diff options
Diffstat (limited to 'cpu/mcf532x/cpu_init.c')
| -rw-r--r-- | cpu/mcf532x/cpu_init.c | 141 |
1 files changed, 141 insertions, 0 deletions
diff --git a/cpu/mcf532x/cpu_init.c b/cpu/mcf532x/cpu_init.c new file mode 100644 index 0000000000..93086f74bf --- /dev/null +++ b/cpu/mcf532x/cpu_init.c @@ -0,0 +1,141 @@ +/* + * + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2007 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <watchdog.h> + +#include <asm/immap.h> + +/* + * Breath some life into the CPU... + * + * Set up the memory map, + * initialize a bunch of registers, + * initialize the UPM's + */ +void cpu_init_f(void) +{ + volatile scm1_t *scm1 = (scm1_t *) MMAP_SCM1; + volatile scm2_t *scm2 = (scm2_t *) MMAP_SCM2; + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; + volatile wdog_t *wdog = (wdog_t *) MMAP_WDOG; + + /* watchdog is enabled by default - disable the watchdog */ +#ifndef CONFIG_WATCHDOG + wdog->cr = 0; +#endif + + scm1->mpr0 = 0x77777777; + scm2->pacra = 0; + scm2->pacrb = 0; + scm2->pacrc = 0; + scm2->pacrd = 0; + scm2->pacre = 0; + scm2->pacrf = 0; + scm2->pacrg = 0; + scm1->pacrh = 0; + + /* Port configuration */ + gpio->par_cs = 0; + +#if (defined(CFG_CS0_BASE) && defined(CFG_CS0_MASK) && defined(CFG_CS0_CTRL)) + fbcs->csar0 = CFG_CS0_BASE; + fbcs->cscr0 = CFG_CS0_CTRL; + fbcs->csmr0 = CFG_CS0_MASK; +#endif + +#if (defined(CFG_CS1_BASE) && defined(CFG_CS1_MASK) && defined(CFG_CS1_CTRL)) + /* Latch chipselect */ + gpio->par_cs |= GPIO_PAR_CS1; + fbcs->csar1 = CFG_CS1_BASE; + fbcs->cscr1 = CFG_CS1_CTRL; + fbcs->csmr1 = CFG_CS1_MASK; +#endif + +#if (defined(CFG_CS2_BASE) && defined(CFG_CS2_MASK) && defined(CFG_CS2_CTRL)) + gpio->par_cs |= GPIO_PAR_CS2; + fbcs->csar2 = CFG_CS2_BASE; + fbcs->cscr2 = CFG_CS2_CTRL; + fbcs->csmr2 = CFG_CS2_MASK; +#endif + +#if (defined(CFG_CS3_BASE) && defined(CFG_CS3_MASK) && defined(CFG_CS3_CTRL)) + gpio->par_cs |= GPIO_PAR_CS3; + fbcs->csar3 = CFG_CS3_BASE; + fbcs->cscr3 = CFG_CS3_CTRL; + fbcs->csmr3 = CFG_CS3_MASK; +#endif + +#if (defined(CFG_CS4_BASE) && defined(CFG_CS4_MASK) && defined(CFG_CS4_CTRL)) + gpio->par_cs |= GPIO_PAR_CS4; + fbcs->csar4 = CFG_CS4_BASE; + fbcs->cscr4 = CFG_CS4_CTRL; + fbcs->csmr4 = CFG_CS4_MASK; +#endif + +#if (defined(CFG_CS5_BASE) && defined(CFG_CS5_MASK) && defined(CFG_CS5_CTRL)) + gpio->par_cs |= GPIO_PAR_CS5; + fbcs->csar5 = CFG_CS5_BASE; + fbcs->cscr5 = CFG_CS5_CTRL; + fbcs->csmr5 = CFG_CS5_MASK; +#endif + +#ifdef CONFIG_FSL_I2C + gpio->par_feci2c = GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA; +#endif + + icache_enable(); +} + +/* + * initialize higher level parts of CPU like timers + */ +int cpu_init_r(void) +{ + return (0); +} + +void uart_port_conf(void) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + /* Setup Ports: */ + switch (CFG_UART_PORT) { + case 0: + gpio->par_uart = (GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0); + break; + case 1: + gpio->par_uart = + (GPIO_PAR_UART_TXD1(3) | GPIO_PAR_UART_RXD1(3)); + break; + case 2: + gpio->par_timer &= 0x0F; + gpio->par_timer |= (GPIO_PAR_TIN3_URXD2 | GPIO_PAR_TIN2_UTXD2); + break; + } +} |
