summaryrefslogtreecommitdiffstats
path: root/cpu/mcf5445x/cpu_init.c
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/mcf5445x/cpu_init.c')
-rw-r--r--cpu/mcf5445x/cpu_init.c45
1 files changed, 39 insertions, 6 deletions
diff --git a/cpu/mcf5445x/cpu_init.c b/cpu/mcf5445x/cpu_init.c
index 48b37dfe7d..8d51d35d68 100644
--- a/cpu/mcf5445x/cpu_init.c
+++ b/cpu/mcf5445x/cpu_init.c
@@ -28,6 +28,7 @@
#include <common.h>
#include <watchdog.h>
#include <asm/immap.h>
+#include <asm/processor.h>
#include <asm/rtc.h>
#if defined(CONFIG_CMD_NET)
@@ -105,6 +106,14 @@ void cpu_init_f(void)
fbcs->csmr5 = CONFIG_SYS_CS5_MASK;
#endif
+ /*
+ * now the flash base address is no longer at 0 (Newer ColdFire family
+ * boot at address 0 instead of 0xFFnn_nnnn). The vector table must
+ * also move to the new location.
+ */
+ if (CONFIG_SYS_CS0_BASE != 0)
+ setvbr(CONFIG_SYS_CS0_BASE);
+
#ifdef CONFIG_FSL_I2C
gpio->par_feci2c = GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA;
#endif
@@ -128,19 +137,43 @@ int cpu_init_r(void)
return (0);
}
-void uart_port_conf(void)
+void uart_port_conf(int port)
{
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
/* Setup Ports: */
- switch (CONFIG_SYS_UART_PORT) {
+ switch (port) {
case 0:
- gpio->par_uart =
+ gpio->par_uart &=
+ ~(GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD);
+ gpio->par_uart |=
(GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD);
break;
case 1:
- gpio->par_uart =
+#ifdef CONFIG_SYS_UART1_PRI_GPIO
+ gpio->par_uart &=
+ ~(GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD);
+ gpio->par_uart |=
(GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD);
+#elif defined(CONFIG_SYS_UART1_ALT1_GPIO)
+ gpio->par_ssi &=
+ (GPIO_PAR_SSI_SRXD_UNMASK | GPIO_PAR_SSI_STXD_UNMASK);
+ gpio->par_ssi |=
+ (GPIO_PAR_SSI_SRXD_U1RXD | GPIO_PAR_SSI_STXD_U1TXD);
+#endif
+ break;
+ case 2:
+#if defined(CONFIG_SYS_UART2_ALT1_GPIO)
+ gpio->par_timer &=
+ (GPIO_PAR_TIMER_T3IN_UNMASK | GPIO_PAR_TIMER_T2IN_UNMASK);
+ gpio->par_timer |=
+ (GPIO_PAR_TIMER_T3IN_U2RXD | GPIO_PAR_TIMER_T2IN_U2TXD);
+#elif defined(CONFIG_SYS_UART2_ALT2_GPIO)
+ gpio->par_timer &=
+ (GPIO_PAR_FECI2C_SCL_UNMASK | GPIO_PAR_FECI2C_SDA_UNMASK);
+ gpio->par_timer |=
+ (GPIO_PAR_FECI2C_SCL_U2TXD | GPIO_PAR_FECI2C_SDA_U2RXD);
+#endif
break;
}
}
@@ -164,9 +197,9 @@ int fecpin_setclear(struct eth_device *dev, int setclear)
~(GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
- gpio->par_fec &= GPIO_PAR_FEC_FEC0_MASK;
+ gpio->par_fec &= GPIO_PAR_FEC_FEC0_UNMASK;
else
- gpio->par_fec &= GPIO_PAR_FEC_FEC1_MASK;
+ gpio->par_fec &= GPIO_PAR_FEC_FEC1_UNMASK;
}
return 0;
}
OpenPOWER on IntegriCloud