diff options
Diffstat (limited to 'board/sc520_spunk')
| -rw-r--r-- | board/sc520_spunk/Makefile | 2 | ||||
| -rw-r--r-- | board/sc520_spunk/flash.c | 316 | ||||
| -rw-r--r-- | board/sc520_spunk/sc520_spunk.c | 347 | ||||
| -rw-r--r-- | board/sc520_spunk/sc520_spunk_asm.S | 23 | ||||
| -rw-r--r-- | board/sc520_spunk/sc520_spunk_asm16.S | 47 | ||||
| -rw-r--r-- | board/sc520_spunk/u-boot.lds | 58 |
6 files changed, 394 insertions, 399 deletions
diff --git a/board/sc520_spunk/Makefile b/board/sc520_spunk/Makefile index 53217c380e..242d53c42a 100644 --- a/board/sc520_spunk/Makefile +++ b/board/sc520_spunk/Makefile @@ -29,7 +29,7 @@ OBJS := sc520_spunk.o flash.o SOBJS := sc520_spunk_asm.o sc520_spunk_asm16.o $(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $^ + $(AR) crv $@ $(OBJS) clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/sc520_spunk/flash.c b/board/sc520_spunk/flash.c index 66ef720660..d97dc21865 100644 --- a/board/sc520_spunk/flash.c +++ b/board/sc520_spunk/flash.c @@ -1,7 +1,7 @@ /* * (C) Copyright 2002, 2003 * Daniel Engström, Omicron Ceti AB, daniel@omicron.se - * + * * (C) Copyright 2002 * Sysgo Real-Time Solutions, GmbH <www.elinos.com> * Alex Zuepke <azu@sysgo.de> @@ -66,122 +66,121 @@ flash_info_t flash_info[SC520_MAX_FLASH_BANKS]; static u32 _probe_flash(u32 addr, u32 bw, int il) { u32 result=0; - + /* First do an unlock cycle for the benefit of * devices that need it */ - + switch (bw) { - + case 1: *(volatile u8*)(addr+0x5555) = 0xaa; *(volatile u8*)(addr+0x2aaa) = 0x55; *(volatile u8*)(addr+0x5555) = 0x90; - + /* Read vendor */ result = *(volatile u8*)addr; result <<= 16; - + /* Read device */ result |= *(volatile u8*)(addr+2); - + /* Return device to data mode */ *(volatile u8*)addr = 0xff; - *(volatile u8*)(addr+0x5555), 0xf0; + *(volatile u8*)(addr+0x5555), 0xf0; break; - + case 2: *(volatile u16*)(addr+0xaaaa) = 0xaaaa; *(volatile u16*)(addr+0x5554) = 0x5555; - + /* Issue identification command */ if (il == 2) { *(volatile u16*)(addr+0xaaaa) = 0x9090; - + /* Read vendor */ result = *(volatile u8*)addr; result <<= 16; - + /* Read device */ result |= *(volatile u8*)(addr+2); - + /* Return device to data mode */ *(volatile u16*)addr = 0xffff; - *(volatile u16*)(addr+0xaaaa), 0xf0f0; - + *(volatile u16*)(addr+0xaaaa), 0xf0f0; + } else { *(volatile u8*)(addr+0xaaaa) = 0x90; /* Read vendor */ result = *(volatile u16*)addr; result <<= 16; - + /* Read device */ result |= *(volatile u16*)(addr+2); - + /* Return device to data mode */ *(volatile u8*)addr = 0xff; - *(volatile u8*)(addr+0xaaaa), 0xf0; + *(volatile u8*)(addr+0xaaaa), 0xf0; } - + break; - + case 4: *(volatile u32*)(addr+0x5554) = 0xaaaaaaaa; *(volatile u32*)(addr+0xaaa8) = 0x55555555; - + switch (il) { case 1: /* Issue identification command */ *(volatile u8*)(addr+0x5554) = 0x90; - + /* Read vendor */ result = *(volatile u16*)addr; result <<= 16; - + /* Read device */ result |= *(volatile u16*)(addr+4); - + /* Return device to data mode */ *(volatile u8*)addr = 0xff; - *(volatile u8*)(addr+0x5554), 0xf0; + *(volatile u8*)(addr+0x5554), 0xf0; break; - + case 2: /* Issue identification command */ *(volatile u32*)(addr + 0x5554) = 0x00900090; - + /* Read vendor */ result = *(volatile u16*)addr; result <<= 16; - + /* Read device */ result |= *(volatile u16*)(addr+4); - + /* Return device to data mode */ *(volatile u32*)addr = 0x00ff00ff; - *(volatile u32*)(addr+0x5554), 0x00f000f0; + *(volatile u32*)(addr+0x5554), 0x00f000f0; break; - + case 4: /* Issue identification command */ *(volatile u32*)(addr+0x5554) = 0x90909090; - + /* Read vendor */ result = *(volatile u8*)addr; result <<= 16; - + /* Read device */ result |= *(volatile u8*)(addr+4); - + /* Return device to data mode */ *(volatile u32*)addr = 0xffffffff; - *(volatile u32*)(addr+0x5554), 0xf0f0f0f0; + *(volatile u32*)(addr+0x5554), 0xf0f0f0f0; break; } break; } - - - + + return result; } @@ -191,36 +190,36 @@ asm ("_probe_flash_end:\n" static int identify_flash(unsigned address, int width) { - int is; + int is; int device; - int vendor; + int vendor; int size; unsigned res; - + u32 (*_probe_flash_ptr)(u32 a, u32 bw, int il); - - size = (unsigned)&_probe_flash_end - (unsigned)_probe_flash; - + + size = (unsigned)&_probe_flash_end - (unsigned)_probe_flash; + if (size > PROBE_BUFFER_SIZE) { printf("_probe_flash() routine too large (%d) %p - %p\n", size, &_probe_flash_end, _probe_flash); return 0; } - + memcpy(buffer, _probe_flash, size); _probe_flash_ptr = (void*)buffer; - + is = disable_interrupts(); res = _probe_flash_ptr(address, width, 1); if (is) { enable_interrupts(); } - - - vendor = res >> 16; + + + vendor = res >> 16; device = res & 0xffff; - - + + return res; } @@ -228,12 +227,12 @@ ulong flash_init(void) { int i, j; ulong size = 0; - + for (i = 0; i < SC520_MAX_FLASH_BANKS; i++) { unsigned id; ulong flashbase = 0; - int sectsize = 0; - + int sectsize = 0; + memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); switch (i) { case 0: @@ -242,7 +241,7 @@ ulong flash_init(void) default: panic("configured to many flash banks!