diff options
Diffstat (limited to 'cpu')
| -rw-r--r-- | cpu/74xx_7xx/traps.c | 234 | ||||
| -rw-r--r-- | cpu/mpc824x/drivers/epic/epic1.c | 513 | ||||
| -rw-r--r-- | cpu/mpc824x/traps.c | 205 | ||||
| -rw-r--r-- | cpu/mpc8260/ether_fcc.c | 347 | ||||
| -rw-r--r-- | cpu/mpc8260/traps.c | 246 | ||||
| -rw-r--r-- | cpu/mpc8xx/traps.c | 245 | ||||
| -rw-r--r-- | cpu/mpc8xx/upatch.c | 102 | ||||
| -rw-r--r-- | cpu/ppc4xx/miiphy.c | 182 | ||||
| -rw-r--r-- | cpu/ppc4xx/traps.c | 291 |
9 files changed, 2365 insertions, 0 deletions
diff --git a/cpu/74xx_7xx/traps.c b/cpu/74xx_7xx/traps.c new file mode 100644 index 0000000000..26db097402 --- /dev/null +++ b/cpu/74xx_7xx/traps.c @@ -0,0 +1,234 @@ +/* + * linux/arch/ppc/kernel/traps.c + * + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Modified by Cort Dougan (cort@cs.nmt.edu) + * and Paul Mackerras (paulus@cs.anu.edu.au) + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * This file handles the architecture-dependent parts of hardware exceptions + */ + +#include <common.h> +#include <command.h> +#include <asm/processor.h> + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +int (*debugger_exception_handler)(struct pt_regs *) = 0; +#endif + +/* Returns 0 if exception not found and fixup otherwise. */ +extern unsigned long search_exception_table(unsigned long); + +/* THIS NEEDS CHANGING to use the board info structure. +*/ +#define END_OF_MEM 0x02000000 + +/* + * Trap & Exception support + */ + +void +print_backtrace(unsigned long *sp) +{ + int cnt = 0; + unsigned long i; + + printf("Call backtrace: "); + while (sp) { + if ((uint)sp > END_OF_MEM) + break; + + i = sp[1]; + if (cnt++ % 7 == 0) + printf("\n"); + printf("%08lX ", i); + if (cnt > 32) break; + sp = (unsigned long *)*sp; + } + printf("\n"); +} + +void +show_regs(struct pt_regs * regs) +{ + int i; + + printf("NIP: %08lX XER: %08lX LR: %08lX REGS:" + " %p TRAP: %04lx DAR: %08lX\n", + regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar); + printf("MSR: %08lx EE: %01x PR: %01x FP:" + " %01x ME: %01x IR/DR: %01x%01x\n", + regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0, + regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0, + regs->msr&MSR_IR ? 1 : 0, + regs->msr&MSR_DR ? 1 : 0); + + printf("\n"); + for (i = 0; i < 32; i++) { + if ((i % 8) == 0) + { + printf("GPR%02d: ", i); + } + + printf("%08lX ", regs->gpr[i]); + if ((i % 8) == 7) + { + printf("\n"); + } + } +} + + +void +_exception(int signr, struct pt_regs *regs) +{ + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("Exception in kernel pc %lx signal %d",regs->nip,signr); +} + +void +MachineCheckException(struct pt_regs *regs) +{ + unsigned long fixup; + + /* Probing PCI using config cycles cause this exception + * when a device is not present. Catch it and return to + * the PCI exception handler. + */ + if ((fixup = search_exception_table(regs->nip)) != 0) { + regs->nip = fixup; + return; + } + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) + return; +#endif + + printf("Machine check in kernel mode.\n"); + printf("Caused by (from msr): "); + printf("regs %p ",regs); + switch( regs->msr & 0x0000F000) + { + case (1<<12) : + printf("Machine check signal - probably due to mm fault\n" + "with mmu off\n"); + break; + case (1<<13) : + printf("Transfer error ack signal\n"); + break; + case (1<<14) : + printf("Data parity signal\n"); + break; + case (1<<15) : + printf("Address parity signal\n"); + break; + default: + printf("Unknown values in msr\n"); + } + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("machine check"); +} + +void +AlignmentException(struct pt_regs *regs) +{ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) + return; +#endif + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("Alignment Exception"); +} + +void +ProgramCheckException(struct pt_regs *regs) +{ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) + return; +#endif + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("Program Check Exception"); +} + +void +SoftEmuException(struct pt_regs *regs) +{ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) + return; +#endif + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("Software Emulation Exception"); +} + + +void +UnknownException(struct pt_regs *regs) +{ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) + return; +#endif + printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", + regs->nip, regs->msr, regs->trap); + _exception(0, regs); +} + +/* Probe an address by reading. If not present, return -1, otherwise + * return 0. + */ +int +addr_probe(uint *addr) +{ +#if 0 + int retval; + + __asm__ __volatile__( \ + "1: lwz %0,0(%1)\n" \ + " eieio\n" \ + " li %0,0\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %0,-1\n" \ + " b 2b\n" \ + ".section __ex_table,\"a\"\n" \ + " .align 2\n" \ + " .long 1b,3b\n" \ + ".text" \ + : "=r" (retval) : "r"(addr)); + + return (retval); +#endif + return 0; +} diff --git a/cpu/mpc824x/drivers/epic/epic1.c b/cpu/mpc824x/drivers/epic/epic1.c new file mode 100644 index 0000000000..362e12970d --- /dev/null +++ b/cpu/mpc824x/drivers/epic/epic1.c @@ -0,0 +1,513 @@ +/************************************************** + * + * copyright @ motorola, 1999 + * + *************************************************/ +#include <mpc824x.h> +#include <common.h> +#include "epic.h" + + +#define PRINT(format, args...) printf(format , ## args) + +typedef void (*VOIDFUNCPTR) (void); /* ptr to function returning void */ +struct SrcVecTable SrcVecTable[MAXVEC] = /* Addr/Vector cross-reference tbl */ + { + { EPIC_EX_INT0_VEC_REG, "External Direct/Serial Source 0"}, + { EPIC_EX_INT1_VEC_REG, "External Direct/Serial Source 1"}, + { EPIC_EX_INT2_VEC_REG, "External Direct/Serial Source 2"}, + { EPIC_EX_INT3_VEC_REG, "External Direct/Serial Source 3"}, + { EPIC_EX_INT4_VEC_REG, "External Direct/Serial Source 4"}, + + { EPIC_SR_INT5_VEC_REG, "External Serial Source 5"}, + { EPIC_SR_INT6_VEC_REG, "External Serial Source 6"}, + { EPIC_SR_INT7_VEC_REG, "External Serial Source 7"}, + { EPIC_SR_INT8_VEC_REG, "External Serial Source 8"}, + { EPIC_SR_INT9_VEC_REG, "External Serial Source 9"}, + { EPIC_SR_INT10_VEC_REG, "External Serial Source 10"}, + { EPIC_SR_INT11_VEC_REG, "External Serial Source 11"}, + { EPIC_SR_INT12_VEC_REG, "External Serial Source 12"}, + { EPIC_SR_INT13_VEC_REG, "External Serial Source 13"}, + { EPIC_SR_INT14_VEC_REG, "External Serial Source 14"}, + { EPIC_SR_INT15_VEC_REG, "External Serial Source 15"}, + + { EPIC_I2C_INT_VEC_REG, "Internal I2C Source"}, + { EPIC_DMA0_INT_VEC_REG, "Internal DMA0 Source"}, + { EPIC_DMA1_INT_VEC_REG, "Internal DMA1 Source"}, + { EPIC_MSG_INT_VEC_REG, "Internal Message Source"}, + }; + +VOIDFUNCPTR intVecTbl[MAXVEC]; /* Interrupt vector table */ + + +/**************************************************************************** +* epicInit - Initialize the EPIC registers +* +* This routine resets the Global Configuration Register, thus it: +* - Disables all interrupts +* - Sets epic registers to reset values +* - Sets the value of the Processor Current Task Priority to the +* highest priority (0xF). +* epicInit then sets the EPIC operation mode to Mixed Mode (vs. Pass +* Through or 8259 compatible mode). +* +* If IRQType (input) is Direct IRQs: +* - IRQType is written to the SIE bit of the EPIC Interrupt +* Configuration register (ICR). +* - clkRatio is ignored. +* If IRQType is Serial IRQs: +* - both IRQType and clkRatio will be written to the ICR register +*/ + +void epicInit + ( + unsigned int IRQType, /* Direct or Serial */ + unsigned int clkRatio /* Clk Ratio for Serial IRQs */ + ) + { + ULONG tmp; + + tmp = sysEUMBBARRead(EPIC_GLOBAL_REG); + tmp |= 0xa0000000; /* Set the Global Conf. register */ + sysEUMBBARWrite(EPIC_GLOBAL_REG, tmp); + sysEUMBBARWrite(EPIC_GLOBAL_REG, 0x20000000); + tmp = sysEUMBBARRead(EPIC_INT_CONF_REG); /* Read interrupt conf. reg */ + + if (IRQType == EPIC_DIRECT_IRQ) /* direct mode */ + sysEUMBBARWrite(EPIC_INT_CONF_REG, tmp & 0xf7ffffff); + else /* Serial mode */ + { + tmp = (clkRatio << 28) | 0x08000000; /* Set clock ratio */ + sysEUMBBARWrite(EPIC_INT_CONF_REG, tmp); + } + + while (epicIntAck() != 0xff); /* Clear all pending interrupts */ +} + +/**************************************************************************** + * epicIntEnable - Enable an interrupt source + * + * This routine clears the mask bit of an external, an internal or + * a Timer register to enable the interrupt. + * + * RETURNS: None + */ +void epicIntEnable + ( + int intVec /* Interrupt Vector Number */ + ) + { + ULONG tmp; + ULONG srAddr; + + srAddr = SrcVecTable[intVec].srcAddr; /* Retrieve src Vec/Prio register */ + tmp = sysEUMBBARRead(srAddr); + tmp &= 0x7fffffff; /* Clear the mask bit */ + sysEUMBBARWrite(srAddr, tmp); + return; + } + +/**************************************************************************** + * epicIntDisable - Disable an interrupt source + * + * This routine sets the mask bit of an external, an internal or + * a Timer register to disable the interrupt. + * + * RETURNS: OK or ERROR + * + */ + +void epicIntDisable + ( + int intVec /* Interrupt vector number */ + ) + { + + ULONG tmp, srAddr; + + srAddr = SrcVecTable[intVec].srcAddr; + tmp = sysEUMBBARRead(srAddr); + tmp |= 0x80000000; /* Set the mask bit */ + sysEUMBBARWrite(srAddr, tmp); + return; + } + +/**************************************************************************** + * epicIntSourceConfig - Set properties of an interrupt source + * + * This function sets interrupt properites (Polarity, Sense, Interrupt + * Prority, and Interrupt Vector) of an Interrupt Source. The properties + * can be set when the current source is not in-request or in-service, + * which is determined by the Activity bit. This routine return ERROR + * if the the Activity bit is 1 (in-request or in-service). + * + * This function assumes that the Source Vector/Priority register (input) + * is a valid address. + * + * RETURNS: OK or ERROR + */ + +int epicIntSourceConfig + ( + int Vect, /* interrupt source vector number */ + int Polarity, /* interrupt source polarity */ + int Sense, /* interrupt source Sense */ + int Prio /* interrupt source priority */ + ) + + { + ULONG tmp, newVal; + ULONG actBit, srAddr; + + srAddr = SrcVecTable[Vect].srcAddr; + tmp = sysEUMBBARRead(srAddr); + actBit = (tmp & 40000000) >> 30; /* retrieve activity bit - bit 30 */ + if (actBit == 1) + return ERROR; + + tmp &= 0xff30ff00; /* Erase previously set P,S,Prio,Vector bits */ + newVal = (Polarity << 23) | (Sense << 22) | (Prio << 16) | Vect; + sysEUMBBARWrite(srAddr, tmp | newVal ); + return (OK); + } + +/**************************************************************************** + * epicIntAck - acknowledge an interrupt + * + * This function reads the Interrupt acknowldge register and return + * the vector number of the highest pending interrupt. + * + * RETURNS: Interrupt Vector number. + */ + +unsigned int epicIntAck(void) +{ + return(sysEUMBBARRead( EPIC_PROC_INT_ACK_REG )); +} + +/**************************************************************************** + * epicEOI - signal an end of interrupt + * + * This function writes 0x0 to the EOI register to signal end of interrupt. + * It is usually called after an interrupt routine is served. + * + * RETURNS: None + */ + +void epicEOI(void) + { + sysEUMBBARWrite(EPIC_PROC_EOI_REG, 0x0); + } + +/**************************************************************************** + * epicCurTaskPrioSet - sets the priority of the Processor Current Task + * + * This function should be called after epicInit() to lower the priority + * of the processor current task. + * + * RETURNS: OK or ERROR + */ + +int epicCurTaskPrioSet + ( + int prioNum /* New priority value */ + ) + { + + if ( (prioNum < 0) || (prioNum > 0xF)) + return ERROR; + sysEUMBBARWrite(EPIC_PROC_CTASK_PRI_REG, prioNum); + return OK; + } + + +/************************************************************************ + * function: epicIntTaskGet + * + * description: Get value of processor current interrupt task priority register + * + * note: + ***********************************************************************/ +unsigned char epicIntTaskGet() +{ + /* get the interrupt task priority register */ + ULONG reg; + unsigned char rec; + + reg = sysEUMBBARRead( EPIC_PROC_CTASK_PRI_REG ); + rec = ( reg & 0x0F ); + return rec; +} + + +/************************************************************** + * function: epicISR + * + * description: EPIC service routine called by the core exception + * at 0x500 + * + * note: + **************************************************************/ +unsigned int epicISR(void) +{ + return 0; +} + + +/************************************************************ + * function: epicModeGet + * + * description: query EPIC mode, return 0 if pass through mode + * return 1 if mixed mode + * + * note: + *************************************************************/ +unsigned int epicModeGet(void) +{ + ULONG val; + + val = sysEUMBBARRead( EPIC_GLOBAL_REG ); + return (( val & 0x20000000 ) >> 29); +} + + +/********************************************* + * function: epicConfigGet + * + * description: Get the EPIC interrupt Configuration + * return 0 if not error, otherwise return 1 + * + * note: + ********************************************/ +void epicConfigGet( unsigned int *clkRatio, unsigned int *serEnable) +{ + ULONG val; + + val = sysEUMBBARRead( EPIC_INT_CONF_REG ); + *clkRatio = ( val & 0x70000000 ) >> 28; + *serEnable = ( val & 0x8000000 ) >> 27; +} + + +/******************************************************************* + * sysEUMBBARRead - Read a 32-bit EUMBBAR register + * + * This routine reads the content of a register in the Embedded + * Utilities Memory Block, and swaps to big endian before returning + * the value. + * + * RETURNS: The content of the specified EUMBBAR register. + */ + +ULONG sysEUMBBARRead + ( + ULONG regNum + ) + { + ULONG temp; + + temp = *(ULONG *) (CFG_EUMB_ADDR + regNum); + return ( LONGSWAP(temp)); + } + +/******************************************************************* + * sysEUMBBARWrite - Write a 32-bit EUMBBAR register + * + * This routine swaps the value to little endian then