diff options
Diffstat (limited to 'drivers/block/sil680.c')
| -rw-r--r-- | drivers/block/sil680.c | 110 |
1 files changed, 110 insertions, 0 deletions
diff --git a/drivers/block/sil680.c b/drivers/block/sil680.c new file mode 100644 index 0000000000..a6143df4c0 --- /dev/null +++ b/drivers/block/sil680.c @@ -0,0 +1,110 @@ +/* + * (C) Copyright 2007 + * Gary Jennejohn, DENX Software Engineering, garyj@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ +/* sil680.c - ide support functions for the Sil0680A controller */ + +/* + * The following parameters must be defined in the configuration file + * of the target board: + * + * #define CFG_IDE_SIL680 + * + * #define CONFIG_PCI_PNP + * NOTE it may also be necessary to define this if the default of 8 is + * incorrect for the target board (e.g. the sequoia board requires 0). + * #define CFG_PCI_CACHE_LINE_SIZE 0 + * + * #define CONFIG_CMD_IDE + * #undef CONFIG_IDE_8xx_DIRECT + * #undef CONFIG_IDE_LED + * #undef CONFIG_IDE_RESET + * #define CONFIG_IDE_PREINIT + * #define CFG_IDE_MAXBUS 2 - modify to suit + * #define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) - modify to suit + * #define CFG_ATA_BASE_ADDR 0 + * #define CFG_ATA_IDE0_OFFSET 0 + * #define CFG_ATA_IDE1_OFFSET 0 + * #define CFG_ATA_DATA_OFFSET 0 + * #define CFG_ATA_REG_OFFSET 0 + * #define CFG_ATA_ALT_OFFSET 0x0004 + * + * The mapping for PCI IO-space. + * NOTE this is the value for the sequoia board. Modify to suit. + * #define CFG_PCI0_IO_SPACE 0xE8000000 + */ + +#include <common.h> +#if defined(CFG_IDE_SIL680) +#include <ata.h> +#include <ide.h> +#include <pci.h> + +extern ulong ide_bus_offset[CFG_IDE_MAXBUS]; + +int ide_preinit (void) +{ + int status; + pci_dev_t devbusfn; + int l; + + status = 1; + for (l = 0; l < CFG_IDE_MAXBUS; l++) { + ide_bus_offset[l] = -ATA_STATUS; + } + devbusfn = pci_find_device (0x1095, 0x0680, 0); + if (devbusfn != -1) { + status = 0; + + pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0, + (u32 *) &ide_bus_offset[0]); + ide_bus_offset[0] &= 0xfffffff8; + ide_bus_offset[0] += CFG_PCI0_IO_SPACE; + pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_2, + (u32 *) &ide_bus_offset[1]); + ide_bus_offset[1] &= 0xfffffff8; + ide_bus_offset[1] += CFG_PCI0_IO_SPACE; + /* init various things - taken from the Linux driver */ + /* set PIO mode */ + pci_write_config_byte(devbusfn, 0x80, 0x00); + pci_write_config_byte(devbusfn, 0x84, 0x00); + /* IDE0 */ + pci_write_config_byte(devbusfn, 0xA1, 0x02); + pci_write_config_word(devbusfn, 0xA2, 0x328A); + pci_write_config_dword(devbusfn, 0xA4, 0x62DD62DD); + pci_write_config_dword(devbusfn, 0xA8, 0x43924392); + pci_write_config_dword(devbusfn, 0xAC, 0x40094009); + /* IDE1 */ + pci_write_config_byte(devbusfn, 0xB1, 0x02); + pci_write_config_word(devbusfn, 0xB2, 0x328A); + pci_write_config_dword(devbusfn, 0xB4, 0x62DD62DD); + pci_write_config_dword(devbusfn, 0xB8, 0x43924392); + pci_write_config_dword(devbusfn, 0xBC, 0x40094009); + } + return (status); +} + +void ide_set_reset (int flag) { + return; +} + +#endif /* CFG_IDE_SIL680 */ |
