diff options
Diffstat (limited to 'drivers/misc/cros_ec.c')
| -rw-r--r-- | drivers/misc/cros_ec.c | 611 |
1 files changed, 559 insertions, 52 deletions
diff --git a/drivers/misc/cros_ec.c b/drivers/misc/cros_ec.c index 301e8ebbf5..068373b942 100644 --- a/drivers/misc/cros_ec.c +++ b/drivers/misc/cros_ec.c @@ -7,10 +7,11 @@ */ /* - * The Matrix Keyboard Protocol driver handles talking to the keyboard - * controller chip. Mostly this is for keyboard functions, but some other - * things have slipped in, so we provide generic services to talk to the - * KBC. + * This is the interface to the Chrome OS EC. It provides keyboard functions, + * power control and battery management. Quite a few other functions are + * provided to enable the EC software to be updated, talk to the EC's I2C bus + * and store a small amount of data in a memory which persists while the EC + * is not reset. */ #include <common.h> @@ -20,6 +21,7 @@ #include <fdtdec.h> #include <malloc.h> #include <spi.h> +#include <asm/errno.h> #include <asm/io.h> #include <asm-generic/gpio.h> @@ -73,11 +75,184 @@ int cros_ec_calc_checksum(const uint8_t *data, int size) return csum & 0xff; } +/** + * Create a request packet for protocol version 3. + * + * The packet is stored in the device's internal output buffer. + * + * @param dev CROS-EC device + * @param cmd Command to send (EC_CMD_...) + * @param cmd_version Version of command to send (EC_VER_...) + * @param dout Output data (may be NULL If dout_len=0) + * @param dout_len Size of output data in bytes + * @return packet size in bytes, or <0 if error. + */ +static int create_proto3_request(struct cros_ec_dev *dev, + int cmd, int cmd_version, + const void *dout, int dout_len) +{ + struct ec_host_request *rq = (struct ec_host_request *)dev->dout; + int out_bytes = dout_len + sizeof(*rq); + + /* Fail if output size is too big */ + if (out_bytes > (int)sizeof(dev->dout)) { + debug("%s: Cannot send %d bytes\n", __func__, dout_len); + return -EC_RES_REQUEST_TRUNCATED; + } + + /* Fill in request packet */ + rq->struct_version = EC_HOST_REQUEST_VERSION; + rq->checksum = 0; + rq->command = cmd; + rq->command_version = cmd_version; + rq->reserved = 0; + rq->data_len = dout_len; + + /* Copy data after header */ + memcpy(rq + 1, dout, dout_len); + + /* Write checksum field so the entire packet sums to 0 */ + rq->checksum = (uint8_t)(-cros_ec_calc_checksum(dev->dout, out_bytes)); + + cros_ec_dump_data("out", cmd, dev->dout, out_bytes); + + /* Return size of request packet */ + return out_bytes; +} + +/** + * Prepare the device to receive a protocol version 3 response. + * + * @param dev CROS-EC device + * @param din_len Maximum size of response in bytes + * @return maximum expected number of bytes in response, or <0 if error. + */ +static int prepare_proto3_response_buffer(struct cros_ec_dev *dev, int din_len) +{ + int in_bytes = din_len + sizeof(struct ec_host_response); + + /* Fail if input size is too big */ + if (in_bytes > (int)sizeof(dev->din)) { + debug("%s: Cannot receive %d bytes\n", __func__, din_len); + return -EC_RES_RESPONSE_TOO_BIG; + } + + /* Return expected size of response packet */ + return in_bytes; +} + +/** + * Handle a protocol version 3 response packet. + * + * The packet must already be stored in the device's internal