diff options
Diffstat (limited to 'drivers/net/inca-ip_sw.c')
| -rw-r--r-- | drivers/net/inca-ip_sw.c | 817 |
1 files changed, 817 insertions, 0 deletions
diff --git a/drivers/net/inca-ip_sw.c b/drivers/net/inca-ip_sw.c new file mode 100644 index 0000000000..e4aaed6afb --- /dev/null +++ b/drivers/net/inca-ip_sw.c @@ -0,0 +1,817 @@ +/* + * INCA-IP internal switch ethernet driver. + * + * (C) Copyright 2003-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include <common.h> + +#if defined(CONFIG_CMD_NET) \ + && defined(CONFIG_NET_MULTI) && defined(CONFIG_INCA_IP_SWITCH) + +#include <malloc.h> +#include <net.h> +#include <asm/inca-ip.h> +#include <asm/addrspace.h> + + +#define NUM_RX_DESC PKTBUFSRX +#define NUM_TX_DESC 3 +#define TOUT_LOOP 1000000 + + +#define DELAY udelay(10000) + /* Sometimes the store word instruction hangs while writing to one + * of the Switch registers. Moving the instruction into a separate + * function somehow makes the problem go away. + */ +static void SWORD(volatile u32 * reg, u32 value) +{ + *reg = value; +} + +#define DMA_WRITE_REG(reg, value) *((volatile u32 *)reg) = (u32)value; +#define DMA_READ_REG(reg, value) value = (u32)*((volatile u32*)reg) +#define SW_WRITE_REG(reg, value) \ + SWORD(reg, value);\ + DELAY;\ + SWORD(reg, value); + +#define SW_READ_REG(reg, value) \ + value = (u32)*((volatile u32*)reg);\ + DELAY;\ + value = (u32)*((volatile u32*)reg); + +#define INCA_DMA_TX_POLLING_TIME 0x07 +#define INCA_DMA_RX_POLLING_TIME 0x07 + +#define INCA_DMA_TX_HOLD 0x80000000 +#define INCA_DMA_TX_EOP 0x40000000 +#define INCA_DMA_TX_SOP 0x20000000 +#define INCA_DMA_TX_ICPT 0x10000000 +#define INCA_DMA_TX_IEOP 0x08000000 + +#define INCA_DMA_RX_C 0x80000000 +#define INCA_DMA_RX_SOP 0x40000000 +#define INCA_DMA_RX_EOP 0x20000000 + +#define INCA_SWITCH_PHY_SPEED_10H 0x1 +#define INCA_SWITCH_PHY_SPEED_10F 0x5 +#define INCA_SWITCH_PHY_SPEED_100H 0x2 +#define INCA_SWITCH_PHY_SPEED_100F 0x6 + +/************************ Auto MDIX settings ************************/ +#define INCA_IP_AUTO_MDIX_LAN_PORTS_DIR INCA_IP_Ports_P1_DIR +#define INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL INCA_IP_Ports_P1_ALTSEL +#define INCA_IP_AUTO_MDIX_LAN_PORTS_OUT INCA_IP_Ports_P1_OUT +#define INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX 16 + +#define WAIT_SIGNAL_RETRIES 100 +#define WAIT_LINK_RETRIES 100 +#define LINK_RETRY_DELAY 2000 /* ms */ +/********************************************************************/ + +typedef struct +{ + union { + struct { + volatile u32 HOLD :1; + volatile u32 ICpt :1; + volatile u32 IEop :1; + volatile u32 offset :3; + volatile u32 reserved0 :4; + volatile u32 NFB :22; + }field; + + volatile u32 word; + }params; + + volatile u32 nextRxDescPtr; + + volatile u32 RxDataPtr; + + union { + struct { + volatile u32 C :1; + volatile u32 Sop :1; + volatile u32 Eop :1; + volatile u32 reserved3 :12; + volatile u32 NBT :17; + }field; + + volatile u32 word; + }status; + +} inca_rx_descriptor_t; + + +typedef struct +{ + union { + struct { + volatile u32 HOLD :1; + volatile u32 Eop :1; + volatile u32 Sop :1; + volatile u32 ICpt :1; + volatile u32 IEop :1; + volatile u32 reserved0 :5; + volatile u32 NBA :22; + }field; + + volatile u32 word; + }params; + + volatile u32 nextTxDescPtr; + + volatile u32 TxDataPtr; + + volatile u32 C :1; + volatile u32 reserved3 :31; + +} inca_tx_descriptor_t; + + +static inca_rx_descriptor_t rx_ring[NUM_RX_DESC] __attribute__ ((aligned(16))); +static inca_tx_descriptor_t tx_ring[NUM_TX_DESC] __attribute__ ((aligned(16))); + +static int tx_new, rx_new, tx_hold, rx_hold; +static int tx_old_hold = -1; +static int initialized = 0; + + +static int inca_switch_init(struct eth_device *dev, bd_t * bis); +static int inca_switch_send(struct eth_device *dev, volatile void *packet, int length); +static int inca_switch_recv(struct eth_device *dev); +static void inca_switch_halt(struct eth_device *dev); +static void inca_init_switch_chip(void); +static void inca_dma_init(void); +static int inca_amdix(void); + + +int inca_switch_initialize(bd_t * bis) +{ + struct eth_device *dev; + +#if 0 + printf("Entered inca_switch_initialize()\n"); +#endif + + if (!(dev = (struct eth_device *) malloc (sizeof *dev))) { + printf("Failed to allocate memory\n"); + return 0; + } + memset(dev, 0, sizeof(*dev)); + + inca_dma_init(); + + inca_init_switch_chip(); + +#if defined(CONFIG_INCA_IP_SWITCH_AMDIX) + inca_amdix(); +#endif + + sprintf(dev->name, "INCA-IP Switch"); + dev->init = inca_switch_init; + dev->halt = inca_switch_halt; + dev->send = inca_switch_send; + dev->recv = inca_switch_recv; + + eth_register(dev); + +#if 0 + printf("Leaving inca_switch_initialize()\n"); +#endif + + return 1; +} + + +static int inca_switch_init(struct eth_device *dev, bd_t * bis) +{ + int i; + u32 v, regValue; + u16 wTmp; + +#if 0 + printf("Entering inca_switch_init()\n"); +#endif + + /* Set MAC address. + */ + wTmp = (u16)dev->enetaddr[0]; + regValue = (wTmp << 8) | dev->enetaddr[1]; + + SW_WRITE_REG(INCA_IP_Switch_PMAC_SA1, regValue); + + wTmp = (u16)dev->enetaddr[2]; + regValue = (wTmp << 8) | dev->enetaddr[3]; + regValue = regValue << 16; + wTmp = (u16)dev->enetaddr[4]; + regValue |= (wTmp<<8) | dev->enetaddr[5]; + + SW_WRITE_REG(INCA_IP_Switch_PMAC_SA2, regValue); + + /* Initialize the descriptor rings. + */ + for (i = 0; i < NUM_RX_DESC; i++) { + inca_rx_descriptor_t * rx_desc = KSEG1ADDR(&rx_ring[i]); + memset(rx_desc, 0, sizeof(rx_ring[i])); + + /* Set maximum size of receive buffer. + */ + rx_desc->params.field.NFB = PKTSIZE_ALIGN; + + /* Set the offset of the receive buffer. Zero means + * that the offset mechanism is not used. + */ + rx_desc->params.field.offset = 0; + + /* Check if it is the last descriptor. + */ + if (i == (NUM_RX_DESC - 1)) { + /* Let the last descriptor point to the first + * one. + */ + rx_desc->nextRxDescPtr = KSEG1ADDR((u32)rx_ring); + } else { + /* Set the address of the next descriptor. + */ + rx_desc->nextRxDescPtr = (u32)KSEG1ADDR(&rx_ring[i+1]); + } + + rx_desc->RxDataPtr = (u32)KSEG1ADDR(NetRxPackets[i]); + } + +#if 0 + printf("rx_ring = 0x%08X 0x%08X\n", (u32)rx_ring, (u32)&rx_ring[0]); + printf("tx_ring = 0x%08X 0x%08X\n", (u32)tx_ring, (u32)&tx_ring[0]); +#endif + + for (i = 0; i < NUM_TX_DESC; i++) { + inca_tx_descriptor_t * tx_desc = KSEG1ADDR(&tx_ring[i]); + + memset(tx_desc, 0, sizeof(tx_ring[i])); + + tx_desc->params.word = 0; + tx_desc->params.field.HOLD = 1; + tx_desc->C = 1; + + /* Check if it is the last descriptor. + */ + if (i == (NUM_TX_DESC - 1)) { + /* Let the last descriptor point to the + * first one. + */ + tx_desc->nextTxDescPtr = KSEG1ADDR((u32)tx_ring); + } else { + /* Set the address of the next descriptor. + */ + tx_desc->nextTxDescPtr = (u32)KSEG1ADDR(&tx_ring[i+1]); + } + } + + /* Initialize RxDMA. + */ + DMA_READ_REG(INCA_IP_DMA_DMA_RXISR, v); +#if 0 + printf("RX status = 0x%08X\n", v); +#endif + + /* Writing to the FRDA of CHANNEL. + */ + DMA_WRITE_REG(INCA_IP_DMA_DMA_RXFRDA0, (u32)rx_ring); + + /* Writing to the COMMAND REG. + */ + DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_INIT); + + /* Initialize TxDMA. + */ + DMA_READ_REG(INCA_IP_DMA_DMA_TXISR, v); +#if 0 + printf("TX status = 0x%08X\n", v); +#endif + + /* Writing to the FRDA of CHANNEL. + */ + DMA_WRITE_REG(INCA_IP_DMA_DMA_TXFRDA0, (u32)tx_ring); + + tx_new = rx_new = 0; + + tx_hold = NUM_TX_DESC - 1; + rx_hold = NUM_RX_DESC - 1; + +#if 0 + rx_ring[rx_hold].params.field.HOLD = 1; +#endif + /* enable spanning tree forwarding, enable the CPU port */ + /* ST_PT: + * CPS (CPU port status) 0x3 (forwarding) + * LPS (LAN port status) 0x3 (forwarding) + * PPS (PC port status) 0x3 (forwarding) + */ + SW_WRITE_REG(INCA_IP_Switch_ST_PT,0x3f); + +#if 0 + printf("Leaving inca_switch_init()\n"); +#endif + + return 0; +} + + +static int inca_switch_send(struct eth_device *dev, volatile void *packet, int length) +{ + int i; + int res = -1; + u32 command; + u32 regValue; + inca_tx_descriptor_t * tx_desc = KSEG1ADDR(&tx_ring[tx_new]); + +#if 0 + printf("Entered inca_switch_send()\n"); +#endif + + if (length <= 0) { + printf ("%s: bad packet size: %d\n", dev->name, length); + goto Done; + } + + for(i = 0; tx_desc->C == 0; i++) { + if (i >= TOUT_LOOP) { + printf("%s: tx error buffer not ready\n", dev->name); + goto Done; + } + } + + if (tx_old_hold >= 0) { + KSEG1ADDR(&tx_ring[tx_old_hold])->params.field.HOLD = 1; + } + tx_old_hold = tx_hold; + + tx_desc->params.word = + (INCA_DMA_TX_SOP | INCA_DMA_TX_EOP | INCA_DMA_TX_HOLD); + + tx_desc->C = 0; + tx_desc->TxDataPtr = (u32)packet; + tx_desc->params.field.NBA = length; + + KSEG1ADDR(&tx_ring[tx_hold])->params.field.HOLD = 0; + + tx_hold = tx_new; + tx_new = (tx_new + 1) % NUM_TX_DESC; + + + if (! initialized) { + command = INCA_IP_DMA_DMA_TXCCR0_INIT; + initialized = 1; + } else { + command = INCA_IP_DMA_DMA_TXCCR0_HR; + } + + DMA_READ_REG(INCA_IP_DMA_DMA_TXCCR0, regValue); + regValue |= command; +#if 0 + printf("regValue = 0x%x\n", regValue); +#endif + DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, regValue); + +#if 1 + for(i = 0; KSEG1ADDR(&tx_ring[tx_hold])->C == 0; i++) { + if (i >= TOUT_LOOP) { + printf("%s: tx buffer not ready\n", dev->name); + goto Done; + } + } +#endif + res = length; +Done: +#if 0 + printf("Leaving inca_switch_send()\n"); +#endif + return res; +} + + +static int inca_switch_recv(struct eth_device *dev) +{ + int length = 0; + inca_rx_descriptor_t * rx_desc; + +#if 0 + printf("Entered inca_switch_recv()\n"); +#endif + + for (;;) { + rx_desc = KSEG1ADDR(&rx_ring[rx_new]); + + if (rx_desc->status.field.C == 0) { + break; + } + +#if 0 + rx_ring[rx_new].params.field.HOLD = 1; +#endif + + if (! rx_desc->status.field.Eop) { + printf("Partly received packet!!!