writes it to + * a register in the Embedded Utilities Memory Block address space. + * + * RETURNS: N/A + */ + +void sysEUMBBARWrite + ( + ULONG regNum, /* EUMBBAR register address */ + ULONG regVal /* Value to be written */ + ) + { + + *(ULONG *) (CFG_EUMB_ADDR + regNum) = LONGSWAP(regVal); + return ; + } + + +/******************************************************** + * function: epicVendorId + * + * description: return the EPIC Vendor Identification + * register: + * + * siliccon version, device id, and vendor id + * + * note: + ********************************************************/ +void epicVendorId + ( + unsigned int *step, + unsigned int *devId, + unsigned int *venId + ) + { + ULONG val; + val = sysEUMBBARRead( EPIC_VENDOR_ID_REG ); + *step = ( val & 0x00FF0000 ) >> 16; + *devId = ( val & 0x0000FF00 ) >> 8; + *venId = ( val & 0x000000FF ); + } + +/************************************************** + * function: epicFeatures + * + * description: return the number of IRQ supported, + * number of CPU, and the version of the + * OpenEPIC + * + * note: + *************************************************/ +void epicFeatures + ( + unsigned int *noIRQs, + unsigned int *noCPUs, + unsigned int *verId + ) + { + ULONG val; + + val = sysEUMBBARRead( EPIC_FEATURES_REG ); + *noIRQs = ( val & 0x07FF0000 ) >> 16; + *noCPUs = ( val & 0x00001F00 ) >> 8; + *verId = ( val & 0x000000FF ); +} + + +/********************************************************* + * function: epciTmFrequncySet + * + * description: Set the timer frequency reporting register + ********************************************************/ +void epicTmFrequencySet( unsigned int frq ) +{ + sysEUMBBARWrite(EPIC_TM_FREQ_REG, frq); +} + +/******************************************************* + * function: epicTmFrequncyGet + * + * description: Get the current value of the Timer Frequency + * Reporting register + * + ******************************************************/ +unsigned int epicTmFrequencyGet(void) +{ + return( sysEUMBBARRead(EPIC_TM_FREQ_REG)) ; +} + + +/**************************************************** + * function: epicTmBaseSet + * + * description: Set the #n global timer base count register + * return 0 if no error, otherwise return 1. + * + * note: + ****************************************************/ +unsigned int epicTmBaseSet + ( + ULONG srcAddr, /* Address of the Timer Base register */ + unsigned int cnt, /* Base count */ + unsigned int inhibit /* 1 - count inhibit */ + ) +{ + + unsigned int val = 0x80000000; + /* First inhibit counting the timer */ + sysEUMBBARWrite(srcAddr, val) ; + + /* set the new value */ + val = (cnt & 0x7fffffff) | ((inhibit & 0x1) << 31); + sysEUMBBARWrite(srcAddr, val) ; + return 0; +} + +/*********************************************************************** + * function: epicTmBaseGet + * + * description: Get the current value of the global timer base count register + * return 0 if no error, otherwise return 1. + * + * note: + ***********************************************************************/ +unsigned int epicTmBaseGet( ULONG srcAddr, unsigned int *val ) +{ + *val = sysEUMBBARRead( srcAddr ); + *val = *val & 0x7fffffff; + return 0; +} + +/*********************************************************** + * function: epicTmCountGet + * + * description: Get the value of a given global timer + * current count register + * return 0 if no error, otherwise return 1 + * note: + **********************************************************/ +unsigned int epicTmCountGet( ULONG srcAddr, unsigned int *val ) +{ + *val = sysEUMBBARRead( srcAddr ); + *val = *val & 0x7fffffff; + return 0; +} + + + +/*********************************************************** + * function: epicTmInhibit + * + * description: Stop counting of a given global timer + * return 0 if no error, otherwise return 1 + * + * note: + ***********************************************************/ +unsigned int epicTmInhibit( unsigned int srcAddr ) +{ + ULONG val; + + val = sysEUMBBARRead( srcAddr ); + val |= 0x80000000; + sysEUMBBARWrite( srcAddr, val ); + return 0; +} + +/****************************************************************** + * function: epicTmEnable + * + * description: Enable counting of a given global timer + * return 0 if no error, otherwise return 1 + * + * note: + *****************************************************************/ +unsigned int epicTmEnable( ULONG srcAddr ) +{ + ULONG val; + + val = sysEUMBBARRead( srcAddr ); + val &= 0x7fffffff; + sysEUMBBARWrite( srcAddr, val ); + return 0; +} + +void epicSourcePrint(int Vect) + { + ULONG srcVal; + + srcVal = sysEUMBBARRead(SrcVecTable[Vect].srcAddr); + PRINT("%s\n", SrcVecTable[Vect].srcName); + PRINT("Address = 0x%lx\n", SrcVecTable[Vect].srcAddr); + PRINT("Vector = %ld\n", (srcVal & 0x000000FF) ); + PRINT("Mask = %ld\n", srcVal >> 31); + PRINT("Activitiy = %ld\n", (srcVal & 40000000) >> 30); + PRINT("Polarity = %ld\n", (srcVal & 0x00800000) >> 23); + PRINT("Sense = %ld\n", (srcVal & 0x00400000) >> 22); + PRINT("Priority = %ld\n", (srcVal & 0x000F0000) >> 16); + } diff --git a/cpu/mpc824x/traps.c b/cpu/mpc824x/traps.c new file mode 100644 index 0000000000..11f51c2501 --- /dev/null +++ b/cpu/mpc824x/traps.c @@ -0,0 +1,205 @@ +/* + * linux/arch/ppc/kernel/traps.c + * + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Modified by Cort Dougan (cort@cs.nmt.edu) + * and Paul Mackerras (paulus@cs.anu.edu.au) + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * This file handles the architecture-dependent parts of hardware exceptions + */ + +#include <common.h> +#include <asm/processor.h> + +/* Returns 0 if exception not found and fixup otherwise. */ +extern unsigned long search_exception_table(unsigned long); + +/* THIS NEEDS CHANGING to use the board info structure. +*/ +#define END_OF_MEM 0x00400000 + +/* + * Trap & Exception support + */ + +void +print_backtrace(unsigned long *sp) +{ + int cnt = 0; + unsigned long i; + + printf("Call backtrace: "); + while (sp) { + if ((uint)sp > END_OF_MEM) + break; + + i = sp[1]; + if (cnt++ % 7 == 0) + printf("\n"); + printf("%08lX ", i); + if (cnt > 32) break; + sp = (unsigned long *)*sp; + } + printf("\n"); +} + +void show_regs(struct pt_regs * regs) +{ + int i; + + printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n", + regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar); + printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n", + regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0, + regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0, + regs->msr&MSR_IR ? 1 : 0, + regs->msr&MSR_DR ? 1 : 0); + + printf("\n"); + for (i = 0; i < 32; i++) { + if ((i % 8) == 0) + { + printf("GPR%02d: ", i); + } + + printf("%08lX ", regs->gpr[i]); + if ((i % 8) == 7) + { + printf("\n"); + } + } +} + + +void +_exception(int signr, struct pt_regs *regs) +{ + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("Exception in kernel pc %lx signal %d",regs->nip,signr); +} + +void +MachineCheckException(struct pt_regs *regs) +{ + unsigned long fixup; + + /* Probing PCI using config cycles cause this exception + * when a device is not present. Catch it and return to + * the PCI exception handler. + */ + if ((fixup = search_exception_table(regs->nip)) != 0) { + regs->nip = fixup; + return; + } + + printf("Machine check in kernel mode.