diff options
Diffstat (limited to 'cpu/arm920t/start.S')
| -rw-r--r-- | cpu/arm920t/start.S | 93 |
1 files changed, 91 insertions, 2 deletions
diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S index 346f0d09ea..b9c364bc67 100644 --- a/cpu/arm920t/start.S +++ b/cpu/arm920t/start.S @@ -27,7 +27,9 @@ #include <config.h> #include <version.h> - +#if defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF) +#include <led.h> +#endif /* ************************************************************************* @@ -116,6 +118,69 @@ reset: orr r0,r0,#0xd3 msr cpsr,r0 +#if CONFIG_AT91RM9200 +#if defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF) + bl LED_init + bl red_LED_on +#endif + +#ifdef CONFIG_BOOTBINFUNC +/* code based on entry.S from ATMEL */ +#define AT91C_BASE_CKGR 0xFFFFFC20 +#define CKGR_MOR 0 + /* Get the CKGR Base Address */ + ldr r1, =AT91C_BASE_CKGR + +/* Main oscillator Enable register APMC_MOR : Enable main oscillator , OSCOUNT = 0xFF */ +/* ldr r0, = AT91C_CKGR_MOSCEN:OR:AT91C_CKGR_OSCOUNT */ + ldr r0, =0x0000FF01 + str r0, [r1, #CKGR_MOR] + /* Add loop to compensate Main Oscillator startup time */ + ldr r0, =0x00000010 +LoopOsc: + subs r0, r0, #1 + bhi LoopOsc + /* scratch stack */ + ldr r1, =0x00204000 + /* Insure word alignment */ + bic r1, r1, #3 + /* Init stack SYS */ + mov sp, r1 + /* + * This does a lot more than just set up the memory, which + * is why it's called lowlevelinit + */ + bl lowlevelinit /* in memsetup.S */ + bl icache_enable; + /* ------------------------------------ + * Read/modify/write CP15 control register + * ------------------------------------- + * read cp15 control register (cp15 r1) in r0 + * ------------------------------------ + */ + mrc p15, 0, r0, c1, c0, 0 + /* Reset bit :Little Endian end fast bus mode */ + ldr r3, =0xC0000080 + /* Set bit :Asynchronous clock mode, Not Fast Bus */ + ldr r4, =0xC0000000 + bic r0, r0, r3 + orr r0, r0, r4 + /* write r0 in cp15 control register (cp15 r1) */ + mcr p15, 0, r0, c1, c0, 0 +#endif /* CONFIG_BOOTBINFUNC */ + /* + * relocate exeception table + */ + ldr r0, =_start + ldr r1, =0x0 + mov r2, #16 +copyex: + subs r2, r2, #1 + ldr r3, [r0], #4 + str r3, [r1], #4 + bne copyex +#endif + /* turn off the watchdog */ #if defined(CONFIG_S3C2400) # define pWTCON 0x15300000 @@ -160,6 +225,26 @@ reset: bl cpu_init_crit #endif +#ifdef CONFIG_AT91RM9200 +#ifdef CONFIG_BOOTBINFUNC +relocate: /* relocate U-Boot to RAM */ + adr r0, _start /* r0 <- current position of code */ + ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ + cmp r0, r1 /* don't reloc during debug */ + beq stack_setup + + ldr r2, _armboot_start + ldr r3, _bss_start + sub r2, r3, r2 /* r2 <- size of armboot */ + add r2, r0, r2 /* r2 <- source end address */ + +copy_loop: + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end addreee [r2] */ + ble copy_loop +#endif /* CONFIG_BOOTBINFUNC */ +#else #ifndef CONFIG_SKIP_RELOCATE_UBOOT relocate: /* relocate U-Boot to RAM */ adr r0, _start /* r0 <- current position of code */ @@ -178,7 +263,7 @@ copy_loop: cmp r0, r2 /* until source end addreee [r2] */ ble copy_loop #endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - +#endif /* Set up the stack */ stack_setup: ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ @@ -262,7 +347,11 @@ cpu_init_crit: * find a lowlevel_init.S in your board directory. */ mov ip, lr +#if defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF) + +#else bl lowlevel_init +#endif mov lr, ip mov pc, lr #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ |
