diff options
Diffstat (limited to 'drivers/ddr/marvell/axp/ddr3_spd.c')
| -rw-r--r-- | drivers/ddr/marvell/axp/ddr3_spd.c | 1300 |
1 files changed, 1300 insertions, 0 deletions
diff --git a/drivers/ddr/marvell/axp/ddr3_spd.c b/drivers/ddr/marvell/axp/ddr3_spd.c new file mode 100644 index 0000000000..f4f94c5c7e --- /dev/null +++ b/drivers/ddr/marvell/axp/ddr3_spd.c @@ -0,0 +1,1300 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <i2c.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "ddr3_init.h" + +#if defined(MV88F78X60) +#include "ddr3_axp_config.h" +#elif defined(MV88F67XX) +#include "ddr3_a370_config.h" +#endif + +#if defined(MV88F672X) +#include "ddr3_a375_config.h" +#endif + +#ifdef DUNIT_SPD + +/* DIMM SPD offsets */ +#define SPD_DEV_TYPE_BYTE 2 + +#define SPD_MODULE_TYPE_BYTE 3 +#define SPD_MODULE_MASK 0xf +#define SPD_MODULE_TYPE_RDIMM 1 +#define SPD_MODULE_TYPE_UDIMM 2 + +#define SPD_DEV_DENSITY_BYTE 4 +#define SPD_DEV_DENSITY_MASK 0xf + +#define SPD_ROW_NUM_BYTE 5 +#define SPD_ROW_NUM_MIN 12 +#define SPD_ROW_NUM_OFF 3 +#define SPD_ROW_NUM_MASK (7 << SPD_ROW_NUM_OFF) + +#define SPD_COL_NUM_BYTE 5 +#define SPD_COL_NUM_MIN 9 +#define SPD_COL_NUM_OFF 0 +#define SPD_COL_NUM_MASK (7 << SPD_COL_NUM_OFF) + +#define SPD_MODULE_ORG_BYTE 7 +#define SPD_MODULE_SDRAM_DEV_WIDTH_OFF 0 +#define SPD_MODULE_SDRAM_DEV_WIDTH_MASK (7 << SPD_MODULE_SDRAM_DEV_WIDTH_OFF) +#define SPD_MODULE_BANK_NUM_MIN 1 +#define SPD_MODULE_BANK_NUM_OFF 3 +#define SPD_MODULE_BANK_NUM_MASK (7 << SPD_MODULE_BANK_NUM_OFF) + +#define SPD_BUS_WIDTH_BYTE 8 +#define SPD_BUS_WIDTH_OFF 0 +#define SPD_BUS_WIDTH_MASK (7 << SPD_BUS_WIDTH_OFF) +#define SPD_BUS_ECC_OFF 3 +#define SPD_BUS_ECC_MASK (3 << SPD_BUS_ECC_OFF) + +#define SPD_MTB_DIVIDEND_BYTE 10 +#define SPD_MTB_DIVISOR_BYTE 11 +#define SPD_TCK_BYTE 12 +#define SPD_SUP_CAS_LAT_LSB_BYTE 14 +#define SPD_SUP_CAS_LAT_MSB_BYTE 15 +#define SPD_TAA_BYTE 16 +#define SPD_TWR_BYTE 17 +#define SPD_TRCD_BYTE 18 +#define SPD_TRRD_BYTE 19 +#define SPD_TRP_BYTE 20 + +#define SPD_TRAS_MSB_BYTE 21 +#define SPD_TRAS_MSB_MASK 0xf + +#define SPD_TRC_MSB_BYTE 21 +#define SPD_TRC_MSB_MASK 0xf0 + +#define SPD_TRAS_LSB_BYTE 22 +#define SPD_TRC_LSB_BYTE 23 +#define SPD_TRFC_LSB_BYTE 24 +#define SPD_TRFC_MSB_BYTE 25 +#define SPD_TWTR_BYTE 26 +#define SPD_TRTP_BYTE 27 + +#define SPD_TFAW_MSB_BYTE 28 +#define SPD_TFAW_MSB_MASK 0xf + +#define SPD_TFAW_LSB_BYTE 29 +#define SPD_OPT_FEATURES_BYTE 30 +#define SPD_THERMAL_REFRESH_OPT_BYTE 31 + +#define SPD_ADDR_MAP_BYTE 63 +#define SPD_ADDR_MAP_MIRROR_OFFS 0 + +#define SPD_RDIMM_RC_BYTE 69 +#define SPD_RDIMM_RC_NIBBLE_MASK 0xF +#define SPD_RDIMM_RC_NUM 16 + +/* Dimm Memory Type values */ +#define SPD_MEM_TYPE_SDRAM 0x4 +#define SPD_MEM_TYPE_DDR1 0x7 +#define SPD_MEM_TYPE_DDR2 0x8 +#define SPD_MEM_TYPE_DDR3 0xB + +#define DIMM_MODULE_MANU_OFFS 64 +#define DIMM_MODULE_MANU_SIZE 8 +#define DIMM_MODULE_VEN_OFFS 73 +#define DIMM_MODULE_VEN_SIZE 25 +#define DIMM_MODULE_ID_OFFS 99 +#define DIMM_MODULE_ID_SIZE 18 + +/* enumeration for voltage levels. */ +enum dimm_volt_if { + TTL_5V_TOLERANT, + LVTTL, + HSTL_1_5V, + SSTL_3_3V, + SSTL_2_5V, + VOLTAGE_UNKNOWN, +}; + +/* enumaration for SDRAM CAS Latencies. */ +enum dimm_sdram_cas { + SD_CL_1 = 1, + SD_CL_2, + SD_CL_3, + SD_CL_4, + SD_CL_5, + SD_CL_6, + SD_CL_7, + SD_FAULT +}; + +/* enumeration for memory types */ +enum memory_type { + MEM_TYPE_SDRAM, + MEM_TYPE_DDR1, + MEM_TYPE_DDR2, + MEM_TYPE_DDR3 +}; + +/* DIMM information structure */ +typedef struct dimm_info { + /* DIMM dimensions */ + u32 num_of_module_ranks; + u32 data_width; + u32 rank_capacity; + u32 num_of_devices; + + u32 sdram_width; + u32 num_of_banks_on_each_device; + u32 sdram_capacity; + + u32 num_of_row_addr; + u32 num_of_col_addr; + + u32 addr_mirroring; + + u32 err_check_type; /* ECC , PARITY.. */ + u32 type_info; /* DDR2 only */ + + /* DIMM timing parameters */ + u32 supported_cas_latencies; + u32 refresh_interval; + u32 min_cycle_time; + u32 min_row_precharge_time; + u32 min_row_active_to_row_active; + u32 min_ras_to_cas_delay; + u32 min_write_recovery_time; /* DDR3/2 only */ + u32 min_write_to_read_cmd_delay; /* DDR3/2 only */ + u32 min_read_to_prech_cmd_delay; /* DDR3/2 only */ + u32 min_active_to_precharge; + u32 min_refresh_recovery; /* DDR3/2 only */ + u32 min_cas_lat_time; + u32 min_four_active_win_delay; + u8 dimm_rc[SPD_RDIMM_RC_NUM]; + + /* DIMM vendor ID */ + u32 vendor; +} MV_DIMM_INFO; + +static int ddr3_spd_sum_init(MV_DIMM_INFO *info, MV_DIMM_INFO *sum_info, + u32 dimm); +static u32 ddr3_get_max_val(u32 spd_val, u32 dimm_num, u32 static_val); +static u32 ddr3_get_min_val(u32 spd_val, u32 dimm_num, u32 static_val); +static int ddr3_spd_init(MV_DIMM_INFO *info, u32 dimm_addr, u32 dimm_width); +static u32 ddr3_div(u32 val, u32 divider, u32 sub); + +extern u8 spd_data[SPD_SIZE]; +extern u32 odt_config[ODT_OPT]; +extern u16 odt_static[ODT_OPT][MAX_CS]; +extern u16 odt_dynamic[ODT_OPT][MAX_CS]; + +#if !