diff options
Diffstat (limited to 'cpu/mcf5445x/speed.c')
| -rw-r--r-- | cpu/mcf5445x/speed.c | 217 |
1 files changed, 0 insertions, 217 deletions
diff --git a/cpu/mcf5445x/speed.c b/cpu/mcf5445x/speed.c deleted file mode 100644 index 9c0c07733b..0000000000 --- a/cpu/mcf5445x/speed.c +++ /dev/null @@ -1,217 +0,0 @@ -/* - * - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/processor.h> - -#include <asm/immap.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Low Power Divider specifications - */ -#define CLOCK_LPD_MIN (1 << 0) /* Divider (decoded) */ -#define CLOCK_LPD_MAX (1 << 15) /* Divider (decoded) */ - -#define CLOCK_PLL_FVCO_MAX 540000000 -#define CLOCK_PLL_FVCO_MIN 300000000 - -#define CLOCK_PLL_FSYS_MAX 266666666 -#define CLOCK_PLL_FSYS_MIN 100000000 -#define MHZ 1000000 - -void clock_enter_limp(int lpdiv) -{ - volatile ccm_t *ccm = (volatile ccm_t *)MMAP_CCM; - int i, j; - - /* Check bounds of divider */ - if (lpdiv < CLOCK_LPD_MIN) - lpdiv = CLOCK_LPD_MIN; - if (lpdiv > CLOCK_LPD_MAX) - lpdiv = CLOCK_LPD_MAX; - - /* Round divider down to nearest power of two */ - for (i = 0, j = lpdiv; j != 1; j >>= 1, i++) ; - - /* Apply the divider to the system clock */ - ccm->cdr = (ccm->cdr & 0xF0FF) | CCM_CDR_LPDIV(i); - - /* Enable Limp Mode */ - ccm->misccr |= CCM_MISCCR_LIMP; -} - -/* - * brief Exit Limp mode - * warning The PLL should be set and locked prior to exiting Limp mode - */ -void clock_exit_limp(void) -{ - volatile ccm_t *ccm = (volatile ccm_t *)MMAP_CCM; - volatile pll_t *pll = (volatile pll_t *)MMAP_PLL; - - /* Exit Limp mode */ - ccm->misccr &= ~CCM_MISCCR_LIMP; - - /* Wait for the PLL to lock */ - while (!(pll->psr & PLL_PSR_LOCK)) ; -} - -/* - * get_clocks() fills in gd->cpu_clock and gd->bus_clk - */ -int get_clocks(void) -{ - - volatile ccm_t *ccm = (volatile ccm_t *)MMAP_CCM; - volatile pll_t *pll = (volatile pll_t *)MMAP_PLL; - int pllmult_nopci[] = { 20, 10, 24, 18, 12, 6, 16, 8 }; - int pllmult_pci[] = { 12, 6, 16, 8 }; - int vco = 0, bPci, temp, fbtemp, pcrvalue; - int *pPllmult = NULL; - u16 fbpll_mask; - -#ifdef CONFIG_M54455EVB - volatile u8 *cpld = (volatile u8 *)(CONFIG_SYS_CS2_BASE + 3); -#endif - u8 bootmode; - - /* To determine PCI is present or not */ - if (((ccm->ccr & CCM_CCR_360_FBCONFIG_MASK) == 0x00e0) || - ((ccm->ccr & CCM_CCR_360_FBCONFIG_MASK) == 0x0060)) { - pPllmult = &pllmult_pci[0]; - fbpll_mask = 3; /* 11b */ - bPci = 1; - } else { - pPllmult = &pllmult_nopci[0]; - fbpll_mask = 7; /* 111b */ -#ifdef CONFIG_PCI - gd->pci_clk = 0; -#endif - bPci = 0; - } - -#ifdef CONFIG_M54455EVB - bootmode = (*cpld & 0x03); - - if (bootmode != 3) { - /* Temporary read from CCR- fixed fb issue, must