enetaddr[ii] = s ? simple_strtoul (s, &e, 16) : 0; if (s){ diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index c9e797e8c0..de6fbab740 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -25,18 +25,18 @@ include $(TOPDIR)/config.mk LIB := $(obj)libserial.a -COBJS-y += atmel_usart.o -COBJS-y += mcfuart.o +COBJS-$(CONFIG_ATMEL_USART) += atmel_usart.o +COBJS-$(CONFIG_MCFUART) += mcfuart.o COBJS-y += ns9750_serial.o COBJS-y += ns16550.o -COBJS-y += s3c4510b_uart.o +COBJS-$(CONFIG_DRIVER_S3C4510_UART) += s3c4510b_uart.o COBJS-y += serial.o -COBJS-y += serial_max3100.o +COBJS-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o COBJS-y += serial_pl010.o COBJS-y += serial_pl011.o -COBJS-y += serial_xuartlite.o +COBJS-$(CONFIG_XILINX_UARTLITE) += serial_xuartlite.o COBJS-y += serial_sh.o -COBJS-y += usbtty.o +COBJS-$(CONFIG_USB_TTY) += usbtty.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c index f35b99730f..f3b146c22d 100644 --- a/drivers/serial/atmel_usart.c +++ b/drivers/serial/atmel_usart.c @@ -17,7 +17,6 @@ */ #include <common.h> -#ifdef CONFIG_ATMEL_USART #include <asm/io.h> #include <asm/arch/clk.h> #include <asm/arch/memory-map.h> @@ -96,5 +95,3 @@ int serial_tstc(void) { return (usart3_readl(CSR) & USART3_BIT(RXRDY)) != 0; } - -#endif /* CONFIG_ATMEL_USART */ diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c index 5eb4f458f8..a1fcd057a4 100644 --- a/drivers/serial/mcfuart.c +++ b/drivers/serial/mcfuart.c @@ -29,8 +29,6 @@ #include <common.h> -#ifdef CONFIG_MCFUART - #include <asm/immap.h> #include <asm/uart.h> @@ -130,4 +128,3 @@ void serial_setbrg(void) uart->ucr = UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED; } -#endif /* CONFIG_MCFUART */ diff --git a/drivers/serial/s3c4510b_uart.c b/drivers/serial/s3c4510b_uart.c index ddcd591f84..aa378e1ac1 100644 --- a/drivers/serial/s3c4510b_uart.c +++ b/drivers/serial/s3c4510b_uart.c @@ -45,8 +45,6 @@ #include <common.h> -#ifdef CONFIG_DRIVER_S3C4510_UART - #include <asm/hardware.h> #include "s3c4510b_uart.h" @@ -212,5 +210,3 @@ void serial_puts (const char *s) uart->m_ctrl.bf.sendBreak = 0; } - -#endif diff --git a/drivers/serial/serial_max3100.c b/drivers/serial/serial_max3100.c index 0611fc1dd4..4abc27109b 100644 --- a/drivers/serial/serial_max3100.c +++ b/drivers/serial/serial_max3100.c @@ -26,8 +26,6 @@ #include <common.h> #include <watchdog.h> -#ifdef CONFIG_MAX3100_SERIAL - DECLARE_GLOBAL_DATA_PTR; /**************************************************************/ @@ -298,5 +296,3 @@ int serial_tstc(void) void serial_setbrg(void) { } - -#endif diff --git a/drivers/serial/serial_xuartlite.c b/drivers/serial/serial_xuartlite.c index 61e68873eb..ef6371e66e 100644 --- a/drivers/serial/serial_xuartlite.c +++ b/drivers/serial/serial_xuartlite.c @@ -27,8 +27,6 @@ #include <config.h> #include <asm/io.h> -#ifdef CONFIG_XILINX_UARTLITE - #define RX_FIFO_OFFSET 0 /* receive FIFO, read only */ #define TX_FIFO_OFFSET 4 /* transmit FIFO, write only */ #define STATUS_REG_OFFSET 8 /* status register, read only */ @@ -56,8 +54,13 @@ void serial_putc(const char c) { if (c == '\n') serial_putc('\r'); +<<<<<<< .merge_file_kaofiJ while (in_be32((void *)UARTLITE_STATUS) & SR_TX_FIFO_FULL); out_be32((void *)UARTLITE_TX_FIFO, (unsigned char) (c & 0xff)); +======= + while (in_be32((u32 *) UARTLITE_STATUS) & SR_TX_FIFO_FULL); + out_be32((u32 *) UARTLITE_TX_FIFO, (unsigned char) (c & 0xff)); +>>>>>>> .merge_file_zSz9BG } void serial_puts(const char * s) @@ -69,13 +72,20 @@ void serial_puts(const char * s) int serial_getc(void) { +<<<<<<< .merge_file_kaofiJ while (!(in_be32((void *)UARTLITE_STATUS) & SR_RX_FIFO_VALID_DATA)); return in_be32((void *)UARTLITE_RX_FIFO) & 0xff; +======= + while (!(in_be32((u32 *) UARTLITE_STATUS) & SR_RX_FIFO_VALID_DATA)); + return in_be32((u32 *) UARTLITE_RX_FIFO) & 0xff; +>>>>>>> .merge_file_zSz9BG } int serial_tstc(void) { +<<<<<<< .merge_file_kaofiJ return (in_be32((void *)UARTLITE_STATUS) & SR_RX_FIFO_VALID_DATA); +======= + return (in_be32((u32 *) UARTLITE_STATUS) & SR_RX_FIFO_VALID_DATA); +>>>>>>> .merge_file_zSz9BG } - -#endif /* CONFIG_MICROBLZE */ diff --git a/drivers/serial/usbtty.c b/drivers/serial/usbtty.c index 2bc5c3c838..e738c56271 100644 --- a/drivers/serial/usbtty.c +++ b/drivers/serial/usbtty.c @@ -23,8 +23,6 @@ #include <common.h> -#ifdef CONFIG_USB_TTY - #include <circbuf.h> #include <devices.h> #include "usbtty.h" @@ -1007,6 +1005,3 @@ void usbtty_poll (void) udc_irq(); } - - -#endif diff --git a/drivers/usb/usbdcore.c b/drivers/usb/usbdcore.c index 808da9faa5..53ed669e97 100644 --- a/drivers/usb/usbdcore.c +++ b/drivers/usb/usbdcore.c @@ -552,7 +552,7 @@ struct urb *usbd_alloc_urb (struct usb_device_instance *device, struct urb *urb; if (!(urb = (struct urb *) malloc (sizeof (struct urb)))) { - usberr (" F A T A L: malloc(%u) FAILED!!!!", + usberr (" F A T A L: malloc(%zu) FAILED!!!!", sizeof (struct urb)); return NULL; } diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 27df449660..b332a825e3 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -100,7 +100,11 @@ void lcd_ctrl_init(void *lcdbase) value << ATMEL_LCDC_CLKVAL_OFFSET); /* Initialize control register 2 */ +#ifdef CONFIG_AVR32 + value = ATMEL_LCDC_MEMOR_BIG | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE; +#else value = ATMEL_LCDC_MEMOR_LITTLE | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE; +#endif if (panel_info.vl_tft) value |= ATMEL_LCDC_DISTYPE_TFT; |
