diff options
Diffstat (limited to 'drivers/mtd/spi/atmel.c')
| -rw-r--r-- | drivers/mtd/spi/atmel.c | 544 |
1 files changed, 0 insertions, 544 deletions
diff --git a/drivers/mtd/spi/atmel.c b/drivers/mtd/spi/atmel.c deleted file mode 100644 index f34df43f58..0000000000 --- a/drivers/mtd/spi/atmel.c +++ /dev/null @@ -1,544 +0,0 @@ -/* - * Atmel SPI DataFlash support - * - * Copyright (C) 2008 Atmel Corporation - * Licensed under the GPL-2 or later. - */ - -#include <common.h> -#include <malloc.h> -#include <spi_flash.h> - -#include "spi_flash_internal.h" - -/* AT45-specific commands */ -#define CMD_AT45_READ_STATUS 0xd7 -#define CMD_AT45_ERASE_PAGE 0x81 -#define CMD_AT45_LOAD_PROG_BUF1 0x82 -#define CMD_AT45_LOAD_BUF1 0x84 -#define CMD_AT45_LOAD_PROG_BUF2 0x85 -#define CMD_AT45_LOAD_BUF2 0x87 -#define CMD_AT45_PROG_BUF1 0x88 -#define CMD_AT45_PROG_BUF2 0x89 - -/* AT45 status register bits */ -#define AT45_STATUS_P2_PAGE_SIZE (1 << 0) -#define AT45_STATUS_READY (1 << 7) - -/* DataFlash family IDs, as obtained from the second idcode byte */ -#define DF_FAMILY_AT26F 0 -#define DF_FAMILY_AT45 1 -#define DF_FAMILY_AT26DF 2 /* AT25DF and AT26DF */ - -struct atmel_spi_flash_params { - u8 idcode1; - /* Log2 of page size in power-of-two mode */ - u8 l2_page_size; - u8 pages_per_block; - u8 blocks_per_sector; - u8 nr_sectors; - const char *name; -}; - -/* spi_flash needs to be first so upper layers can free() it */ -struct atmel_spi_flash { - struct spi_flash flash; - const struct atmel_spi_flash_params *params; -}; - -static inline struct atmel_spi_flash * -to_atmel_spi_flash(struct spi_flash *flash) -{ - return container_of(flash, struct atmel_spi_flash, flash); -} - -static const struct atmel_spi_flash_params atmel_spi_flash_table[] = { - { - .idcode1 = 0x22, - .l2_page_size = 8, - .pages_per_block = 8, - .blocks_per_sector = 16, - .nr_sectors = 4, - .name = "AT45DB011D", - }, - { - .idcode1 = 0x23, - .l2_page_size = 8, - .pages_per_block = 8, - .blocks_per_sector = 16, - .nr_sectors = 8, - .name = "AT45DB021D", - }, - { - .idcode1 = 0x24, - .l2_page_size = 8, - .pages_per_block = 8, - .blocks_per_sector = 32, - .nr_sectors = 8, - .name = "AT45DB041D", - }, - { - .idcode1 = 0x25, - .l2_page_size = 8, - .pages_per_block = 8, - .blocks_per_sector = 32, - .nr_sectors = 16, - .name = "AT45DB081D", - }, - { - .idcode1 = 0x26, - .l2_page_size = 9, - .pages_per_block = 8, - .blocks_per_sector = 32, - .nr_sectors = 16, - .name = "AT45DB161D", - }, - { - .idcode1 = 0x27, - .l2_page_size = 9, - .pages_per_block = 8, - .blocks_per_sector = 64, - .nr_sectors = 64, - .name = "AT45DB321D", - }, - { - .idcode1 = 0x28, - .l2_page_size = 10, - .pages_per_block = 8, - .blocks_per_sector = 32, - .nr_sectors = 32, - .name = "AT45DB642D", - }, - { - .idcode1 = 0x47, - .l2_page_size = 8, - .pages_per_block = 16, - .blocks_per_sector = 16, - .nr_sectors = 64, - .name = "AT25DF321", - }, -}; - -static int at45_wait_ready(struct spi_flash *flash, unsigned long timeout) -{ - struct spi_slave *spi = flash->spi; - unsigned long timebase; - int ret; - u8 cmd = CMD_AT45_READ_STATUS; - u8 status; - - timebase = get_timer(0); - - ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN); - if (ret) - return -1; - - do { - ret = spi_xfer(spi, 8, NULL, &status, 0); - if (ret) - return -1; - - if (status & AT45_STATUS_READY) - break; - } while (get_timer(timebase) < timeout); - - /* Deactivate CS */ - spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END); - - if (status & AT45_STATUS_READY) - return 0; - - /* Timed out */ - return -1; -} - -/* - * Assemble the address part of a command for AT45 devices in - * non-power-of-two page size mode. - */ -static void at45_build_address(struct atmel_spi_flash *asf, u8 *cmd, u32 offset) -{ - unsigned long page_addr; - unsigned long byte_addr; - unsigned long page_size; - unsigned int page_shift; - - /* - * The "extra" space per page is the power-of-two page size - * divided by 32. - */ - page_shift = asf->params->l2_page_size; - page_size = (1 << page_shift) + (1 << (page_shift - 5)); - page_shift++; - page_addr = offset / page_size; - byte_addr = offset % page_size; - - cmd[0] = page_addr >> (16 - page_shift); - cmd[1] = page_addr << (page_shift - 8) | (byte_addr >> 8); - cmd[2] = byte_addr; -} - -static int