be the same clock - as pci or input clock, causing cpld/fpga read inconsistancy */ - fbtemp = pPllmult[ccm->ccr & fbpll_mask]; - - /* Break down into small pieces, code still in flex bus */ - pcrvalue = pll->pcr & 0xFFFFF0FF; - temp = fbtemp - 1; - pcrvalue |= PLL_PCR_OUTDIV3(temp); - - pll->pcr = pcrvalue; - } -#endif -#ifdef CONFIG_M54451EVB - /* No external logic to read the bootmode, hard coded from built */ -#ifdef CONFIG_CF_SBF - bootmode = 3; -#else - bootmode = 2; - - /* default value is 16 mul, set to 20 mul */ - pcrvalue = (pll->pcr & 0x00FFFFFF) | 0x14000000; - pll->pcr = pcrvalue; - while ((pll->psr & PLL_PSR_LOCK) != PLL_PSR_LOCK); -#endif -#endif - - if (bootmode == 0) { - /* RCON mode */ - vco = pPllmult[ccm->rcon & fbpll_mask] * CONFIG_SYS_INPUT_CLKSRC; - - if ((vco < CLOCK_PLL_FVCO_MIN) || (vco > CLOCK_PLL_FVCO_MAX)) { - /* invaild range, re-set in PCR */ - int temp = ((pll->pcr & PLL_PCR_OUTDIV2_MASK) >> 4) + 1; - int i, j, bus; - - j = (pll->pcr & 0xFF000000) >> 24; - for (i = j; i < 0xFF; i++) { - vco = i * CONFIG_SYS_INPUT_CLKSRC; - if (vco >= CLOCK_PLL_FVCO_MIN) { - bus = vco / temp; - if (bus <= CLOCK_PLL_FSYS_MIN - MHZ) - continue; - else - break; - } - } - pcrvalue = pll->pcr & 0x00FF00FF; - fbtemp = ((i - 1) << 8) | ((i - 1) << 12); - pcrvalue |= ((i << 24) | fbtemp); - - pll->pcr = pcrvalue; - } - gd->vco_clk = vco; /* Vco clock */ - } else if (bootmode == 2) { - /* Normal mode */ - vco = ((pll->pcr & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC; - if ((vco < CLOCK_PLL_FVCO_MIN) || (vco > CLOCK_PLL_FVCO_MAX)) { - /* Default value */ - pcrvalue = (pll->pcr & 0x00FFFFFF); - pcrvalue |= pPllmult[ccm->ccr & fbpll_mask] << 24; - pll->pcr = pcrvalue; - vco = ((pll->pcr & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC; - } - gd->vco_clk = vco; /* Vco clock */ - } else if (bootmode == 3) { - /* serial mode */ - vco = ((pll->pcr & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC; - gd->vco_clk = vco; /* Vco clock */ - } - - if ((ccm->ccr & CCM_MISCCR_LIMP) == CCM_MISCCR_LIMP) { - /* Limp mode */ - } else { - gd->inp_clk = CONFIG_SYS_INPUT_CLKSRC; /* Input clock */ - - temp = (pll->pcr & PLL_PCR_OUTDIV1_MASK) + 1; - gd->cpu_clk = vco / temp; /* cpu clock */ - - temp = ((pll->pcr & PLL_PCR_OUTDIV2_MASK) >> 4) + 1; - gd->bus_clk = vco / temp; /* bus clock */ - - temp = ((pll->pcr & PLL_PCR_OUTDIV3_MASK) >> 8) + 1; - gd->flb_clk = vco / temp; /* FlexBus clock */ - -#ifdef CONFIG_PCI - if (bPci) { - temp = ((pll->pcr & PLL_PCR_OUTDIV4_MASK) >> 12) + 1; - gd->pci_clk = vco / temp; /* PCI clock */ - } -#endif - } - -#ifdef CONFIG_FSL_I2C - gd->i2c1_clk = gd->bus_clk; -#endif - - return (0); -} |