(defined(DB_88F6710) || defined(DB_88F6710_PCAC) || defined(RD_88F6710)) +/* + * Name: ddr3_get_dimm_num - Find number of dimms and their addresses + * Desc: + * Args: dimm_addr - array of dimm addresses + * Notes: + * Returns: None. + */ +static u32 ddr3_get_dimm_num(u32 *dimm_addr) +{ + u32 dimm_cur_addr; + u8 data[3]; + u32 dimm_num = 0; + int ret; + + /* Read the dimm eeprom */ + for (dimm_cur_addr = MAX_DIMM_ADDR; dimm_cur_addr > MIN_DIMM_ADDR; + dimm_cur_addr--) { + data[SPD_DEV_TYPE_BYTE] = 0; + + /* Far-End DIMM must be connected */ + if ((dimm_num == 0) && (dimm_cur_addr < FAR_END_DIMM_ADDR)) + return 0; + + ret = i2c_read(dimm_cur_addr, 0, 1, (uchar *)data, 3); + if (!ret) { + if (data[SPD_DEV_TYPE_BYTE] == SPD_MEM_TYPE_DDR3) { + dimm_addr[dimm_num] = dimm_cur_addr; + dimm_num++; + } + } + } + + return dimm_num; +} +#endif + +/* + * Name: dimmSpdInit - Get the SPD parameters. + * Desc: Read the DIMM SPD parameters into given struct parameter. + * Args: dimmNum - DIMM number. See MV_BOARD_DIMM_NUM enumerator. + * info - DIMM information structure. + * Notes: + * Returns: MV_OK if function could read DIMM parameters, 0 otherwise. + */ +int ddr3_spd_init(MV_DIMM_INFO *info, u32 dimm_addr, u32 dimm_width) +{ + u32 tmp; + u32 time_base; + int ret; + __maybe_unused u32 rc; + __maybe_unused u8 vendor_high, vendor_low; + + if (dimm_addr != 0) { + memset(spd_data, 0, SPD_SIZE * sizeof(u8)); + + ret = i2c_read(dimm_addr, 0, 1, (uchar *)spd_data, SPD_SIZE); + if (ret) + return MV_DDR3_TRAINING_ERR_TWSI_FAIL; + } + + /* Check if DDR3 */ + if (spd_data[SPD_DEV_TYPE_BYTE] != SPD_MEM_TYPE_DDR3) + return MV_DDR3_TRAINING_ERR_TWSI_BAD_TYPE; + + /* Error Check Type */ + /* No byte for error check in DDR3 SPD, use DDR2 convention */ + info->err_check_type = 0; + + /* Check if ECC */ + if ((spd_data[SPD_BUS_WIDTH_BYTE] & 0x18) >> 3) + info->err_check_type = 1; + + DEBUG_INIT_FULL_C("DRAM err_check_type ", info->err_check_type, 1); + switch (spd_data[SPD_MODULE_TYPE_BYTE]) { + case 1: + /* support RDIMM */ + info->type_info = SPD_MODULE_TYPE_RDIMM; + break; + case 2: + /* support UDIMM */ + info->type_info = SPD_MODULE_TYPE_UDIMM; + break; + case 11: /* LRDIMM current not supported */ + default: + info->type_info = (spd_data[SPD_MODULE_TYPE_BYTE]); + break; + } + + /* Size Calculations: */ + + /* Number Of Row Addresses - 12/13/14/15/16 */ + info->num_of_row_addr = + (spd_data[SPD_ROW_NUM_BYTE] & SPD_ROW_NUM_MASK) >> + SPD_ROW_NUM_OFF; + info->num_of_row_addr += SPD_ROW_NUM_MIN; + DEBUG_INIT_FULL_C("DRAM num_of_row_addr ", info->num_of_row_addr, 2); + + /* Number Of Column Addresses - 9/10/11/12 */ + info->num_of_col_addr = + (spd_data[SPD_COL_NUM_BYTE] & SPD_COL_NUM_MASK) >> + SPD_COL_NUM_OFF; + info->num_of_col_addr += SPD_COL_NUM_MIN; + DEBUG_INIT_FULL_C("DRAM num_of_col_addr ", info->num_of_col_addr, 1); + + /* Number Of Ranks = number of CS on Dimm - 1/2/3/4 Ranks */ + info->num_of_module_ranks = + (spd_data[SPD_MODULE_ORG_BYTE] & SPD_MODULE_BANK_NUM_MASK) >> + SPD_MODULE_BANK_NUM_OFF; + info->num_of_module_ranks += SPD_MODULE_BANK_NUM_MIN; + DEBUG_INIT_FULL_C("DRAM numOfModuleBanks ", info->num_of_module_ranks, + 1); + + /* Data Width - 8/16/32/64 bits */ + info->data_width = + 1 << (3 + (spd_data[SPD_BUS_WIDTH_BYTE] & SPD_BUS_WIDTH_MASK)); + DEBUG_INIT_FULL_C("DRAM data_width ", info->data_width, 1); + + /* Number Of Banks On Each Device - 8/16/32/64 banks */ + info->num_of_banks_on_each_device = + 1 << (3 + ((spd_data[SPD_DEV_DENSITY_BYTE] >> 4) & 0x7)); + DEBUG_INIT_FULL_C("DRAM num_of_banks_on_each_device ", + info->num_of_banks_on_each_device, 1); + + /* Total SDRAM capacity - 256Mb/512Mb/1Gb/2Gb/4Gb/8Gb/16Gb - MegaBits */ + info->sdram_capacity = + spd_data[SPD_DEV_DENSITY_BYTE] & SPD_DEV_DENSITY_MASK; + + /* Sdram Width - 4/8/16/32 bits */ + info->sdram_width = 1 << (2 + (spd_data[SPD_MODULE_ORG_BYTE] & + SPD_MODULE_SDRAM_DEV_WIDTH_MASK)); + DEBUG_INIT_FULL_C("DRAM sdram_width ", info->sdram_width, 1); + + /* CS (Rank) Capacity - MB */ + /* + * DDR3 device uiDensity val are: (device capacity/8) * + * (Module_width/Device_width) + */ + /* Jedec SPD DDR3 - page 7, Save spd_data in Mb - 2048=2GB */ + if (dimm_width == 32) { + info->rank_capacity = + ((1 << info->sdram_capacity) * 256 * + (info->data_width / info->sdram_width)) << 16; + /* CS size = CS size / 2 */ + } else { + info->rank_capacity = + ((1 << info->sdram_capacity) * 256 * + (info->data_width / info->sdram_width) * 0x2) << 16; + /* 0x2 => 0x100000-1Mbit / 8-bit->byte / 0x10000 */ + } + DEBUG_INIT_FULL_C("DRAM rank_capacity[31] ", info->rank_capacity, 1); + + /* Number of devices