1 files changed, 148 insertions, 0 deletions
diff --git a/drivers/ddr/microchip/ddr2_regs.h b/drivers/ddr/microchip/ddr2_regs.h
new file mode 100644
index 0000000000..0f4b159048
--- /dev/null
+++ b/drivers/ddr/microchip/ddr2_regs.h
@@ -0,0 +1,148 @@
+/*
+ * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ */
+
+#ifndef __MICROCHIP_DDR2_REGS_H
+#define __MICROCHIP_DDR2_REGS_H
+
+#include <linux/bitops.h>
+
+/* DDR2 Controller */
+struct ddr2_ctrl_regs {
+	u32 tsel;
+	u32 minlim;
+	u32 reqprd;
+	u32 mincmd;
+	u32 memcon;
+	u32 memcfg0;
+	u32 memcfg1;
+	u32 memcfg2;
+	u32 memcfg3;
+	u32 memcfg4;
+	u32 refcfg;
+	u32 pwrcfg;
+	u32 dlycfg0;
+	u32 dlycfg1;
+	u32 dlycfg2;
+	u32 dlycfg3;
+	u32 odtcfg;
+	u32 xfercfg;
+	u32 cmdissue;
+	u32 odtencfg;
+	u32 memwidth;
+	u32 unused[11];
+	u32 cmd10[16];
+	u32 cmd20[16];
+};
+
+/* Arbiter Config */
+#define MIN_LIM_WIDTH		5
+#define RQST_PERIOD_WIDTH	8
+#define MIN_CMDACPT_WIDTH	8
+
+/* Refresh Config */
+#define REFCNT_CLK(x)		(x)
+#define REFDLY_CLK(x)		((x) << 16)
+#define MAX_PEND_REF(x)		((x) << 24)
+
+/* Power Config */
+#define PRECH_PWR_DN_ONLY(x)	((x) << 22)
+#define SELF_REF_DLY(x)		((x) << 12)
+#define PWR_DN_DLY(x)		((x) << 4)
+#define EN_AUTO_SELF_REF(x)	((x) << 3)
+#define EN_AUTO_PWR_DN(x)	((x) << 2)
+#define ERR_CORR_EN(x)		((x) << 1)
+#define ECC_EN(x)		(x)
+
+/* Memory Width */
+#define HALF_RATE_MODE		BIT(3)
+
+/* Delay Config */
+#define ODTWLEN(x)	((x) << 20)
+#define ODTRLEN(x)	((x) << 16)
+#define ODTWDLY(x)	((x) << 12)
+#define ODTRDLY(x)	((x) << 8)
+
+/* Xfer Config */
+#define BIG_ENDIAN(x)	((x) << 31)
+#define MAX_BURST(x)	((x) << 24)
+#define RDATENDLY(x)	((x) << 16)
+#define NXDATAVDLY(x)	((x) << 4)
+#define NXTDATRQDLY(x)	((x) << 0)
+
+/* Host Commands */
+#define IDLE_NOP	0x00ffffff
+#define PRECH_ALL_CMD	0x00fff401
+#define REF_CMD		0x00fff801
+#define LOAD_MODE_CMD	0x00fff001
+#define CKE_LOW		0x00ffeffe
+
+#define NUM_HOST_CMDS	12
+
+/* Host CMD Issue */
+#define CMD_VALID	BIT(4)
+#define NUMHOSTCMD(x)	(x)
+
+/* Memory Control */
+#define INIT_DONE	BIT(1)
+#define INIT_START	BIT(0)
+
+/* Address Control */
+#define EN_AUTO_PRECH		0
+#define SB_PRI			1
+
+/* DDR2 Phy Register */
+struct ddr2_phy_regs {
+	u32 scl_start;
+	u32 unused1[2];
+	u32 scl_latency;
+	u32 unused2[2];
+	u32 scl_config_1;
+	u32 scl_config_2;
+	u32 pad_ctrl;
+	u32 dll_recalib;
+};
+
+/* PHY PAD CONTROL */
+#define ODT_SEL			BIT(0)
+#define ODT_EN			BIT(1)
+#define DRIVE_SEL(x)		((x) << 2)
+#define ODT_PULLDOWN(x)		((x) << 4)
+#define ODT_PULLUP(x)		((x) << 6)
+#define EXTRA_OEN_CLK(x)	((x) << 8)
+#define NOEXT_DLL		BIT(9)
+#define DLR_DFT_WRCMD		BIT(13)
+#define HALF_RATE		BIT(14)
+#define DRVSTR_PFET(x)		((x) << 16)
+#define DRVSTR_NFET(x)		((x) << 20)
+#define RCVR_EN			BIT(28)
+#define PREAMBLE_DLY(x)		((x) << 29)
+
+/* PHY DLL RECALIBRATE */
+#define RECALIB_CNT(x)		((x) << 8)
+#define DISABLE_RECALIB(x)	((x) << 26)
+#define DELAY_START_VAL(x)	((x) << 28)
+
+/* PHY SCL CONFIG1 */
+#define SCL_BURST8		BIT(0)
+#define SCL_DDR_CONNECTED		BIT(1)
+#define SCL_RCAS_LAT(x)		((x) << 4)
+#define SCL_ODTCSWW		BIT(24)
+
+/* PHY SCL CONFIG2 */
+#define SCL_CSEN		BIT(0)
+#define SCL_WCAS_LAT(x)		((x) << 8)
+
+/* PHY SCL Latency */
+#define SCL_CAPCLKDLY(x)	((x) << 0)
+#define SCL_DDRCLKDLY(x)	((x) << 4)
+
+/* PHY SCL START */
+#define SCL_START		BIT(28)
+#define SCL_EN			BIT(26)
+#define SCL_LUBPASS		(BIT(1) | BIT(0))
+
+#endif	/* __MICROCHIP_DDR2_REGS_H */