diff options
Diffstat (limited to 'board/samsung/origen')
| -rw-r--r-- | board/samsung/origen/Makefile | 11 | ||||
| -rw-r--r-- | board/samsung/origen/lowlevel_init.S | 357 | ||||
| -rw-r--r-- | board/samsung/origen/mem_setup.S | 421 | ||||
| -rw-r--r-- | board/samsung/origen/mmc_boot.c | 58 | ||||
| -rw-r--r-- | board/samsung/origen/origen.c | 46 | ||||
| -rw-r--r-- | board/samsung/origen/origen_setup.h | 607 |
6 files changed, 48 insertions, 1452 deletions
diff --git a/board/samsung/origen/Makefile b/board/samsung/origen/Makefile index 3a885a5cdb..63c8b46831 100644 --- a/board/samsung/origen/Makefile +++ b/board/samsung/origen/Makefile @@ -24,19 +24,12 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -SOBJS := mem_setup.o -SOBJS += lowlevel_init.o - ifndef CONFIG_SPL_BUILD COBJS += origen.o endif -ifdef CONFIG_SPL_BUILD -COBJS += mmc_boot.o -endif - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) ALL +=$(obj).depend $(LIB) diff --git a/board/samsung/origen/lowlevel_init.S b/board/samsung/origen/lowlevel_init.S deleted file mode 100644 index be9d418265..0000000000 --- a/board/samsung/origen/lowlevel_init.S +++ /dev/null @@ -1,357 +0,0 @@ -/* - * Lowlevel setup for ORIGEN board based on EXYNOS4210 - * - * Copyright (C) 2011 Samsung Electronics - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <version.h> -#include <asm/arch/cpu.h> -#include "origen_setup.h" -/* - * Register usages: - * - * r5 has zero always - * r7 has GPIO part1 base 0x11400000 - * r6 has GPIO part2 base 0x11000000 - */ - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - - .globl lowlevel_init -lowlevel_init: - push {lr} - - /* r5 has always zero */ - mov r5, #0 - ldr r7, =EXYNOS4_GPIO_PART1_BASE - ldr r6, =EXYNOS4_GPIO_PART2_BASE - - /* check reset status */ - ldr r0, =(EXYNOS4_POWER_BASE + INFORM1_OFFSET) - ldr r1, [r0] - - /* AFTR wakeup reset */ - ldr r2, =S5P_CHECK_DIDLE - cmp r1, r2 - beq exit_wakeup - - /* LPA wakeup reset */ - ldr r2, =S5P_CHECK_LPA - cmp r1, r2 - beq exit_wakeup - - /* Sleep wakeup reset */ - ldr r2, =S5P_CHECK_SLEEP - cmp r1, r2 - beq wakeup_reset - - /* - * If U-boot is already running in ram, no need to relocate U-Boot. - * Memory controller must be configured before relocating U-Boot - * in ram. - */ - ldr r0, =0x0ffffff /* r0 <- Mask Bits*/ - bic r1, pc, r0 /* pc <- current addr of code */ - /* r1 <- unmasked bits of pc */ - ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */ - bic r2, r2, r0 /* r2 <- unmasked bits of r2*/ - cmp r1, r2 /* compare r1, r2 */ - beq 1f /* r0 == r1 then skip sdram init */ - - /* init system clock */ - bl system_clock_init - - /* Memory initialize */ - bl mem_ctrl_asm_init - -1: - /* for UART */ - bl uart_asm_init - bl arch_cpu_init - bl tzpc_init - pop {pc} - -wakeup_reset: - bl system_clock_init - bl mem_ctrl_asm_init - bl arch_cpu_init - bl tzpc_init - -exit_wakeup: - /* Load return address and jump to kernel */ - ldr r0, =(EXYNOS4_POWER_BASE + INFORM0_OFFSET) - - /* r1 = physical address of exynos4210_cpu_resume function */ - ldr r1, [r0] - - /* Jump to kernel*/ - mov pc, r1 - nop - nop - -/* - * system_clock_init: Initialize core clock and bus clock. - * void system_clock_init(void) - */ -system_clock_init: - push {lr} - ldr r0, =EXYNOS4_CLOCK_BASE - - /* APLL(1), MPLL(1), CORE(0), HPM(0) */ - ldr r1, =CLK_SRC_CPU_VAL - ldr r2, =CLK_SRC_CPU_OFFSET - str r1, [r0, r2] - - /* wait ?us */ - mov r1, #0x10000 -2: subs r1, r1, #1 - bne 2b - - ldr r1, =CLK_SRC_TOP0_VAL - ldr r2, =CLK_SRC_TOP0_OFFSET - str r1, [r0, r2] - - ldr r1, =CLK_SRC_TOP1_VAL - ldr r2, =CLK_SRC_TOP1_OFFSET - str r1, [r0, r2] - - /* DMC */ - ldr r1, =CLK_SRC_DMC_VAL - ldr r2, =CLK_SRC_DMC_OFFSET - str r1, [r0, r2] - - /*CLK_SRC_LEFTBUS */ - ldr r1, =CLK_SRC_LEFTBUS_VAL - ldr r2, =CLK_SRC_LEFTBUS_OFFSET - str r1, [r0, r2] - - /*CLK_SRC_RIGHTBUS */ - ldr r1, =CLK_SRC_RIGHTBUS_VAL - ldr r2, =CLK_SRC_RIGHTBUS_OFFSET - str r1, [r0, r2] - - /* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */ - ldr r1, =CLK_SRC_FSYS_VAL - ldr r2, =CLK_SRC_FSYS_OFFSET - str r1, [r0, r2] - - /* UART[0:4] */ - ldr r1, =CLK_SRC_PERIL0_VAL - ldr r2, =CLK_SRC_PERIL0_OFFSET - str r1, [r0, r2] - - /* CAM , FIMC 0-3 */ - ldr r1, =CLK_SRC_CAM_VAL - ldr r2, =CLK_SRC_CAM_OFFSET - str r1, [r0, r2] - - /* MFC */ - ldr r1, =CLK_SRC_MFC_VAL - ldr r2, =CLK_SRC_MFC_OFFSET - str r1, [r0, r2] - - /* G3D */ - ldr r1, =CLK_SRC_G3D_VAL - ldr r2, =CLK_SRC_G3D_OFFSET - str r1, [r0, r2] - - /* LCD0 */ - ldr r1, =CLK_SRC_LCD0_VAL - ldr r2, =CLK_SRC_LCD0_OFFSET - str r1, [r0, r2] - - /* wait ?us */ - mov r1, #0x10000 -3: subs r1, r1, #1 - bne 3b - - /* CLK_DIV_CPU0 */ - ldr r1, =CLK_DIV_CPU0_VAL - ldr r2, =CLK_DIV_CPU0_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_CPU1 */ - ldr r1, =CLK_DIV_CPU1_VAL - ldr r2, =CLK_DIV_CPU1_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_DMC0 */ - ldr r1, =CLK_DIV_DMC0_VAL - ldr r2, =CLK_DIV_DMC0_OFFSET - str r1, [r0, r2] - - /*CLK_DIV_DMC1 */ - ldr r1, =CLK_DIV_DMC1_VAL - ldr r2, =CLK_DIV_DMC1_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_LEFTBUS */ - ldr r1, =CLK_DIV_LEFTBUS_VAL - ldr r2, =CLK_DIV_LEFTBUS_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_RIGHTBUS */ - ldr r1, =CLK_DIV_RIGHTBUS_VAL - ldr r2, =CLK_DIV_RIGHTBUS_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_TOP */ - ldr r1, =CLK_DIV_TOP_VAL - ldr r2, =CLK_DIV_TOP_OFFSET - str r1, [r0, r2] - - /* MMC[0:1] */ - ldr r1, =CLK_DIV_FSYS1_VAL /* 800(MPLL) / (15 + 1) */ - ldr r2, =CLK_DIV_FSYS1_OFFSET - str r1, [r0, r2] - - /* MMC[2:3] */ - ldr r1, =CLK_DIV_FSYS2_VAL /* 800(MPLL) / (15 + 1) */ - ldr r2, =CLK_DIV_FSYS2_OFFSET - str r1, [r0, r2] - - /* MMC4 */ - ldr r1, =CLK_DIV_FSYS3_VAL /* 800(MPLL) / (15 + 1) */ - ldr r2, =CLK_DIV_FSYS3_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_PERIL0: UART Clock Divisors */ - ldr