includeing Error correction */ + info->num_of_devices = + ((info->data_width / info->sdram_width) * + info->num_of_module_ranks) + info->err_check_type; + DEBUG_INIT_FULL_C("DRAM num_of_devices ", info->num_of_devices, 1); + + /* Address Mapping from Edge connector to DRAM - mirroring option */ + info->addr_mirroring = + spd_data[SPD_ADDR_MAP_BYTE] & (1 << SPD_ADDR_MAP_MIRROR_OFFS); + + /* Timings - All in ps */ + + time_base = (1000 * spd_data[SPD_MTB_DIVIDEND_BYTE]) / + spd_data[SPD_MTB_DIVISOR_BYTE]; + + /* Minimum Cycle Time At Max CasLatancy */ + info->min_cycle_time = spd_data[SPD_TCK_BYTE] * time_base; + DEBUG_INIT_FULL_C("DRAM tCKmin ", info->min_cycle_time, 1); + + /* Refresh Interval */ + /* No byte for refresh interval in DDR3 SPD, use DDR2 convention */ + /* + * JEDEC param are 0 <= Tcase <= 85: 7.8uSec, 85 <= Tcase + * <= 95: 3.9uSec + */ + info->refresh_interval = 7800000; /* Set to 7.8uSec */ + DEBUG_INIT_FULL_C("DRAM refresh_interval ", info->refresh_interval, 1); + + /* Suported Cas Latencies - DDR 3: */ + + /* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-*******-******* + CAS = 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 * + *********************************************************-******* + *******-******-******-******-******-******-******-*******-******* + * bit15 |bit14 |bit13 |bit12 |bit11 |bit10 | bit9 | bit8 * + *******-******-******-******-******-******-******-*******-******* + CAS = TBD | 18 | 17 | 16 | 15 | 14 | 13 | 12 * + */ + + /* DDR3 include 2 byte of CAS support */ + info->supported_cas_latencies = + (spd_data[SPD_SUP_CAS_LAT_MSB_BYTE] << 8) | + spd_data[SPD_SUP_CAS_LAT_LSB_BYTE]; + DEBUG_INIT_FULL_C("DRAM supported_cas_latencies ", + info->supported_cas_latencies, 1); + + /* Minimum Cycle Time At Max CasLatancy */ + info->min_cas_lat_time = (spd_data[SPD_TAA_BYTE] * time_base); + /* + * This field divided by the cycleTime will give us the CAS latency + * to config + */ + + /* + * For DDR3 and DDR2 includes Write Recovery Time field. + * Other SDRAM ignore + */ + info->min_write_recovery_time = spd_data[SPD_TWR_BYTE] * time_base; + DEBUG_INIT_FULL_C("DRAM min_write_recovery_time ", + info->min_write_recovery_time, 1); + + /* Mininmum Ras to Cas Delay */ + info->min_ras_to_cas_delay = spd_data[SPD_TRCD_BYTE] * time_base; + DEBUG_INIT_FULL_C("DRAM min_ras_to_cas_delay ", + info->min_ras_to_cas_delay, 1); + + /* Minimum Row Active to Row Active Time */ + info->min_row_active_to_row_active = + spd_data[SPD_TRRD_BYTE] * time_base; + DEBUG_INIT_FULL_C("DRAM min_row_active_to_row_active ", + info->min_row_active_to_row_active, 1); + + /* Minimum Row Precharge Delay Time */ + info->min_row_precharge_time = spd_data[SPD_TRP_BYTE] * time_base; + DEBUG_INIT_FULL_C("DRAM min_row_precharge_time ", + info->min_row_precharge_time, 1); + + /* Minimum Active to Precharge Delay Time - tRAS ps */ + info->min_active_to_precharge = + (spd_data[SPD_TRAS_MSB_BYTE] & SPD_TRAS_MSB_MASK) << 8; + info->min_active_to_precharge |= spd_data[SPD_TRAS_LSB_BYTE]; + info->min_active_to_precharge *= time_base; + DEBUG_INIT_FULL_C("DRAM min_active_to_precharge ", + info->min_active_to_precharge, 1); + + /* Minimum Refresh Recovery Delay Time - tRFC ps */ + info->min_refresh_recovery = spd_data[SPD_TRFC_MSB_BYTE] << 8; + info->min_refresh_recovery |= spd_data[SPD_TRFC_LSB_BYTE]; + info->min_refresh_recovery *= time_base; + DEBUG_INIT_FULL_C("DRAM min_refresh_recovery ", + info->min_refresh_recovery, 1); + + /* + * For DDR3 and DDR2 includes Internal Write To Read Command Delay + * field. + */ + info->min_write_to_read_cmd_delay = spd_data[SPD_TWTR_BYTE] * time_base; + DEBUG_INIT_FULL_C("DRAM min_write_to_read_cmd_delay ", + info->min_write_to_read_cmd_delay, 1); + + /* + * For DDR3 and DDR2 includes Internal Read To Precharge Command Delay + * field. + */ + info->min_read_to_prech_cmd_delay = spd_data[SPD_TRTP_BYTE] * time_base; + DEBUG_INIT_FULL_C("DRAM min_read_to_prech_cmd_delay ", + info->min_read_to_prech_cmd_delay, 1); + + /* + * For DDR3 includes Minimum Activate to Activate/Refresh Command + * field + */ + tmp = ((spd_data[SPD_TFAW_MSB_BYTE] & SPD_TFAW_MSB_MASK) << 8) | + spd_data[SPD_TFAW_LSB_BYTE]; + info->min_four_active_win_delay = tmp * time_base; + DEBUG_INIT_FULL_C("DRAM min_four_active_win_delay ", + info->min_four_active_win_delay, 1); + +#if defined(MV88F78X60) || defined(MV88F672X) + /* Registered DIMM support */ + if (info->type_info == SPD_MODULE_TYPE_RDIMM) { + for (rc = 2; rc < 6; rc += 2) { + tmp = spd_data[SPD_RDIMM_RC_BYTE + rc / 2]; + info->dimm_rc[rc] = + spd_data[SPD_RDIMM_RC_BYTE + rc / 2] & + SPD_RDIMM_RC_NIBBLE_MASK; + info->dimm_rc[rc + 1] = + (spd_data[SPD_RDIMM_RC_BYTE + rc / 2] >> 4) & + SPD_RDIMM_RC_NIBBLE_MASK; + } + + vendor_low = spd_data[66]; + vendor_high = spd_data[65]; + info->vendor = (vendor_high << 8) + vendor_low; + DEBUG_INIT_C("DDR3 Training Sequence - Registered DIMM vendor ID 0x", + info->vendor, 4); + + info->dimm_rc[0] = RDIMM_RC0; + info->dimm_rc[1] = RDIMM_RC1; + info->dimm_rc[2] = RDIMM_RC2; + info->dimm_rc[8] = RDIMM_RC8; + info->dimm_rc[9] = RDIMM_RC9; + info->dimm_rc[10] = RDIMM_RC10; + info->dimm_rc[11] = RDIMM_RC11; + } +#endif + + return MV_OK; +} + +/* + * Name: ddr3_spd_sum_init - Get the SPD parameters. + * Desc: Read the DIMM SPD parameters into given struct parameter. + * Args: dimmNum - DIMM number. See MV_BOARD_DIMM_NUM enumerator. + * info - DIMM information structure. + * Notes: + * Returns: MV_OK if function could read DIMM parameters, 0 otherwise. + */ +int ddr3_spd_sum_init(MV_DIMM_INFO *info, MV_DIMM_INFO *sum_info, u32 dimm) +{ + if (dimm == 0) { + memcpy(sum_info, info, sizeof(MV_DIMM_INFO)); + return MV_OK; + } + if (sum_info->type_info != info->type_info) { + DEBUG_INIT_S("DDR3 Dimm Compare - DIMM type does not match - FAIL\n"); + return MV_DDR3_TRAINING_ERR_DIMM_TYPE_NO_MATCH; + } + if (sum_info->err_check_type > info->err_check_type) { + sum_info->err_check_type = info->err_check_type; + DEBUG_INIT_S("DDR3 Dimm Compare - ECC does not match. ECC is disabled\n"); + } + if (sum_info->data_width != info->data_width) { + DEBUG_INIT_S("DDR3 Dimm Compare - DRAM bus width does not match - FAIL\n"); + return MV_DDR3_TRAINING_ERR_BUS_WIDTH_NOT_MATCH; + } + if (sum_info->min_cycle_time < info->min_cycle_time) + sum_info->min_cycle_time = info->min_cycle_time; + if (sum_info->refresh_interval < info->refresh_interval) + sum_info->refresh_interval = info->refresh_interval; + sum_info->supported_cas_latencies &= info->supported_cas_latencies; + if (sum_info->min_cas_lat_time < info->min_cas_lat_time) + sum_info->min_cas_lat_time = info->min_cas_lat_time; + if (sum_info->min_write_recovery_time < info->min_write_recovery_time) + sum_info->min_write_recovery_time = + info->min_write_recovery_time; + if (sum_info->min_ras_to_cas_delay < info->min_ras_to_cas_delay) + sum_info->min_ras_to_cas_delay = info->min_ras_to_cas_delay; + if (sum_info->min_row_active_to_row_active < + info->min_row_active_to_row_active) + sum_info->min_row_active_to_row_active = + info->min_row_active_to_row_active; + if (sum_info->min_row_precharge_time < info->min_row_precharge_time) + sum_info->min_row_precharge_time = info->min_row_precharge_time; + if (sum_info->min_active_to_precharge < info->min_active_to_precharge) + sum_info->min_active_to_precharge = + info->min_active_to_precharge; + if (sum_info->min_refresh_recovery < info->min_refresh_recovery) + sum_info->min_refresh_recovery = info->min_refresh_recovery; + if (sum_info->min_write_to_read_cmd_delay < + info->min_write_to_read_cmd_delay) + sum_info->min_write_to_read_cmd_delay = + info->min_write_to_read_cmd_delay; + if (sum_info->min_read_to_prech_cmd_delay < + info->min_read_to_prech_cmd_delay) + sum_info->min_read_to_prech_cmd_delay = + info->min_read_to_prech_cmd_delay; + if (sum_info->min_four_active_win_delay < + info->min_four_active_win_delay) + sum_info->min_four_active_win_delay = + info->min_four_active_win_delay; + if (sum_info->min_write_to_read_cmd_delay < + info->min_write_to_read_cmd_delay) + sum_info->min_write_to_read_cmd_delay = + info->min_write_to_read_cmd_delay; + + return MV_OK; +} + +/* + * Name: ddr3_dunit_setup + * Desc: Set the controller with the timing values. + * Args: ecc_ena - User ECC setup + * Notes: + * Returns: + */ +int ddr3_dunit_setup(u32 ecc_ena, u32 hclk_time, u32 *ddr_width) +{ + u32 reg, tmp, cwl; + u32 ddr_clk_time; + MV_DIMM_INFO dimm_info[2]; + MV_DIMM_INFO sum_info; + u32 stat_val, spd_val; + u32 cs, cl, cs_num, cs_ena; + u32 dimm_num = 0; + int status; + u32 rc; + __maybe_unused u32 dimm_cnt, cs_count, dimm; + __maybe_unused u32 dimm_addr[2] = { 0, 0 }; + +#if defined(DB_88F6710) || defined(DB_88F6710_PCAC) || defined(RD_88F6710) + /* Armada 370 - SPD is not available on DIMM */ + /* + * Set MC registers according to Static SPD values Values - + * must be set manually + */ + /* + * We only have one optional DIMM for the DB and we already got the + * SPD matching values + */ + status = ddr3_spd_init(&dimm_info[0], 0, *ddr_width); + if (MV_OK != status) + return status; + + dimm_num = 1; + /* Use JP8 to enable multiCS support for Armada 370 DB */ + if (!ddr3_check_config(EEPROM_MODULE_ADDR, CONFIG_MULTI_CS)) + dimm_info[0].num_of_module_ranks = 1; + status = ddr3_spd_sum_init(&dimm_info[0], &sum_info, 0); + if (MV_OK != status) + return status; +#else + /* Dynamic D-Unit Setup - Read SPD values */ +#ifdef DUNIT_SPD + dimm_num = ddr3_get_dimm_num(dimm_addr); + if (dimm_num == 0) { +#ifdef MIXED_DIMM_STATIC + DEBUG_INIT_S("DDR3 Training Sequence - No