summaryrefslogtreecommitdiffstats
path: root/cpu/arm1136/mx31/interrupts.c
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/arm1136/mx31/interrupts.c')
-rw-r--r--cpu/arm1136/mx31/interrupts.c133
1 files changed, 101 insertions, 32 deletions
diff --git a/cpu/arm1136/mx31/interrupts.c b/cpu/arm1136/mx31/interrupts.c
index 21b77a544a..ab7202fef2 100644
--- a/cpu/arm1136/mx31/interrupts.c
+++ b/cpu/arm1136/mx31/interrupts.c
@@ -23,45 +23,123 @@
#include <common.h>
#include <asm/arch/mx31-regs.h>
+#include <div64.h>
#define TIMER_BASE 0x53f90000 /* General purpose timer 1 */
/* General purpose timers registers */
-#define GPTCR __REG(TIMER_BASE) /* Control register */
-#define GPTPR __REG(TIMER_BASE + 0x4) /* Prescaler register */
-#define GPTSR __REG(TIMER_BASE + 0x8) /* Status register */
-#define GPTCNT __REG(TIMER_BASE + 0x24) /* Counter register */
+#define GPTCR __REG(TIMER_BASE) /* Control register */
+#define GPTPR __REG(TIMER_BASE + 0x4) /* Prescaler register */
+#define GPTSR __REG(TIMER_BASE + 0x8) /* Status register */
+#define GPTCNT __REG(TIMER_BASE + 0x24) /* Counter register */
/* General purpose timers bitfields */
-#define GPTCR_SWR (1<<15) /* Software reset */
-#define GPTCR_FRR (1<<9) /* Freerun / restart */
-#define GPTCR_CLKSOURCE_32 (4<<6) /* Clock source */
-#define GPTCR_TEN (1) /* Timer enable */
+#define GPTCR_SWR (1 << 15) /* Software reset */
+#define GPTCR_FRR (1 << 9) /* Freerun / restart */
+#define GPTCR_CLKSOURCE_32 (4 << 6) /* Clock source */
+#define GPTCR_TEN 1 /* Timer enable */
+
+static ulong timestamp;
+static ulong lastinc;
+
+/* "time" is measured in 1 / CONFIG_SYS_HZ seconds, "tick" is internal timer period */
+#ifdef CONFIG_MX31_TIMER_HIGH_PRECISION
+/* ~0.4% error - measured with stop-watch on 100s boot-delay */
+static inline unsigned long long tick_to_time(unsigned long long tick)
+{
+ tick *= CONFIG_SYS_HZ;
+ do_div(tick, CONFIG_MX31_CLK32);
+ return tick;
+}
+
+static inline unsigned long long time_to_tick(unsigned long long time)
+{
+ time *= CONFIG_MX31_CLK32;
+ do_div(time, CONFIG_SYS_HZ);
+ return time;
+}
+
+static inline unsigned long long us_to_tick(unsigned long long us)
+{
+ us = us * CONFIG_MX31_CLK32 + 999999;
+ do_div(us, 1000000);
+ return us;
+}
+#else
+/* ~2% error */
+#define TICK_PER_TIME ((CONFIG_MX31_CLK32 + CONFIG_SYS_HZ / 2) / CONFIG_SYS_HZ)
+#define US_PER_TICK (1000000 / CONFIG_MX31_CLK32)
+
+static inline unsigned long long tick_to_time(unsigned long long tick)
+{
+ do_div(tick, TICK_PER_TIME);
+ return tick;
+}
+
+static inline unsigned long long time_to_tick(unsigned long long time)
+{
+ return time * TICK_PER_TIME;
+}
+
+static inline unsigned long long us_to_tick(unsigned long long us)
+{
+ us += US_PER_TICK - 1;
+ do_div(us, US_PER_TICK);
+ return us;
+}
+#endif
/* nothing really to do with interrupts, just starts up a counter. */
+/* The 32768Hz 32-bit timer overruns in 131072 seconds */
int interrupt_init (void)
{
int i;
/* setup GP Timer 1 */
GPTCR = GPTCR_SWR;
- for ( i=0; i<100; i++) GPTCR = 0; /* We have no udelay by now */
+ for (i = 0; i < 100; i++)
+ GPTCR = 0; /* We have no udelay by now */
GPTPR = 0; /* 32Khz */
- GPTCR |= GPTCR_CLKSOURCE_32 | GPTCR_TEN; /* Freerun Mode, PERCLK1 input */
+ /* Freerun Mode, PERCLK1 input */
+ GPTCR |= GPTCR_CLKSOURCE_32 | GPTCR_TEN;
return 0;
}
void reset_timer_masked (void)
{
- GPTCR = 0;
- GPTCR = GPTCR_CLKSOURCE_32 | GPTCR_TEN; /* Freerun Mode, PERCLK1 input */
+ /* reset time */
+ lastinc = GPTCNT; /* capture current incrementer value time */
+ timestamp = 0; /* start "advancing" time stamp from 0 */
+}
+
+void reset_timer(void)
+{
+ reset_timer_masked();
+}
+
+unsigned long long get_ticks (void)
+{
+ ulong now = GPTCNT; /* current tick value */
+
+ if (now >= lastinc) /* normal mode (non roll) */
+ /* move stamp forward with absolut diff ticks */
+ timestamp += (now - lastinc);
+ else /* we have rollover of incrementer */
+ timestamp += (0xFFFFFFFF - lastinc) + now;
+ lastinc = now;
+ return timestamp;
}
ulong get_timer_masked (void)
{
- ulong val = GPTCNT;
- return val;
+ /*
+ * get_ticks() returns a long long (64 bit), it wraps in
+ * 2^64 / CONFIG_MX31_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~
+ * 5 * 10^9 days... and get_ticks() * CONFIG_SYS_HZ wraps in
+ * 5 * 10^6 days - long enough.
+ */
+ return tick_to_time(get_ticks());
}
ulong get_timer (ulong base)
@@ -71,29 +149,20 @@ ulong get_timer (ulong base)
void set_timer (ulong t)
{
+ timestamp = time_to_tick(t);
}
/* delay x useconds AND perserve advance timstamp value */
void udelay (unsigned long usec)
{
- ulong tmo, tmp;
-
- if (usec >= 1000) { /* if "big" number, spread normalization to seconds */
- tmo = usec / 1000; /* start to normalize for usec to ticks per sec */
- tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */
- tmo /= 1000; /* finish normalize. */
- } else { /* else small number, don't kill it prior to HZ multiply */
- tmo = usec * CFG_HZ;
- tmo /= (1000*1000);
- }
-
- tmp = get_timer (0); /* get current timestamp */
- if ( (tmo + tmp + 1) < tmp )/* if setting this forward will roll time stamp */
- reset_timer_masked (); /* reset "advancing" timestamp to 0, set lastinc value */
- else
- tmo += tmp; /* else, set advancing stamp wake up time */
- while (get_timer_masked () < tmo)/* loop till event */
- /*NOP*/;
+ unsigned long long tmp;
+ ulong tmo;
+
+ tmo = us_to_tick(usec);
+ tmp = get_ticks() + tmo; /* get current timestamp */
+
+ while (get_ticks() < tmp) /* loop till event */
+ /*NOP*/;
}
void reset_cpu (ulong addr)
OpenPOWER on IntegriCloud