\n"); } - + id = identify_flash(flashbase, 2); switch (id) { case 0x000122d7: @@ -250,78 +249,78 @@ ulong flash_init(void) flash_info[i].flash_id = (AMD_MANUFACT & FLASH_VENDMASK) | (AMD_ID_LV640U & FLASH_TYPEMASK); - + flash_info[i].size = A29LV641DH_SIZE; flash_info[i].sector_count = A29LV641DH_SECTORS; sectsize = A29LV641DH_SIZE/A29LV641DH_SECTORS; printf("Bank %d: AMD 29LV641DH\n", i); break; - + case 0x0001227E: /* 29LV641MH */ flash_info[i].flash_id = (AMD_MANUFACT & FLASH_VENDMASK) | (AMD_ID_DL640 & FLASH_TYPEMASK); - + flash_info[i].size = A29LV641MH_SIZE; flash_info[i].sector_count = A29LV641MH_SECTORS; sectsize = A29LV641MH_SIZE/A29LV641MH_SECTORS; printf("Bank %d: AMD 29LV641MH\n", i); break; - + case 0x00890016: /* 28F320J3A */ flash_info[i].flash_id = (INTEL_MANUFACT & FLASH_VENDMASK) | (INTEL_ID_28F320J3A & FLASH_TYPEMASK); - + flash_info[i].size = I28F320J3A_SIZE; flash_info[i].sector_count = I28F320J3A_SECTORS; sectsize = I28F320J3A_SIZE/I28F320J3A_SECTORS; printf("Bank %d: Intel 28F320J3A\n", i); break; - + case 0x00890017: /* 28F640J3A */ flash_info[i].flash_id = (INTEL_MANUFACT & FLASH_VENDMASK) | (INTEL_ID_28F640J3A & FLASH_TYPEMASK); - + flash_info[i].size = I28F640J3A_SIZE; flash_info[i].sector_count = I28F640J3A_SECTORS; sectsize = I28F640J3A_SIZE/I28F640J3A_SECTORS; printf("Bank %d: Intel 28F640J3A\n", i); break; - + case 0x00890018: /* 28F128J3A */ flash_info[i].flash_id = (INTEL_MANUFACT & FLASH_VENDMASK) | (INTEL_ID_28F128J3A & FLASH_TYPEMASK); - + flash_info[i].size = I28F128J3A_SIZE; flash_info[i].sector_count = I28F128J3A_SECTORS; sectsize = I28F128J3A_SIZE/I28F128J3A_SECTORS; printf("Bank %d: Intel 28F128J3A\n", i); break; - + default: printf("Bank %d have unknown flash %08x\n", i, id); flash_info[i].flash_id = FLASH_UNKNOWN; continue; } - + for (j = 0; j < flash_info[i].sector_count; j++) { flash_info[i].start[j] = flashbase + j * sectsize; } size += flash_info[i].size; - + flash_protect(FLAG_PROTECT_CLEAR, flash_info[i].start[0], flash_info[i].start[0] + flash_info[i].size - 1, &flash_info[i]); } - + /* * Protect monitor and environment sectors */ @@ -334,7 +333,7 @@ ulong flash_init(void) CFG_ENV_ADDR, CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]); -#endif +#endif return size; } @@ -343,7 +342,7 @@ ulong flash_init(void) void flash_print_info(flash_info_t *info) { int i; - + switch (info->flash_id & FLASH_VENDMASK) { case (INTEL_MANUFACT & FLASH_VENDMASK): printf("INTEL: "); @@ -362,9 +361,9 @@ void flash_print_info(flash_info_t *info) goto done; break; } - + break; - + case (AMD_MANUFACT & FLASH_VENDMASK): printf("AMD: "); switch (info->flash_id & FLASH_TYPEMASK) { @@ -379,17 +378,17 @@ void flash_print_info(flash_info_t *info) goto done; break; } - + break; default: printf("Unknown Vendor "); break; } - - + + printf(" Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count); - + printf(" Sector Start Addresses:"); for (i = 0; i < info->sector_count; i++) { if ((i % 5) == 0) { @@ -399,7 +398,7 @@ void flash_print_info(flash_info_t *info) info->protect[i] ? " (RO)" : " "); } printf ("\n"); - + done: } @@ -410,7 +409,7 @@ void flash_print_info(flash_info_t *info) static u32 _amd_erase_flash(u32 addr, u32 sector) { unsigned elapsed; - + /* Issue erase */ *(volatile u16*)(addr + 0xaaaa) = 0x00AA; *(volatile u16*)(addr + 0x5554) = 0x0055; @@ -420,20 +419,20 @@ static u32 _amd_erase_flash(u32 addr, u32 sector) *(volatile u16*)(addr + 0x5554) = 0x0055; /* Sector erase command comes last */ *(volatile u16*)(addr + sector) = 0x0030; - + elapsed = *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); /* dummy read */ elapsed = 0; while (((*(volatile u16*)(addr + sector)) & 0x0080) != 0x0080) { - + elapsed += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); if (elapsed > ((CFG_FLASH_ERASE_TOUT/CFG_HZ) * 1000)) { *(volatile u16*)(addr) = 0x00f0; - return 1; + return 1; } } - + *(volatile u16*)(addr) = 0x00f0; - + return 0; } @@ -448,7 +447,7 @@ asm ("_amd_erase_flash_end:\n" unsigned milli=0; \ \ micro = *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); \ - \ + \ for (;;) { \ \ milli += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); \ @@ -458,32 +457,32 @@ asm ("_amd_erase_flash_end:\n" break; \ } \ } \ -} while (0) +} while (0) static u32 _intel_erase_flash(u32 addr, u32 sector) -{ +{ unsigned elapsed; - + *(volatile u16*)(addr + sector) = 0x0050; /* clear status register */ *(volatile u16*)(addr + sector) = 0x0020; /* erase setup */ *(volatile u16*)(addr + sector) = 0x00D0; /* erase confirm */ - + /* Wait at least 80us - let's wait 1 ms */ __udelay(1000); - + elapsed = 0; while (((*(volatile u16*)(addr + sector)) & 0x0080) != 0x0080) { elapsed += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); if (elapsed > ((CFG_FLASH_ERASE_TOUT/CFG_HZ) * 1000)) { *(volatile u16*)(addr + sector) = 0x00B0; /* suspend erase */ *(volatile u16*)(addr + sector) = 0x00FF; /* reset to read mode */ - return 1; + return 1; } } - + *(volatile u16*)(addr + sector) = 0x00FF; /* reset to read mode */ - + return 0; } @@ -498,7 +497,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last) int prot; int sect; unsigned size; - + if ((s_first < 0) || (s_first > s_last)) { if (info->flash_id == FLASH_UNKNOWN) { printf("- missing\n"); @@ -507,77 +506,77 @@ int flash_erase(flash_info_t *info, int s_first, int s_last) } return 1; } - + if ((info->flash_id & FLASH_VENDMASK) == (AMD_MANUFACT & FLASH_VENDMASK)) { - size = (unsigned)&_amd_erase_flash_end - (unsigned)_amd_erase_flash; - + size = (unsigned)&_amd_erase_flash_end - (unsigned)_amd_erase_flash; + if (size > PROBE_BUFFER_SIZE) { printf("_amd_erase_flash() routine too large (%d) %p - %p\n", size, &_amd_erase_flash_end, _amd_erase_flash); return 0; } - + memcpy(buffer, _amd_erase_flash, size); _erase_flash_ptr = (void*)buffer; - + } else if ((info->flash_id & FLASH_VENDMASK) == (INTEL_MANUFACT & FLASH_VENDMASK)) { - size = (unsigned)&_intel_erase_flash_end - (unsigned)_intel_erase_flash; - + size = (unsigned)&_intel_erase_flash_end - (unsigned)_intel_erase_flash; + if (size > PROBE_BUFFER_SIZE) { printf("_intel_erase_flash() routine too large (%d) %p - %p\n", size, &_intel_erase_flash_end, _intel_erase_flash); return 0; } - + memcpy(buffer, _intel_erase_flash, size); _erase_flash_ptr = (void*)buffer; } else { printf ("Can't erase unknown flash type - aborted\n"); return 1; } - + prot = 0; for (sect=s_first; sect<=s_last; ++sect) { if (info->protect[sect]) { prot++; } } - + if (prot) { printf ("- Warning: %d protected sectors will not be erased!\n", prot); } else { printf ("\n"); } - - + + /* Start erase on unprotected sectors */ for (sect = s_first; sect<=s_last; sect++) { - + if (info->protect[sect] == 0) { /* not protected */ int res; int flag; - + /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts(); - + res = _erase_flash_ptr(info->start[0], info->start[sect]-info->start[0]); - + /* re-enable interrupts if necessary */ if (flag) { enable_interrupts(); } - - + + if (res) { printf("Erase timed out, sector %d\n", sect); return res; } - - putc('.'); - } + + putc('.'); + } } - + return 0; } @@ -594,36 +593,36 @@ static int _amd_write_word(unsigned start, unsigned dest, unsigned data) volatile u16 *data2 = (u16*)&data; int i; unsigned elapsed; - + /* Check if Flash is (sufficiently) erased */ if ((*((volatile u16*)dest) & (u16)data) != (u16)data) { return 2; } - + for (i = 0; i < 2; i++) { - - + + addr2[0x5555] = 0x00AA; addr2[0x2aaa] = 0x0055; addr2[0x5555] = 0x00A0; - + dest2[i] = (data >> (i*16)) & 0xffff; - + elapsed = *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); /* dummy read */ elapsed = 0; - + /* data polling for D7 */ while ((dest2[i] & 0x0080) != (data2[i] & 0x0080)) { elapsed += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); if (elapsed > ((CFG_FLASH_WRITE_TOUT/CFG_HZ) * 1000)) { addr2[i] = 0x00f0; - return 1; + return 1; } } } - + addr2[i] = 0x00f0; - + return 0; } @@ -632,38 +631,37 @@ asm ("_amd_write_word_end:\n" ".long 0\n"); - static int _intel_write_word(unsigned start, unsigned dest, unsigned data) { int i; unsigned elapsed; - + /* Check if Flash is (sufficiently) erased */ if ((*((volatile u16*)dest) & (u16)data) != (u16)data) { return 2; } - + for (i = 0; i < 2; i++) { - - *(volatile u16*)(dest+2*i) = 0x0040; /* write setup */ + + *(volatile u16*)(dest+2*i) = 0x0040; /* write setup */ *(volatile u16*)(dest+2*i) = (data >> (i*16)) & 0xffff; - + elapsed = *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); /* dummy read */ elapsed = 0; - + /* data polling for D7 */ while ((*(volatile u16*)dest & 0x0080) != 0x0080) { elapsed += *(volatile u16*)(0xfffef000+SC520_SWTMRMILLI); if (elapsed > ((CFG_FLASH_WRITE_TOUT/CFG_HZ) * 1000)) { *(volatile u16*)dest = 0x00ff; - return 1; + return 1; } } } - + *(volatile u16*)dest = 0x00ff; - - + + return 0; } @@ -688,28 +686,28 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt) int flag; u32 (*_write_word_ptr)(unsigned start, unsigned dest, unsigned data); unsigned size; - + if ((info->flash_id & FLASH_VENDMASK) == (AMD_MANUFACT & FLASH_VENDMASK)) { - size = (unsigned)&_amd_write_word_end - (unsigned)_amd_write_word; - + size = (unsigned)&_amd_write_word_end - (unsigned)_amd_write_word; + if (size > PROBE_BUFFER_SIZE) { printf("_amd_write_word() routine too large (%d) %p - %p\n", size, &_amd_write_word_end, _amd_write_word); return 0; } - + memcpy(buffer, _amd_write_word, size); _write_word_ptr = (void*)buffer; - + } else if ((info->flash_id & FLASH_VENDMASK) == (INTEL_MANUFACT & FLASH_VENDMASK)) { - size = (unsigned)&_intel_write_word_end - (unsigned)_intel_write_word; - + size = (unsigned)&_intel_write_word_end - (unsigned)_intel_write_word; + if (size > PROBE_BUFFER_SIZE) { printf("_intel_write_word() routine too large (%d) %p - %p\n", size, &_intel_write_word_end, _intel_write_word); return 0; } - + memcpy(buffer, _intel_write_word, size); _write_word_ptr = (void*)buffer; } else { @@ -719,7 +717,7 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt) wp = (addr & ~3); /* get lower word aligned address */ - + /* * handle unaligned start bytes @@ -737,12 +735,12 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt) for (; cnt==0 && i<4; ++i, ++cp) { data |= (*(uchar *)cp) << (8*i); } - + /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts(); - + rc = _write_word_ptr(info->start[0], wp, data); - + /* re-enable interrupts if necessary */ if (flag) { enable_interrupts(); @@ -752,22 +750,22 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt) } wp += 4; } - + /* * handle word aligned part */ while (cnt >= 4) { data = 0; - + for (i=0; i<4; ++i) { data |= *src++ << (8*i); } - + /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts(); rc = _write_word_ptr(info->start[0], wp, data); - + /* re-enable interrupts if necessary */ if (flag) { enable_interrupts(); @@ -778,11 +776,11 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt) wp += 4; cnt -= 4; } - + if (cnt == 0) { return 