DIMMs detected\n"); +#else + DEBUG_INIT_S("DDR3 Training Sequence - FAILED (Wrong DIMMs Setup)\n"); + return MV_DDR3_TRAINING_ERR_BAD_DIMM_SETUP; +#endif + } else { + DEBUG_INIT_C("DDR3 Training Sequence - Number of DIMMs detected: ", + dimm_num, 1); + } + + for (dimm = 0; dimm < dimm_num; dimm++) { + status = ddr3_spd_init(&dimm_info[dimm], dimm_addr[dimm], + *ddr_width); + if (MV_OK != status) + return status; + status = ddr3_spd_sum_init(&dimm_info[dimm], &sum_info, dimm); + if (MV_OK != status) + return status; + } +#endif +#endif + + /* Set number of enabled CS */ + cs_num = 0; +#ifdef DUNIT_STATIC + cs_num = ddr3_get_cs_num_from_reg(); +#endif +#ifdef DUNIT_SPD + for (dimm = 0; dimm < dimm_num; dimm++) + cs_num += dimm_info[dimm].num_of_module_ranks; +#endif + if (cs_num > MAX_CS) { + DEBUG_INIT_C("DDR3 Training Sequence - Number of CS exceed limit - ", + MAX_CS, 1); + return MV_DDR3_TRAINING_ERR_MAX_CS_LIMIT; + } + + /* Set bitmap of enabled CS */ + cs_ena = 0; +#ifdef DUNIT_STATIC + cs_ena = ddr3_get_cs_ena_from_reg(); +#endif +#ifdef DUNIT_SPD + dimm = 0; + + if (dimm_num) { + for (cs = 0; cs < MAX_CS; cs += 2) { + if (((1 << cs) & DIMM_CS_BITMAP) && + !(cs_ena & (1 << cs))) { + if (dimm_info[dimm].num_of_module_ranks == 1) + cs_ena |= (0x1 << cs); + else if (dimm_info[dimm].num_of_module_ranks == 2) + cs_ena |= (0x3 << cs); + else if (dimm_info[dimm].num_of_module_ranks == 3) + cs_ena |= (0x7 << cs); + else if (dimm_info[dimm].num_of_module_ranks == 4) + cs_ena |= (0xF << cs); + + dimm++; + if (dimm == dimm_num) + break; + } + } + } +#endif + + if (cs_ena > 0xF) { + DEBUG_INIT_C("DDR3 Training Sequence - Number of enabled CS exceed limit - ", + MAX_CS, 1); + return MV_DDR3_TRAINING_ERR_MAX_ENA_CS_LIMIT; + } + + DEBUG_INIT_FULL_C("DDR3 - DUNIT-SET - Number of CS = ", cs_num, 1); + + /* Check Ratio - '1' - 2:1, '0' - 1:1 */ + if (reg_read(REG_DDR_IO_ADDR) & (1 << REG_DDR_IO_CLK_RATIO_OFFS)) + ddr_clk_time = hclk_time / 2; + else + ddr_clk_time = hclk_time; + +#ifdef DUNIT_STATIC + /* Get target CL value from set register */ + reg = (reg_read(REG_DDR3_MR0_ADDR) >> 2); + reg = ((((reg >> 1) & 0xE)) | (reg & 0x1)) & 0xF; + + cl = ddr3_get_max_val(ddr3_div(sum_info.min_cas_lat_time, + ddr_clk_time, 0), + dimm_num, ddr3_valid_cl_to_cl(reg)); +#else + cl = ddr3_div(sum_info.min_cas_lat_time, ddr_clk_time, 0); +#endif + if (cl < 5) + cl = 5; + + DEBUG_INIT_FULL_C("DDR3 - DUNIT-SET - Cas Latency = ", cl, 1); + + /* {0x00001400} - DDR SDRAM Configuration Register */ + reg = 0x73004000; + stat_val = ddr3_get_static_mc_value( + REG_SDRAM_CONFIG_ADDR, REG_SDRAM_CONFIG_ECC_OFFS, 0x1, 0, 0); + if (ecc_ena && ddr3_get_min_val(sum_info.err_check_type, dimm_num, + stat_val)) { + reg |= (1 << REG_SDRAM_CONFIG_ECC_OFFS); + reg |= (1 << REG_SDRAM_CONFIG_IERR_OFFS); + DEBUG_INIT_FULL_S("DDR3 - DUNIT-SET - ECC Enabled\n"); + } else { + DEBUG_INIT_FULL_S("DDR3 - DUNIT-SET - ECC Disabled\n"); + } + + if (sum_info.type_info == SPD_MODULE_TYPE_RDIMM) { +#ifdef DUNIT_STATIC + DEBUG_INIT_S("DDR3 Training Sequence - FAIL - Illegal R-DIMM setup\n"); + return MV_DDR3_TRAINING_ERR_BAD_R_DIMM_SETUP; +#endif + reg |= (1 << REG_SDRAM_CONFIG_REGDIMM_OFFS); + DEBUG_INIT_FULL_S("DDR3 - DUNIT-SET - R-DIMM\n"); + } else { + DEBUG_INIT_FULL_S("DDR3 - DUNIT-SET - U-DIMM\n"); + } + +#ifndef MV88F67XX +#ifdef DUNIT_STATIC + if (ddr3_get_min_val(sum_info.data_width, dimm_num, BUS_WIDTH) == 64) { +#else + if (*ddr_width == 64) { +#endif + reg |= (1 << REG_SDRAM_CONFIG_WIDTH_OFFS); + DEBUG_INIT_FULL_S("DDR3 - DUNIT-SET - Datawidth - 64Bits\n"); + } else { + DEBUG_INIT_FULL_S("DDR3 - DUNIT-SET - Datawidth - 32Bits\n"); + } +#else + DEBUG_INIT_FULL_S("DDR3 - DUNIT-SET - Datawidth - 16Bits\n"); +#endif + +#if defined(MV88F672X) + if (*ddr_width == 32) { + reg |= (1 << REG_SDRAM_CONFIG_WIDTH_OFFS); + DEBUG_INIT_FULL_S("DDR3 - DUNIT-SET - Datawidth - 32Bits\n"); + } else { + DEBUG_INIT_FULL_S("DDR3 - DUNIT-SET - Datawidth - 16Bits\n"); + } +#endif + stat_val = ddr3_get_static_mc_value(REG_SDRAM_CONFIG_ADDR, 0, + REG_SDRAM_CONFIG_RFRS_MASK, 0, 0); + tmp = ddr3_get_min_val(sum_info.refresh_interval / hclk_time, + dimm_num, stat_val); + +#ifdef TREFI_USER_EN + tmp = min(TREFI_USER / hclk_time, tmp); +#endif + + DEBUG_INIT_FULL_C("DDR3 - DUNIT-SET - RefreshInterval/Hclk = ", tmp, 4); + reg |= tmp; + + if (cl != 3) + reg |= (1 << 16); /* If 2:1 need to set P2DWr */ + +#if defined(MV88F672X) + reg |= (1 << 27); /* PhyRfRST = Disable */ +#endif + reg_write(REG_SDRAM_CONFIG_ADDR, reg); + + /*{0x00001404} - DDR SDRAM Configuration Register */ + reg = 0x3630B800; +#ifdef DUNIT_SPD + reg |= (DRAM_2T << REG_DUNIT_CTRL_LOW_2T_OFFS); +#endif + reg_write(REG_DUNIT_CTRL_LOW_ADDR, reg); + + /* {0x00001408} - DDR SDRAM Timing (Low) Register */ + reg = 0x0; + + /* tRAS - (0:3,20) */ + spd_val = ddr3_div(sum_info.min_active_to_precharge, + ddr_clk_time, 1); + stat_val = ddr3_get_static_mc_value(REG_SDRAM_TIMING_LOW_ADDR, + 0, 0xF, 16, 0x10); + tmp = ddr3_get_max_val(spd_val, dimm_num, stat_val); + DEBUG_INIT_FULL_C("DDR3 - DUNIT-SET - tRAS-1 = ", tmp, 1); + reg |= (tmp & 0xF); + reg |= ((tmp & 0x10) << 16); /* to bit 20 */ + + /* tRCD - (4:7) */ + spd_val = ddr3_div(sum_info.min_ras_to_cas_delay, ddr_clk_time, 1); + stat_val = ddr3_get_static_mc_value(REG_SDRAM_TIMING_LOW_ADDR, + 4, 0xF, 0, 0); + tmp = ddr3_get_max_val(spd_val, dimm_num, stat_val); + DEBUG_INIT_FULL_C("DDR3 - DUNIT-SET - tRCD-1 = ", tmp, 1); + reg |= ((tmp & 0xF) << 4); + + /* tRP - (8:11) */ + spd_val = ddr3_div(sum_info.min_row_precharge_time, ddr_clk_time, 1); + stat_val = ddr3_get_static_mc_value(REG_SDRAM_TIMING_LOW_ADDR, + 8, 0xF, 0, 0); + tmp = ddr3_get_max_val(spd_val, dimm_num, stat_val); + DEBUG_INIT_FULL_C("DDR3 - DUNIT-SET - tRP-1 = ", tmp, 1); + reg |= ((tmp & 0xF) << 8); + + /* tWR - (12:15) */ + spd_val = ddr3_div(sum_info.min_write_recovery_time, ddr_clk_time, 1); + stat_val = ddr3_get_static_mc_value(REG_SDRAM_TIMING_LOW_ADDR, + 12, 0xF, 0, 0); + tmp = ddr3_get_max_val(spd_val, dimm_num, stat_val); + DEBUG_INIT_FULL_C("DDR3 - DUNIT-SET - tWR-1 = ", tmp, 1); + reg |= ((tmp & 0xF) << 12); + + /* tWTR - (16:19) */ + spd_val = ddr3_div(sum_info.min_write_to_read_cmd_delay, ddr_clk_time, 1); + stat_val = ddr3_get_static_mc_value(REG_SDRAM_TIMING_LOW_ADDR, + 16, 0xF, 0, 0); + tmp = ddr3_get_max_val(spd_val, dimm_num, stat_val); + DEBUG_INIT_FULL_C("DDR3 - DUNIT-SET - tWTR-1 = ", tmp, 1); + reg |= ((tmp & 0xF) << 16); + + /* tRRD - (24:27) */ + spd_val = ddr3_div(sum_info.min_row_active_to_row_active, ddr_clk_time, 1); + stat_val = ddr3_get_static_mc_value(REG_SDRAM_TIMING_LOW_ADDR, + 24, 0xF, 0, 0); + tmp = ddr3_get_max_val(spd_val, dimm_num, stat_val); + DEBUG_INIT_FULL_C("DDR3 - DUNIT-SET - tRRD-1 = ", tmp, 1); + reg |= ((tmp & 0xF) << 24); + + /* tRTP - (28:31) */ + spd_val = ddr3_div(sum_info.min_read_to_prech_cmd_delay, ddr_clk_time, 1); + stat_val = ddr3_get_static_mc_value(REG_SDRAM_TIMING_LOW_ADDR, + 28, 0xF, 0, 0); + tmp = ddr3_get_max_val(spd_val, dimm_num, stat_val); + DEBUG_INIT_FULL_C("DDR3 - DUNIT-SET - tRTP-1 = ", tmp, 1); + reg |= ((tmp & 0xF) << 28); + + if (cl < 7) + reg = 0x33137663; + + reg_write(REG_SDRAM_TIMING_LOW_ADDR, reg); + + /*{0x0000140C} - DDR SDRAM Timing (High) Register */ + /* Add cycles to R2R W2W */ + reg = 0x39F8FF80; + + /* tRFC - (0:6,16:18) */ + spd_val = ddr3_div(sum_info.min_refresh_recovery, ddr_clk_time, 1); + stat_val = ddr3_get_static_mc_value(REG_SDRAM_TIMING_HIGH_ADDR, + 0, 0x7F, 9, 0x380); + tmp = ddr3_get_max_val(spd_val, dimm_num, stat_val); + DEBUG_INIT_FULL_C("DDR3 - DUNIT-SET - tRFC-1 = ", tmp, 1); + reg |= (tmp & 0x7F); + reg |= ((tmp & 0x380) << 9); /* to bit 16 */ + reg_write(REG_SDRAM_TIMING_HIGH_ADDR, reg); + + /*{0x00001410} - DDR SDRAM Address Control Register */ + reg = 0x000F0000; + + /* tFAW - (24:28) */ +#if (defined(MV88F78X60) || defined(MV88F672X)) + tmp = sum_info.min_four_active_win_delay; + spd_val = ddr3_div(tmp, ddr_clk_time, 0); + stat_val = ddr3_get_static_mc_value(REG_SDRAM_ADDRESS_CTRL_ADDR, + 24, 0x3F, 0, 0); + tmp = ddr3_get_max_val(spd_val, dimm_num, stat_val); + DEBUG_INIT_FULL_C("DDR3 - DUNIT-SET - tFAW = ", tmp, 1); + reg |= ((tmp & 0x3F) << 24); +#else + tmp = sum_info.min_four_active_win_delay - + 4 * (sum_info.min_row_active_to_row_active); + spd_val = ddr3_div(tmp, ddr_clk_time, 0); + stat_val = ddr3_get_static_mc_value(REG_SDRAM_ADDRESS_CTRL_ADDR, + 24, 0x1F, 0, 0); + tmp = ddr3_get_max_val(spd_val, dimm_num, stat_val); + DEBUG_INIT_FULL_C("DDR3 - DUNIT-SET - tFAW-4*tRRD = ", tmp, 1); + reg |= ((tmp & 0x1F) << 24); +#endif + + /* SDRAM device capacity */ +#ifdef DUNIT_STATIC + reg |= (reg_read(REG_SDRAM_ADDRESS_CTRL_ADDR) & 0xF0FFFF); +#endif + +#ifdef DUNIT_SPD + cs_count = 0; + dimm_cnt = 0; + for (cs = 0; cs < MAX_CS; cs++) { + if (cs_ena & (1 << cs) & DIMM_CS_BITMAP) { + if (dimm_info[dimm_cnt].num_of_module_ranks == cs_count) { + dimm_cnt++; + cs_count = 0; + } + cs_count++; + if (dimm_info[dimm_cnt].sdram_capacity < 0x3) { + reg |= ((dimm_info[dimm_cnt].sdram_capacity + 1) << + (REG_SDRAM_ADDRESS_SIZE_OFFS + + (REG_SDRAM_ADDRESS_CTRL_STRUCT_OFFS * cs))); + } else if (dimm_info[dimm_cnt].sdram_capacity > 0x3) { + reg |= ((dimm_info[dimm_cnt].sdram_capacity & 0x3) << + (REG_SDRAM_ADDRESS_SIZE_OFFS + + (REG_SDRAM_ADDRESS_CTRL_STRUCT_OFFS * cs))); + reg |= ((dimm_info[dimm_cnt].sdram_capacity & 0x4) << + (REG_SDRAM_ADDRESS_SIZE_HIGH_OFFS + cs)); + } + } + } + + /* SDRAM device structure */ + cs_count = 0; + dimm_cnt = 0; + for (cs = 0; cs < MAX_CS; cs++) { + if (cs_ena & (1 << cs) & DIMM_CS_BITMAP) { + if (dimm_info[dimm_cnt].num_of_module_ranks == cs_count) { + dimm_cnt++; + cs_count = 0; + } + cs_count++; + if (dimm_info[dimm_cnt].sdram_width == 16) + reg |= (1 << (REG_SDRAM_ADDRESS_CTRL_STRUCT_OFFS * cs)); + } + } +#endif + reg_write(REG_SDRAM_ADDRESS_CTRL_ADDR, reg); + + /*{0x00001418} - DDR SDRAM Operation Register */ + reg = 0xF00; + for (cs = 0; cs < MAX_CS; cs++) { + if (cs_ena & (1 << cs)) + reg &= ~(1 << (cs + REG_SDRAM_OPERATION_CS_OFFS)); + } + reg_write(REG_SDRAM_OPERATION_ADDR, reg); + + /*{0x00001420} - DDR SDRAM Extended Mode Register */ + reg = 0x00000004; + reg_write(REG_SDRAM_EXT_MODE_ADDR, reg); + + /*{0x00001424} - DDR Controller Control (High) Register */ +#if (defined(MV88F78X60) || defined(MV88F672X)) + reg = 0x0000D3FF; +#else + reg = 0x0100D1FF; +#endif + reg_write(REG_DDR_CONT_HIGH_ADDR, reg); + + /*{0x0000142C} - DDR3 Timing Register */ + reg = 0x014C2F38; +#if defined(MV88F78X60) || defined(MV88F672X) + reg = 0x1FEC2F38; +#endif + reg_write(0x142C, reg); + + /*{0x00001484} - MBus CPU Block Register */ +#ifdef MV88F67XX + if (reg_read(REG_DDR_IO_ADDR) & (1 << REG_DDR_IO_CLK_RATIO_OFFS)) + reg_write(REG_MBUS_CPU_BLOCK_ADDR, 0x0000E907); +#endif + + /* + * In case of mixed dimm and on-board devices setup paramters will + * be taken statically + */ + /*{0x00001494} - DDR SDRAM ODT Control (Low) Register */ + reg = odt_config[cs_ena]; + reg_write(REG_SDRAM_ODT_CTRL_LOW_ADDR, reg); + + /*{0x00001498} - DDR SDRAM ODT Control (High) Register */ + reg = 0x00000000; + reg_write(REG_SDRAM_ODT_CTRL_HIGH_ADDR, reg); + + /*{0x0000149C} - DDR Dunit ODT Control Register */ + reg = cs_ena; + reg_write(REG_DUNIT_ODT_CTRL_ADDR, reg); + + /*{0x000014A0} - DDR Dunit ODT Control Register */ +#if defined(MV88F672X) + reg = 0x000006A9; + reg_write(REG_DRAM_FIFO_CTRL_ADDR, reg); +#endif + + /*{0x000014C0} - DRAM address and Control Driving Strenght */ + reg_write(REG_DRAM_ADDR_CTRL_DRIVE_STRENGTH_ADDR, 0x192435e9); + + /*{0x000014C4} - DRAM Data and DQS Driving Strenght */ + reg_write(REG_DRAM_DATA_DQS_DRIVE_STRENGTH_ADDR, 0xB2C35E9); + +#if (defined(MV88F78X60) || defined(MV88F672X)) + /*{0x000014CC} - DRAM Main Pads Calibration Machine Control Register */ + reg = reg_read(REG_DRAM_MAIN_PADS_CAL_ADDR); + reg_write(REG_DRAM_MAIN_PADS_CAL_ADDR, reg | (1 << 0)); +#endif + +#if defined(MV88F672X) + /* DRAM Main Pads Calibration Machine Control Register */ + /* 0x14CC[4:3] - CalUpdateControl = IntOnly */ + reg = reg_read(REG_DRAM_MAIN_PADS_CAL_ADDR); + reg &= 0xFFFFFFE7; + reg |= (1 << 3); + reg_write(REG_DRAM_MAIN_PADS_CAL_ADDR, reg); +#endif + +#ifdef DUNIT_SPD + cs_count = 0; + dimm_cnt = 0; + for (cs = 0; cs < MAX_CS; cs++) { + if ((1 << cs) & DIMM_CS_BITMAP) { + if ((1 << cs) & cs_ena) { + if (dimm_info[dimm_cnt].num_of_module_ranks == + cs_count) { + dimm_cnt++; + cs_count = 0; + } + cs_count++; + reg_write(REG_CS_SIZE_SCRATCH_ADDR + (cs * 0x8), + dimm_info[dimm_cnt].rank_capacity - 1); + } else { + reg_write(REG_CS_SIZE_SCRATCH_ADDR + (cs * 0x8), 0); + } + } + } +#endif + + /*{0x00020184} - Close FastPath - 2G */ + reg_write(REG_FASTPATH_WIN_0_CTRL_ADDR, 0); + + /*{0x00001538} - Read Data Sample Delays Register */ + reg = 0; + for (cs = 0; cs < MAX_CS; cs++) { + if (cs_ena & (1 << cs)) + reg |= (cl << (REG_READ_DATA_SAMPLE_DELAYS_OFFS * cs)); + } + + reg_write(REG_READ_DATA_SAMPLE_DELAYS_ADDR, reg); + DEBUG_INIT_FULL_C("DDR3 - SPD-SET - Read Data Sample Delays = ", reg, + 1); + + /*{0x0000153C} - Read Data Ready Delay Register */ + reg = 0; + for (cs = 0; cs < MAX_CS; cs++) { + if (cs_ena & (1 << cs)) { + reg |= ((cl + 2) << + (REG_READ_DATA_READY_DELAYS_OFFS * cs)); + } + } + reg_write(REG_READ_DATA_READY_DELAYS_ADDR, reg); + DEBUG_INIT_FULL_C("DDR3 - SPD-SET - Read Data Ready Delays = ", reg, 1); + + /* Set MR registers */ + /* MR0 */ + reg = 0x00000600; + tmp = ddr3_cl_to_valid_cl(cl); + reg |= ((tmp & 0x1) << 2); + reg |= ((tmp & 0xE) << 3); /* to bit 4 */ + for (cs = 0; cs < MAX_CS; cs++) { + if (cs_ena & (1 << cs)) { + reg_write(REG_DDR3_MR0_CS_ADDR + + (cs << MR_CS_ADDR_OFFS), reg); + } + } + + /* MR1 */ + reg = 0x00000044 & REG_DDR3_MR1_ODT_MASK; + if (cs_num > 1) + reg = 0x00000046 & REG_DDR3_MR1_ODT_MASK; + + for (cs = 0; cs < MAX_CS; cs++) { + if (cs_ena & (1 << cs)) { + reg |= odt_static[cs_ena][cs]; + reg_write(REG_DDR3_MR1_CS_ADDR + + (cs << MR_CS_ADDR_OFFS), reg); + } + } + + /* MR2 */ + if (reg_read(REG_DDR_IO_ADDR) & (1 << REG_DDR_IO_CLK_RATIO_OFFS)) + tmp = hclk_time / 2; + else + tmp = hclk_time; + + if (tmp >= 2500) + cwl = 5; /* CWL = 5 */ + else if (tmp >= 1875 && tmp < 2500) + cwl = 6; /* CWL = 6 */ + else if (tmp >= 1500 && tmp < 1875) + cwl = 7; /* CWL = 7 */ + else if (tmp >= 1250 && tmp < 1500) + cwl = 8; /* CWL = 8 */ + else if (tmp >= 1070 && tmp < 1250) + cwl = 9; /* CWL = 9 */ + else if (tmp >= 935 && tmp < 1070) + cwl = 10; /* CWL = 10 */ + else if (tmp >= 833 && tmp < 935) + cwl = 11; /* CWL = 11 */ + else if (tmp >= 750 && tmp < 833) + cwl = 12; /* CWL = 12 */ + else { + cwl = 12; /* CWL = 12 */ + printf("Unsupported hclk %d MHz\n", tmp); + } + + reg = ((cwl - 5) << REG_DDR3_MR2_CWL_OFFS); + + for (cs = 0; cs < MAX_CS; cs++) { + if (cs_ena & (1 << cs)) { + reg &= REG_DDR3_MR2_ODT_MASK; + reg |= odt_dynamic[cs_ena][cs]; + reg_write(REG_DDR3_MR2_CS_ADDR + + (cs << MR_CS_ADDR_OFFS), reg); + } + } + + /* MR3 */ + reg = 0x00000000; + for (cs = 0; cs < MAX_CS; cs++) { + if (cs_ena & (1 << cs)) { + reg_write(REG_DDR3_MR3_CS_ADDR + + (cs << MR_CS_ADDR_OFFS), reg); + } + } + + /* {0x00001428} - DDR ODT Timing (Low) Register */ + reg = 0; + reg |= (((cl - cwl + 1) & 0xF) << 4); + reg |= (((cl - cwl + 6) & 0xF) << 8); + reg |= ((((cl - cwl + 6) >> 4) & 0x1) << 21); + reg |= (((cl - 1) & 0xF) << 12); + reg |= (((cl + 6) & 0x1F) << 16); + reg_write(REG_ODT_TIME_LOW_ADDR, reg); + + /* {0x0000147C} - DDR ODT Timing (High) Register */ + reg = 0x00000071; + reg |= ((cwl - 1) << 8); + reg |= ((cwl + 5) << 12); + reg_write(REG_ODT_TIME_HIGH_ADDR, reg); + +#ifdef DUNIT_SPD + /*{0x000015E0} - DDR3 Rank Control Register */ + reg = cs_ena; + cs_count = 0; + dimm_cnt = 0; + for (cs = 0; cs < MAX_CS; cs++) { + if (cs_ena & (1 << cs) & DIMM_CS_BITMAP) { + if (dimm_info[dimm_cnt].num_of_module_ranks == cs_count) { + dimm_cnt++; + cs_count = 0; + } + cs_count++; + + if (dimm_info[dimm_cnt].addr_mirroring && + (cs == 1 || cs == 3) && + (sum_info.type_info != SPD_MODULE_TYPE_RDIMM)) { + reg |= (1 << (REG_DDR3_RANK_CTRL_MIRROR_OFFS + cs)); + DEBUG_INIT_FULL_C("DDR3 - SPD-SET - Setting Address Mirroring for CS = ", + cs, 1); + } + } + } + reg_write(REG_DDR3_RANK_CTRL_ADDR, reg); +#endif + + /*{0xD00015E4} - ZQDS Configuration Register */ + reg = 0x00203c18; + reg_write(REG_ZQC_CONF_ADDR, reg); + + /* {0x00015EC} - DDR PHY */ +#if defined(MV88F78X60) + reg = 0xF800AAA5; + if (mv_ctrl_rev_get() == MV_78XX0_B0_REV) + reg = 0xF800A225; +#else + reg = 0xDE000025; +#if defined(MV88F672X) + reg = 0xF800A225; +#endif +#endif + reg_write(REG_DRAM_PHY_CONFIG_ADDR, reg); + +#if (defined(MV88F78X60) || defined(MV88F672X)) + /* Registered DIMM support - supported only in AXP A0 devices */ + /* Currently supported for SPD detection only */ + /* + * Flow is according to the Registered DIMM chapter in the + * Functional Spec + */ + if (sum_info.type_info == SPD_MODULE_TYPE_RDIMM) { + DEBUG_INIT_S("DDR3 Training Sequence - Registered DIMM detected\n"); + + /* Set commands parity completion */ + reg = reg_read(REG_REGISTERED_DRAM_CTRL_ADDR); + reg &= ~REG_REGISTERED_DRAM_CTRL_PARITY_MASK; + reg |= 0x8; + reg_write(REG_REGISTERED_DRAM_CTRL_ADDR, reg); + + /* De-assert M_RESETn and assert M_CKE */ + reg_write(REG_SDRAM_INIT_CTRL_ADDR, + 1 << REG_SDRAM_INIT_CKE_ASSERT_OFFS); + do { + reg = (reg_read(REG_SDRAM_INIT_CTRL_ADDR)) & + (1 << REG_SDRAM_INIT_CKE_ASSERT_OFFS); + } while (reg); + + for (rc = 0; rc < SPD_RDIMM_RC_NUM; rc++) { + if (rc != 6 && rc != 7) { + /* Set CWA Command */ + reg = (REG_SDRAM_OPERATION_CMD_CWA & + ~(0xF << REG_SDRAM_OPERATION_CS_OFFS)); + reg |= ((dimm_info[0].dimm_rc[rc] & + REG_SDRAM_OPERATION_CWA_DATA_MASK) << + REG_SDRAM_OPERATION_CWA_DATA_OFFS); + reg |= rc << REG_SDRAM_OPERATION_CWA_RC_OFFS; + /* Configure - Set Delay - tSTAB/tMRD */ + if (rc == 2 || rc == 10) + reg |= (0x1 << REG_SDRAM_OPERATION_CWA_DELAY_SEL_OFFS); + /* 0x1418 - SDRAM Operation Register */ + reg_write(REG_SDRAM_OPERATION_ADDR, reg); + + /* + * Poll the "cmd" field in the SDRAM OP + * register for 0x0 + */ + do { + reg = reg_read(REG_SDRAM_OPERATION_ADDR) & + (REG_SDRAM_OPERATION_CMD_MASK); + } while (reg); + } + } + } +#endif + + return MV_OK; +} + +/* + * Name: ddr3_div - this function divides integers + * Desc: + * Args: val - the value + * divider - the divider + * sub - substruction value + * Notes: + * Returns: required value + */ +u32 ddr3_div(u32 val, u32 divider, u32 sub) +{ + return val / divider + (val % divider > 0 ? 1 : 0) - sub; +} + +/* + * Name: ddr3_get_max_val + * Desc: + * Args: + * Notes: + * Returns: + */ +u32 ddr3_get_max_val(u32 spd_val, u32 dimm_num, u32 static_val) +{ +#ifdef DUNIT_STATIC + if (dimm_num > 0) { + if (spd_val >= static_val) + return spd_val; + else + return static_val; + } else { + return static_val; + } +#else + return spd_val; +#endif +} + +/* + * Name: ddr3_get_min_val + * Desc: + * Args: + * Notes: + * Returns: + */ +u32 ddr3_get_min_val(u32 spd_val, u32 dimm_num, u32 static_val) +{ +#ifdef DUNIT_STATIC + if (dimm_num > 0) { + if (spd_val <= static_val) + return spd_val; + else + return static_val; + } else + return static_val; +#else + return spd_val; +#endif +} +#endif |