\n"); + break; + } + + length = rx_desc->status.field.NBT; + rx_desc->status.word &= + ~(INCA_DMA_RX_EOP | INCA_DMA_RX_SOP | INCA_DMA_RX_C); +#if 0 +{ + int i; + for (i=0;i<length - 4;i++) { + if (i % 16 == 0) printf("\n%04x: ", i); + printf("%02X ", NetRxPackets[rx_new][i]); + } + printf("\n"); +} +#endif + + if (length) { +#if 0 + printf("Received %d bytes\n", length); +#endif + NetReceive((void*)KSEG1ADDR(NetRxPackets[rx_new]), length - 4); + } else { +#if 1 + printf("Zero length!!!\n"); +#endif + } + + + KSEG1ADDR(&rx_ring[rx_hold])->params.field.HOLD = 0; + + rx_hold = rx_new; + + rx_new = (rx_new + 1) % NUM_RX_DESC; + } + +#if 0 + printf("Leaving inca_switch_recv()\n"); +#endif + + return length; +} + + +static void inca_switch_halt(struct eth_device *dev) +{ +#if 0 + printf("Entered inca_switch_halt()\n"); +#endif + +#if 1 + initialized = 0; +#endif +#if 1 + /* Disable forwarding to the CPU port. + */ + SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf); + + /* Close RxDMA channel. + */ + DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF); + + /* Close TxDMA channel. + */ + DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, INCA_IP_DMA_DMA_TXCCR0_OFF); + + +#endif +#if 0 + printf("Leaving inca_switch_halt()\n"); +#endif +} + + +static void inca_init_switch_chip(void) +{ + u32 regValue; + + /* To workaround a problem with collision counter + * (see Errata sheet). + */ + SW_WRITE_REG(INCA_IP_Switch_PC_TX_CTL, 0x00000001); + SW_WRITE_REG(INCA_IP_Switch_LAN_TX_CTL, 0x00000001); + +#if 1 + /* init MDIO configuration: + * MDS (Poll speed): 0x01 (4ms) + * PHY_LAN_ADDR: 0x06 + * PHY_PC_ADDR: 0x05 + * UEP (Use External PHY): 0x00 (Internal PHY is used) + * PS (Port Select): 0x00 (PT/UMM for LAN) + * PT (PHY Test): 0x00 (no test mode) + * UMM (Use MDIO Mode): 0x00 (state machine is disabled) + */ + SW_WRITE_REG(INCA_IP_Switch_MDIO_CFG, 0x4c50); + + /* init PHY: + * SL (Auto Neg. Speed for LAN) + * SP (Auto Neg. Speed for PC) + * LL (Link Status for LAN) + * LP (Link Status for PC) + * DL (Duplex Status for LAN) + * DP (Duplex Status for PC) + * PL (Auto Neg. Pause Status for LAN) + * PP (Auto Neg. Pause Status for PC) + */ + SW_WRITE_REG (INCA_IP_Switch_EPHY, 0xff); + + /* MDIO_ACC: + * RA (Request/Ack) 0x01 (Request) + * RW (Read/Write) 0x01 (Write) + * PHY_ADDR 0x05 (PC) + * REG_ADDR 0x00 (PHY_BCR: basic control register) + * PHY_DATA 0x8000 + * Reset - software reset + * LB (loop back) - normal + * SS (speed select) - 10 Mbit/s + * ANE (auto neg. enable) - enable + * PD (power down) - normal + * ISO (isolate) - normal + * RAN (restart auto neg.) - normal + * DM (duplex mode) - half duplex + * CT (collision test) - enable + */ + SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0a09000); + + /* MDIO_ACC: + * RA (Request/Ack) 0x01 (Request) + * RW (Read/Write) 0x01 (Write) + * PHY_ADDR 0x06 (LAN) + * REG_ADDR 0x00 (PHY_BCR: basic control register) + * PHY_DATA 0x8000 + * Reset - software