0; } - + /* * handle unaligned tail bytes */ @@ -791,7 +789,7 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt) data |= *src++ << (8*i); --cnt; } - + for (; i<4; ++i, ++cp) { data |= (*(uchar *)cp) << (8*i); } @@ -800,14 +798,12 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt) flag = disable_interrupts(); rc = _write_word_ptr(info->start[0], wp, data); - + /* re-enable interrupts if necessary */ if (flag) { enable_interrupts(); } - - return rc; - -} + return rc; +} diff --git a/board/sc520_spunk/sc520_spunk.c b/board/sc520_spunk/sc520_spunk.c index 962e04e441..e7a7d5188c 100644 --- a/board/sc520_spunk/sc520_spunk.c +++ b/board/sc520_spunk/sc520_spunk.c @@ -1,5 +1,5 @@ /* - * + * * (C) Copyright 2002 * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>. * @@ -32,11 +32,11 @@ /* ------------------------------------------------------------------------- */ - -/* + +/* * Theory: * We first set up all IRQs to be non-pci, edge triggered, - * when we later enumerate the pci bus and pci_sc520_fixup_irq() gets + * when we later enumerate the pci bus and pci_sc520_fixup_irq() gets * called we reallocate irqs to the pci bus with sc520_pci_set_irq() * as needed. Whe choose the irqs to gram from a configurable list * inside pci_sc520_fixup_irq() (If this list contains stupid irq's @@ -46,42 +46,42 @@ static void irq_init(void) { /* disable global interrupt mode */ - write_mmcr_byte(SC520_PICICR, 0x40); - + write_mmcr_byte(SC520_PICICR, 0x40); + /* set all irqs to edge */ write_mmcr_byte(SC520_MPICMODE, 0x00); write_mmcr_byte(SC520_SL1PICMODE, 0x00); write_mmcr_byte(SC520_SL2PICMODE, 0x00); - - /* active low polarity on PIC interrupt pins, + + /* active low polarity on PIC interrupt pins, * active high polarity on all other irq pins */ write_mmcr_word(SC520_INTPINPOL, 0x0000); /* set irq number mapping */ - write_mmcr_byte(SC520_GPTMR0MAP, SC520_IRQ_DISABLED); /* disable GP timer 0 INT */ + write_mmcr_byte(SC520_GPTMR0MAP, SC520_IRQ_DISABLED); /* disable GP timer 0 INT */ write_mmcr_byte(SC520_GPTMR1MAP, SC520_IRQ_DISABLED); /* disable GP timer 1 INT */ write_mmcr_byte(SC520_GPTMR2MAP, SC520_IRQ_DISABLED); /* disable GP timer 2 INT */ - write_mmcr_byte(SC520_PIT0MAP, SC520_IRQ0); /* Set PIT timer 0 INT to IRQ0 */ + write_mmcr_byte(SC520_PIT0MAP, SC520_IRQ0); /* Set PIT timer 0 INT to IRQ0 */ write_mmcr_byte(SC520_PIT1MAP, SC520_IRQ_DISABLED); /* disable PIT timer 1 INT */ write_mmcr_byte(SC520_PIT2MAP, SC520_IRQ_DISABLED); /* disable PIT timer 2 INT */ write_mmcr_byte(SC520_PCIINTAMAP, SC520_IRQ_DISABLED); /* disable PCI INT A */ write_mmcr_byte(SC520_PCIINTBMAP, SC520_IRQ_DISABLED); /* disable PCI INT B */ write_mmcr_byte(SC520_PCIINTCMAP, SC520_IRQ_DISABLED); /* disable PCI INT C */ write_mmcr_byte(SC520_PCIINTDMAP, SC520_IRQ_DISABLED); /* disable PCI INT D */ - write_mmcr_byte(SC520_DMABCINTMAP, SC520_IRQ_DISABLED); /* disable DMA INT */ + write_mmcr_byte(SC520_DMABCINTMAP, SC520_IRQ_DISABLED); /* disable DMA INT */ write_mmcr_byte(SC520_SSIMAP, SC520_IRQ6); /* Set Synchronius serial INT to IRQ6*/ write_mmcr_byte(SC520_WDTMAP, SC520_IRQ_DISABLED); /* disable Watchdog INT */ write_mmcr_byte(SC520_RTCMAP, SC520_IRQ8); /* Set RTC int to 8 */ write_mmcr_byte(SC520_WPVMAP, SC520_IRQ_DISABLED); /* disable write protect INT */ write_mmcr_byte(SC520_ICEMAP, SC520_IRQ1); /* Set ICE Debug Serielport INT to IRQ1 */ write_mmcr_byte(SC520_FERRMAP,SC520_IRQ13); /* Set FP error INT to IRQ13 */ - + write_mmcr_byte(SC520_UART1MAP, SC520_IRQ4); /* Set internal UART2 INT to IRQ4 */ write_mmcr_byte(SC520_UART2MAP, SC520_IRQ3); /* Set internal UART2 INT to IRQ3 */ - + write_mmcr_byte(SC520_GP0IMAP, SC520_IRQ7); /* Set GPIRQ0 (PC-Card AUX IRQ) to IRQ7 */ write_mmcr_byte(SC520_GP1IMAP, SC520_IRQ14); /* Set GPIRQ1 (CF IRQ) to IRQ14 */ - write_mmcr_byte(SC520_GP3IMAP, SC520_IRQ5); /* Set GPIRQ3 ( CAN IRQ ) ti IRQ5 */ + write_mmcr_byte(SC520_GP3IMAP, SC520_IRQ5); /* Set GPIRQ3 ( CAN IRQ ) ti IRQ5 */ write_mmcr_byte(SC520_GP4IMAP, SC520_IRQ_DISABLED); /* disbale GIRQ4 ( IRR IRQ ) */ write_mmcr_byte(SC520_GP5IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ5 */ write_mmcr_byte(SC520_GP6IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ6 */ @@ -89,19 +89,19 @@ static void irq_init(void) write_mmcr_byte(SC520_GP8IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ8 */ write_mmcr_byte(SC520_GP9IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ9 */ write_mmcr_byte(SC520_GP2IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ2 */ - write_mmcr_byte(SC520_GP10IMAP,SC520_IRQ_DISABLED); /* disable GPIRQ10 */ - + write_mmcr_byte(SC520_GP10IMAP,SC520_IRQ_DISABLED); /* disable GPIRQ10 */ + write_mmcr_word(SC520_PCIHOSTMAP, 0x11f); /* Map PCI hostbridge INT to NMI */ write_mmcr_word(SC520_ECCMAP, 0x100); /* Map SDRAM ECC failure INT to NMI */ - + } - + /* PCI stuff */ static void pci_sc520_spunk_fixup_irq(struct pci_controller *hose, pci_dev_t dev) { int version = read_mmcr_byte(SC520_SYSINFO); - + /* a configurable lists of irqs to steal * when we need one (a board with more pci interrupt pins * would use a larger table */ @@ -112,84 +112,83 @@ static void pci_sc520_spunk_fixup_irq(struct pci_controller *hose, pci_dev_t dev CFG_FORTH_PCI_IRQ }; static int next_irq_index=0; - - char tmp_pin; + + char tmp_pin; int pin; - + pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &tmp_pin); pin = tmp_pin; - + pin-=1; /* pci config space use 1-based numbering */ if (-1 == pin) { return; /* device use no irq */ } - - - + + /* map device number + pin to a pin on the sc520 */ switch (PCI_DEV(dev)) { - case 6: /* ETH0 */ + case 6: /* ETH0 */ pin+=SC520_PCI_INTA; break; - + case 7: /* ETH1 */ pin+=SC520_PCI_INTB; break; - + case 8: /* Crypto */ pin+=SC520_PCI_INTC; break; - + case 9: /* PMC slot */ pin+=SC520_PCI_INTD; break; - + case 10: /* PC-Card */ - - if (version < 10) { + + if (version < 10) { pin+=SC520_PCI_INTD; } else { pin+=SC520_PCI_INTC; } break; - - default: + + default: return; } - + pin&=3; /* wrap around */ - + if (sc520_pci_ints[pin] == -1) { - /* re-route one interrupt for us */ + /* re-route one interrupt for us */ if (next_irq_index > 3) { return; } - if (pci_sc520_set_irq(pin, irq_list[next_irq_index])) { + if (pci_sc520_set_irq(pin, irq_list[next_irq_index])) { return; } next_irq_index++; } - + if (-1 != sc520_pci_ints[pin]) { - pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, + pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, sc520_pci_ints[pin]); } -#if 0 - printf("fixup_irq: device %d pin %c irq %d\n", +#if 0 + printf("fixup_irq: device %d pin %c irq %d\n", PCI_DEV(dev), 'A' + pin, sc520_pci_ints[pin]); #endif } -static void pci_sc520_spunk_configure_cardbus(struct pci_controller *hose, +static void pci_sc520_spunk_configure_cardbus(struct pci_controller *hose, pci_dev_t dev, struct pci_config_table *te) { u32 io_base; u32 temp; - + pciauto_config_device(hose, dev); - + pci_hose_write_config_word(hose, dev, PCI_COMMAND, 0x07); /* enable device */ pci_hose_write_config_byte(hose, dev, 0x0c, 0x10); /* cacheline size */ pci_hose_write_config_byte(hose, dev, 0x0d, 0x40); /* latency timer */ @@ -197,15 +196,15 @@ static void pci_sc520_spunk_configure_cardbus(struct pci_controller *hose, pci_hose_write_config_word(hose, dev, PCI_BRIDGE_CONTROL, 0x0040); /* reset cardbus */ pci_hose_write_config_word(hose, dev, PCI_BRIDGE_CONTROL, 0x0080); /* route interrupts though ExCA */ pci_hose_write_config_word(hose, dev, 0x44, 0x3e0); /* map legacy I/O port to 0x3e0 */ - - pci_hose_read_config_dword(hose, dev, 0x80, &temp); /* System control */ - pci_hose_write_config_dword(hose, dev, 0x80, temp | 0x60); /* System control: disable clockrun */ - /* route MF0 to ~INT and MF3 to IRQ7 + + pci_hose_read_config_dword(hose, dev, 0x80, &temp); /* System control */ + pci_hose_write_config_dword(hose, dev, 0x80, temp | 0x60); /* System control: disable clockrun */ + /* route MF0 to ~INT and MF3 to IRQ7 * reserve all others */ - pci_hose_write_config_dword(hose, dev, 0x8c, 0x00007002); + pci_hose_write_config_dword(hose, dev, 0x8c, 0x00007002); pci_hose_write_config_byte(hose, dev, 0x91, 0x00); /* card control */ pci_hose_write_config_byte(hose, dev, 0x92, 0x62); /* device control */ - + if (te->device != 0xac56) { pci_hose_write_config_byte(hose, dev, 0x93, 0x21); /* async interrupt enable */ pci_hose_write_config_word(hose, dev, 0xa8, 0x0000); /* reset GPIO */ @@ -216,22 +215,21 @@ static void pci_sc520_spunk_configure_cardbus(struct pci_controller *hose, pci_hose_write_config_byte(hose, dev, 0x93, 0x20); /* */ } pci_hose_write_config_word(hose, dev, 0xa4, 0x8000); /* reset power management */ - - + + pci_hose_read_config_dword(hose, dev, PCI_BASE_ADDRESS_0, &io_base); io_base &= ~0xfL; - + writeb(0x07, io_base+0x803); /* route CSC irq though ExCA and enable IRQ7 */ writel(0, io_base+0x10); /* CLKRUN default */ writel(0, io_base+0x20); /* CLKRUN default */ - -} +} static struct pci_config_table pci_sc520_spunk_config_table[] = { - { 0x104c, 0xac50, PCI_ANY_ID, 0, 0x0a, 0, pci_sc520_spunk_configure_cardbus, { 0, 0, 0} }, - { 0x104c, 0xac56, PCI_ANY_ID, 0, 0x0a, 0, pci_sc520_spunk_configure_cardbus, { 0, 0, 0} }, + { 0x104c, 0xac50, PCI_ANY_ID, 0, 0x0a, 0, pci_sc520_spunk_configure_cardbus, { 0, 0, 0} }, + { 0x104c, 0xac56, PCI_ANY_ID, 0, 0x0a, 0, pci_sc520_spunk_configure_cardbus, { 0, 0, 0} }, { 0, 0, 0, 0, 0, 0, NULL, {0,0,0}} }; @@ -251,22 +249,22 @@ void pci_init_board(void) /* set up the ISA bus timing and system address mappings */ static void bus_init(void) { - /* versions + /* versions * 0 Hyglo versions 0.95 and 0.96 (large baords) * ?? Hyglo version 0.97 (small board) * 10 Spunk board */ int version = read_mmcr_byte(SC520_SYSINFO); - + if (version) { /* set up the GP IO pins (for the Spunk board) */ write_mmcr_word(SC520_PIOPFS31_16, 0xfff0); /* set the GPIO pin function 31-16 reg */ write_mmcr_word(SC520_PIOPFS15_0, 0x000f); /* set the GPIO pin function 15-0 reg */ write_mmcr_word(SC520_PIODIR31_16, 0x000f); /* set the GPIO direction 31-16 reg */ write_mmcr_word(SC520_PIODIR15_0, 0x1ff0); /* set the GPIO direction 15-0 reg */ - write_mmcr_byte(SC520_CSPFS, 0xc0); /* set the CS pin function reg */ + write_mmcr_byte(SC520_CSPFS, 0xc0); /* set the CS pin function reg */ write_mmcr_byte(SC520_CLKSEL, 0x70); - + write_mmcr_word(SC520_PIOCLR31_16, 0x0003); /* reset SSI chip-selects */ write_mmcr_word(SC520_PIOSET31_16, 0x000c); @@ -276,54 +274,52 @@ static void bus_init(void) write_mmcr_word(SC520_PIOPFS15_0, 0x1e7f); /* set the GPIO pin function 15-0 reg */ write_mmcr_word(SC520_PIODIR31_16, 0x003f); /* set the GPIO direction 31-16 reg */ write_mmcr_word(SC520_PIODIR15_0, 0xe180); /* set the GPIO