r1, =CLK_DIV_PERIL0_VAL - ldr r2, =CLK_DIV_PERIL0_OFFSET - str r1, [r0, r2] - - /* CAM, FIMC 0-3: CAM Clock Divisors */ - ldr r1, =CLK_DIV_CAM_VAL - ldr r2, =CLK_DIV_CAM_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_MFC: MFC Clock Divisors */ - ldr r1, =CLK_DIV_MFC_VAL - ldr r2, =CLK_DIV_MFC_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_G3D: G3D Clock Divisors */ - ldr r1, =CLK_DIV_G3D_VAL - ldr r2, =CLK_DIV_G3D_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_LCD0: LCD0 Clock Divisors */ - ldr r1, =CLK_DIV_LCD0_VAL - ldr r2, =CLK_DIV_LCD0_OFFSET - str r1, [r0, r2] - - /* Set PLL locktime */ - ldr r1, =PLL_LOCKTIME - ldr r2, =APLL_LOCK_OFFSET - str r1, [r0, r2] - - ldr r1, =PLL_LOCKTIME - ldr r2, =MPLL_LOCK_OFFSET - str r1, [r0, r2] - - ldr r1, =PLL_LOCKTIME - ldr r2, =EPLL_LOCK_OFFSET - str r1, [r0, r2] - - ldr r1, =PLL_LOCKTIME - ldr r2, =VPLL_LOCK_OFFSET - str r1, [r0, r2] - - /* APLL_CON1 */ - ldr r1, =APLL_CON1_VAL - ldr r2, =APLL_CON1_OFFSET - str r1, [r0, r2] - - /* APLL_CON0 */ - ldr r1, =APLL_CON0_VAL - ldr r2, =APLL_CON0_OFFSET - str r1, [r0, r2] - - /* MPLL_CON1 */ - ldr r1, =MPLL_CON1_VAL - ldr r2, =MPLL_CON1_OFFSET - str r1, [r0, r2] - - /* MPLL_CON0 */ - ldr r1, =MPLL_CON0_VAL - ldr r2, =MPLL_CON0_OFFSET - str r1, [r0, r2] - - /* EPLL */ - ldr r1, =EPLL_CON1_VAL - ldr r2, =EPLL_CON1_OFFSET - str r1, [r0, r2] - - /* EPLL_CON0 */ - ldr r1, =EPLL_CON0_VAL - ldr r2, =EPLL_CON0_OFFSET - str r1, [r0, r2] - - /* VPLL_CON1 */ - ldr r1, =VPLL_CON1_VAL - ldr r2, =VPLL_CON1_OFFSET - str r1, [r0, r2] - - /* VPLL_CON0 */ - ldr r1, =VPLL_CON0_VAL - ldr r2, =VPLL_CON0_OFFSET - str r1, [r0, r2] - - /* wait ?us */ - mov r1, #0x30000 -4: subs r1, r1, #1 - bne 4b - - pop {pc} -/* - * uart_asm_init: Initialize UART in asm mode, 115200bps fixed. - * void uart_asm_init(void) - */ - .globl uart_asm_init -uart_asm_init: - - /* setup UART0-UART3 GPIOs (part1) */ - mov r0, r7 - ldr r1, =EXYNOS4_GPIO_A0_CON_VAL - str r1, [r0, #EXYNOS4_GPIO_A0_CON_OFFSET] - ldr r1, =EXYNOS4_GPIO_A1_CON_VAL - str r1, [r0, #EXYNOS4_GPIO_A1_CON_OFFSET] - - ldr r0, =EXYNOS4_UART_BASE - add r0, r0, #EXYNOS4_DEFAULT_UART_OFFSET - - ldr r1, =ULCON_VAL - str r1, [r0, #ULCON_OFFSET] - ldr r1, =UCON_VAL - str r1, [r0, #UCON_OFFSET] - ldr r1, =UFCON_VAL - str r1, [r0, #UFCON_OFFSET] - ldr r1, =UBRDIV_VAL - str r1, [r0, #UBRDIV_OFFSET] - ldr r1, =UFRACVAL_VAL - str r1, [r0, #UFRACVAL_OFFSET] - mov pc, lr - nop - nop - nop - diff --git a/board/samsung/origen/mem_setup.S b/board/samsung/origen/mem_setup.S deleted file mode 100644 index b49b193a79..0000000000 --- a/board/samsung/origen/mem_setup.S +++ /dev/null @@ -1,421 +0,0 @@ -/* - * Memory setup for ORIGEN board based on EXYNOS4210 - * - * Copyright (C) 2011 Samsung Electronics - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include "origen_setup.h" -#define SET_MIU - - .globl mem_ctrl_asm_init -mem_ctrl_asm_init: - /* - * Async bridge