reset + * LB (loop back) - normal + * SS (speed select) - 10 Mbit/s + * ANE (auto neg. enable) - enable + * PD (power down) - normal + * ISO (isolate) - normal + * RAN (restart auto neg.) - normal + * DM (duplex mode) - half duplex + * CT (collision test) - enable + */ + SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0c09000); + +#endif + + /* Make sure the CPU port is disabled for now. We + * don't want packets to get stacked for us until + * we enable DMA and are prepared to receive them. + */ + SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf); + + SW_READ_REG(INCA_IP_Switch_ARL_CTL, regValue); + + /* CRC GEN is enabled. + */ + regValue |= 0x00000200; + SW_WRITE_REG(INCA_IP_Switch_ARL_CTL, regValue); + + /* ADD TAG is disabled. + */ + SW_READ_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue); + regValue &= ~0x00000002; + SW_WRITE_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue); +} + + +static void inca_dma_init(void) +{ + /* Switch off all DMA channels. + */ + DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF); + DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR1, INCA_IP_DMA_DMA_RXCCR1_OFF); + + DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF); + DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR1, INCA_IP_DMA_DMA_TXCCR1_OFF); + DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR2, INCA_IP_DMA_DMA_TXCCR2_OFF); + + /* Setup TX channel polling time. + */ + DMA_WRITE_REG(INCA_IP_DMA_DMA_TXPOLL, INCA_DMA_TX_POLLING_TIME); + + /* Setup RX channel polling time. + */ + DMA_WRITE_REG(INCA_IP_DMA_DMA_RXPOLL, INCA_DMA_RX_POLLING_TIME); + + /* ERRATA: write reset value into the DMA RX IMR register. + */ + DMA_WRITE_REG(INCA_IP_DMA_DMA_RXIMR, 0xFFFFFFFF); + + /* Just in case: disable all transmit interrupts also. + */ + DMA_WRITE_REG(INCA_IP_DMA_DMA_TXIMR, 0xFFFFFFFF); + + DMA_WRITE_REG(INCA_IP_DMA_DMA_TXISR, 0xFFFFFFFF); + DMA_WRITE_REG(INCA_IP_DMA_DMA_RXISR, 0xFFFFFFFF); +} + +#if defined(CONFIG_INCA_IP_SWITCH_AMDIX) +static int inca_amdix(void) +{ + u32 phyReg1 = 0; + u32 phyReg4 = 0; + u32 phyReg5 = 0; + u32 phyReg6 = 0; + u32 phyReg31 = 0; + u32 regEphy = 0; + int mdi_flag; + int retries; + + /* Setup GPIO pins. + */ + *INCA_IP_AUTO_MDIX_LAN_PORTS_DIR |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX); + *INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX); + +#if 0 + /* Wait for signal. + */ + retries = WAIT_SIGNAL_RETRIES; + while (--retries) { + SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, + (0x1 << 31) | /* RA */ + (0x0 << 30) | /* Read */ + (0x6 << 21) | /* LAN */ + (17 << 16)); /* PHY_MCSR */ + do { + SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1); + } while (phyReg1 & (1 << 31)); + + if (phyReg1 & (1 << 1)) { + /* Signal detected */ + break; + } + } + + if (!retries) + goto Fail; +#endif + + /* Set MDI mode. + */ + *INCA_IP_AUTO_MDIX_LAN_PORTS_OUT &= ~(1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX); + mdi_flag = 1; + + /* Wait for link. + */ + retries = WAIT_LINK_RETRIES; + while (--retries) { + udelay(LINK_RETRY_DELAY * 1000); + SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, + (0x1 << 31) | /* RA */ + (0x0 << 