direction 15-0 reg */ - write_mmcr_byte(SC520_CSPFS, 0x00); /* set the CS pin function reg */ + write_mmcr_byte(SC520_CSPFS, 0x00); /* set the CS pin function reg */ write_mmcr_byte(SC520_CLKSEL, 0x70); - + write_mmcr_word(SC520_PIOCLR15_0, 0x0180); /* reset SSI chip-selects */ } - - write_mmcr_byte(SC520_GPCSRT, 1); /* set the GP CS offset */ + + write_mmcr_byte(SC520_GPCSRT, 1); /* set the GP CS offset */ write_mmcr_byte(SC520_GPCSPW, 3); /* set the GP CS pulse width */ write_mmcr_byte(SC520_GPCSOFF, 1); /* set the GP CS offset */ write_mmcr_byte(SC520_GPRDW, 3); /* set the RD pulse width */ write_mmcr_byte(SC520_GPRDOFF, 1); /* set the GP RD offset */ - write_mmcr_byte(SC520_GPWRW, 3); /* set the GP WR pulse width */ + write_mmcr_byte(SC520_GPWRW, 3); /* set the GP WR pulse width */ write_mmcr_byte(SC520_GPWROFF, 1); /* set the GP WR offset */ - write_mmcr_word(SC520_BOOTCSCTL, 0x0407); /* set up timing of BOOTCS */ - + write_mmcr_word(SC520_BOOTCSCTL, 0x0407); /* set up timing of BOOTCS */ + /* adjust the memory map: * by default the first 256MB (0x00000000 - 0x0fffffff) is mapped to SDRAM * and 256MB to 1G-128k (0x1000000 - 0x37ffffff) is mapped to PCI mmio - * we need to map 1G-128k - 1G (0x38000000 - 0x3fffffff) to CS1 */ - - - + * we need to map 1G-128k - 1G (0x38000000 - 0x3fffffff) to CS1 */ + + /* bootcs */ - write_mmcr_long(SC520_PAR12, 0x8bffe800); - + write_mmcr_long(SC520_PAR12, 0x8bffe800); + /* IDE0 = GPCS6 1f0-1f7 */ - write_mmcr_long(SC520_PAR3, 0x380801f0); + write_mmcr_long(SC520_PAR3, 0x380801f0); /* IDE1 = GPCS7 3f6 */ - write_mmcr_long(SC520_PAR4, 0x3c0003f6); + write_mmcr_long(SC520_PAR4, 0x3c0003f6); - asm ("wbinvd\n"); /* Flush cache, req. after setting the unchached attribute ona PAR */ + asm ("wbinvd\n"); /* Flush cache, req. after setting the unchached attribute ona PAR */ - write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) & ~(UART2_DIS|UART1_DIS)); + write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) & ~(UART2_DIS|UART1_DIS)); } - /* par usage: * PAR0 (legacy_video) * PAR1 (PCI ROM mapping) - * PAR2 - * PAR3 IDE + * PAR2 + * PAR3 IDE * PAR4 IDE * PAR5 (legacy_video) - * PAR6 + * PAR6 * PAR7 (legacy_video) * PAR8 (legacy_video) * PAR9 (legacy_video) @@ -335,21 +331,21 @@ static void bus_init(void) * PAR15 */ -/* +/* * This function should map a chunk of size bytes * of the system address space to the ISA bus - * + * * The function will return the memory address * as seen by the host (which may very will be the * same as the bus address) */ -u32 isa_map_rom(u32 bus_addr, int size) +u32 isa_map_rom(u32 bus_addr, int size) { u32 par; - - printf("isa_map_rom asked to map %d bytes at %x\n", + + printf("isa_map_rom asked to map %d bytes at %x\n", size, bus_addr); - + par = size; if (par < 0x80000) { par = 0x80000; @@ -360,12 +356,12 @@ u32 isa_map_rom(u32 bus_addr, int size) par <<= 18; par |= (bus_addr>>12); par |= 0x50000000; - + printf ("setting PAR11 to %x\n", par); - + /* Map rom 0x10000 with PAR1 */ write_mmcr_long(SC520_PAR11, par); - + return bus_addr; } @@ -386,19 +382,19 @@ void isa_unmap_rom(u32 addr) #ifdef CONFIG_PCI #define PCI_ROM_TEMP_SPACE 0x10000 -/* +/* * This function should map a chunk of size bytes * of the system address space to the PCI bus, * suitable to map PCI ROMS (bus address < 16M) * the function will return the host memory address * which should be converted into a bus address - * before used to configure the PCI rom address + * before used to configure the PCI rom address * decoder */ -u32 pci_get_rom_window(struct pci_controller *hose, int size) +u32 pci_get_rom_window(struct pci_controller *hose, int size) { u32 par; - + par = size; if (par < 0x80000) { par = 0x80000; @@ -409,12 +405,12 @@ u32 pci_get_rom_window(struct pci_controller *hose, int size) par <<= 14; par |= (PCI_ROM_TEMP_SPACE>>16); par |= 0x72000000; - + printf ("setting PAR1 to %x\n", par); - + /* Map rom 0x10000 with PAR1 */ write_mmcr_long(SC520_PAR1, par); - + return PCI_ROM_TEMP_SPACE; } @@ -431,51 +427,51 @@ void pci_remove_rom_window(struct pci_controller *hose, u32 addr) return; } printf(" not ours\n"); - + } /* * This function is called in order to provide acces to the - * legacy video I/O ports on the PCI bus. - * After this function accesses to I/O ports 0x3b0-0x3bb and + * legacy video I/O ports on the PCI bus. + * After this function accesses to I/O ports 0x3b0-0x3bb and * 0x3c0-0x3df shuld result in transactions on the PCI bus. - * + * */ int pci_enable_legacy_video_ports(struct pci_controller *hose) { /* Map video memory to 0xa0000*/ write_mmcr_long(SC520_PAR0, 0x7200400a); - + /* forward all I/O accesses to PCI */ - write_mmcr_byte(SC520_ADDDECCTL, - read_mmcr_byte(SC520_ADDDECCTL) | IO_HOLE_DEST_PCI); - - + write_mmcr_byte(SC520_ADDDECCTL, + read_mmcr_byte(SC520_ADDDECCTL) | IO_HOLE_DEST_PCI); + + /* so we map away all io ports to pci (only way to access pci io * below 0x400. But then we have to map back the portions that we dont * use so that the generate cycles on the GPIO bus where the sio and - * ISA slots are connected, this requre the use of several PAR registers + * ISA slots are connected, this requre the use of several PAR registers */ - + /* bring 0x100 - 0x2f7 back to ISA using PAR5 */ - write_mmcr_long(SC520_PAR5, 0x31f70100); - + write_mmcr_long(SC520_PAR5, 0x31f70100); + /* com2 