diff options
Diffstat (limited to 'cpu/ixp/npe/include/IxPerfProfAcc.h')
| -rw-r--r-- | cpu/ixp/npe/include/IxPerfProfAcc.h | 1358 |
1 files changed, 0 insertions, 1358 deletions
diff --git a/cpu/ixp/npe/include/IxPerfProfAcc.h b/cpu/ixp/npe/include/IxPerfProfAcc.h deleted file mode 100644 index 65c0ba96ab..0000000000 --- a/cpu/ixp/npe/include/IxPerfProfAcc.h +++ /dev/null @@ -1,1358 +0,0 @@ -/** - * @file IxPerfProfAcc.h - * - * @brief Header file for the IXP400 Perf Prof component (IxPerfProfAcc) - * - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @par - * -- End of Copyright Notice -- - */ - -/** - * @defgroup IxPerfProfAcc IXP400 Performance Profiling (IxPerfProfAcc) API - * - * @brief IXP400 Performance Profiling Utility component Public API. - * @li NOTE: Xcycle measurement is not supported in Linux. - * - * - * @{ - */ -#ifndef IXPERFPROFACC_H -#define IXPERFPROFACC_H - -#include "IxOsal.h" - -#ifdef __linux -#include <linux/proc_fs.h> -#endif - -/* - * Section for #define - */ -/** - * @ingroup IxPerfProfAcc - * - * @def IX_PERFPROF_ACC_XSCALE_PMU_MAX_PROFILE_SAMPLES - * - * @brief This is the maximum number of profiling samples allowed, which can be - * modified according to the user's discretion - */ -#define IX_PERFPROF_ACC_XSCALE_PMU_MAX_PROFILE_SAMPLES 0xFFFF - -/** - * @ingroup IxPerfProfAcc - * - * @def IX_PERFPROF_ACC_BUS_PMU_MAX_PECS - * - * @brief This is the maximum number of Programmable Event Counters available. - * This is a hardware specific and fixed value. Do not change. - * - */ -#define IX_PERFPROF_ACC_BUS_PMU_MAX_PECS 7 - -/** - * @ingroup IxPerfProfAcc - * - * @def IX_PERFPROF_ACC_XCYCLE_MAX_NUM_OF_MEASUREMENTS - * - * @brief Max number of measurement allowed. This constant is used when - * creating storage array for Xcycle. When run in continuous mode, - * Xcycle will wrap around and re-use buffer. - */ -#define IX_PERFPROF_ACC_XCYCLE_MAX_NUM_OF_MEASUREMENTS 600 - -#ifdef __linux -/** - * @ingroup IxPerfProfAcc - * - * @def IX_PERFPROF_ACC_XSCALE_PMU_SYMBOL_ACCURACY - * - * @brief Level of accuracy required for matching the PC Address to - * symbol address. This is used when the XScale PMU time/event - * sampling functions get the PC address and search for the - * corresponding symbol address. - */ -#define IX_PERFPROF_ACC_XSCALE_PMU_SYMBOL_ACCURACY 0xffff - -#endif /*__linux*/ - -/** - * @ingroup IxPerfProfAcc - * - * @def IX_PERFPROF_ACC_LOG - * - * @brief Mechanism for logging a formatted message for the PerfProfAcc component - * - * @param level UINT32 [in] - trace level - * @param device UINT32 [in] - output device - * @param str char* [in] - format string, similar to printf(). - * @param a UINT32 [in] - first argument to display - * @param b UINT32 [in] - second argument to display - * @param c UINT32 [in] - third argument to display - * @param d UINT32 [in] - fourth argument to display - * @param e UINT32 [in] - fifth argument to display - * @param f UINT32 [in] - sixth argument to display - * - * @return none - */ -#ifndef NDEBUG -#define IX_PERFPROF_ACC_LOG(level, device, str, a, b, c, d, e, f)\ - (ixOsalLog (level, device, str, a, b, c, d, e, f)) -#else /*do nothing*/ -#define IX_PERFPROF_ACC_LOG(level, device, str, a, b, c, d, e, f) -#endif /*ifdef NDEBUG */ - -/* - * Section for struct - */ - -/** - * @brief contains summary of samples taken - * - * Structure contains all details of each program counter value - frequency - * that PC occurs - */ -typedef struct -{ - UINT32 programCounter; /**<the program counter value of the sample*/ - UINT32 freq; /**<the frequency of the occurence of the sample*/ -} IxPerfProfAccXscalePmuSamplePcProfile; - -/** - * @brief contains results of a counter - * - * Structure contains the results of a counter, which are split into the lower - * and upper 32 bits of the final count - */ -typedef struct -{ - UINT32 lower32BitsEventCount; /**<lower 32bits value of the event counter*/ - UINT32 upper32BitsEventCount; /**<upper 32bits value of the event counter*/ -} IxPerfProfAccXscalePmuEvtCnt; - -/** - * @brief contains results of counters and their overflow - * - * Structure contains all values of counters and associated overflows. The - * specific event and clock counters are determined by the user - */ -typedef struct -{ - UINT32 clk_value; /**<current value of clock counter*/ - UINT32 clk_samples; /**<number of clock counter overflows*/ - UINT32 event1_value; /**<current value of event 1 counter*/ - UINT32 event1_samples; /**<number of event 1 counter overflows*/ - UINT32 event2_value; /**<current value of event 2 counter*/ - UINT32 event2_samples; /**<number of event 2 counter overflows*/ - UINT32 event3_value; /**<current value of event 3 counter*/ - UINT32 event3_samples; /**<number of event 3 counter overflows*/ - UINT32 event4_value; /**<current value of event 4 counter*/ - UINT32 event4_samples; /**<number of event 4 counter overflows*/ -} IxPerfProfAccXscalePmuResults; - -/** - * - * @brief Results obtained from Xcycle run - */ -typedef struct -{ - float maxIdlePercentage; /**<maximum percentage of Idle cycles*/ - float minIdlePercentage; /**<minimum percentage of Idle cycles*/ - float aveIdlePercentage; /**<average percentage of Idle cycles*/ - UINT32 totalMeasurements; /**<total number of measurement made */ -} IxPerfProfAccXcycleResults; - -/** - * - * @brief Results obtained from running the Bus Pmu component. The results - * are obtained when the get functions is called. - * - */ -typedef struct -{ - UINT32 statsToGetLower27Bit[IX_PERFPROF_ACC_BUS_PMU_MAX_PECS]; /**<Lower 27 Bit of counter value */ - UINT32 statsToGetUpper32Bit[IX_PERFPROF_ACC_BUS_PMU_MAX_PECS]; /**<Upper 32 Bit of counter value */ -} IxPerfProfAccBusPmuResults; - -/* - * Section for enum - */ - -/** - * @ingroup IxPerfProfAcc - * - * @enum IxPerfProfAccBusPmuEventCounters1 - * - * @brief Type of bus pmu events supported on PEC 1. - * - * Lists all bus pmu events. - */ -typedef enum -{ - IX_PERFPROF_ACC_BUS_PMU_PEC1_NORTH_NPEA_GRANT_SELECT = 1, /**< Select North NPEA grant on PEC1*/ - IX_PERFPROF_ACC_BUS_PMU_PEC1_NORTH_NPEB_GRANT_SELECT, /**< Select North NPEB grant on PEC1*/ - IX_PERFPROF_ACC_BUS_PMU_PEC1_NORTH_NPEC_GRANT_SELECT, /**< Select North NPEC grant on PEC1*/ - IX_PERFPROF_ACC_BUS_PMU_PEC1_NORTH_BUS_IDLE_SELECT, /**< Select North bus idle on PEC1*/ - IX_PERFPROF_ACC_BUS_PMU_PEC1_NORTH_NPEA_REQ_SELECT, /**< Select North NPEA req on PEC1*/ - IX_PERFPROF_ACC_BUS_PMU_PEC1_NORTH_NPEB_REQ_SELECT, /**< Select North NPEB req on PEC1*/ - IX_PERFPROF_ACC_BUS_PMU_PEC1_NORTH_NPEC_REQ_SELECT, /**< Select North NPEC req on PEC1*/ - - IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_GSKT_GRANT_SELECT, /**< Select south gasket grant on PEC1*/ - IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_ABB_GRANT_SELECT, /**< Select