input buffer. + * + * @param dev CROS-EC device + * @param dinp Returns pointer to response data + * @param din_len Maximum size of response in bytes + * @return number of bytes of response data, or <0 if error + */ +static int handle_proto3_response(struct cros_ec_dev *dev, + uint8_t **dinp, int din_len) +{ + struct ec_host_response *rs = (struct ec_host_response *)dev->din; + int in_bytes; + int csum; + + cros_ec_dump_data("in-header", -1, dev->din, sizeof(*rs)); + + /* Check input data */ + if (rs->struct_version != EC_HOST_RESPONSE_VERSION) { + debug("%s: EC response version mismatch\n", __func__); + return -EC_RES_INVALID_RESPONSE; + } + + if (rs->reserved) { + debug("%s: EC response reserved != 0\n", __func__); + return -EC_RES_INVALID_RESPONSE; + } + + if (rs->data_len > din_len) { + debug("%s: EC returned too much data\n", __func__); + return -EC_RES_RESPONSE_TOO_BIG; + } + + cros_ec_dump_data("in-data", -1, dev->din + sizeof(*rs), rs->data_len); + + /* Update in_bytes to actual data size */ + in_bytes = sizeof(*rs) + rs->data_len; + + /* Verify checksum */ + csum = cros_ec_calc_checksum(dev->din, in_bytes); + if (csum) { + debug("%s: EC response checksum invalid: 0x%02x\n", __func__, + csum); + return -EC_RES_INVALID_CHECKSUM; + } + + /* Return error result, if any */ + if (rs->result) + return -(int)rs->result; + + /* If we're still here, set response data pointer and return length */ + *dinp = (uint8_t *)(rs + 1); + + return rs->data_len; +} + +static int send_command_proto3(struct cros_ec_dev *dev, + int cmd, int cmd_version, + const void *dout, int dout_len, + uint8_t **dinp, int din_len) +{ + int out_bytes, in_bytes; + int rv; + + /* Create request packet */ + out_bytes = create_proto3_request(dev, cmd, cmd_version, + dout, dout_len); + if (out_bytes < 0) + return out_bytes; + + /* Prepare response buffer */ + in_bytes = prepare_proto3_response_buffer(dev, din_len); + if (in_bytes < 0) + return in_bytes; + + switch (dev->interface) { +#ifdef CONFIG_CROS_EC_SPI + case CROS_EC_IF_SPI: + rv = cros_ec_spi_packet(dev, out_bytes, in_bytes); + break; +#endif +#ifdef CONFIG_CROS_EC_SANDBOX + case CROS_EC_IF_SANDBOX: + rv = cros_ec_sandbox_packet(dev, out_bytes, in_bytes); + break; +#endif + case CROS_EC_IF_NONE: + /* TODO: support protocol 3 for LPC, I2C; for now fall through */ + default: + debug("%s: Unsupported interface\n", __func__); + rv = -1; + } + if (rv < 0) + return rv; + + /* Process the response */ + return handle_proto3_response(dev, dinp, din_len); +} + static int send_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version, const void *dout, int dout_len, uint8_t **dinp, int din_len) { - int ret; + int ret = -1; + + /* Handle protocol version 3 support */ + if (dev->protocol_version == 3) { + return send_command_proto3(dev, cmd, cmd_version, + dout, dout_len, dinp, din_len); + } switch (dev->interface) { #ifdef CONFIG_CROS_EC_SPI @@ -129,19 +304,15 @@ static int ec_command_inptr(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version, const void *dout, int dout_len, uint8_t **dinp, int din_len) { - uint8_t *din; + uint8_t *din = NULL; int len; - if (cmd_version != 0 && !dev->cmd_version_is_supported) { - debug("%s: Command version >0 unsupported\n", __func__); - return -1; - } len = send_command(dev, cmd, cmd_version, dout, dout_len, &din, din_len); /* If the command doesn't complete, wait a while */ if (len == -EC_RES_IN_PROGRESS) { - struct ec_response_get_comms_status *resp; + struct ec_response_get_comms_status *resp = NULL; ulong start; /* Wait for command to complete */ @@ -169,7 +340,8 @@ static int ec_command_inptr(struct cros_ec_dev *dev, uint8_t cmd, NULL, 0, &din, din_len); } - debug("%s: len=%d, dinp=%p, *dinp=%p\n", __func__, len, dinp, *dinp); + debug("%s: len=%d, dinp=%p, *dinp=%p\n", __func__, len, dinp, + dinp ? *dinp : NULL); if (dinp) { /* If we have any data to return, it must be 64bit-aligned */ assert(len <= 0 || !((uintptr_t)din & 7)); @@ -220,8 +392,8 @@ static int ec_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version, int cros_ec_scan_keyboard(struct cros_ec_dev *dev, struct mbkp_keyscan *scan) { - if (ec_command(dev, EC_CMD_CROS_EC_STATE, 0, NULL, 0, scan, - sizeof(scan->data)) < sizeof(scan->data)) + if (ec_command(dev, EC_CMD_MKBP_STATE, 0, NULL, 0, scan, + sizeof(scan->data)) != sizeof(scan->data)) return -1; return 0; @@ -232,10 +404,10 @@ int cros_ec_read_id(struct cros_ec_dev *dev, char *id, int maxlen) struct ec_response_get_version *r; if (ec_command_inptr(dev, EC_CMD_GET_VERSION, 0, NULL, 0, - (uint8_t **)&r, sizeof(*r)) < sizeof(*r)) + (uint8_t **)&r, sizeof(*r)) != sizeof(*r)) return -1; - if (maxlen > sizeof(r->version_string_ro)) + if (maxlen > (int)sizeof(r->version_string_ro)) maxlen = sizeof(r->version_string_ro); switch (r->current_image) { @@ -258,7 +430,7 @@ int cros_ec_read_version(struct cros_ec_dev *dev, { if (ec_command_inptr(dev, EC_CMD_GET_VERSION, 0, NULL, 0, (uint8_t **)versionp, sizeof(**versionp)) - < sizeof(**versionp)) + != sizeof(**versionp)) return -1; return 0; @@ -267,7 +439,7 @@ int cros_ec_read_version(struct cros_ec_dev *dev, int cros_ec_read_build_info(struct cros_ec_dev *dev, char **strp) { if (ec_command_inptr(dev, EC_CMD_GET_BUILD_INFO, 0, NULL, 0, - (uint8_t **)strp, EC_HOST_PARAM_SIZE) < 0) + (uint8_t **)strp, EC_PROTO2_MAX_PARAM_SIZE) < 0) return -1; return 0; @@ -279,7 +451,7 @@ int cros_ec_read_current_image(struct cros_ec_dev *dev, struct ec_response_get_version *r; if (ec_command_inptr(dev, EC_CMD_GET_VERSION, 0, NULL, 0, - (uint8_t **)&r, sizeof(*r)) < sizeof(*r)) + (uint8_t **)&r, sizeof(*r)) != sizeof(*r)) return -1; *image = r->current_image; @@ -336,7 +508,7 @@ int cros_ec_read_hash(struct cros_ec_dev *dev, debug("%s: No valid hash (status=%d size=%d). Compute one...\n", __func__, hash->status, hash->size); - p.cmd = EC_VBOOT_HASH_RECALC; + p.cmd = EC_VBOOT_HASH_START; p.hash_type = EC_VBOOT_HASH_TYPE_SHA256; p.nonce_size = 0; p.offset = EC_VBOOT_HASH_OFFSET_RW; @@ -413,15 +585,15 @@ int cros_ec_interrupt_pending(struct cros_ec_dev *dev) { /* no interrupt support : always poll */ if (!fdt_gpio_isvalid(&dev->ec_int)) - return 1; + return -ENOENT; return !gpio_get_value(dev->ec_int.gpio); } -int cros_ec_info(struct cros_ec_dev *dev, struct ec_response_cros_ec_info *info) +int cros_ec_info(struct cros_ec_dev *dev, struct ec_response_mkbp_info *info) { - if (ec_command(dev, EC_CMD_CROS_EC_INFO, 0, NULL, 0, info, - sizeof(*info)) < sizeof(*info)) + if (ec_command(dev, EC_CMD_MKBP_INFO, 0, NULL, 0, info, + sizeof(*info)) != sizeof(*info)) return -1; return 0; @@ -436,7 +608,7 @@ int cros_ec_get_host_events(struct cros_ec_dev *dev, uint32_t *events_ptr) * used by ACPI/SMI. */ if (ec_command_inptr(dev, EC_CMD_HOST_EVENT_GET_B, 0, NULL, 0, - (uint8_t **)&resp, sizeof(*resp)) < sizeof(*resp)) + (uint8_t **)&resp, sizeof(*resp)) < (int)sizeof(*resp)) return -1; if (resp->mask & EC_HOST_EVENT_MASK(EC_HOST_EVENT_INVALID)) @@ -474,7 +646,7 @@ int cros_ec_flash_protect(struct cros_ec_dev *dev, if (ec_command(dev, EC_CMD_FLASH_PROTECT, EC_VER_FLASH_PROTECT, ¶ms, sizeof(params), - resp, sizeof(*resp)) < sizeof(*resp)) + resp, sizeof(*resp)) != sizeof(*resp)) return -1; return 0; @@ -504,23 +676,30 @@ static int cros_ec_check_version(struct cros_ec_dev *dev) * * So for now, just read all the data anyway. */ - dev->cmd_version_is_supported = 1; + + /* Try sending a version 3 packet */ + dev->protocol_version = 3; + if (ec_command_inptr(dev, EC_CMD_HELLO, 0, &req, sizeof(req), + (uint8_t **)&resp, sizeof(*resp)) > 0) { + return 0; + } + + /* Try sending a version 2 packet */ + dev->protocol_version = 2; if (ec_command_inptr(dev, EC_CMD_HELLO, 0, &req, sizeof(req), (uint8_t **)&resp, sizeof(*resp)) > 0) { - /* It appears to understand new version commands */ - dev->cmd_version_is_supported = 1; - } else { - dev->cmd_version_is_supported = 0; - if (ec_command_inptr(dev, EC_CMD_HELLO, 0, &req, - sizeof(req), (uint8_t **)&resp, - sizeof(*resp)) < 0) { - debug("%s: Failed both old and new command style\n", - __func__); - return -1; - } + return 0; } - return 0; + /* + * Fail if we're still here, since the EC doesn't understand any + * protcol version we speak. Version 1 interface without command + * version is no longer supported, and we don't know about any new + * protocol versions. + */ + dev->protocol_version = 0; + printf("%s: ERROR: old EC interface not supported\n", __func__); + return -1; } int cros_ec_test(struct cros_ec_dev *dev) @@ -599,8 +778,8 @@ static int cros_ec_flash_write_block(struct cros_ec_dev *dev, p.offset = offset; p.size = size; - assert(data && p.size <= sizeof(p.data)); - memcpy(p.data, data, p.size); + assert(data && p.size <= EC_FLASH_WRITE_VER0_SIZE); + memcpy(&p + 1, data, p.size); return ec_command_inptr(dev, EC_CMD_FLASH_WRITE, 0, &p, sizeof(p), NULL, 0) >= 0 ? 0 : -1; @@ -611,8 +790,7 @@ static int cros_ec_flash_write_block(struct cros_ec_dev *dev, */ static int cros_ec_flash_write_burst_size(struct cros_ec_dev *dev) { - struct ec_params_flash_write p; - return sizeof(p.data); + return EC_FLASH_WRITE_VER0_SIZE; } /** @@ -718,7 +896,7 @@ int cros_ec_flash_update_rw(struct cros_ec_dev *dev, if (cros_ec_flash_offset(dev, EC_FLASH_REGION_RW, &rw_offset, &rw_size)) return -1; - if (image_size > rw_size) + if (image_size > (int)rw_size) return -1; /* Invalidate the existing hash, just in case the AP reboots @@ -804,7 +982,7 @@ int cros_ec_get_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t *state) if (ec_command_inptr(dev, EC_CMD_LDO_GET, 0, ¶ms, sizeof(params), - (uint8_t **)&resp, sizeof(*resp)) < sizeof(*resp)) + (uint8_t **)&resp, sizeof(*resp)) != sizeof(*resp)) return -1; *state = resp->state; @@ -813,7 +991,8 @@ int cros_ec_get_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t *state) } /** - * Decode MBKP details from the device