\n"); + printf("Caused by (from msr): "); + printf("regs %p ",regs); + switch( regs->msr & 0x0000F000) + { + case (1<<12) : + printf("Machine check signal - probably due to mm fault\n" + "with mmu off\n"); + break; + case (1<<13) : + printf("Transfer error ack signal\n"); + break; + case (1<<14) : + printf("Data parity signal\n"); + break; + case (1<<15) : + printf("Address parity signal\n"); + break; + default: + printf("Unknown values in msr\n"); + } + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("machine check"); +} + +void +AlignmentException(struct pt_regs *regs) +{ + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("Alignment Exception"); +} + +void +ProgramCheckException(struct pt_regs *regs) +{ + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("Program Check Exception"); +} + +void +SoftEmuException(struct pt_regs *regs) +{ + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("Software Emulation Exception"); +} + + +void +UnknownException(struct pt_regs *regs) +{ + printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", + regs->nip, regs->msr, regs->trap); + _exception(0, regs); +} + +/* Probe an address by reading. If not present, return -1, otherwise + * return 0. + */ +int +addr_probe(uint *addr) +{ +#if 0 + int retval; + + __asm__ __volatile__( \ + "1: lwz %0,0(%1)\n" \ + " eieio\n" \ + " li %0,0\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %0,-1\n" \ + " b 2b\n" \ + ".section __ex_table,\"a\"\n" \ + " .align 2\n" \ + " .long 1b,3b\n" \ + ".text" \ + : "=r" (retval) : "r"(addr)); + + return (retval); +#endif + return 0; +} diff --git a/cpu/mpc8260/ether_fcc.c b/cpu/mpc8260/ether_fcc.c new file mode 100644 index 0000000000..01ddf5ccba --- /dev/null +++ b/cpu/mpc8260/ether_fcc.c @@ -0,0 +1,347 @@ +/* + * MPC8260 FCC Fast Ethernet + * + * Copyright (c) 2000 MontaVista Software, Inc. Dan Malek (dmalek@jlc.net) + * + * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * MPC8260 FCC Fast Ethernet + * Basic ET HW initialization and packet RX/TX routines + * + * This code will not perform the IO port configuration. This should be + * done in the iop_conf_t structure specific for the board. + * + * TODO: + * add a PHY driver to do the negotiation + * reflect negotiation results in FPSMR + * look for ways to configure the board specific stuff elsewhere, eg. + * config_xxx.h or the board directory + */ + +#include <common.h> +#include <asm/cpm_8260.h> +#include <mpc8260.h> +#include <net.h> +#include <command.h> +#include <config.h> + +#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_COMMANDS & CFG_CMD_NET) + +/*---------------------------------------------------------------------*/ +#if (CONFIG_ETHER_INDEX == 1) + +#define PROFF_ENET PROFF_FCC1 +#define CPM_CR_ENET_SBLOCK CPM_CR_FCC1_SBLOCK +#define CPM_CR_ENET_SBLOCK CPM_CR_FCC1_SBLOCK +#define CPM_CR_ENET_PAGE CPM_CR_FCC1_PAGE + +/*---------------------------------------------------------------------*/ +#elif (CONFIG_ETHER_INDEX == 2) + +#define PROFF_ENET PROFF_FCC2 +#define CPM_CR_ENET_SBLOCK CPM_CR_FCC2_SBLOCK +#define CPM_CR_ENET_PAGE CPM_CR_FCC2_PAGE + +/*---------------------------------------------------------------------*/ +#elif (CONFIG_ETHER_INDEX == 3) + +#define PROFF_ENET PROFF_FCC3 +#define CPM_CR_ENET_SBLOCK CPM_CR_FCC3_SBLOCK +#define CPM_CR_ENET_PAGE CPM_CR_FCC3_PAGE + +/*---------------------------------------------------------------------*/ +#else +#error "FCC Ethernet not correctly defined" +#endif +/*---------------------------------------------------------------------*/ + +/* Maximum input DMA size. Must be a should(?) be a multiple of 4. */ +#define PKT_MAXDMA_SIZE 1520 + +/* The FCC stores dest/src/type, data, and checksum for receive packets. */ +#define PKT_MAXBUF_SIZE 1518 +#define PKT_MINBUF_SIZE 64 + +/* Maximum input buffer size. Must be a multiple of 32. */ +#define PKT_MAXBLR_SIZE 1536 + +#define TOUT_LOOP 1000000 + +#define TX_BUF_CNT 2 +#ifdef __GNUC__ +static char txbuf[TX_BUF_CNT][PKT_MAXBLR_SIZE] __attribute__ ((aligned(8))); +#else +#error "txbuf must be 64-bit aligned" +#endif + +static uint rxIdx; /* index of the current RX buffer */ +static uint txIdx; /* index of the current TX buffer */ + +/* + * FCC Ethernet Tx and Rx buffer descriptors. + * Provide for Double Buffering + * Note: PKTBUFSRX is defined in net.h + */ + +typedef volatile struct rtxbd { + cbd_t rxbd[PKTBUFSRX]; + cbd_t txbd[TX_BUF_CNT]; +} RTXBD; + +/* Good news: the FCC supports external BDs! */ +#ifdef __GNUC__ +static RTXBD rtx __attribute__ ((aligned(8))); +#else +#error "rtx must be 64-bit aligned" +#endif + +int eth_send(volatile void *packet, int length) +{ + int i; + int result = 0; + + if (length <= 0) { + printf("fec: bad packet size: %d\n", length); + goto out; + } + + for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) { + if (i >= TOUT_LOOP) { + printf("fec: tx buffer not ready\n"); + goto out; + } + } + + rtx.txbd[txIdx].cbd_bufaddr = (uint)packet; + rtx.txbd[txIdx].cbd_datlen = length; + rtx.txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST | + BD_ENET_TX_WRAP); + + for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) { + if (i >= TOUT_LOOP) { + printf("fec: tx error\n"); + goto out; + } + } + +#ifdef ET_DEBUG + printf("cycles: %d status: %04x\n", i, rtx.txbd[txIdx].cbd_sc); +#endif + + /* return only status bits */ + result = rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_STATS; + +out: + return result; +} + +int eth_rx(void) +{ + int length; + + for (;;) + { + if (rtx.rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) { + length = -1; + break; /* nothing received - leave for() loop */ + } + length = rtx.rxbd[rxIdx].cbd_datlen; + + if (rtx.rxbd[rxIdx].cbd_sc & 0x003f) { + printf("fec: rx error %04x\n", rtx.rxbd[rxIdx].cbd_sc); + } + else { + /* Pass the packet up to the protocol layers. */ + NetReceive(NetRxPackets[rxIdx], length - 4); + } + + + /* Give the buffer back to the FCC. */ + rtx.rxbd[rxIdx].cbd_datlen = 0; + + /* wrap around buffer index when necessary */ + if ((rxIdx + 1) >= PKTBUFSRX) { + rtx.rxbd[PKTBUFSRX - 1].cbd_sc = (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY); + rxIdx = 0; + } + else { + rtx.rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY; + rxIdx++; + } + } + return length; +} + + +int eth_init(bd_t *bis) +{ + int i; + volatile immap_t *immr = (immap_t *)CFG_IMMR; + volatile cpm8260_t *cp = &(immr->im_cpm); + fcc_enet_t *pram_ptr; + unsigned long mem_addr; + +#if 0 + mii_discover_phy(); +#endif + + /* 28.9 - (1-2): ioports have been set up already */ + + /* 28.9 - (3): connect FCC's tx and rx clocks */ + immr->im_cpmux.cmx_uar = 0; + immr->im_cpmux.cmx_fcr = (immr->im_cpmux.cmx_fcr & ~CFG_CMXFCR_MASK) | + CFG_CMXFCR_VALUE; + + /* 28.9 - (4): GFMR: disable tx/rx, CCITT CRC, Mode Ethernet */ + immr->im_fcc[CONFIG_ETHER_INDEX-1].fcc_gfmr = + FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32; + + /* 