south abb grant on PEC1*/ - IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_PCI_GRANT_SELECT, /**< Select south pci grant on PEC1*/ - IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_APB_GRANT_SELECT, /**< Select south apb grant on PEC1*/ - IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_GSKT_REQ_SELECT, /**< Select south gasket request on PEC1*/ - IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_ABB_REQ_SELECT, /**< Select south abb request on PEC1*/ - IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_PCI_REQ_SELECT, /**< Select south pci request on PEC1*/ - IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_APB_REQ_SELECT, /**< Select south apb request on PEC1*/ - - IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_0_HIT_SELECT, /**< Select sdram0 hit on PEC1*/ - IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_1_HIT_SELECT, /**< Select sdram1 hit on PEC1*/ - IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_2_HIT_SELECT, /**< Select sdram2 hit on PEC1*/ - IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_3_HIT_SELECT, /**< Select sdram3 hit on PEC1*/ - IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_4_MISS_SELECT, /**< Select sdram4 miss on PEC1*/ - IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_5_MISS_SELECT, /**< Select sdram5 miss on PEC1*/ - IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_6_MISS_SELECT, /**< Select sdram6 miss on PEC1*/ - IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_7_MISS_SELECT /**< Select sdram7 miss on PEC1*/ -} IxPerfProfAccBusPmuEventCounters1; - -/** - * @ingroup IxPerfProfAcc - * - * @enum IxPerfProfAccBusPmuEventCounters2 - * - * @brief Type of bus pmu events supported on PEC 2. - * - * Lists all bus pmu events. - */ -typedef enum -{ - IX_PERFPROF_ACC_BUS_PMU_PEC2_NORTH_NPEA_XFER_SELECT = 24, /**< Select North NPEA transfer on PEC2*/ - IX_PERFPROF_ACC_BUS_PMU_PEC2_NORTH_NPEB_XFER_SELECT, /**< Select North NPEB transfer on PEC2*/ - IX_PERFPROF_ACC_BUS_PMU_PEC2_NORTH_NPEC_XFER_SELECT, /**< Select North NPEC transfer on PEC2*/ - IX_PERFPROF_ACC_BUS_PMU_PEC2_NORTH_BUS_WRITE_SELECT, /**< Select North bus write on PEC2*/ - IX_PERFPROF_ACC_BUS_PMU_PEC2_NORTH_NPEA_OWN_SELECT, /**< Select North NPEA own on PEC2*/ - IX_PERFPROF_ACC_BUS_PMU_PEC2_NORTH_NPEB_OWN_SELECT, /**< Select North NPEB own on PEC2*/ - IX_PERFPROF_ACC_BUS_PMU_PEC2_NORTH_NPEC_OWN_SELECT, /**< Select North NPEC own on PEC2*/ - - IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_GSKT_XFER_SELECT, /**< Select South gasket transfer on PEC2*/ - IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_ABB_XFER_SELECT, /**< Select South abb transfer on PEC2*/ - IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_PCI_XFER_SELECT, /**< Select South pci transfer on PEC2*/ - IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_APB_XFER_SELECT, /**< Select South apb transfer on PEC2*/ - IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_GSKT_OWN_SELECT, /**< Select South gasket own on PEC2*/ - IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_ABB_OWN_SELECT, /**< Select South abb own on PEC2*/ - IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_PCI_OWN_SELECT, /**< Select South pci own on PEC2*/ - IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_APB_OWN_SELECT, /**< Select South apb own transfer on PEC2*/ - - IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_1_HIT_SELECT, /**< Select sdram1 hit on PEC2*/ - IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_2_HIT_SELECT, /**< Select sdram2 hit on PEC2*/ - IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_3_HIT_SELECT, /**< Select sdram3 hit on PEC2*/ - IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_4_HIT_SELECT, /**< Select sdram4 hit on PEC2*/ - IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_5_MISS_SELECT, /**< Select sdram5 miss on PEC2*/ - IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_6_MISS_SELECT, /**< Select sdram6 miss on PEC2*/ - IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_7_MISS_SELECT, /**< Select sdram7 miss on PEC2*/ - IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_0_MISS_SELECT /**< Select sdram0 miss on PEC2*/ -} IxPerfProfAccBusPmuEventCounters2; - -/** - * @ingroup IxPerfProfAcc - * - * @enum IxPerfProfAccBusPmuEventCounters3 - * - * @brief Type of bus pmu events supported on PEC 3. - * - * Lists all bus pmu events. - */ -typedef enum -{ - IX_PERFPROF_ACC_BUS_PMU_PEC3_NORTH_NPEA_RETRY_SELECT = 47, /**< Select north NPEA retry on PEC3*/ - IX_PERFPROF_ACC_BUS_PMU_PEC3_NORTH_NPEB_RETRY_SELECT, /**< Select north NPEB retry on PEC3*/ - IX_PERFPROF_ACC_BUS_PMU_PEC3_NORTH_NPEC_RETRY_SELECT, /**< Select north NPEC retry on PEC3*/ - IX_PERFPROF_ACC_BUS_PMU_PEC3_NORTH_BUS_READ_SELECT, /**< Select north bus read on PEC3*/ - IX_PERFPROF_ACC_BUS_PMU_PEC3_NORTH_NPEA_WRITE_SELECT, /**< Select north NPEA write on PEC3*/ - IX_PERFPROF_ACC_BUS_PMU_PEC3_NORTH_NPEB_WRITE_SELECT, /**< Select north NPEB write on PEC3*/ - IX_PERFPROF_ACC_BUS_PMU_PEC3_NORTH_NPEC_WRITE_SELECT, /**< Select north NPEC wirte on PEC3*/ - - IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_GSKT_RETRY_SELECT, /**< Select south gasket retry on PEC3*/ - IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_ABB_RETRY_SELECT, /**< Select south abb retry on PEC3*/ - IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_PCI_RETRY_SELECT, /**< Select south pci retry on PEC3*/ - IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_APB_RETRY_SELECT, /**< Select south apb retry on PEC3*/ - IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_GSKT_WRITE_SELECT, /**< Select south gasket write on PEC3*/ - IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_ABB_WRITE_SELECT, /**< Select south abb write on PEC3*/ - IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_PCI_WRITE_SELECT, /**< Select south pci write on PEC3*/ - IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_APB_WRITE_SELECT, /**< Select south apb write on PEC3*/ - - IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_2_HIT_SELECT, /**< Select sdram2 hit on PEC3*/ - IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_3_HIT_SELECT, /**< Select sdram3 hit on PEC3*/ - IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_4_HIT_SELECT, /**< Select sdram4 hit on PEC3*/ - IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_5_HIT_SELECT, /**< Select sdram5 hit on PEC3*/ - IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_6_MISS_SELECT, /**< Select sdram6 miss on PEC3*/ - IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_7_MISS_SELECT, /**< Select sdram7 miss on PEC3*/ - IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_0_MISS_SELECT, /**< Select