dataflash_read_fast_at45(struct spi_flash *flash, - u32 offset, size_t len, void *buf) -{ - struct atmel_spi_flash *asf = to_atmel_spi_flash(flash); - u8 cmd[5]; - - cmd[0] = CMD_READ_ARRAY_FAST; - at45_build_address(asf, cmd + 1, offset); - cmd[4] = 0x00; - - return spi_flash_read_common(flash, cmd, sizeof(cmd), buf, len); -} - -/* - * TODO: the two write funcs (_p2/_at45) should get unified ... - */ -static int dataflash_write_p2(struct spi_flash *flash, - u32 offset, size_t len, const void *buf) -{ - struct atmel_spi_flash *asf = to_atmel_spi_flash(flash); - unsigned long page_size; - u32 addr = offset; - size_t chunk_len; - size_t actual; - int ret; - u8 cmd[4]; - - /* - * TODO: This function currently uses only page buffer #1. We can - * speed this up by using both buffers and loading one buffer while - * the other is being programmed into main memory. - */ - - page_size = (1 << asf->params->l2_page_size); - - ret = spi_claim_bus(flash->spi); - if (ret) { - debug("SF: Unable to claim SPI bus\n"); - return ret; - } - - for (actual = 0; actual < len; actual += chunk_len) { - chunk_len = min(len - actual, page_size - (addr % page_size)); - - /* Use the same address bits for both commands */ - cmd[0] = CMD_AT45_LOAD_BUF1; - cmd[1] = addr >> 16; - cmd[2] = addr >> 8; - cmd[3] = addr; - - ret = spi_flash_cmd_write(flash->spi, cmd, 4, - buf + actual, chunk_len); - if (ret < 0) { - debug("SF: Loading AT45 buffer failed\n"); - goto out; - } - - cmd[0] = CMD_AT45_PROG_BUF1; - ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0); - if (ret < 0) { - debug("SF: AT45 page programming failed\n"); - goto out; - } - - ret = at45_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); - if (ret < 0) { - debug("SF: AT45 page programming timed out\n"); - goto out; - } - - addr += chunk_len; - } - - debug("SF: AT45: Successfully programmed %zu bytes @ 0x%x\n", - len, offset); - ret = 0; - -out: - spi_release_bus(flash->spi); - return ret; -} - -static int dataflash_write_at45(struct spi_flash *flash, - u32 offset, size_t len, const void *buf) -{ - struct atmel_spi_flash *asf = to_atmel_spi_flash(flash); - unsigned long page_addr; - unsigned long byte_addr; - unsigned long page_size; - unsigned int page_shift; - size_t chunk_len; - size_t actual; - int ret; - u8 cmd[4]; - - /* - * TODO: This function currently uses only page buffer #1. We can - * speed this up by using both buffers and loading one buffer while - * the other is being programmed into main memory. - */ - - page_shift = asf->params->l2_page_size; - page_size = (1 << page_shift) + (1 << (page_shift - 5)); - page_shift++; - page_addr = offset / page_size; - byte_addr = offset % page_size; - - ret = spi_claim_bus(flash->spi); - if (ret) { - debug("SF: Unable to claim SPI bus\n"); - return ret; - } - - for (actual = 0; actual < len; actual += chunk_len) { - chunk_len = min(len - actual, page_size - byte_addr); - - /* Use the same address bits for both commands */ - cmd[0] = CMD_AT45_LOAD_BUF1; - cmd[1] = page_addr >> (16 - page_shift); - cmd[2] = page_addr << (page_shift - 8) | (byte_addr >> 8); - cmd[3] = byte_addr; - - ret = spi_flash_cmd_write(flash->spi, cmd, 4, - buf + actual, chunk_len); - if (ret < 0) { - debug("SF: Loading AT45 buffer failed\n"); - goto out; - } - - cmd[0] = CMD_AT45_PROG_BUF1; - ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0); - if (ret < 0) { - debug("SF: AT45 page programming failed\n"); - goto out; - } - - ret = at45_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); - if (ret < 0) { - debug("SF: AT45 page programming timed out\n"); - goto out; - } - - page_addr++; - byte_addr = 0; - } - - debug("SF: AT45: Successfully programmed %zu bytes @ 0x%x\n", - len, offset); - ret = 0; - -out: - spi_release_bus(flash->spi); - return ret; -} - -/* - * TODO: the two erase funcs (_p2/_at45) should get unified ... - */ -static int dataflash_erase_p2(struct spi_flash *flash, u32 offset, size_t len) -{ - struct atmel_spi_flash *asf = to_atmel_spi_flash(flash); - unsigned long page_size; - - size_t actual; - int ret; - u8 cmd[4]; - - /* - * TODO: This function currently uses page erase only. We can - * probably speed things up by using block and/or sector erase - * when possible. - */ - - page_size = (1 << asf->params->l2_page_size); - - if (offset % page_size || len % page_size) { - debug("SF: Erase offset/length not multiple of page size\n"); - return -1; - } - - cmd[0] = CMD_AT45_ERASE_PAGE; - cmd[3] = 0x00; - - ret = spi_claim_bus(flash->spi); - if (ret) { - debug("SF: Unable to claim SPI bus\n"); - return ret; - } - - for (actual = 0; actual < len; actual += page_size) { - cmd[1] = offset >> 16; - cmd[2] = offset >> 8; - - ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0); - if (ret < 0) { - debug("SF: AT45 page erase failed\n"); - goto out; - } - - ret = at45_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT); - if (ret < 0) { - debug("SF: AT45 page erase timed out\n"); - goto out; - } - - offset += page_size; - } - - debug("SF: AT45: Successfully erased %zu bytes @ 0x%x\n", - len, offset); - ret = 0; - -out: - spi_release_bus(flash->spi); - return ret; -} - -static int dataflash_erase_at45(struct spi_flash *flash, u32 offset, size_t len) -{ - struct atmel_spi_flash *asf = to_atmel_spi_flash(flash); - unsigned long page_addr; - unsigned long page_size; - unsigned int page_shift; - size_t actual; - int ret; - u8 cmd[4]; - - /* - * TODO: This function currently uses page erase only. We can - * probably speed things up by using block and/or sector erase - * when possible. - */ - - page_shift = asf->params->l2_page_size; - page_size = (1 << page_shift) + (1 << (page_shift - 5)); - page_shift++; - page_addr = offset / page_size; - - if (offset % page_size || len % page_size) { - debug("SF: Erase offset/length not multiple of page size\n"); - return -1; - } - - cmd[0] = CMD_AT45_ERASE_PAGE; - cmd[3] = 0x00; - - ret = spi_claim_bus(flash->spi); - if (ret) { - debug("SF: Unable to claim SPI bus\n"); - return ret; - } - - for (actual = 0; actual < len; actual += page_size) { - cmd[1] = page_addr >> (16 - page_shift); - cmd[2] = page_addr << (page_shift - 8); - - ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0); - if (ret < 0) { - debug("SF: AT45 page erase failed\n"); - goto out; - } - - ret = at45_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT); - if (ret < 0) { - debug("SF: AT45 page erase timed out\n"); - goto out; - } - - page_addr++; - } - - debug("SF: AT45: Successfully erased %zu bytes @ 0x%x\n", - len, offset); - ret = 0; - -out: - spi_release_bus(flash->spi); - return ret; -} - -struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode) -{ - const struct atmel_spi_flash_params *params; - unsigned page_size; - unsigned int family; - struct atmel_spi_flash *asf; - unsigned int i; - int ret; - u8 status; - - for (i = 0; i < ARRAY_SIZE(atmel_spi_flash_table); i++) { - params = &atmel_spi_flash_table[i]; - if (params->idcode1 == idcode[1]) - break; - } - - if (i == ARRAY_SIZE(atmel_spi_flash_table)) { - debug("SF: Unsupported DataFlash ID %02x\n", - idcode[1]); - return NULL; - } - - asf = spi_flash_alloc(struct atmel_spi_flash, spi, params->name); - if (!asf) { - debug("SF: Failed to allocate memory\n"); - return NULL; - } - - asf->params = params; - - /* Assuming power-of-two page size initially. */ - page_size = 1 << params->l2_page_size; - - family = idcode[1] >> 5; - - switch (family) { - case DF_FAMILY_AT45: - /* - * AT45 chips have configurable page size. The status - * register indicates which configuration is active. - */ - ret = spi_flash_cmd(spi, CMD_AT45_READ_STATUS, &status, 1); - if (ret) - goto err; - - debug("SF: AT45 status register: %02x\n", status); - - if (!(status & AT45_STATUS_P2_PAGE_SIZE)) { - asf->flash.read = dataflash_read_fast_at45; - asf->flash.write = dataflash_write_at45; - asf->flash.erase = dataflash_erase_at45; - page_size += 1 << (params->l2_page_size - 5); - } else { - asf->flash.write = dataflash_write_p2; - asf->flash.erase = dataflash_erase_p2; - } - - asf->flash.page_size = page_size; - asf->flash.sector_size = page_size; - break; - - case DF_FAMILY_AT26F: - case DF_FAMILY_AT26DF: - asf->flash.page_size = page_size; - asf->flash.sector_size = 4096; - /* clear SPRL# bit for locked flash */ - spi_flash_cmd_write_status(&asf->flash, 0); - break; - - default: - debug("SF: Unsupported DataFlash family %u\n", family); - goto err; - } - - asf->flash.size = page_size * params->pages_per_block - * params->blocks_per_sector - * params->nr_sectors; - - return &asf->flash; - -err: - free(asf); - return NULL; -} |