28.9 - (5): FPSMR: enable full duplex, select CCITT CRC for Ethernet */ + immr->im_fcc[CONFIG_ETHER_INDEX-1].fcc_fpsmr = CFG_FCC_PSMR | FCC_PSMR_ENCRC; + + /* 28.9 - (6): FDSR: Ethernet Syn */ + immr->im_fcc[CONFIG_ETHER_INDEX-1].fcc_fdsr = 0xD555; + + /* reset indeces to current rx/tx bd (see eth_send()/eth_rx()) */ + rxIdx = 0; + txIdx = 0; + + /* Setup Receiver Buffer Descriptors */ + for (i = 0; i < PKTBUFSRX; i++) + { + rtx.rxbd[i].cbd_sc = BD_ENET_RX_EMPTY; + rtx.rxbd[i].cbd_datlen = 0; + rtx.rxbd[i].cbd_bufaddr = (uint)NetRxPackets[i]; + } + rtx.rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP; + + /* Setup Ethernet Transmitter Buffer Descriptors */ + for (i = 0; i < TX_BUF_CNT; i++) + { + rtx.txbd[i].cbd_sc = (BD_ENET_TX_PAD | BD_ENET_TX_LAST | BD_ENET_TX_TC); + rtx.txbd[i].cbd_datlen = 0; + rtx.txbd[i].cbd_bufaddr = (uint)&txbuf[i][0]; + } + rtx.txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP; + + /* 28.9 - (7): initialise parameter ram */ + pram_ptr = (fcc_enet_t *)&(immr->im_dprambase[PROFF_ENET]); + + /* clear whole structure to make sure all reserved fields are zero */ + memset((void*)pram_ptr, 0, sizeof(fcc_enet_t)); + + /* + * common Parameter RAM area + * + * Allocate space in the reserved FCC area of DPRAM for the + * internal buffers. No one uses this space (yet), so we + * can do this. Later, we will add resource management for + * this area. + */ + mem_addr = CPM_FCC_SPECIAL_BASE + ((CONFIG_ETHER_INDEX-1) * 64); + pram_ptr->fen_genfcc.fcc_riptr = mem_addr; + pram_ptr->fen_genfcc.fcc_tiptr = mem_addr+32; + /* + * Set maximum bytes per receive buffer. + * It must be a multiple of 32. + */ + pram_ptr->fen_genfcc.fcc_mrblr = PKT_MAXBLR_SIZE; + pram_ptr->fen_genfcc.fcc_rstate = (CPMFCR_GBL | CPMFCR_EB | + CFG_CPMFCR_RAMTYPE) << 24; + pram_ptr->fen_genfcc.fcc_rbase = (unsigned int)(&rtx.rxbd[rxIdx]); + pram_ptr->fen_genfcc.fcc_tstate = (CPMFCR_GBL | CPMFCR_EB | + CFG_CPMFCR_RAMTYPE) << 24; + pram_ptr->fen_genfcc.fcc_tbase = (unsigned int)(&rtx.txbd[txIdx]); + + /* protocol-specific area */ + pram_ptr->fen_cmask = 0xdebb20e3; /* CRC mask */ + pram_ptr->fen_cpres = 0xffffffff; /* CRC preset */ + pram_ptr->fen_retlim = 15; /* Retry limit threshold */ + pram_ptr->fen_mflr = PKT_MAXBUF_SIZE; /* maximum frame length register */ + /* + * Set Ethernet station address. + * + * This is supplied in the board information structure, so we + * copy that into the controller. + * So, far we have only been given one Ethernet address. We make + * it unique by setting a few bits in the upper byte of the + * non-static part of the address. + */ +#define ea bis->bi_enetaddr + pram_ptr->fen_paddrh = (ea[5] << 8) + ea[4]; + pram_ptr->fen_paddrm = (ea[3] << 8) + ea[2]; + pram_ptr->fen_paddrl = (ea[1] << 8) + ea[0]; +#undef ea + pram_ptr->fen_minflr = PKT_MINBUF_SIZE; /* minimum frame length register */ + /* pad pointer. use tiptr since we don't need a specific padding char */ + pram_ptr->fen_padptr = pram_ptr->fen_genfcc.fcc_tiptr; + pram_ptr->fen_maxd1 = PKT_MAXDMA_SIZE; /* maximum DMA1 length */ + pram_ptr->fen_maxd2 = PKT_MAXDMA_SIZE; /* maximum DMA2 length */ + pram_ptr->fen_rfthr = 1; + pram_ptr->fen_rfcnt = 1; +#if 0 + printf("pram_ptr->fen_genfcc.fcc_rbase %08lx\n", + pram_ptr->fen_genfcc.fcc_rbase); + printf("pram_ptr->fen_genfcc.fcc_tbase %08lx\n", + pram_ptr->fen_genfcc.fcc_tbase); +#endif + + /* 28.9 - (8): clear out events in FCCE */ + immr->im_fcc[CONFIG_ETHER_INDEX-1].fcc_fcce = ~0x0; + + /* 28.9 - (9): FCCM: mask all events */ + immr->im_fcc[CONFIG_ETHER_INDEX-1].fcc_fccm = 0; + + /* 28.9 - (10-12): we don't use ethernet interrupts */ + + /* 28.9 - (13) + * + * Let's re-initialize the channel now. We have to do it later + * than the manual describes because we have just now finished + * the BD initialization. + */ + cp->cp_cpcr = mk_cr_cmd(CPM_CR_ENET_PAGE, + CPM_CR_ENET_SBLOCK, + 0x0c, + CPM_CR_INIT_TRX) | CPM_CR_FLG; + do { + __asm__ __volatile__ ("eieio"); + } while (cp->cp_cpcr & CPM_CR_FLG); + + /* 28.9 - (14): enable tx/rx in gfmr */ + immr->im_fcc[CONFIG_ETHER_INDEX-1].fcc_gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR; + + return 1; +} + +void eth_halt(void) +{ + volatile immap_t *immr = (immap_t *)CFG_IMMR; + + /* write GFMR: disable tx/rx */ + immr->im_fcc[CONFIG_ETHER_INDEX-1].fcc_gfmr &= + ~(FCC_GFMR_ENT | FCC_GFMR_ENR); +} + +#endif /* CONFIG_ETHER_ON_FCC && CFG_CMD_NET */ diff --git a/cpu/mpc8260/traps.c b/cpu/mpc8260/traps.c new file mode 100644 index 0000000000..a7f6f7e1a7 --- /dev/null +++ b/cpu/mpc8260/traps.c @@ -0,0 +1,246 @@ +/* + * linux/arch/ppc/kernel/traps.c + * + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Modified by Cort Dougan (cort@cs.nmt.edu) + * and Paul Mackerras (paulus@cs.anu.edu.au) + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * This file handles the architecture-dependent parts of hardware exceptions + */ + +#include <common.h> +#include <command.h> +#include <asm/processor.h> + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +int (*debugger_exception_handler)(struct pt_regs *) = 0; +#endif + +/* Returns 0 if exception not found and fixup otherwise. */ +extern unsigned long search_exception_table(unsigned long); + +/* THIS NEEDS CHANGING to use the board info structure. +*/ +#define END_OF_MEM 0x02000000 + +/* + * Trap & Exception support + */ + +void +print_backtrace(unsigned long *sp) +{ + int cnt = 0; + unsigned long i; + + printf("Call backtrace: "); + while (sp) { + if ((uint)sp > END_OF_MEM) + break; + + i = sp[1]; + if (cnt++ % 7 == 0) + printf("\n"); + printf("%08lX ", i); + if (cnt > 32) break; + sp = (unsigned long *)*sp; + } + printf("\n"); +} + +void show_regs(struct pt_regs * regs) +{ + int i; + + printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n", + regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar); + printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n", + regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0, + regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0, + regs->msr&MSR_IR ? 1 : 0, + regs->msr&MSR_DR ? 1 : 0); + + printf("\n"); + for (i = 0; i < 32; i++) { + if ((i % 8) == 0) + { + printf("GPR%02d: ", i); + } + + printf("%08lX ", regs->gpr[i]); + if ((i % 8) == 7) + { + printf("\n"); + } + } +} + + +void +_exception(int signr, struct pt_regs *regs) +{ + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("Exception in kernel pc %lx signal %d",regs->nip,signr); +} + +void +MachineCheckException(struct pt_regs *regs) +{ + unsigned long fixup; + + /* Probing PCI using config cycles cause this exception + * when a device is not present. Catch it and return to + * the PCI exception handler. + */ + if ((fixup = search_exception_table(regs->nip)) != 0) { + regs->nip = fixup; + return; + } + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) + return; +#endif + + printf("Machine check in kernel mode.