sdram0 miss on PEC3*/ - IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_1_MISS_SELECT /**< Select sdram1 miss on PEC3*/ -} IxPerfProfAccBusPmuEventCounters3; - -/** - * @ingroup IxPerfProfAcc - * - * @enum IxPerfProfAccBusPmuEventCounters4 - * - * @brief Type of bus pmu events supported on PEC 4. - * - * Lists all bus pmu events. - */ -typedef enum -{ - IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_PCI_SPLIT_SELECT = 70, /**< Select south pci split on PEC4*/ - IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_EXP_SPLIT_SELECT, /**< Select south expansion split on PEC4*/ - IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_APB_GRANT_SELECT, /**< Select south apb grant on PEC4*/ - IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_APB_XFER_SELECT, /**< Select south apb transfer on PEC4*/ - IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_GSKT_READ_SELECT, /**< Select south gasket read on PEC4*/ - IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_ABB_READ_SELECT, /**< Select south abb read on PEC4*/ - IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_PCI_READ_SELECT, /**< Select south pci read on PEC4*/ - IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_APB_READ_SELECT, /**< Select south apb read on PEC4*/ - - IX_PERFPROF_ACC_BUS_PMU_PEC4_NORTH_ABB_SPLIT_SELECT, /**< Select north abb split on PEC4*/ - IX_PERFPROF_ACC_BUS_PMU_PEC4_NORTH_NPEA_REQ_SELECT, /**< Select north NPEA req on PEC4*/ - IX_PERFPROF_ACC_BUS_PMU_PEC4_NORTH_NPEA_READ_SELECT, /**< Select north NPEA read on PEC4*/ - IX_PERFPROF_ACC_BUS_PMU_PEC4_NORTH_NPEB_READ_SELECT, /**< Select north NPEB read on PEC4*/ - IX_PERFPROF_ACC_BUS_PMU_PEC4_NORTH_NPEC_READ_SELECT, /**< Select north NPEC read on PEC4*/ - - IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_3_HIT_SELECT, /**< Select sdram3 hit on PEC4*/ - IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_4_HIT_SELECT, /**< Select sdram4 hit on PEC4*/ - IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_5_HIT_SELECT, /**< Select sdram5 hit on PEC4*/ - IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_6_HIT_SELECT, /**< Select sdram6 hit on PEC4*/ - IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_7_MISS_SELECT, /**< Select sdram7 miss on PEC4*/ - IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_0_MISS_SELECT, /**< Select sdram0 miss on PEC4*/ - IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_1_MISS_SELECT, /**< Select sdram1 miss on PEC4*/ - IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_2_MISS_SELECT /**< Select sdram2 miss on PEC4*/ -} IxPerfProfAccBusPmuEventCounters4; - -/** - * @ingroup IxPerfProfAcc - * - * @enum IxPerfProfAccBusPmuEventCounters5 - * - * @brief Type of bus pmu events supported on PEC 5. - * - * Lists all bus pmu events. - */ -typedef enum -{ - IX_PERFPROF_ACC_BUS_PMU_PEC5_SOUTH_ABB_GRANT_SELECT = 91, /**< Select south abb grant on PEC5*/ - IX_PERFPROF_ACC_BUS_PMU_PEC5_SOUTH_ABB_XFER_SELECT, /**< Select south abb transfer on PEC5*/ - IX_PERFPROF_ACC_BUS_PMU_PEC5_SOUTH_ABB_RETRY_SELECT, /**< Select south abb retry on PEC5*/ - IX_PERFPROF_ACC_BUS_PMU_PEC5_SOUTH_EXP_SPLIT_SELECT, /**< Select south expansion split on PEC5*/ - IX_PERFPROF_ACC_BUS_PMU_PEC5_SOUTH_ABB_REQ_SELECT, /**< Select south abb request on PEC5*/ - IX_PERFPROF_ACC_BUS_PMU_PEC5_SOUTH_ABB_OWN_SELECT, /**< Select south abb own on PEC5*/ - IX_PERFPROF_ACC_BUS_PMU_PEC5_SOUTH_BUS_IDLE_SELECT, /**< Select south bus idle on PEC5*/ - - IX_PERFPROF_ACC_BUS_PMU_PEC5_NORTH_NPEB_GRANT_SELECT, /**< Select north NPEB grant on PEC5*/ - IX_PERFPROF_ACC_BUS_PMU_PEC5_NORTH_NPEB_XFER_SELECT, /**< Select north NPEB transfer on PEC5*/ - IX_PERFPROF_ACC_BUS_PMU_PEC5_NORTH_NPEB_RETRY_SELECT, /**< Select north NPEB retry on PEC5*/ - IX_PERFPROF_ACC_BUS_PMU_PEC5_NORTH_NPEB_REQ_SELECT, /**< Select north NPEB request on PEC5*/ - IX_PERFPROF_ACC_BUS_PMU_PEC5_NORTH_NPEB_OWN_SELECT, /**< Select north NPEB own on PEC5*/ - IX_PERFPROF_ACC_BUS_PMU_PEC5_NORTH_NPEB_WRITE_SELECT, /**< Select north NPEB write on PEC5*/ - IX_PERFPROF_ACC_BUS_PMU_PEC5_NORTH_NPEB_READ_SELECT, /**< Select north NPEB read on PEC5*/ - - IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_4_HIT_SELECT, /**< Select north sdram4 hit on PEC5*/ - IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_5_HIT_SELECT, /**< Select north sdram5 hit on PEC5*/ - IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_6_HIT_SELECT, /**< Select north sdram6 hit on PEC5*/ - IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_7_HIT_SELECT, /**< Select north sdram7 hit on PEC5*/ - IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_0_MISS_SELECT, /**< Select north sdram0 miss on PEC5*/ - IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_1_MISS_SELECT, /**< Select north sdram1 miss on PEC5*/ - IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_2_MISS_SELECT, /**< Select north sdram2 miss on PEC5*/ - IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_3_MISS_SELECT /**< Select north sdram3 miss on PEC5*/ -} IxPerfProfAccBusPmuEventCounters5; - -/** - * @ingroup IxPerfProfAcc - * - * @enum IxPerfProfAccBusPmuEventCounters6 - * - * @brief Type of bus pmu events supported on PEC 6. - * - * Lists all bus pmu events. - */ -typedef enum -{ - IX_PERFPROF_ACC_BUS_PMU_PEC6_SOUTH_PCI_GRANT_SELECT = 113, /**< Select south pci grant on PEC6*/ - IX_PERFPROF_ACC_BUS_PMU_PEC6_SOUTH_PCI_XFER_SELECT, /**< Select south pci transfer on PEC6*/ - IX_PERFPROF_ACC_BUS_PMU_PEC6_SOUTH_PCI_RETRY_SELECT, /**< Select south pci retry on PEC6*/ - IX_PERFPROF_ACC_BUS_PMU_PEC6_SOUTH_PCI_SPLIT_SELECT, /**< Select south pci split on PEC6*/ - IX_PERFPROF_ACC_BUS_PMU_PEC6_SOUTH_PCI_REQ_SELECT, /**< Select south pci request on PEC6*/ - IX_PERFPROF_ACC_BUS_PMU_PEC6_SOUTH_PCI_OWN_SELECT, /**< Select south pci own on PEC6*/ - IX_PERFPROF_ACC_BUS_PMU_PEC6_SOUTH_BUS_WRITE_SELECT, /**< Select south pci write on PEC6*/ - - IX_PERFPROF_ACC_BUS_PMU_PEC6_NORTH_NPEC_GRANT_SELECT, /**< Select north NPEC grant on PEC6*/ - IX_PERFPROF_ACC_BUS_PMU_PEC6_NORTH_NPEC_XFER_SELECT, /**< Select north NPEC transfer on PEC6*/ - IX_PERFPROF_ACC_BUS_PMU_PEC6_NORTH_NPEC_RETRY_SELECT, /**< Select north NPEC retry on PEC6*/ - IX_PERFPROF_ACC_BUS_PMU_PEC6_NORTH_NPEC_REQ_SELECT, /**< Select north NPEC request on PEC6*/ - IX_PERFPROF_ACC_BUS_PMU_PEC6_NORTH_NPEC_OWN_SELECT, /**< Select north NPEC own on PEC6*/ - IX_PERFPROF_ACC_BUS_PMU_PEC6_NORTH_NPEB_WRITE_SELECT, /**< Select north NPEB write on PEC6*/ - IX_PERFPROF_ACC_BUS_PMU_PEC6_NORTH_NPEC_READ_SELECT, /**< Select north NPEC read on PEC6*/ - - IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_5_HIT_SELECT, /**< Select sdram5 hit on PEC6*/ - IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_6_HIT_SELECT, /**< Select