tree and allocate a suitable device. + * Decode EC interface details from the device tree and allocate a suitable + * device. * * @param blob Device tree blob * @param node Node to decode from @@ -859,6 +1038,11 @@ static int cros_ec_decode_fdt(const void *blob, int node, dev->interface = CROS_EC_IF_LPC; break; #endif +#ifdef CONFIG_CROS_EC_SANDBOX + case COMPAT_SANDBOX_HOST_EMULATION: + dev->interface = CROS_EC_IF_SANDBOX; + break; +#endif default: debug("%s: Unknown compat id %d\n", __func__, compat); return -1; @@ -914,6 +1098,12 @@ int cros_ec_init(const void *blob, struct cros_ec_dev **cros_ecp) return -CROS_EC_ERR_DEV_INIT; break; #endif +#ifdef CONFIG_CROS_EC_SANDBOX + case CROS_EC_IF_SANDBOX: + if (cros_ec_sandbox_init(dev, blob)) + return -CROS_EC_ERR_DEV_INIT; + break; +#endif case CROS_EC_IF_NONE: default: return 0; @@ -941,7 +1131,6 @@ int cros_ec_init(const void *blob, struct cros_ec_dev **cros_ecp) return 0; } -#ifdef CONFIG_CMD_CROS_EC int cros_ec_decode_region(int argc, char * const argv[]) { if (argc > 0) { @@ -958,6 +1147,139 @@ int cros_ec_decode_region(int argc, char * const argv[]) return -1; } +int cros_ec_decode_ec_flash(const void *blob, struct fdt_cros_ec *config) +{ + int flash_node, node; + + node = fdtdec_next_compatible(blob, 0, COMPAT_GOOGLE_CROS_EC); + if (node < 0) { + debug("Failed to find chrome-ec node'\n"); + return -1; + } + + flash_node = fdt_subnode_offset(blob, node, "flash"); + if (flash_node < 0) { + debug("Failed to find flash node\n"); + return -1; + } + + if (fdtdec_read_fmap_entry(blob, flash_node, "flash", + &config->flash)) { + debug("Failed to decode flash node in chrome-ec'\n"); + return -1; + } + + config->flash_erase_value = fdtdec_get_int(blob, flash_node, + "erase-value", -1); + for (node = fdt_first_subnode(blob, flash_node); node >= 0; + node = fdt_next_subnode(blob, node)) { + const char *name = fdt_get_name(blob, node, NULL); + enum ec_flash_region region; + + if (0 == strcmp(name, "ro")) { + region = EC_FLASH_REGION_RO; + } else if (0 == strcmp(name, "rw")) { + region = EC_FLASH_REGION_RW; + } else if (0 == strcmp(name, "wp-ro")) { + region = EC_FLASH_REGION_WP_RO; + } else { + debug("Unknown EC flash region name '%s'\n", name); + return -1; + } + + if (fdtdec_read_fmap_entry(blob, node, "reg", + &config->region[region])) { + debug("Failed to decode flash region in chrome-ec'\n"); + return -1; + } + } + + return 0; +} + +int cros_ec_i2c_xfer(struct cros_ec_dev *dev, uchar chip, uint addr, + int alen, uchar *buffer, int len, int is_read) +{ + union { + struct ec_params_i2c_passthru p; + uint8_t outbuf[EC_PROTO2_MAX_PARAM_SIZE]; + } params; + union { + struct ec_response_i2c_passthru r; + uint8_t inbuf[EC_PROTO2_MAX_PARAM_SIZE]; + } response; + struct ec_params_i2c_passthru *p = ¶ms.p; + struct ec_response_i2c_passthru *r = &response.r; + struct ec_params_i2c_passthru_msg *msg = p->msg; + uint8_t *pdata; + int read_len, write_len; + int size; + int rv; + + p->port = 0; + + if (alen != 1) { + printf("Unsupported address length %d\n", alen); + return -1; + } + if (is_read) { + read_len = len; + write_len = alen; + p->num_msgs = 2; + } else { + read_len = 0; + write_len = alen + len; + p->num_msgs = 1; + } + + size = sizeof(*p) + p->num_msgs * sizeof(*msg); + if (size + write_len > sizeof(params)) { + puts("Params too large for buffer\n"); + return -1; + } + if (sizeof(*r) + read_len > sizeof(response)) { + puts("Read length too big for buffer\n"); + return -1; + } + + /* Create a message to write the register address and optional data */ + pdata = (uint8_t *)p + size; + msg->addr_flags = chip; + msg->len = write_len; + pdata[0] = addr; + if (!is_read) + memcpy(pdata + 1, buffer, len); + msg++; + + if (read_len) { + msg->addr_flags = chip | EC_I2C_FLAG_READ; + msg->len = read_len; + } + + rv = ec_command(dev, EC_CMD_I2C_PASSTHRU, 0, p, size + write_len, + r, sizeof(*r) + read_len); + if (rv < 0) + return rv; + + /* Parse response */ + if (r->i2c_status & EC_I2C_STATUS_ERROR) { + printf("Transfer failed with status=0x%x\n", r->i2c_status); + return -1; + } + + if (rv < sizeof(*r) + read_len) { + puts("Truncated read response\n"); + return -1; + } + + if (read_len) + memcpy(buffer, r->data, read_len); + + return 0; +} + +#ifdef CONFIG_CMD_CROS_EC + /** * Perform a flash read or write command * @@ -1011,6 +1333,187 @@ static int do_read_write(struct cros_ec_dev *dev, int is_write, int argc, return 0; } +/** + * get_alen() - Small parser helper function to get address length + * + * Returns the address length. + */ +static uint get_alen(char *arg) +{ + int j; + int alen; + + alen = 1; + for (j = 0; j < 8; j++) { + if (arg[j] == '.') { + alen = arg[j+1] - '0'; + break; + } else if (arg[j] == '\0') { + break; + } + } + return alen; +} + +#define DISP_LINE_LEN 16 + +/* + * TODO(sjg@chromium.org): This code copied almost verbatim from cmd_i2c.c + * so we can remove it later. + */ +static int cros_ec_i2c_md(struct cros_ec_dev *dev, int flag, int argc, + char * const argv[]) +{ + u_char chip; + uint addr, alen, length = 0x10; + int j, nbytes, linebytes; + + if (argc < 2) + return CMD_RET_USAGE; + + if (1 || (flag & CMD_FLAG_REPEAT) == 0) { + /* + * New command specified. + */ + + /* + * I2C chip address + */ + chip = simple_strtoul(argv[0], NULL, 16); + + /* + * I2C data address within the chip. This can be 1 or + * 2 bytes long. Some day it might be 3 bytes long :-). + */ + addr = simple_strtoul(argv[1], NULL, 16); + alen = get_alen(argv[1]); + if (alen > 3) + return CMD_RET_USAGE; + + /* + * If another parameter, it is the length to display. + * Length is the number of objects, not number of bytes. + */ + if (argc > 2) + length = simple_strtoul(argv[2], NULL, 16); + } + + /* + * Print the lines. + * + * We buffer all read data, so we can make sure data is read only + * once. + */ + nbytes = length; + do { + unsigned char linebuf[DISP_LINE_LEN]; + unsigned char *cp; + + linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes; + + if (cros_ec_i2c_xfer(dev, chip, addr, alen, linebuf, linebytes, + 1)) + puts("Error reading the chip.