30) | /* Read */ + (0x6 << 21) | /* LAN */ + (1 << 16)); /* PHY_BSR */ + do { + SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1); + } while (phyReg1 & (1 << 31)); + + if (phyReg1 & (1 << 2)) { + /* Link is up */ + break; + } else if (mdi_flag) { + /* Set MDIX mode */ + *INCA_IP_AUTO_MDIX_LAN_PORTS_OUT |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX); + mdi_flag = 0; + } else { + /* Set MDI mode */ + *INCA_IP_AUTO_MDIX_LAN_PORTS_OUT &= ~(1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX); + mdi_flag = 1; + } + } + + if (!retries) { + goto Fail; + } else { + SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, + (0x1 << 31) | /* RA */ + (0x0 << 30) | /* Read */ + (0x6 << 21) | /* LAN */ + (1 << 16)); /* PHY_BSR */ + do { + SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1); + } while (phyReg1 & (1 << 31)); + + /* Auto-negotiation / Parallel detection complete + */ + if (phyReg1 & (1 << 5)) { + SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, + (0x1 << 31) | /* RA */ + (0x0 << 30) | /* Read */ + (0x6 << 21) | /* LAN */ + (31 << 16)); /* PHY_SCSR */ + do { + SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg31); + } while (phyReg31 & (1 << 31)); + + switch ((phyReg31 >> 2) & 0x7) { + case INCA_SWITCH_PHY_SPEED_10H: + /* 10Base-T Half-duplex */ + regEphy = 0; + break; + case INCA_SWITCH_PHY_SPEED_10F: + /* 10Base-T Full-duplex */ + regEphy = INCA_IP_Switch_EPHY_DL; + break; + case INCA_SWITCH_PHY_SPEED_100H: + /* 100Base-TX Half-duplex */ + regEphy = INCA_IP_Switch_EPHY_SL; + break; + case INCA_SWITCH_PHY_SPEED_100F: + /* 100Base-TX Full-duplex */ + regEphy = INCA_IP_Switch_EPHY_SL | INCA_IP_Switch_EPHY_DL; + break; + } + + /* In case of Auto-negotiation, + * update the negotiated PAUSE support status + */ + if (phyReg1 & (1 << 3)) { + SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, + (0x1 << 31) | /* RA */ + (0x0 << 30) | /* Read */ + (0x6 << 21) | /* LAN */ + (6 << 16)); /* PHY_ANER */ + do { + SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg6); + } while (phyReg6 & (1 << 31)); + + /* We are Autoneg-able. + * Is Link partner also able to autoneg? + */ + if (phyReg6 & (1 << 0)) { + SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, + (0x1 << 31) | /* RA */ + (0x0 << 30) | /* Read */ + (0x6 << 21) | /* LAN */ + (4 << 16)); /* PHY_ANAR */ + do { + SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg4); + } while (phyReg4 & (1 << 31)); + + /* We advertise PAUSE capab. + * Does link partner also advertise it? + */ + if (phyReg4 & (1 << 10)) { + SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, + (0x1 << 31) | /* RA */ + (0x0 << 30) | /* Read */ + (0x6 << 21) | /* LAN */ + (5 << 16)); /* PHY_ANLPAR */ + do { + SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg5); + } while (phyReg5 & (1 << 31)); + + /* Link partner is PAUSE capab. + */ + if (phyReg5 & (1 << 10)) { + regEphy |= INCA_IP_Switch_EPHY_PL; + } + } + } + + } + + /* Link is up */ + regEphy |= INCA_IP_Switch_EPHY_LL; + + SW_WRITE_REG(INCA_IP_Switch_EPHY, regEphy); + } + } + + return 0; + +Fail: + printf("No Link on LAN port\n"); + return -1; +} +#endif /* CONFIG_INCA_IP_SWITCH_AMDIX */ + +#endif |