\n"); + printf("Caused by (from msr): "); + printf("regs %p ",regs); + switch( regs->msr & 0x0000F000) + { + case (1<<12) : + printf("Machine check signal - probably due to mm fault\n" + "with mmu off\n"); + break; + case (1<<13) : + printf("Transfer error ack signal\n"); + break; + case (1<<14) : + printf("Data parity signal\n"); + break; + case (1<<15) : + printf("Address parity signal\n"); + break; + default: + printf("Unknown values in msr\n"); + } + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("machine check"); +} + +void +AlignmentException(struct pt_regs *regs) +{ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) + return; +#endif + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("Alignment Exception"); +} + +void +ProgramCheckException(struct pt_regs *regs) +{ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) + return; +#endif + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("Program Check Exception"); +} + +void +SoftEmuException(struct pt_regs *regs) +{ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) + return; +#endif + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("Software Emulation Exception"); +} + + +void +UnknownException(struct pt_regs *regs) +{ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) + return; +#endif + printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", + regs->nip, regs->msr, regs->trap); + _exception(0, regs); +} + +#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG) +extern void do_bedbug_breakpoint(struct pt_regs *); +#endif + +void +DebugException(struct pt_regs *regs) +{ + + printf("Debugger trap at @ %lx\n", regs->nip ); + show_regs(regs); +#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG) + do_bedbug_breakpoint( regs ); +#endif +} + +/* Probe an address by reading. If not present, return -1, otherwise + * return 0. + */ +int +addr_probe(uint *addr) +{ +#if 0 + int retval; + + __asm__ __volatile__( \ + "1: lwz %0,0(%1)\n" \ + " eieio\n" \ + " li %0,0\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %0,-1\n" \ + " b 2b\n" \ + ".section __ex_table,\"a\"\n" \ + " .align 2\n" \ + " .long 1b,3b\n" \ + ".text" \ + : "=r" (retval) : "r"(addr)); + + return (retval); +#endif + return 0; +} diff --git a/cpu/mpc8xx/traps.c b/cpu/mpc8xx/traps.c new file mode 100644 index 0000000000..c432be6030 --- /dev/null +++ b/cpu/mpc8xx/traps.c @@ -0,0 +1,245 @@ +/* + * linux/arch/ppc/kernel/traps.c + * + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Modified by Cort Dougan (cort@cs.nmt.edu) + * and Paul Mackerras (paulus@cs.anu.edu.au) + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * This file handles the architecture-dependent parts of hardware exceptions + */ + +#include <common.h> +#include <command.h> +#include <asm/processor.h> + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +int (*debugger_exception_handler)(struct pt_regs *) = 0; +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG) +extern void do_bedbug_breakpoint(struct pt_regs *); +#endif + +/* Returns 0 if exception not found and fixup otherwise. */ +extern unsigned long search_exception_table(unsigned long); + +/* THIS NEEDS CHANGING to use the board info structure. +*/ +#define END_OF_MEM 0x02000000 + +/* + * Trap & Exception support + */ + +void +print_backtrace(unsigned long *sp) +{ + int cnt = 0; + unsigned long i; + + printf("Call backtrace: "); + while (sp) { + if ((uint)sp > END_OF_MEM) + break; + + i = sp[1]; + if (cnt++ % 7 == 0) + printf("\n"); + printf("%08lX ", i); + if (cnt > 32) break; + sp = (unsigned long *)*sp; + } + printf("\n"); +} + +void show_regs(struct pt_regs * regs) +{ + int i; + + printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n", + regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar); + printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n", + regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0, + regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0, + regs->msr&MSR_IR ? 1 : 0, + regs->msr&MSR_DR ? 1 : 0); + + printf("\n"); + for (i = 0; i < 32; i++) { + if ((i % 8) == 0) + { + printf("GPR%02d: ", i); + } + + printf("%08lX ", regs->gpr[i]); + if ((i % 8) == 7) + { + printf("\n"); + } + } +} + + +void +_exception(int signr, struct pt_regs *regs) +{ + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("Exception in kernel pc %lx signal %d",regs->nip,signr); +} + +void +MachineCheckException(struct pt_regs *regs) +{ + unsigned long fixup; + + /* Probing PCI using config cycles cause this exception + * when a device is not present. Catch it and return to + * the PCI exception handler. + */ + if ((fixup = search_exception_table(regs->nip)) != 0) { + regs->nip = fixup; + return; + } + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) + return; +#endif + + printf("Machine check in kernel mode.\n"); + printf("Caused by (from msr): "); + printf("regs %p ",regs); + switch( regs->msr & 0x0000F000) + { + case (1<<12) : + printf("Machine check signal - probably due to mm fault\n" + "with mmu off\n"); + break; + case (1<<13) : + printf("Transfer error ack signal\n"); + break; + case (1<<14) : + printf("Data parity signal\n"); + break; + case (1<<15) : + printf("Address parity signal\n"); + break; + default: + printf("Unknown values in msr\n"); + } + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("machine check"); +} + +void +AlignmentException(struct pt_regs *regs) +{ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) + return; +#endif + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("Alignment Exception"); +} + +void +ProgramCheckException(struct pt_regs *regs) +{ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) + return; +#endif + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("Program Check Exception"); +} + +void +SoftEmuException(struct pt_regs *regs) +{ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) + return; +#endif + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("Software Emulation Exception"); +} + + +void +UnknownException(struct pt_regs *regs) +{ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) + return; +#endif + printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", + regs->nip, regs->msr, regs->trap); + _exception(0, regs); +} + +void +DebugException(struct pt_regs *regs) +{ + printf("Debugger trap at @ %lx\n", regs->nip ); + show_regs(regs); +#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG) + do_bedbug_breakpoint( regs ); +#endif +} + +/* Probe an address by reading. If not present, return -1, otherwise + * return 0. + */ +int +addr_probe(uint *addr) +{ +#if 0 + int retval; + + __asm__ __volatile__( \ + "1: lwz %0,0(%1)\n" \ + " eieio\n" \ + " li %0,0\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %0,-1\n" \ + " b 2b\n" \ + ".section __ex_table,\"a\"\n" \ + " .align 2\n" \ + " .long 1b,3b\n" \ + ".text" \ + : "=r" (retval) : "r"(addr)); + + return (retval); +#endif + return 0; +} diff --git a/cpu/mpc8xx/upatch.c b/cpu/mpc8xx/upatch.c new file mode 100644 index 0000000000..99bdf53e27 --- /dev/null +++ b/cpu/mpc8xx/upatch.c @@ -0,0 +1,102 @@ +#include <common.h> +#include <commproc.h> + +#if defined(CFG_I2C_UCODE_PATCH) || defined(CFG_SPI_UCODE_PATCH) + +static void UcodeCopy (volatile cpm8xx_t *cpm); + +void cpm_load_patch (volatile immap_t *immr) +{ + immr->im_cpm.cp_rccr &= ~0x0003; /* Disable microcode