diff options
Diffstat (limited to 'drivers/ddr/fsl/main.c')
| -rw-r--r-- | drivers/ddr/fsl/main.c | 31 |
1 files changed, 30 insertions, 1 deletions
diff --git a/drivers/ddr/fsl/main.c b/drivers/ddr/fsl/main.c index d62ca63c77..5e001fcb99 100644 --- a/drivers/ddr/fsl/main.c +++ b/drivers/ddr/fsl/main.c @@ -1,5 +1,5 @@ /* - * Copyright 2008-2012 Freescale Semiconductor, Inc. + * Copyright 2008-2014 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -81,14 +81,37 @@ u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = { #endif +#define SPD_SPA0_ADDRESS 0x36 +#define SPD_SPA1_ADDRESS 0x37 + static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address) { int ret; +#ifdef CONFIG_SYS_FSL_DDR4 + uint8_t dummy = 0; +#endif i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM); +#ifdef CONFIG_SYS_FSL_DDR4 + /* + * DDR4 SPD has 384 to 512 bytes + * To access the lower 256 bytes, we need to set EE page address to 0 + * To access the upper 256 bytes, we need to set EE page address to 1 + * See Jedec standar No. 21-C for detail + */ + i2c_write(SPD_SPA0_ADDRESS, 0, 1, &dummy, 1); + ret = i2c_read(i2c_address, 0, 1, (uchar *)spd, 256); + if (!ret) { + i2c_write(SPD_SPA1_ADDRESS, 0, 1, &dummy, 1); + ret = i2c_read(i2c_address, 0, 1, + (uchar *)((ulong)spd + 256), + min(256, sizeof(generic_spd_eeprom_t) - 256)); + } +#else ret = i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(generic_spd_eeprom_t)); +#endif if (ret) { if (i2c_address == @@ -197,6 +220,11 @@ const char * step_to_string(unsigned int step) { if ((1 << s) != step) return step_string_tbl[7]; + if (s >= ARRAY_SIZE(step_string_tbl)) { + printf("Error for the step in %s\n", __func__); + s = 0; + } + return step_string_tbl[s]; } @@ -497,6 +525,7 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, /* STEP 5: Assign addresses to chip selects */ check_interleaving_options(pinfo); total_mem = step_assign_addresses(pinfo, dbw_capacity_adjust); + debug("Total mem %llu assigned\n", total_mem); case STEP_COMPUTE_REGS: /* STEP 6: compute controller register values */ |