use 2f8-2ff */ - + /* bring 0x300 - 0x3af back to ISA using PAR7 */ - write_mmcr_long(SC520_PAR7, 0x30af0300); - + write_mmcr_long(SC520_PAR7, 0x30af0300); + /* vga use 3b0-3bb */ - + /* bring 0x3bc - 0x3bf back to ISA using PAR8 */ - write_mmcr_long(SC520_PAR8, 0x300303bc); - + write_mmcr_long(SC520_PAR8, 0x300303bc); + /* vga use 3c0-3df */ - + /* bring 0x3e0 - 0x3f7 back to ISA using PAR9 */ - write_mmcr_long(SC520_PAR9, 0x301703e0); - - /* com1 use 3f8-3ff */ + write_mmcr_long(SC520_PAR9, 0x301703e0); + + /* com1 use 3f8-3ff */ return 0; } @@ -488,20 +484,20 @@ int pci_enable_legacy_video_ports(struct pci_controller *hose) int board_init(void) { DECLARE_GLOBAL_DATA_PTR; - - init_sc520(); + + init_sc520(); bus_init(); irq_init(); - + /* max drive current on SDRAM */ write_mmcr_word(SC520_DSCTL, 0x0100); - + /* enter debug mode after next reset (only if jumper is also set) */ write_mmcr_byte(SC520_RESCFG, 0x08); /* configure the software timer to 33.000MHz */ write_mmcr_byte(SC520_SWTMRCFG, 1); gd->bus_clk = 33000000; - + return 0; } @@ -513,25 +509,25 @@ int dram_init(void) void show_boot_progress(int val) { - int version = read_mmcr_byte(SC520_SYSINFO); - + int version = read_mmcr_byte(SC520_SYSINFO); + if (version == 0) { /* PIO31-PIO16 Data */ - write_mmcr_word(SC520_PIODATA31_16, + write_mmcr_word(SC520_PIODATA31_16, (read_mmcr_word(SC520_PIODATA31_16) & 0xffc0)| ((val&0x7e)>>1)); /* 0x1f8 >> 3 */ - + /* PIO0-PIO15 Data */ - write_mmcr_word(SC520_PIODATA15_0, + write_mmcr_word(SC520_PIODATA15_0, (read_mmcr_word(SC520_PIODATA15_0) & 0x1fff)| ((val&0x7)<<13)); } else { /* newer boards use PIO4-PIO12 */ /* PIO0-PIO15 Data */ -#if 0 - val = (val & 0x007) | ((val & 0x038) << 3) | ((val & 0x1c0) >> 3); +#if 0 + val = (val & 0x007) | ((val & 0x038) << 3) | ((val & 0x1c0) >> 3); #else - val = (val & 0x007) | ((val & 0x07e) << 2); + val = (val & 0x007) | ((val & 0x07e) << 2); #endif - write_mmcr_word(SC520_PIODATA15_0, + write_mmcr_word(SC520_PIODATA15_0, (read_mmcr_word(SC520_PIODATA15_0) & 0xe00f) | ((val&0x01ff)<<4)); } } @@ -539,17 +535,17 @@ void show_boot_progress(int val) int last_stage_init(void) { - + int version = read_mmcr_byte(SC520_SYSINFO); - + printf("Omicron Ceti SC520 Spunk revision %x\n", version); - + #if 0 if (version) { int x, y; - + printf("eeprom probe %d\n", spi_eeprom_probe(1)); - + spi_eeprom_read(1, 0, (u8*)&x, 2); spi_eeprom_read(1, 1, (u8*)&y, 2); printf("eeprom bytes %04x%04x\n", x, y); @@ -557,130 +553,129 @@ int last_stage_init(void) y ^= 0xffff; spi_eeprom_write(1, 0, (u8*)&x, 2); spi_eeprom_write(1, 1, (u8*)&y, 2); - + spi_eeprom_read(1, 0, (u8*)&x, 2); spi_eeprom_read(1, 1, (u8*)&y, 2); printf("eeprom bytes %04x%04x\n", x, y); - + } else { int x, y; - + printf("eeprom probe %d\n", mw_eeprom_probe(1)); - + mw_eeprom_read(1, 0, (u8*)&x, 2); mw_eeprom_read(1, 1, (u8*)&y, 2); printf("eeprom bytes %04x%04x\n", x, y); - + x ^= 0xffff; y ^= 0xffff; mw_eeprom_write(1, 0, (u8*)&x, 2); mw_eeprom_write(1, 1, (u8*)&y, 2); - + mw_eeprom_read(1, 0, (u8*)&x, 2); mw_eeprom_read(1, 1, (u8*)&y, 2); printf("eeprom bytes %04x%04x\n", x, y); - - + + } #endif ds1722_probe(2); - + return 0; } -void ssi_chip_select(int dev) +void ssi_chip_select(int dev) { int version = read_mmcr_byte(SC520_SYSINFO); - + if (version) { /* Spunk board: EEPROM and CAN are actove-low, TEMP and AUX are active high */ switch (dev) { case 1: /* EEPROM */ write_mmcr_word(SC520_PIOCLR31_16, 0x0004); break; - + case 2: /* Temp Probe */ write_mmcr_word(SC520_PIOSET31_16, 0x0002); break; - + case 3: /* CAN */ write_mmcr_word(SC520_PIOCLR31_16, 0x0008); break; - - case 4: /* AUX */ + + case 4: /* AUX */ write_mmcr_word(SC520_PIOSET31_16, 0x0001); break; - + case 0: write_mmcr_word(SC520_PIOCLR31_16, 0x0003); write_mmcr_word(SC520_PIOSET31_16, 0x000c); break; - + default: printf("Illegal SSI device requested: %d\n", dev); } } else { - + /* Globox board: Both EEPROM and TEMP are active-high */ switch (dev) { case 1: /* EEPROM */ write_mmcr_word(SC520_PIOSET15_0, 0x0100); break; - + case 2: /* Temp Probe */ write_mmcr_word(SC520_PIOSET15_0, 0x0080); break; - + case 0: write_mmcr_word(SC520_PIOCLR15_0, 0x0180); break; - + default: printf("Illegal SSI device requested: %d\n", dev); } - } + } } -void spi_init_f(void) +void spi_init_f(void) { read_mmcr_byte(SC520_SYSINFO) ? - spi_eeprom_probe(1) : + spi_eeprom_probe(1) : mw_eeprom_probe(1); - + } -ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len) +ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len) { int offset; int i; - + offset = 0; for (i=0;i<alen;i++) { offset <<= 8; offset |= addr[i]; } - + return read_mmcr_byte(SC520_SYSINFO) ? - spi_eeprom_read(1, offset, buffer, len) : + spi_eeprom_read(1, offset, buffer, len) : mw_eeprom_read(1, offset, buffer, len); } -ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len) +ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len) { int offset; int i; - + offset = 0; for (i=0;i<alen;i++) { offset <<= 8; offset |= addr[i]; } - + return read_mmcr_byte(SC520_SYSINFO) ? - spi_eeprom_write(1, offset, buffer, len) : + spi_eeprom_write(1, offset, buffer, len) : mw_eeprom_write(1, offset, buffer, len); } - diff --git a/board/sc520_spunk/sc520_spunk_asm.S b/board/sc520_spunk/sc520_spunk_asm.S index e198125b8c..8b3410399b 100644 --- a/board/sc520_spunk/sc520_spunk_asm.S +++ b/board/sc520_spunk/sc520_spunk_asm.S @@ -23,7 +23,7 @@ /* now setup the General purpose bus to give us access to the LEDs. * We can then use the leds to display status information. - */ + */ sc520_cdp_registers: /* size offset value */ @@ -44,12 +44,12 @@ sc520_cdp_registers: /* board early intialization */ .globl early_board_init early_board_init: - movl $sc520_cdp_registers,%esi -init_loop: - movl $0xfffef000,%edi /* MMCR base to edi */ + movl $sc520_cdp_registers,%esi +init_loop: + movl $0xfffef000,%edi /* MMCR base to edi */ movw (%esi), %bx /* load size to bx */ cmpw $0, %bx /* if size is 0 we're done */ - je done + je done xorl %edx,%edx movw 2(%esi), %dx /* load MMCR offset to dx */ addl %edx, %edi /* add offset to base in edi */ @@ -60,23 +60,22 @@ init_loop: je word /* word op? */ movl %eax, (%edi) /* must be long, then */ jmp next -byte: movb %al,(%edi) +byte: movb %al,(%edi) jmp next word: movw %ax,(%edi) next: addl $8, %esi /* advance esi */ jmp init_loop /* light all leds */ -done: movl $0xfffefc32,%edx - movw $0000,(%edx) +done: movl $0xfffefc32,%edx + movw $0000,(%edx) jmp *%ebp /* return to caller */ .globl __show_boot_progress __show_boot_progress: - movl $0xfffefc32,%edx - xorw $0xffff, %ax - movw %ax,(%edx) + movl $0xfffefc32,%edx + xorw $0xffff, %ax + movw %ax,(%edx) jmp *%ebp - diff --git a/board/sc520_spunk/sc520_spunk_asm16.S b/board/sc520_spunk/sc520_spunk_asm16.S index cdcbbbef6a..8bb1766b50 100644 --- a/board/sc520_spunk/sc520_spunk_asm16.S +++ b/board/sc520_spunk/sc520_spunk_asm16.S @@ -34,32 +34,32 @@ board_init16: /* Alias MMCR to 0xdf000 */ movw $0xfffc, %dx - movl $0x800df0cb, %eax - outl %eax, %dx - + movl $0x800df0cb, %eax + outl %eax, %dx + /* Set ds to point to MMCR alias */ - movw $0xdf00, %ax - movw %ax, %ds - - /* Map the entire flash at 0x38000000 + movw $0xdf00, %ax + movw %ax, %ds + + /* Map the entire flash at 0x38000000 * (with BOOTCS and PAR14, use 0xabfff800 for ROMCS1) */ movl $0xc0, %edi - movl $0x8bfff800, %eax - movl %eax, (%di) + movl $0x8bfff800, %eax + movl %eax, (%di) /* Disable SDRAM write buffer */ movw $0x40,%di - xorw %ax,%ax - movb %al, (%di) + xorw %ax,%ax + movb %al, (%di) /* Disabe MMCR alias */ movw $0xfffc, %dx - movl $0x000000cb, %eax - outl %eax, %dx - + movl $0x000000cb, %eax + outl %eax, %dx + /* the return address is stored in bp */ jmp *%bp - + .section .bios, "ax" .code16 @@ -67,18 +67,17 @@ board_init16: realmode_reset: /* Alias MMCR to 0xdf000 */ movw $0xfffc, %dx - movl $0x800df0cb, %eax - outl %eax, %dx - + movl $0x800df0cb, %eax + outl %eax, %dx + /* Set ds to point to MMCR alias */ - movw $0xdf00, %ax - movw %ax, %ds - + movw $0xdf00, %ax + movw %ax, %ds + /* issue software reset thorugh MMCR */ movl $0xd72, %edi - movb $0x01, %al - movb %al, (%di) + movb $0x01, %al + movb %al, (%di) 1: hlt jmp 1 - diff --git a/board/sc520_spunk/u-boot.lds b/board/sc520_spunk/u-boot.lds index fbab9b85f2..da7ea18245 100644 --- a/board/sc520_spunk/u-boot.lds +++ b/board/sc520_spunk/u-boot.lds @@ -1,3 +1,4 @@ + /* * (C) Copyright 2002 * Daniel Engström, Omicron Ceti AB, daniel@omicron.se. @@ -26,60 +27,65 @@ OUTPUT_ARCH(i386) ENTRY(_start) SECTIONS -{ +{ . = 0x387c0000; /* Where bootcode in the flash is mapped */ .text : { *(.text); } - - . = ALIGN(4); - .rodata : { *(.rodata) } - . = 0x400000; /* Ram data segment to use */ + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = 0x400000; /* Ram data segment to use */ _i386boot_romdata_dest = ABSOLUTE(.); - .data : AT ( LOADADDR(.rodata) + SIZEOF(.rodata) ) { *(.data) } - _i386boot_romdata_start = LOADADDR(.data); + .data : AT ( LOADADDR(.rodata) + SIZEOF(.rodata) ) { *(.data) } + _i386boot_romdata_start = LOADADDR(.data); - . = ALIGN(4); - .got : AT ( LOADADDR(.data) + SIZEOF(.data) ) { *(.got) } - _i386boot_romdata_size = SIZEOF(.data) + SIZEOF(.got); + . = ALIGN(4); + .got : AT ( LOADADDR(.data) + SIZEOF(.data) ) { *(.got) } + _i386boot_romdata_size = SIZEOF(.data) + SIZEOF(.got); - . = ALIGN(4); + . = ALIGN(4); _i386boot_bss_start = ABSOLUTE(.); - .bss : { *(.bss) } + .bss : { *(.bss) } _i386boot_bss_size = SIZEOF(.bss); - - + + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + /* 16bit realmode trampoline code */ .realmode 0x7c0 : AT ( LOADADDR(.got) + SIZEOF(.got) ) { *(.realmode) } - + _i386boot_realmode = LOADADDR(.realmode); _i386boot_realmode_size = SIZEOF(.realmode); - + /* 16bit BIOS emulation code (just enough to boot Linux) */ .bios 0 : AT ( LOADADDR(.realmode) + SIZEOF(.realmode) ) { *(.bios) } - + _i386boot_bios = LOADADDR(.bios); _i386boot_bios_size = SIZEOF(.bios); - + /* The load addresses below assumes that the flash * will be mapped so that 0x387f0000 == 0xffff0000 * at reset time * - * The fe00 and ff00 offsets of the start32 and start16 + * The fe00 and ff00 offsets of the start32 and start16 * segments are arbitrary, the just have to be mapped * at reset and the code have to fit. * The fff0 offset of reset is important, however. */ - - + + . = 0xfffffe00; - .start32 : AT (0x387ffe00) { *(.start32); } - + .start32 : AT (0x387ffe00) { *(.start32); } + . = 0xff00; - .start16 : AT (0x387fff00) { *(.start16); } - + .start16 : AT (0x387fff00) { *(.start16); } + . = 0xfff0; - .reset : AT (0x387ffff0) { *(.reset); } + .reset : AT (0x387ffff0) { *(.reset); } _i386boot_end = (LOADADDR(.reset) + SIZEOF(.reset) ); } |