configuration at CPU_core: - * 1: half_sync - * 0: full_sync - */ - ldr r0, =ASYNC_CONFIG - mov r1, #1 - str r1, [r0] - -#ifdef SET_MIU - ldr r0, =EXYNOS4_MIU_BASE - /* Interleave: 2Bit, Interleave_bit1: 0x21, Interleave_bit2: 0x7 */ - ldr r1, =0x20001507 - str r1, [r0, #APB_SFR_INTERLEAVE_CONF_OFFSET] - - /* Update MIU Configuration */ - ldr r1, =0x00000001 - str r1, [r0, #APB_SFR_ARBRITATION_CONF_OFFSET] -#endif - /* DREX0 */ - ldr r0, =EXYNOS4_DMC0_BASE - - /* - * DLL Parameter Setting: - * Termination: Enable R/W - * Phase Delay for DQS Cleaning: 180' Shift - */ - ldr r1, =0xe0000086 - str r1, [r0, #DMC_PHYCONTROL1] - - /* - * ZQ Calibration - * Termination: Disable - * Auto Calibration Start: Enable - */ - ldr r1, =0xE3855703 - str r1, [r0, #DMC_PHYZQCONTROL] - - /* Wait ?us*/ - mov r2, #0x100000 -1: subs r2, r2, #1 - bne 1b - - /* - * Update DLL Information: - * Force DLL Resyncronization - */ - ldr r1, =0xe000008e - str r1, [r0, #DMC_PHYCONTROL1] - - /* Reset Force DLL Resyncronization */ - ldr r1, =0xe0000086 - str r1, [r0, #DMC_PHYCONTROL1] - - /* Enable Differential DQS, DLL Off*/ - ldr r1, =0x71101008 - str r1, [r0, #DMC_PHYCONTROL0] - - /* Activate PHY DLL: DLL On */ - ldr r1, =0x7110100A - str r1, [r0, #DMC_PHYCONTROL0] - - /* Set DLL Parameters */ - ldr r1, =0xe0000086 - str r1, [r0, #DMC_PHYCONTROL1] - - /* DLL Start */ - ldr r1, =0x7110100B - str r1, [r0, #DMC_PHYCONTROL0] - - ldr r1, =0x00000000 - str r1, [r0, #DMC_PHYCONTROL2] - - /* Set Clock Ratio of Bus clock to Memory Clock */ - ldr r1, =0x0FFF301a - str r1, [r0, #DMC_CONCONTROL] - - /* - * Memor Burst length: 8 - * Number of chips: 2 - * Memory Bus width: 32 bit - * Memory Type: DDR3 - * Additional Latancy for PLL: 1 Cycle - */ - ldr r1, =0x00312640 - str r1, [r0, #DMC_MEMCONTROL] - - /* - * Memory Configuration Chip 0 - * Address Mapping: Interleaved - * Number of Column address Bits: 10 bits - * Number of Rows Address Bits: 14 - * Number of Banks: 8 - */ - ldr r1, =0x20e01323 - str r1, [r0, #DMC_MEMCONFIG0] - - /* - * Memory Configuration Chip 1 - * Address Mapping: Interleaved - * Number of Column address Bits: 10 bits - * Number of Rows Address Bits: 14 - * Number of Banks: 8 - */ - ldr r1, =0x40e01323 - str r1, [r0, #DMC_MEMCONFIG1] - - /* Config Precharge Policy */ - ldr r1, =0xff000000 - str r1, [r0, #DMC_PRECHCONFIG] - - /* - * TimingAref, TimingRow, TimingData, TimingPower Setting: - * Values as per Memory AC Parameters - */ - ldr r1, =0x000000BB - str r1, [r0, #DMC_TIMINGAREF] - ldr r1, =0x4046654f - str r1, [r0, #DMC_TIMINGROW] - ldr r1, =0x46400506 - str r1, [r0, #DMC_TIMINGDATA] - ldr r1, =0x52000A3C - str r1, [r0, #DMC_TIMINGPOWER] - - /* Chip0: NOP Command: Assert and Hold CKE to high level */ - ldr r1, =0x07000000 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -2: subs r2, r2, #1 - bne 2b - - /* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */ - ldr r1, =0x00020000 