sdram6 hit on PEC6*/ - IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_7_HIT_SELECT, /**< Select sdram7 hit on PEC6*/ - IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_0_HIT_SELECT, /**< Select sdram0 hit on PEC6*/ - IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_1_MISS_SELECT, /**< Select sdram1 miss on PEC6*/ - IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_2_MISS_SELECT, /**< Select sdram2 miss on PEC6*/ - IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_3_MISS_SELECT, /**< Select sdram3 miss on PEC6*/ - IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_4_MISS_SELECT /**< Select sdram4 miss on PEC6*/ -} IxPerfProfAccBusPmuEventCounters6; - -/** - * @ingroup IxPerfProfAcc - * - * @enum IxPerfProfAccBusPmuEventCounters7 - * - * @brief Type of bus pmu events supported on PEC 7. - * - * Lists all bus pmu events. - */ -typedef enum -{ - IX_PERFPROF_ACC_BUS_PMU_PEC7_SOUTH_APB_RETRY_SELECT = 135, /**< Select south apb retry on PEC7*/ - IX_PERFPROF_ACC_BUS_PMU_PEC7_SOUTH_APB_REQ_SELECT, /**< Select south apb request on PEC7*/ - IX_PERFPROF_ACC_BUS_PMU_PEC7_SOUTH_APB_OWN_SELECT, /**< Select south apb own on PEC7*/ - IX_PERFPROF_ACC_BUS_PMU_PEC7_SOUTH_BUS_READ_SELECT, /**< Select south bus read on PEC7*/ - IX_PERFPROF_ACC_BUS_PMU_PEC7_CYCLE_COUNT_SELECT /**< Select cycle count on PEC7*/ -} IxPerfProfAccBusPmuEventCounters7; - -/** - * @ingroup IxPerfProfAcc - * - * @enum IxPerfProfAccXscalePmuEvent - * - * @brief Type of xscale pmu events supported - * - * Lists all xscale pmu events. The maximum is a default value that the user - * should not exceed. - */ -typedef enum -{ - IX_PERFPROF_ACC_XSCALE_PMU_EVENT_CACHE_MISS=0, /**< cache miss*/ - IX_PERFPROF_ACC_XSCALE_PMU_EVENT_CACHE_INSTRUCTION,/**< cache instruction*/ - IX_PERFPROF_ACC_XSCALE_PMU_EVENT_STALL, /**< event stall*/ - IX_PERFPROF_ACC_XSCALE_PMU_EVENT_INST_TLB_MISS, /**< instruction tlb miss*/ - IX_PERFPROF_ACC_XSCALE_PMU_EVENT_DATA_TLB_MISS, /**< data tlb miss*/ - IX_PERFPROF_ACC_XSCALE_PMU_EVENT_BRANCH_EXEC, /**< branch executed*/ - IX_PERFPROF_ACC_XSCALE_PMU_EVENT_BRANCH_MISPREDICT, /**<branch mispredict*/ - IX_PERFPROF_ACC_XSCALE_PMU_EVENT_INST_EXEC, /**< instruction executed*/ - IX_PERFPROF_ACC_XSCALE_PMU_EVENT_FULL_EVERYCYCLE, /**< - *Stall - data cache - *buffers are full. - *This event occurs - *every cycle where - *condition present - */ - IX_PERFPROF_ACC_XSCALE_PMU_EVENT_ONCE, /**< - *Stall - data cache buffers are - *full.This event occurs once - *for each contiguous sequence - */ - IX_PERFPROF_ACC_XSCALE_PMU_EVENT_DATA_CACHE_ACCESS, /**< data cache access*/ - IX_PERFPROF_ACC_XSCALE_PMU_EVENT_DATA_CACHE_MISS, /**< data cache miss*/ - IX_PERFPROF_ACC_XSCALE_PMU_EVENT_DATA_CACHE_WRITEBACK, /**<data cache - *writeback - */ - IX_PERFPROF_ACC_XSCALE_PMU_EVENT_SW_CHANGE_PC, /**< sw change pc*/ - IX_PERFPROF_ACC_XSCALE_PMU_EVENT_MAX /**< max value*/ -} IxPerfProfAccXscalePmuEvent; - -/** - * @ingroup IxPerfProfAcc - * - * @enum IxPerfProfAccStatus - * - * @brief Invalid Status Definitions - * - * These status will be used by the APIs to return to the user. - */ -typedef enum -{ - IX_PERFPROF_ACC_STATUS_SUCCESS = IX_SUCCESS, /**< success*/ - IX_PERFPROF_ACC_STATUS_FAIL = IX_FAIL, /**< fail*/ - IX_PERFPROF_ACC_STATUS_ANOTHER_UTIL_IN_PROGRESS,/**<another utility in - *progress - */ - IX_PERFPROF_ACC_STATUS_XCYCLE_MEASUREMENT_IN_PROGRESS, /**<measurement in - *progress - */ - IX_PERFPROF_ACC_STATUS_XCYCLE_NO_BASELINE, /**<no baseline yet*/ - IX_PERFPROF_ACC_STATUS_XCYCLE_MEASUREMENT_REQUEST_OUT_OF_RANGE, /**< - * Measurement chosen - * is out of range - */ - IX_PERFPROF_ACC_STATUS_XCYCLE_PRIORITY_SET_FAIL, /**< - * Cannot set - * task priority - */ - IX_PERFPROF_ACC_STATUS_XCYCLE_THREAD_CREATE_FAIL, /**< - * Fail create thread - */ - IX_PERFPROF_ACC_STATUS_XCYCLE_PRIORITY_RESTORE_FAIL, /**< - *cannot restore - *priority - */ - IX_PERFPROF_ACC_STATUS_XCYCLE_MEASUREMENT_NOT_RUNNING, /**< xcycle not running*/ - IX_PERFPROF_ACC_STATUS_XSCALE_PMU_NUM_INVALID, /**< invalid number - *entered - */ - IX_PERFPROF_ACC_STATUS_XSCALE_PMU_EVENT_INVALID, /**< invalid pmu event*/ - IX_PERFPROF_ACC_STATUS_XSCALE_PMU_START_NOT_CALLED, /**<a start process - *was not called - *before attempting - *a stop or results - *get - */ - IX_PERFPROF_ACC_STATUS_BUS_PMU_MODE_ERROR, /**< invalid mode*/ - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC1_ERROR, /**< invalid pec1 entered*/ - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC2_ERROR, /**< invalid pec2 entered*/ - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC3_ERROR, /**< invalid pec3 entered*/ - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC4_ERROR, /**< invalid pec4 entered*/ - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC5_ERROR, /**< invalid pec5 entered*/ - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC6_ERROR, /**< invalid pec6 entered*/ - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC7_ERROR, /**< invalid pec7 entered*/ - IX_PERFPROF_ACC_STATUS_BUS_PMU_START_NOT_CALLED, /**<a start process - *was not called - *before attempting - *a stop - */ - IX_PERFPROF_ACC_STATUS_COMPONENT_NOT_SUPPORTED /**<Device or OS does not support component*/ -} IxPerfProfAccStatus; - -/** - * @ingroup IxPerfProfAcc - * - * @enum IxPerfProfAccBusPmuMode - * - * @brief State selection of counters. - * - * These states will be used to determine the counters whose values are to be - * read. - */ -typedef enum -{ - IX_PERFPROF_ACC_BUS_PMU_MODE_HALT=0, /**< halt state*/ - IX_PERFPROF_ACC_BUS_PMU_MODE_SOUTH, /**< south state*/ - IX_PERFPROF_ACC_BUS_PMU_MODE_NORTH, /**< north state*/ - IX_PERFPROF_ACC_BUS_PMU_MODE_SDRAM /**< SDRAM state*/ -} IxPerfProfAccBusPmuMode; - -/* - * Section for prototypes interface functions - */ - -/** - * @ingroup IxPerfProfAcc - * - * @fn ixPerfProfAccXscalePmuEventCountStart( - BOOL clkCntDiv, - UINT32 numEvents, - IxPerfProfAccXscalePmuEvent pmuEvent1, - IxPerfProfAccXscalePmuEvent pmuEvent2, - IxPerfProfAccXscalePmuEvent pmuEvent3, - IxPerfProfAccXscalePmuEvent pmuEvent4 ) - * - * @brief This API will start the clock and event counting - * - * @param clkCntDiv BOOL [in] - enables/disables the clock divider. When - * true, the divider is enabled and the clock count will be incremented - * by one at each 64th processor clock cycle. When false, the divider - * is disabled and the clock count will be incremented at every - * processor clock cycle. - * @param numEvents UINT32 [in] - the number of PMU events that are to be - * monitored as specified by the user. For clock counting only, this - * is set to zero. - * @param pmuEvent1 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU - * event to be monitored by counter 1 - * @param pmuEvent2 