program area */ + + UcodeCopy ((cpm8xx_t *)&immr->im_cpm); /* Copy ucode patch to DPRAM */ +#ifdef CFG_SPI_UCODE_PATCH + { + volatile spi_t *spi = (spi_t *) & immr->im_cpm.cp_dparam[PROFF_SPI]; + /* Activate the microcode per the instructions in the microcode manual */ + /* NOTE: We're only relocating the SPI parameters (not I2C). */ + immr->im_cpm.cp_cpmcr1 = 0x802a; /* Write Trap register 1 value */ + immr->im_cpm.cp_cpmcr2 = 0x8028; /* Write Trap register 2 value */ + spi->spi_rpbase = CFG_SPI_DPMEM_OFFSET; /* Where to relocte SPI params */ + } +#endif + +#ifdef CFG_I2C_UCODE_PATCH + { + volatile iic_t *iip = (iic_t *) & immr->im_cpm.cp_dparam[PROFF_IIC]; + /* Activate the microcode per the instructions in the microcode manual */ + /* NOTE: We're only relocating the I2C parameters (not SPI). */ + immr->im_cpm.cp_cpmcr3 = 0x802e; /* Write Trap register 3 value */ + immr->im_cpm.cp_cpmcr4 = 0x802c; /* Write Trap register 4 value */ + iip->iic_rpbase = CFG_I2C_DPMEM_OFFSET; /* Where to relocte I2C params */ + } +#endif + + /* + * Enable DPRAM microcode to execute from the first 512 bytes + * and a 256 byte extension of DPRAM. + */ + immr->im_cpm.cp_rccr |= 0x0001; +} + +static ulong patch_2000[] = { + 0x7FFFEFD9, 0x3FFD0000, 0x7FFB49F7, 0x7FF90000, + 0x5FEFADF7, 0x5F88ADF7, 0x5FEFAFF7, 0x5F88AFF7, + 0x3A9CFBC8, 0x77CAE1BB, 0xF4DE7FAD, 0xABAE9330, + 0x4E08FDCF, 0x6E0FAFF8, 0x7CCF76CF, 0xFDAFF9CF, + 0xABF88DC8, 0xAB5879F7, 0xB0927383, 0xDFD079F7, + 0xB090E6BB, 0xE5BBE74F, 0xB3FA6F0F, 0x6FFB76CE, + 0xEE0CF9CF, 0x2BFBEFEF, 0xCFEEF9CF, 0x76CEAD23, + 0x90B3DF99, 0x7FDDD0C1, 0x4BF847FD, 0x7CCF76CE, + 0xCFEF77CA, 0x7EAF7FAD, 0x7DFDF0B7, 0xEF7A7FCA, + 0x77CAFBC8, 0x6079E722, 0xFBC85FFF, 0xDFFF5FB3, + 0xFFFBFBC8, 0xF3C894A5, 0xE7C9EDF9, 0x7F9A7FAD, + 0x5F36AFE8, 0x5F5BFFDF, 0xDF95CB9E, 0xAF7D5FC3, + 0xAFED8C1B, 0x5FC3AFDD, 0x5FC5DF99, 0x7EFDB0B3, + 0x5FB3FFFE, 0xABAE5FB3, 0xFFFE5FD0, 0x600BE6BB, + 0x600B5FD0, 0xDFC827FB, 0xEFDF5FCA, 0xCFDE3A9C, + 0xE7C9EDF9, 0xF3C87F9E, 0x54CA7FED, 0x2D3A3637, + 0x756F7E9A, 0xF1CE37EF, 0x2E677FEE, 0x10EBADF8, + 0xEFDECFEA, 0xE52F7D9F, 0xE12BF1CE, 0x5F647E9A, + 0x4DF8CFEA, 0x5F717D9B, 0xEFEECFEA, 0x5F73E522, + 0xEFDE5F73, 0xCFDA0B61, 0x7385DF61, 0xE7C9EDF9, + 0x7E9A30D5, 0x1458BFFF, 0xF3C85FFF, 0xDFFFA7F8, + 0x5F5BBFFE, 0x7F7D10D0, 0x144D5F33, 0xBFFFAF78, + 0x5F5BBFFD, 0xA7F85F33, 0xBFFE77FD, 0x30BD4E08, + 0xFDCFE5FF, 0x6E0FAFF8, 0x7EEF7E9F, 0xFDEFF1CF, + 0x5F17ABF8, 0x0D5B5F5B, 0xFFEF79F7, 0x309EAFDD, + 0x5F3147F8, 0x5F31AFED, 0x7FDD50AF, 0x497847FD, + 0x7F9E7FED, 0x7DFD70A9, 0xEF7E7ECE, 0x6BA07F9E, + 0x2D227EFD, 0x30DB5F5B, 0xFFFD5F5B, 0xFFEF5F5B, + 0xFFDF0C9C, 0xAFED0A9A, 0xAFDD0C37, 0x5F37AFBD, + 0x7FBDB081, 0x5F8147F8, +}; + +static ulong patch_2F00[] = { + 0x3E303430, 0x34343737, 0xABBF9B99, 0x4B4FBDBD, + 0x59949334, 0x9FFF37FB, 0x9B177DD9, 0x936956BB, + 0xFBDD697B, 0xDD2FD113, 0x1DB9F7BB, 0x36313963, + 0x79373369, 0x3193137F, 0x7331737A, 0xF7BB9B99, + 0x9BB19795, 0x77FDFD3D, 0x573B773F, 0x737933F7, + 0xB991D115, 0x31699315, 0x31531694, 0xBF4FBDBD, + 0x35931497, 0x35376956, 0xBD697B9D, 0x96931313, + 0x19797937, 0x69350000, +}; + +static void UcodeCopy (volatile cpm8xx_t *cpm) +{ + vu_long *p; + int i; + + p = (vu_long *)&(cpm->cp_dpmem[0x0000]); + for (i=0; i < sizeof(patch_2000)/4; ++i) { + p[i] = patch_2000[i]; + } + + p = (vu_long *)&(cpm->cp_dpmem[0x0F00]); + for (i=0; i < sizeof(patch_2F00)/4; ++i) { + p[i] = patch_2F00[i]; + } +} + +#endif /* CFG_I2C_UCODE_PATCH, CFG_SPI_UCODE_PATCH */ diff --git a/cpu/ppc4xx/miiphy.c b/cpu/ppc4xx/miiphy.c new file mode 100644 index 0000000000..51ba47111b --- /dev/null +++ b/cpu/ppc4xx/miiphy.c @@ -0,0 +1,182 @@ +/*-----------------------------------------------------------------------------+ + | + | This source code has been made available to you by IBM on an AS-IS + | basis. Anyone receiving this source is licensed under IBM + | copyrights to use it in any way he or she deems fit, including + | copying it, modifying it, compiling it, and redistributing it either + | with or without modifications. No license under IBM patents or + | patent applications is to be implied by the copyright license. + | + | Any user of this software should understand that IBM cannot provide + | technical support for this software and will not be responsible for + | any consequences resulting from the use of this software. + | + | Any person who transfers this source code or any derivative work + | must include the IBM copyright notice, this paragraph, and the + | preceding two paragraphs in the transferred software. + | + | COPYRIGHT I B M CORPORATION 1995 + | LICENSED MATERIAL - PROGRAM PROPERTY OF I B M + +-----------------------------------------------------------------------------*/ +/*-----------------------------------------------------------------------------+ + | + | File Name: miiphy.c + | + | Function: This module has utilities for accessing the MII PHY through + | the EMAC3 macro. + | + | Author: Mark Wisner + | + | Change Activity- + | + | Date Description of Change BY + | --------- --------------------- --- + | 05-May-99 Created MKW + | 01-Jul-99 Changed clock setting of sta_reg from 66Mhz to 50Mhz to + | better match OPB speed. Also modified delay times. JWB + | 29-Jul-99 Added Full duplex support MKW + | 24-Aug-99 Removed printf from dp83843_duplex() JWB + | 19-Jul-00 Ported to esd cpci405 sr + | + +-----------------------------------------------------------------------------*/ + +#include <common.h> +#include <asm/processor.h> +#include <ppc_asm.tmpl> +#include <commproc.h> +#include <405gp_enet.h> +#include <405_mal.h> +#include <miiphy.h> + +#if defined(CONFIG_405GP) || defined(CONFIG_440) + + +/***********************************************************/ +/* Dump out to the screen PHY regs */ +/***********************************************************/ + +void miiphy_dump (unsigned char addr) +{ + unsigned long i; + unsigned short data; + + + for (i = 0; i < 0x1A; i++) { + if (miiphy_read (addr, i, &data)) { + printf ("read error for reg %lx\n", i); + return; + } + printf ("Phy reg %lx ==> %4x\n", i, data); + + /* jump to the next set of regs */ + if (i == 0x07) + i = 0x0f; + + } /* end for loop */ +} /* end dump */ + + + +/***********************************************************/ +/* read a phy reg and return the value with a rc */ +/***********************************************************/ + +int miiphy_read (unsigned char addr, unsigned char reg, + unsigned short *value) +{ + unsigned long sta_reg; /* STA scratch area */ + unsigned long i; + + /* see if it is ready for 1000 nsec */ + i = 0; + + /* see if it is ready for sec */ + while ((in32 (EMAC_STACR) & EMAC_STACR_OC) == 0) { + udelay (7); + if (i > 5) { + printf ("read err 1\n"); + return -1; + } + i++; + } + sta_reg = reg; /* reg address */ + /* set clock (50Mhz) and read flags */ + sta_reg = (sta_reg | EMAC_STACR_READ) & ~EMAC_STACR_CLK_100MHZ; + sta_reg = sta_reg | (addr << 5); /* Phy address */ + + out32 (EMAC_STACR, sta_reg); +#if 0 /* test-only */ + printf ("a2: write: EMAC_STACR=0x%0x\n", sta_reg); /* test-only */ +#endif + + sta_reg = in32 (EMAC_STACR); + i = 0; + while ((sta_reg & EMAC_STACR_OC) == 0) { + udelay (7); + if (i > 5) { + printf ("read err 2\n"); + return -1; + } + i++; + sta_reg = in32 (EMAC_STACR); + } + if ((sta_reg & EMAC_STACR_PHYE) != 0) { + printf ("read err 3\n"); + printf ("a2: read: EMAC_STACR=0x%0lx, i=%d\n", + sta_reg, (int) i); /* test-only */ + return -1; + } + + *value = *(short *) (&sta_reg); + return 0; + + +} /* phy_read */ + + +/***********************************************************/ +/* write a phy reg and return the value with a rc */ +/***********************************************************/ + +int miiphy_write (unsigned char addr, unsigned char reg, + unsigned short value) +{ + unsigned long sta_reg; /* STA scratch area */ + unsigned long i; + + /* see if it is ready for 1000 nsec */ + i = 0; + + while ((in32 (EMAC_STACR) & EMAC_STACR_OC) == 0) { + if (i > 5) + return -1; + udelay (7); + i++; + } + sta_reg = 0; + sta_reg = reg; /* reg address */ + /* set clock (50Mhz) and read flags */ + sta_reg = (sta_reg | EMAC_STACR_WRITE) & ~EMAC_STACR_CLK_100MHZ; + sta_reg = sta_reg | ((unsigned long) addr << 5); /* Phy address */ + memcpy (&sta_reg, &value, 2); /* put in data */ + + out32 (EMAC_STACR, sta_reg); + + /* wait for completion */ + i = 0; + sta_reg = in32 (EMAC_STACR); + while ((sta_reg & EMAC_STACR_OC) == 0) { + udelay (7); + if (i > 5) + return -1; + i++; + sta_reg = in32 (EMAC_STACR); + } + + if ((sta_reg & EMAC_STACR_PHYE) != 0) + return -1; + return 0; + +} /* phy_read */ + +#endif /* CONFIG_405GP */ diff --git a/cpu/ppc4xx/traps.c b/cpu/ppc4xx/traps.c new file mode 100644 index 0000000000..85f2ea4cce --- /dev/null +++ b/cpu/ppc4xx/traps.c @@ -0,0 +1,291 @@ +/* + * linux/arch/ppc/kernel/traps.c + * + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Modified by Cort Dougan (cort@cs.nmt.edu) + * and Paul Mackerras (paulus@cs.anu.edu.au) + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * This file handles the architecture-dependent parts of hardware exceptions + */ + +#include <common.h> +#include <command.h> +#include <asm/processor.h> + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +int (*debugger_exception_handler)(struct pt_regs *) = 0; +#endif + +/* Returns 0 if exception not found and fixup otherwise. */ +extern unsigned long search_exception_table(unsigned long); + +/* THIS NEEDS CHANGING to use the board info structure. + */ +#define END_OF_MEM 0x00400000 + + +static __inline__ void set_tsr(unsigned long val) +{ +#if defined(CONFIG_440) + asm volatile("mtspr 0x150, %0" : : "r" (val)); +#else + asm volatile("mttsr %0" : : "r" (val)); +#endif +} + +static __inline__ unsigned long get_esr(void) +{ + unsigned long val; + +#if defined(CONFIG_440) + asm volatile("mfspr %0, 0x03e" : "=r" (val) :); +#else + asm volatile("mfesr %0" : "=r" (val) :); +#endif + return val; +} + +#define ESR_MCI 0x80000000 +#define ESR_PIL 0x08000000 +#define ESR_PPR 0x04000000 +#define ESR_PTR 0x02000000 +#define ESR_DST 0x00800000 +#define ESR_DIZ 0x00400000 +#define ESR_U0F 0x00008000 + +#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG) +extern void do_bedbug_breakpoint(struct pt_regs *); +#endif + +/* + * Trap & Exception support + */ + +void +print_backtrace(unsigned long *sp) +{ + int cnt = 0; + unsigned long i; + + printf("Call backtrace: "); + while (sp) { + if ((uint)sp > END_OF_MEM) + break; + + i = sp[1]; + if (cnt++ % 7 == 0) + printf("\n"); + printf("%08lX ", i); + if (cnt > 32) break; + sp = (unsigned long *)*sp; + } + printf("\n"); +} + +void show_regs(struct pt_regs * regs) +{ + int i; + + printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n", + regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar); + printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n", + regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0, + regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0, + regs->msr&MSR_IR ? 1 : 0, + regs->msr&MSR_DR ? 1 : 0); + + printf("\n"); + for (i = 0; i < 32; i++) { + if ((i % 8) == 0) + { + printf("GPR%02d: ", i); + } + + printf("%08lX ", regs->gpr[i]); + if ((i % 8) == 7) + { + printf("\n"); + } + } +} + + +void +_exception(int signr, struct pt_regs *regs) +{ + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("Exception in kernel pc %lx signal %d",regs->nip,signr); +} + +void +MachineCheckException(struct pt_regs *regs) +{ + unsigned long fixup; + + /* Probing PCI using config cycles cause this exception + * when a device is not present. Catch it and return to + * the PCI exception handler. + */ + if ((fixup = search_exception_table(regs->nip)) != 0) { + regs->nip = fixup; + return; + } + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) + return; +#endif + + printf("Machine check in kernel mode.\n"); + printf("Caused by (from msr): "); + printf("regs %p ",regs); + switch( regs->msr & 0x0000F000) + { + case (1<<12) : + printf("Machine check signal - probably due to mm fault\n" + "with mmu off\n"); + break; + case (1<<13) : + printf("Transfer error ack signal\n"); + break; + case (1<<14) : + printf("Data parity signal\n"); + break; + case (1<<15) : + printf("Address parity signal\n"); + break; + default: + printf("Unknown values in msr\n"); + } + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("machine check"); +} + +void +AlignmentException(struct pt_regs *regs) +{ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) + return; +#endif + + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("Alignment Exception"); +} + +void +ProgramCheckException(struct pt_regs *regs) +{ + long esr_val; + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) + return; +#endif + + show_regs(regs); + + esr_val = get_esr(); + if( esr_val & ESR_PIL ) + printf( "** Illegal Instruction **\n" ); + else if( esr_val & ESR_PPR ) + printf( "** Privileged Instruction **\n" ); + else if( esr_val & ESR_PTR ) + printf( "** Trap Instruction **\n" ); + + print_backtrace((unsigned long *)regs->gpr[1]); + panic("Program Check Exception"); +} + +void +PITException(struct pt_regs *regs) +{ + /* + * Reset PIT interrupt + */ + set_tsr(0x08000000); + + /* + * Call timer_interrupt routine in interrupts.c + */ + timer_interrupt(NULL); +} + + +void +UnknownException(struct pt_regs *regs) +{ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) + return; +#endif + + printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", + regs->nip, regs->msr, regs->trap); + _exception(0, regs); +} + +void +DebugException(struct pt_regs *regs) +{ + printf("Debugger trap at @ %lx\n", regs->nip ); + show_regs(regs); +#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG) + do_bedbug_breakpoint( regs ); +#endif +} + +/* Probe an address by reading. If not present, return -1, otherwise + * return 0. + */ +int +addr_probe(uint *addr) +{ +#if 0 + int retval; + + __asm__ __volatile__( \ + "1: lwz %0,0(%1)\n" \ + " eieio\n" \ + " li %0,0\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %0,-1\n" \ + " b 2b\n" \ + ".section __ex_table,\"a\"\n" \ + " .align 2\n" \ + " .long 1b,3b\n" \ + ".text" \ + : "=r" (retval) : "r"(addr)); + + return (retval); +#endif + return 0; +} |
