summaryrefslogtreecommitdiffstats
path: root/drivers/serial/serial_pl010.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial/serial_pl010.c')
-rw-r--r--drivers/serial/serial_pl010.c171
1 files changed, 171 insertions, 0 deletions
diff --git a/drivers/serial/serial_pl010.c b/drivers/serial/serial_pl010.c
new file mode 100644
index 0000000000..417b6aeda6
--- /dev/null
+++ b/drivers/serial/serial_pl010.c
@@ -0,0 +1,171 @@
+/*
+ * (C) Copyright 2000
+ * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
+ *
+ * (C) Copyright 2004
+ * ARM Ltd.
+ * Philippe Robin, <philippe.robin@arm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* Simple U-Boot driver for the PrimeCell PL011 UARTs on the IntegratorCP */
+/* Should be fairly simple to make it work with the PL010 as well */
+
+#include <common.h>
+
+#ifdef CFG_PL010_SERIAL
+
+#include "serial_pl011.h"
+
+#define IO_WRITE(addr, val) (*(volatile unsigned int *)(addr) = (val))
+#define IO_READ(addr) (*(volatile unsigned int *)(addr))
+
+/* Integrator AP has two UARTs, we use the first one, at 38400-8-N-1 */
+#define CONSOLE_PORT CONFIG_CONS_INDEX
+#define baudRate CONFIG_BAUDRATE
+static volatile unsigned char *const port[] = CONFIG_PL01x_PORTS;
+#define NUM_PORTS (sizeof(port)/sizeof(port[0]))
+
+
+static void pl010_putc (int portnum, char c);
+static int pl010_getc (int portnum);
+static int pl010_tstc (int portnum);
+
+
+int serial_init (void)
+{
+ unsigned int divisor;
+
+ /*
+ ** First, disable everything.
+ */
+ IO_WRITE (port[CONSOLE_PORT] + UART_PL010_CR, 0x0);
+
+ /*
+ ** Set baud rate
+ **
+ */
+ switch (baudRate) {
+ case 9600:
+ divisor = UART_PL010_BAUD_9600;
+ break;
+
+ case 19200:
+ divisor = UART_PL010_BAUD_9600;
+ break;
+
+ case 38400:
+ divisor = UART_PL010_BAUD_38400;
+ break;
+
+ case 57600:
+ divisor = UART_PL010_BAUD_57600;
+ break;
+
+ case 115200:
+ divisor = UART_PL010_BAUD_115200;
+ break;
+
+ default:
+ divisor = UART_PL010_BAUD_38400;
+ }
+
+ IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRM,
+ ((divisor & 0xf00) >> 8));
+ IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRL, (divisor & 0xff));
+
+ /*
+ ** Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled.
+ */
+ IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRH,
+ (UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN));
+
+ /*
+ ** Finally, enable the UART
+ */
+ IO_WRITE (port[CONSOLE_PORT] + UART_PL010_CR, (UART_PL010_CR_UARTEN));
+
+ return (0);
+}
+
+void serial_putc (const char c)
+{
+ if (c == '\n')
+ pl010_putc (CONSOLE_PORT, '\r');
+
+ pl010_putc (CONSOLE_PORT, c);
+}
+
+void serial_puts (const char *s)
+{
+ while (*s) {
+ serial_putc (*s++);
+ }
+}
+
+int serial_getc (void)
+{
+ return pl010_getc (CONSOLE_PORT);
+}
+
+int serial_tstc (void)
+{
+ return pl010_tstc (CONSOLE_PORT);
+}
+
+void serial_setbrg (void)
+{
+}
+
+static void pl010_putc (int portnum, char c)
+{
+ /* Wait until there is space in the FIFO */
+ while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF);
+
+ /* Send the character */
+ IO_WRITE (port[portnum] + UART_PL01x_DR, c);
+}
+
+static int pl010_getc (int portnum)
+{
+ unsigned int data;
+
+ /* Wait until there is data in the FIFO */
+ while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE);
+
+ data = IO_READ (port[portnum] + UART_PL01x_DR);
+
+ /* Check for an error flag */
+ if (data & 0xFFFFFF00) {
+ /* Clear the error */
+ IO_WRITE (port[portnum] + UART_PL01x_ECR, 0xFFFFFFFF);
+ return -1;
+ }
+
+ return (int) data;
+}
+
+static int pl010_tstc (int portnum)
+{
+ return !(IO_READ (port[portnum] + UART_PL01x_FR) &
+ UART_PL01x_FR_RXFE);
+}
+
+#endif
OpenPOWER on IntegriCloud