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU - * event to be monitored by counter 2 - * @param pmuEvent3 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU - * event to be monitored by counter 3 - * @param pmuEvent4 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU - * event to be monitored by counter 4 - * - * This API will start the clock and xscale PMU event counting. Up to - * 4 events can be monitored simultaneously. This API has to be called before - * ixPerfProfAccXscalePmuEventCountStop can be called. - * - * @return - * - IX_PERFPROF_ACC_STATUS_SUCCESS if clock and events counting are - * started successfully - * - IX_PERFPROF_ACC_STATUS_FAIL if unable to start the counting - * - IX_PERFPROF_ACC_STATUS_XSCALE_PMU_NUM_INVALID if the number of events - * specified is out of the valid range - * - IX_PERFPROF_ACC_STATUS_XSCALE_PMU_EVENT_INVALID if the value of the PMU - * event specified does not exist - * - IX_PERFPROF_ACC_STATUS_ANOTHER_UTIL_IN_PROGRESS - another utility is - * running - * - * @li Reentrant : no - * @li ISR Callable : no - * - */ -PUBLIC IxPerfProfAccStatus -ixPerfProfAccXscalePmuEventCountStart( - BOOL clkCntDiv, - UINT32 numEvents, - IxPerfProfAccXscalePmuEvent pmuEvent1, - IxPerfProfAccXscalePmuEvent pmuEvent2, - IxPerfProfAccXscalePmuEvent pmuEvent3, - IxPerfProfAccXscalePmuEvent pmuEvent4 ); - -/** - * @ingroup IxPerfProfAcc - * - * @fn ixPerfProfAccXscalePmuEventCountStop ( - IxPerfProfAccXscalePmuResults *eventCountStopResults) - * - * @brief This API will stop the clock and event counting - * - * @param *eventCountStopResults @ref IxPerfProfAccXscalePmuResults [out] - pointer - * to struct containing results of counters and their overflow. It is the - * users's responsibility to allocate the memory for this pointer. - * - * This API will stop the clock and xscale PMU events that are being counted. - * The results of the clock and events count will be stored in the pointer - * allocated by the user. It can only be called once - * IxPerfProfAccEventCountStart has been called. - * - * @return - * - IX_PERFPROF_ACC_STATUS_SUCCESS if clock and events counting are - * stopped successfully - * - IX_PERFPROF_ACC_STATUS_XSCALE_PMU_START_NOT_CALLED if - * ixPerfProfAccXscalePmuEventCountStart is not called first. - * - * @li Reentrant : no - * @li ISR Callable : no - * - */ - -PUBLIC IxPerfProfAccStatus -ixPerfProfAccXscalePmuEventCountStop( - IxPerfProfAccXscalePmuResults *eventCountStopResults); - -/** - * @ingroup IxPerfProfAcc - * - * @fn ixPerfProfAccXscalePmuTimeSampStart( - UINT32 samplingRate, - BOOL clkCntDiv) - * - * @brief Starts the time based sampling - * - * @param samplingRate UINT32 [in] - sampling rate is the number of - * clock counts before a counter overflow interrupt is generated, - * at which, a sample is taken; the rate specified cannot be greater - * than the counter size of 32bits or set to zero. - * @param clkCntDiv BOOL [in] - enables/disables the clock divider. When - * true, the divider is enabled and the clock count will be incremented - * by one at each 64th processor clock cycle. When false, the divider - * is disabled and the clock count will be incremented at every - * processor clock cycle. - * - * This API starts the time based sampling to determine the frequency with - * which lines of code are being executed. Sampling is done at the rate - * specified by the user. At each sample,the value of the program counter - * is determined. Each of these occurrences are recorded to determine the - * frequency with which the Xscale code is being executed. This API has to be - * called before ixPerfProfAccXscalePmuTimeSampStop can be called. - * - * @return - * - IX_PERFPROF_ACC_STATUS_SUCCESS if time based sampling is started - * successfully - * - IX_PERFPROF_ACC_STATUS_FAIL if unable to start the sampling - * - IX_PERFPROF_ACC_STATUS_ANOTHER_UTIL_IN_PROGRESS - another utility is - * running - * - * @li Reentrant : no - * @li ISR Callable : no - * - */ -PUBLIC IxPerfProfAccStatus -ixPerfProfAccXscalePmuTimeSampStart( - UINT32 samplingRate, - BOOL clkCntDiv); - -/** - * @ingroup IxPerfProfAcc - * - * @fn ixPerfProfAccXscalePmuTimeSampStop( - IxPerfProfAccXscalePmuEvtCnt *clkCount, - IxPerfProfAccXscalePmuSamplePcProfile *timeProfile) - * - * @brief Stops the time based sampling - * - * @param *clkCount @ref IxPerfProfAccXscalePmuEvtCnt [out] - pointer to the - * struct containing the final clock count and its overflow. It is the - * user's responsibility to allocate the memory for this pointer. - * @param *timeProfile @ref IxPerfProfAccXscalePmuSamplePcProfile [out] - - * pointer to the array of profiles for each program counter value; - * the user should set the size of the array to - * IX_PERFPROF_ACC_XSCALE_PMU_MAX_PROFILE_SAMPLES. It is the user's - * responsibility to allocate the memory for this pointer. - * - * This API stops the time based sampling. The results are stored in the - * pointers allocated by the user. It can only be called once - * ixPerfProfAccXscalePmuTimeSampStart has been called. - * - * @return - * - IX_PERFPROF_ACC_STATUS_SUCCESS if time based sampling is stopped - * successfully - * - IX_PERFPROF_ACC_STATUS_XSCALE_PMU_START_NOT_CALLED if - * ixPerfProfAccXscalePmuTimeSampStart not called first - * - * @li Reentrant : no - * @li ISR Callable : no - * - */ -PUBLIC IxPerfProfAccStatus -ixPerfProfAccXscalePmuTimeSampStop( - IxPerfProfAccXscalePmuEvtCnt *clkCount, - IxPerfProfAccXscalePmuSamplePcProfile *timeProfile); - -/** - * @ingroup IxPerfProfAcc - * - * @fn ixPerfProfAccXscalePmuEventSampStart( - UINT32 numEvents, - IxPerfProfAccXscalePmuEvent pmuEvent1, - UINT32 eventRate1, - IxPerfProfAccXscalePmuEvent pmuEvent2, - UINT32 eventRate2, - IxPerfProfAccXscalePmuEvent pmuEvent3, - UINT32 eventRate3, - IxPerfProfAccXscalePmuEvent pmuEvent4, - UINT32 eventRate4) - * - * @brief Starts the event based sampling - * - * @param numEvents UINT32 [in] - the number of PMU events that are - * to be monitored as specified by the user. The value should be - * between 1-4 events at a time. - * @param pmuEvent1 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU - * event to be monitored by counter 1 - * @param eventRate1 UINT32 [in] - sampling rate of counter 1. The rate is - * the number of events before a sample taken. If 0 is specified, the - * the full counter value (0xFFFFFFFF) is used. The rate must not be - * greater than the full counter value. - * @param pmuEvent2 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU - * event to be monitored by counter 2 - * @param eventRate2 UINT32 [in] - sampling rate of counter 2. The rate is - * the number of events before a sample taken. If 0 is specified, the - * full counter value (0xFFFFFFFF) is used. The rate must not be - * greater than the full counter value. - * @param pmuEvent3 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU - * event to be monitored by counter 3 - * @param eventRate3 UINT32 [in] - sampling rate of counter 3. The rate is - * the number of events before a sample taken. If 0 is specified, the - * full counter value (0xFFFFFFFF) is used. The rate must not be - * greater than the full counter value. - * @param pmuEvent4 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU - * event to be monitored by counter 4 - * @param eventRate4 UINT32 [in] - sampling rate of counter 4. The rate is - * the number of events before a sample taken. If 0 is specified, the - * full counter value (0xFFFFFFFF) is used. The rate must not be - * greater than the full counter value. - * - * Starts the event based sampling to determine the frequency with - * which events are being executed. The sampling rate is the number of events, - * as specified by the user, before a counter overflow interrupt is - * generated. A sample is taken at each counter overflow interrupt. At each - * sample,the value of the program counter determines the corresponding - * location in the code. Each of these occurrences are recorded to determine - * the frequency with which the Xscale code in each event is executed. This API - * has to be called before ixPerfProfAccXscalePmuEventSampStop can be called. - * - * @return - * - IX_PERFPROF_ACC_STATUS_SUCCESS if event based sampling is started - * successfully - * - IX_PERFPROF_ACC_STATUS_FAIL if unable to start the sampling - * - IX_PERFPROF_ACC_STATUS_XSCALE_PMU_NUM_INVALID if the number of events - * specified is out of the valid range - * - IX_PERFPROF_ACC_STATUS_XSCALE_PMU_EVENT_INVALID if the value of the - * PMU event specified does not exist - * - IX_PERFPROF_ACC_STATUS_ANOTHER_UTIL_IN_PROGRESS - another utility is - * running - * - * @li Reentrant : no - * @li ISR Callable : no - * - */ -PUBLIC IxPerfProfAccStatus -ixPerfProfAccXscalePmuEventSampStart( - UINT32 numEvents, - IxPerfProfAccXscalePmuEvent pmuEvent1, - UINT32 eventRate1, - IxPerfProfAccXscalePmuEvent pmuEvent2, - UINT32 eventRate2, - IxPerfProfAccXscalePmuEvent pmuEvent3, - UINT32 eventRate3, - IxPerfProfAccXscalePmuEvent pmuEvent4, - UINT32 eventRate4); - -/** - * @ingroup IxPerfProfAcc - * - * @fn ixPerfProfAccXscalePmuEventSampStop( - IxPerfProfAccXscalePmuSamplePcProfile *eventProfile1, - IxPerfProfAccXscalePmuSamplePcProfile *eventProfile2, - IxPerfProfAccXscalePmuSamplePcProfile *eventProfile3, - IxPerfProfAccXscalePmuSamplePcProfile *eventProfile4) - * - * @brief Stops the event based sampling - * - * @param *eventProfile1 @ref IxPerfProfAccXscalePmuSamplePcProfile [out] - - * pointer to the array of profiles for each program counter value; - * the user should set the size of the array to - * IX_PERFPROF_ACC_XSCALE_PMU_MAX_PROFILE_SAMPLES. It is the - * users's responsibility to allocate memory for this pointer. - * @param *eventProfile2 @ref IxPerfProfAccXscalePmuSamplePcProfile [out] - - * pointer to the array of profiles for each program counter value; - * the user should set the size of the array to - * IX_PERFPROF_ACC_XSCALE_PMU_MAX_PROFILE_SAMPLES. It is the - * users's responsibility to allocate memory for this pointer. - * @param *eventProfile3 @ref IxPerfProfAccXscalePmuSamplePcProfile [out] - - * pointer to the array of profiles for each program counter value; - * the user should set the size of the array to - * IX_PERFPROF_ACC_XSCALE_PMU_MAX_PROFILE_SAMPLES. It is the - * users's responsibility to allocate memory for this pointer. - * @param *eventProfile4 @ref IxPerfProfAccXscalePmuSamplePcProfile [out] - - * pointer to the array of profiles for each program counter value; - * the user should set the size of the array to - * IX_PERFPROF_ACC_XSCALE_PMU_MAX_PROFILE_SAMPLES. It is the - * users's responsibility to allocate memory for this pointer. - * - * This API stops the event based sampling. The results are stored in the - * pointers allocated by the user. It can only be called once - * ixPerfProfAccEventSampStart has been called. - * - * @return - * - IX_PERFPROF_ACC_STATUS_SUCCESS if event based sampling is stopped - * successfully - * - IX_PERFPROF_ACC_STATUS_XSCALE_PMU_START_NOT_CALLED if - * ixPerfProfAccEventSampStart not called first. - * - * @li Reentrant : no - * @li ISR Callable : no - * - */ -PUBLIC IxPerfProfAccStatus -ixPerfProfAccXscalePmuEventSampStop( - IxPerfProfAccXscalePmuSamplePcProfile *eventProfile1, - IxPerfProfAccXscalePmuSamplePcProfile *eventProfile2, - IxPerfProfAccXscalePmuSamplePcProfile *eventProfile3, - IxPerfProfAccXscalePmuSamplePcProfile *eventProfile4); - -/** - * @ingroup IxPerfProfAcc - * - * @fn ixPerfProfAccXscalePmuResultsGet(IxPerfProfAccXscalePmuResults *results) - * - * @brief Reads the current value of the counters and their overflow - * - * @param *results @ref IxPerfProfAccXscalePmuResults [out] - pointer to the - results struct. It is the user's responsibility to allocate memory - for this pointer - * - * This API reads the value of all four event counters and the clock counter, - * and the associated overflows. It does not give results associated with - * sampling, i.e. PC and their frequencies. This API can be called at any time - * once a process has been started. If it is called before a process has started - * the user should be aware that the values it contains are default values and - * might be meaningless. The values of the counters are stored in the pointer - * allocated by the client. - * - * @return - none - * - * @li Reentrant : no - * @li ISR Callable : no - * - */ -PUBLIC void -ixPerfProfAccXscalePmuResultsGet(IxPerfProfAccXscalePmuResults *results); - -/** - * @ingroup IxPerfProfAcc - * - * @fn ixPerfProfAccBusPmuStart( - IxPerfProfAccBusPmuMode mode, - IxPerfProfAccBusPmuEventCounters1 pecEvent1, - IxPerfProfAccBusPmuEventCounters2 pecEvent2, - IxPerfProfAccBusPmuEventCounters3 pecEvent3, - IxPerfProfAccBusPmuEventCounters4 pecEvent4, - IxPerfProfAccBusPmuEventCounters5 pecEvent5, - IxPerfProfAccBusPmuEventCounters6 pecEvent6, - IxPerfProfAccBusPmuEventCounters7 pecEvent7) - * @brief Initializes all the counters and selects events to be monitored. - * - * Function initializes all the counters and assigns the events associated - * with the counters. Users send in the mode and events they want to count. - * This API verifies if the combination chosen is appropriate - * and sets all the registers accordingly. Selecting HALT mode will result - * in an error. User should use ixPerfProfAccBusPmuStop() to HALT. - * - * - * @param mode @ref IxPerfProfAccStateBusPmuMode [in] - Mode selection. - * @param pecEvent1 @ref IxPerfProfAccBusPmuEventCounters1 [in] - Event for PEC1. - * @param pecEvent2 @ref IxPerfProfAccBusPmuEventCounters2 [in] - Event for PEC2. - * @param pecEvent3 @ref IxPerfProfAccBusPmuEventCounters3 [in] - Event for PEC3. - * @param pecEvent4 @ref IxPerfProfAccBusPmuEventCounters4 [in] - Event for PEC4. - * @param pecEvent5 @ref IxPerfProfAccBusPmuEventCounters5 [in] - Event for PEC5. - * @param pecEvent6 @ref IxPerfProfAccBusPmuEventCounters6 [in] - Event for PEC6. - * @param pecEvent7 @ref IxPerfProfAccBusPmuEventCounters7 [in] - Event for PEC7. - * - * @return - * - IX_PERFPROF_ACC_STATUS_SUCCESS - Initialization executed - * successfully. - * - IX_PERFPROF_ACC_STATUS_BUS_PMU_MODE_ERROR - Error in selection of - * mode. Only NORTH, SOUTH and SDRAM modes are allowed. - * - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC1_ERROR - Error in selection of - * event for PEC1 - * - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC2_ERROR - Error in selection of - * event for PEC2 - * - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC3_ERROR - Error in selection of - * event for PEC3 - * - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC4_ERROR - Error in selection of - * event for PEC4 - * - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC5_ERROR - Error in selection of - * event for PEC5 - * - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC6_ERROR - Error in selection of - * event for PEC6 - * - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC7_ERROR - Error in selection of - * event for PEC7 - * - IX_PERFPROF_ACC_STATUS_ANOTHER_UTIL_IN_PROGRESS - another utility - * is running - * - IX_PERFPROF_ACC_STATUS_FAIL - Failed to start because interrupt - * service routine fails to bind. - * - * @li Reentrant : no - * @li ISR Callable : no - * - **/ -PUBLIC -IxPerfProfAccStatus ixPerfProfAccBusPmuStart ( - IxPerfProfAccBusPmuMode mode, - IxPerfProfAccBusPmuEventCounters1 pecEvent1, - IxPerfProfAccBusPmuEventCounters2 pecEvent2, - IxPerfProfAccBusPmuEventCounters3 pecEvent3, - IxPerfProfAccBusPmuEventCounters4 pecEvent4, - IxPerfProfAccBusPmuEventCounters5 pecEvent5, - IxPerfProfAccBusPmuEventCounters6 pecEvent6, - IxPerfProfAccBusPmuEventCounters7 pecEvent7); - -/** - * @ingroup IxPerfProfAcc - * - * @fn ixPerfProfAccBusPmuStop(void) - * @brief Stops all counters. - * - * This function stops all the PECs by setting the halt bit in the ESR. - * - * - * @return - * - IX_PERFPROF_ACC_STATUS_SUCCESS - Counters successfully halted. - * - IX_PERFPROF_ACC_STATUS_FAIL - Counters could'nt be halted. - * - IX_PERFPROF_ACC_STATUS_BUS_PMU_START_NOT_CALLED - the - * ixPerfProfAccBusPmuStart() function is not called. - * - * @li Reentrant : no - * @li ISR Callable : no - * - **/ -PUBLIC IxPerfProfAccStatus -ixPerfProfAccBusPmuStop (void); - -/** - * @ingroup IxPerfProfAcc - * - * @fn ixPerfProfAccBusPmuResultsGet ( - IxPerfProfAccBusPmuResults *busPmuResults) - * @brief Gets values of all counters - * - * This function is responsible for getting all the counter values from the - * lower API and putting it into an array for the user. - * - * @param *busPmuResults @ref IxPerfProfAccBusPmuResults [out] - * - Pointer to a structure of arrays to store all counter values. - * - * @return none - * - * @li Reentrant : no - * @li ISR Callable : no - * - **/ -PUBLIC void -ixPerfProfAccBusPmuResultsGet (IxPerfProfAccBusPmuResults *BusPmuResults); - -/** - * @ingroup IxPerfProfAcc - * - * @fn ixPerfProfAccBusPmuPMSRGet ( - UINT32 *pmsrValue) - * @brief Get values of PMSR - * - * This API gets the Previous Master Slave Register - * value and returns it to the calling function. This value indicates - * which master or slave accessed the north, south bus or sdram last. - * The value returned by this function is a 32 bit value and is read - * from location of an offset 0x0024 of the base value. - * - * The PMSR value returned indicate the following: - * <pre> - * - * ************************************************************************************* - * * Bit * Name * Description * - * * * - * ************************************************************************************* - * * [31:18] *Reserved* * - * ************************************************************************************* - * * [17:12] * PSS * Indicates which of the slaves on * - * * * * ARBS was previously * - * * * * accessed by the AHBS. * - * * * * [000001] Expansion Bus * - * * * * [000010] SDRAM Controller * - * * * * [000100] PCI * - * * * * [001000] Queue Manager * - * * * * [010000] AHB-APB Bridge * - * * * * [100000] Reserved * - * ************************************************************************************* - * * [11:8] * PSN * Indicates which of the Slaves on * - * * * * ARBN was previously * - * * * * accessed the AHBN. * - * * * * [0001] SDRAM Controller * - * * * * [0010] AHB-AHB Bridge * - * * * * [0100] Reserved * - * * * * [1000] Reserved * - * ************************************************************************************* - * * [7:4] * PMS * Indicates which of the Masters on * - * * * * ARBS was previously * - * * * * accessing the AHBS. * - * * * * [0001] Gasket * - * * * * [0010] AHB-AHB Bridge * - * * * * [0100] PCI * - * * * * [1000] APB * - * ************************************************************************************* - * * [3:0] * PMN * Indicates which of the Masters on * - * * * * ARBN was previously * - * * * * accessing the AHBN. * - * * * * [0001] NPEA * - * * * * [0010] NPEB * - * * * * [0100] NPEC * - * * * * [1000] Reserved * - * ************************************************************************************* - * </pre> - * - * @param *pmsrValue UINT32 [out] - Pointer to return PMSR value. Users need to - * allocate storage for psmrValue. - * - * @return none - * - * @li Reentrant : no - * @li ISR Callable : no - * - **/ -PUBLIC void -ixPerfProfAccBusPmuPMSRGet ( -UINT32 *pmsrValue); - - -/** - * The APIs below are specifically used for Xcycle module. - **/ - -/** - * @ingroup IxPerfProfAcc - * - * @fn ixPerfProfAccXcycleBaselineRun ( - UINT32 *numBaselineCycle) - * - * @brief Perform baseline for Xcycle - * - * @param *numBaselineCycle UINT32 [out] - pointer to baseline value after - * calibration. Calling function are responsible for - * allocating memory space for this pointer. - * - * Global Data : - * - None. - * - * This function MUST be run before the Xcycle tool can be used. This - * function must be run immediately when the OS boots up with no other - * addition programs running. - * Addition note : This API will measure the time needed to perform - * a fix amount of CPU instructions (~ 1 second worth of loops) as a - * highest priority task and with interrupt disabled. The time measured - * is known as the baseline - interpreted as the shortest time - * needed to complete the