\n"); + else { + printf("%04x:", addr); + cp = linebuf; + for (j = 0; j < linebytes; j++) { + printf(" %02x", *cp++); + addr++; + } + puts(" "); + cp = linebuf; + for (j = 0; j < linebytes; j++) { + if ((*cp < 0x20) || (*cp > 0x7e)) + puts("."); + else + printf("%c", *cp); + cp++; + } + putc('\n'); + } + nbytes -= linebytes; + } while (nbytes > 0); + + return 0; +} + +static int cros_ec_i2c_mw(struct cros_ec_dev *dev, int flag, int argc, + char * const argv[]) +{ + uchar chip; + ulong addr; + uint alen; + uchar byte; + int count; + + if ((argc < 3) || (argc > 4)) + return CMD_RET_USAGE; + + /* + * Chip is always specified. + */ + chip = simple_strtoul(argv[0], NULL, 16); + + /* + * Address is always specified. + */ + addr = simple_strtoul(argv[1], NULL, 16); + alen = get_alen(argv[1]); + if (alen > 3) + return CMD_RET_USAGE; + + /* + * Value to write is always specified. + */ + byte = simple_strtoul(argv[2], NULL, 16); + + /* + * Optional count + */ + if (argc == 4) + count = simple_strtoul(argv[3], NULL, 16); + else + count = 1; + + while (count-- > 0) { + if (cros_ec_i2c_xfer(dev, chip, addr++, alen, &byte, 1, 0)) + puts("Error writing the chip.\n"); + /* + * Wait for the write to complete. The write can take + * up to 10mSec (we allow a little more time). + */ +/* + * No write delay with FRAM devices. + */ +#if !defined(CONFIG_SYS_I2C_FRAM) + udelay(11000); +#endif + } + + return 0; +} + +/* Temporary code until we have driver model and can use the i2c command */ +static int cros_ec_i2c_passthrough(struct cros_ec_dev *dev, int flag, + int argc, char * const argv[]) +{ + const char *cmd; + + if (argc < 1) + return CMD_RET_USAGE; + cmd = *argv++; + argc--; + if (0 == strcmp("md", cmd)) + cros_ec_i2c_md(dev, flag, argc, argv); + else if (0 == strcmp("mw", cmd)) + cros_ec_i2c_mw(dev, flag, argc, argv); + else + return CMD_RET_USAGE; + + return 0; +} + static int do_cros_ec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { struct cros_ec_dev *dev = last_dev; @@ -1044,7 +1547,7 @@ static int do_cros_ec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } printf("%s\n", id); } else if (0 == strcmp("info", cmd)) { - struct ec_response_cros_ec_info info; + struct ec_response_mkbp_info info; if (cros_ec_info(dev, &info)) { debug("%s: Could not read KBC info\n", __func__); @@ -1213,10 +1716,10 @@ static int do_cros_ec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (!ret) { /* Print versions */ printf("RO version: %1.*s\n", - sizeof(p->version_string_ro), + (int)sizeof(p->version_string_ro), p->version_string_ro); printf("RW version: %1.*s\n", - sizeof(p->version_string_rw), + (int)sizeof(p->version_string_rw), p->version_string_rw); printf("Firmware copy: %s\n", (p->current_image < @@ -1254,6 +1757,8 @@ static int do_cros_ec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) debug("%s: Could not access LDO%d\n", __func__, index); return ret; } + } else if (0 == strcmp("i2c", cmd)) { + ret = cros_ec_i2c_passthrough(dev, flag, argc - 2, argv + 2); } else { return CMD_RET_USAGE; } @@ -1267,7 +1772,7 @@ static int do_cros_ec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } U_BOOT_CMD( - crosec, 5, 1, do_cros_ec, + crosec, 6, 1, do_cros_ec, "CROS-EC utility command", "init Re-init CROS-EC (done on startup automatically)\n" "crosec id Read CROS-EC ID\n" @@ -1284,6 +1789,8 @@ U_BOOT_CMD( "crosec vbnvcontext [hexstring] Read [write] VbNvContext from EC\n" "crosec ldo <idx> [<state>] Switch/Read LDO state\n" "crosec test run tests on cros_ec\n" - "crosec version Read CROS-EC version" + "crosec version Read CROS-EC version\n" + "crosec i2c md chip address[.0, .1, .2] [# of objects] - read from I2C passthru\n" + "crosec i2c mw chip address[.0, .1, .2] value [count] - write to I2C passthru (fill)" ); #endif |