amount of CPU instructions. The baseline is - * returned as unit of time in 66Mhz clock tick. - * - * @return - * - IX_PERFPROF_ACC_STATUS_SUCCESS - successful run, result is returned - * - IX_PERFPROF_ACC_STATUS_XCYCLE_PRIORITY_SET_FAIL - failed to change - * task priority - * - IX_PERFPROF_ACC_STATUS_XCYCLE_PRIORITY_RESTORE_FAIL - failed to - * restore task priority - * - IX_PERFPROF_ACC_STATUS_ANOTHER_UTIL_IN_PROGRESS - another utility - * is running - * - IX_PERFPROF_ACC_STATUS_XCYCLE_MEASUREMENT_IN_PROGRESS - Xcycle - * tool has already started - * - * @li Reentrant : no - * @li ISR Callable : no - * - */ -PUBLIC IxPerfProfAccStatus -ixPerfProfAccXcycleBaselineRun( - UINT32 *numBaselineCycle); - -/** - * @ingroup IxPerfProfAcc - * - * @fn ixPerfProfAccXcycleStart( - UINT32 numMeasurementsRequested); - * - * @brief Start the measurement - * - * @param numMeasurementsRequested UINT32 [in] - number of measurements - * to perform. Value can be 0 to - * IX_PERFPROF_ACC_XCYCLE_MAX_NUM_OF_MEASUREMENTS. - * 0 indicate continuous measurement. - * - * Global Data : - * - None. - * - * - * Start the measurements immediately. - * numMeasurementsRequested specifies number of measurements to run. - * If numMeasurementsRequested is set to 0, the measurement will - * be performed continuously until IxPerfProfAccXcycleStop() - * is called. - * It is estimated that 1 measurement takes approximately 1 second during - * low CPU utilization, therefore 128 measurement takes approximately 128 sec. - * When CPU utilization is high, the measurement will take longer. - * This function spawn a task the perform the measurement and returns. - * The measurement may continue even if this function returns. - * - * IMPORTANT: Under heavy CPU utilization, the task spawn by this - * function may starve and fail to respond to stop command. User - * may need to kill the task manually in this case. - * - * There are only IX_PERFPROF_ACC_XCYCLE_MAX_NUM_OF_MEASUREMENTS - * storage available so storing is wrapped around if measurements are - * more than IX_PERFPROF_ACC_XCYCLE_MAX_NUM_OF_MEASUREMENTS. - * - * - * @return - * - IX_PERFPROF_ACC_STATUS_SUCCESS - successful start, a thread is created - * in the background to perform measurement. - * - IX_PERFPROF_ACC_STATUS_XCYCLE_PRIORITY_SET_FAIL - failed to set - * task priority - * - IX_PERFPROF_ACC_STATUS_XCYCLE_THREAD_CREATE_FAIL - failed to create - * thread to perform measurement. - * - IX_PERFPROF_ACC_STATUS_XCYCLE_NO_BASELINE - baseline is not available - * - IX_PERFPROF_ACC_STATUS_XCYCLE_MEASUREMENT_REQUEST_OUT_OF_RANGE - - * value is larger than IX_PERFPROF_ACC_XCYCLE_MAX_NUM_OF_MEASUREMENTS - * - IX_PERFPROF_ACC_STATUS_XCYCLE_MEASUREMENT_IN_PROGRESS - Xcycle tool - * has already started - * - IX_PERFPROF_ACC_STATUS_ANOTHER_UTIL_IN_PROGRESS - another utility is - * running - * - * @li Reentrant : no - * @li ISR Callable : no - * - */ -PUBLIC IxPerfProfAccStatus -ixPerfProfAccXcycleStart ( - UINT32 numMeasurementsRequested); - -/** - * @ingroup IxPerfProfAcc - * - * @fn ixPerfProfAccXcycleStop(void); - * - * @brief Stop the Xcycle measurement - * - * @param None - * - * Global Data : - * - None. - * - * Stop Xcycle measurements immediately. If the measurements have stopped - * or not started, return IX_PERFPROF_STATUS_XCYCLE_MEASUREMENT_NOT_RUNNING. - * Note: This function does not stop measurement cold. The measurement thread - * may need a few seconds to complete the last measurement. User needs to use - * ixPerfProfAccXcycleInProgress() to determine if measurement is indeed - * completed. - * - * @return - * - IX_PERFPROF_ACC_STATUS_SUCCESS - successful measurement is stopped - * - IX_PERFPROF_STATUS_XCYCLE_MEASUREMENT_NOT_RUNNING - no measurement running - * - * @li Reentrant : no - * @li ISR Callable : no - * - */ -PUBLIC IxPerfProfAccStatus -ixPerfProfAccXcycleStop(void); - -/** - * @ingroup IxPerfProfAcc - * - * @fn ixPerfProfAccXcycleResultsGet( - IxPerfProfAccXcycleResults *xcycleResult ) - * - * @brief Get the results of Xcycle measurement - * - * @param *xcycleResult @ref IxPerfProfAccXcycleResults [out] - Pointer to - * results of last measurements. Calling function are - * responsible for allocating memory space for this pointer. - * - * Global Data : - * - None. - * - * Retrieve the results of last measurement. User should use - * ixPerfProfAccXcycleInProgress() to check if measurement is completed - * before getting the results. - * - * @return - * - IX_PERFPROF_ACC_STATUS_SUCCESS - successful - * - IX_PERFPROF_ACC_STATUS_FAIL - result is not complete. - * - IX_PERFPROF_ACC_STATUS_XCYCLE_NO_BASELINE - baseline is performed - * - IX_PERFPROF_ACC_STATUS_XCYCLE_MEASUREMENT_IN_PROGRESS - Xcycle - * tool is still running - * - * @li Reentrant : no - * @li ISR Callable : no - * - */ -PUBLIC IxPerfProfAccStatus -ixPerfProfAccXcycleResultsGet ( - IxPerfProfAccXcycleResults *xcycleResult); - -/** - * @ingroup IxPerfProfAcc - * - * @fn ixPerfProfAccXcycleInProgress (void) - * - * @brief Check if Xcycle is running - * - * @param None - * Global Data : - * - None. - * - * Check if Xcycle measuring task is running. - * - * @return - * - TRUE - Xcycle is running - * - FALSE - Xcycle is not running - * - * @li Reentrant : no - * @li ISR Callable : no - * - */ -PUBLIC BOOL -ixPerfProfAccXcycleInProgress(void); - -#ifdef __linux -/** - * @ingroup IxPerfProfAcc - * - * @fn ixPerfProfAccXscalePmuTimeSampCreateProcFile - * - * @brief Enables proc file to call module function - * - * @param None - * - * Global Data : - * - None. - * - * This function is declared globally to enable /proc directory system to call - * and execute the function when the registered file is called. This function is not meant to - * be called by the user. - * - * @return - * - Length of data written to file. - * - * @li Reentrant : no - * @li ISR Callable : no - * - */ -int -ixPerfProfAccXscalePmuTimeSampCreateProcFile (char *buf, char **start, off_t offset, - int count, int *eof, void *data); - -/** - * @ingroup IxPerfProfAcc - * - * @fn ixPerfProfAccXscalePmuEventSampCreateProcFile - * - * @brief Enables proc file to call module function - * - * @param None - * - * Global Data : - * - None. - * - * This function is declared globally to enable /proc directory system to call - * and execute the function when the registered file is called. This function is not meant to - * be called by the user. - * - * @return - * - Length of data written to file. - * - * @li Reentrant : no - * @li ISR Callable : no - * - */ -int -ixPerfProfAccXscalePmuEventSampCreateProcFile (char *buf, char **start, off_t offset, - int count, int *eof, void *data); - - -#endif /* ifdef __linux */ - -#endif /* ndef IXPERFPROFACC_H */ - -/** - *@} defgroup IxPerfProfAcc - */ - - |