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00030000 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00010002 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00000328 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -3: subs r2, r2, #1 - bne 3b - - /* Chip0: ZQINIT */ - ldr r1, =0x0a000000 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -4: subs r2, r2, #1 - bne 4b - - /* Chip1: NOP Command: Assert and Hold CKE to high level */ - ldr r1, =0x07100000 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -5: subs r2, r2, #1 - bne 5b - - /* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */ - ldr r1, =0x00120000 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00130000 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00110002 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00100328 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -6: subs r2, r2, #1 - bne 6b - - /* Chip1: ZQINIT */ - ldr r1, =0x0a100000 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -7: subs r2, r2, #1 - bne 7b - - ldr r1, =0xe000008e - str r1, [r0, #DMC_PHYCONTROL1] - ldr r1, =0xe0000086 - str r1, [r0, #DMC_PHYCONTROL1] - - /* Wait ?us*/ - mov r2, #0x100000 -8: subs r2, r2, #1 - bne 8b - - /* DREX1 */ - ldr r0, =EXYNOS4_DMC1_BASE @0x10410000 - - /* - * DLL Parameter Setting: - * Termination: Enable R/W - * Phase Delay for DQS Cleaning: 180' Shift - */ - ldr r1, =0xe0000086 - str r1, [r0, #DMC_PHYCONTROL1] - - /* - * ZQ Calibration: - * Termination: Disable - * Auto Calibration Start: Enable - */ - ldr r1, =0xE3855703 - str r1, [r0, #DMC_PHYZQCONTROL] - - /* Wait ?us*/ - mov r2, #0x100000 -1: subs r2, r2, #1 - bne 1b - - /* - * Update DLL Information: - * Force DLL Resyncronization - */ - ldr r1, =0xe000008e - str r1, [r0, #DMC_PHYCONTROL1] - - /* Reset Force DLL Resyncronization */ - ldr r1, =0xe0000086 - str r1, [r0, #DMC_PHYCONTROL1] - - /* Enable Differential DQS, DLL Off*/ - ldr r1, =0x71101008 - str r1, [r0, #DMC_PHYCONTROL0] - - /* Activate PHY DLL: DLL On */ - ldr r1, =0x7110100A - str r1, [r0, #DMC_PHYCONTROL0] - - /* Set DLL Parameters */ - ldr r1, =0xe0000086 - str r1, [r0, #DMC_PHYCONTROL1] - - /* DLL Start */ - ldr r1, =0x7110100B - str r1, [r0, #DMC_PHYCONTROL0] - - ldr r1, =0x00000000 - str r1, [r0, #DMC_PHYCONTROL2] - - /* Set Clock Ratio of Bus clock to Memory Clock */ - ldr r1, =0x0FFF301a - str r1, [r0, #DMC_CONCONTROL] - - /* - * Memor Burst length: 8 - * Number of chips: 2 - * Memory Bus width: 32 bit - * Memory Type: DDR3 - * Additional Latancy for PLL: 1 Cycle - */ - ldr r1, =0x00312640 - str r1, [r0, #DMC_MEMCONTROL] - - /* - * Memory Configuration Chip 0 - * Address Mapping: Interleaved - * Number of Column address Bits: 10 bits - * Number of Rows Address Bits: 14 - * Number of Banks: 8 - */ - ldr r1, =0x20e01323 - str r1, [r0, #DMC_MEMCONFIG0] - - /* - * Memory Configuration Chip 1 - * Address Mapping: Interleaved - * Number of Column address Bits: 10 bits - * Number of Rows Address Bits: 14 - * Number of Banks: 8 - */ - ldr r1, =0x40e01323 - str r1, [r0, #DMC_MEMCONFIG1] - - /* Config Precharge Policy */ - ldr r1, =0xff000000 - str r1, [r0, #DMC_PRECHCONFIG] - - /* - * TimingAref, TimingRow, TimingData, TimingPower Setting: - * Values as per Memory AC Parameters - */ - ldr r1, =0x000000BB - str r1, [r0, #DMC_TIMINGAREF] - ldr r1, =0x4046654f - str r1, [r0, #DMC_TIMINGROW] - ldr r1, =0x46400506 - str r1, [r0, #DMC_TIMINGDATA] - ldr r1, =0x52000A3C - str r1, [r0, #DMC_TIMINGPOWER] - - /* Chip0: NOP Command: Assert and Hold CKE to high level */ - ldr r1, =0x07000000 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -2: subs r2, r2, #1 - bne 2b - - /* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */ - ldr r1, =0x00020000 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00030000 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00010002 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00000328 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -3: subs r2, r2, #1 - bne 3b - - /* Chip 0: ZQINIT */ - ldr r1, =0x0a000000 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -4: subs r2, r2, #1 - bne 4b - - /* Chip1: NOP Command: Assert and Hold CKE to high level */ - ldr r1, =0x07100000 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -5: subs r2, r2, #1 - bne 5b - - /* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */ - ldr r1, =0x00120000 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00130000 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00110002 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00100328 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -6: subs r2, r2, #1 - bne 6b - - /* Chip1: ZQINIT */ - ldr r1, =0x0a100000 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -7: subs r2, r2, #1 - bne 7b - - ldr r1, =0xe000008e - str r1, [r0, #DMC_PHYCONTROL1] - ldr r1, =0xe0000086 - str r1, [r0, #DMC_PHYCONTROL1] - - /* Wait ?us*/ - mov r2, #0x100000 -8: subs r2, r2, #1 - bne 8b - - /* turn on DREX0, DREX1 */ - ldr r0, =EXYNOS4_DMC0_BASE - ldr r1, =0x0FFF303a - str r1, [r0, #DMC_CONCONTROL] - - ldr r0, =EXYNOS4_DMC1_BASE - ldr r1, =0x0FFF303a - str r1, [r0, #DMC_CONCONTROL] - - mov pc, lr diff --git a/board/samsung/origen/mmc_boot.c b/board/samsung/origen/mmc_boot.c deleted file mode 100644 index 072f16146c..0000000000 --- a/board/samsung/origen/mmc_boot.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include<common.h> -#include<config.h> - -/* -* Copy U-boot from mmc to RAM: -* COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains -* Pointer to API (Data transfer from mmc to ram) -*/ -void copy_uboot_to_ram(void) -{ - u32 (*copy_bl2)(u32, u32, u32) = (void *) *(u32 *)COPY_BL2_FNPTR_ADDR; - - copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE); -} - -void board_init_f(unsigned long bootflag) -{ - __attribute__((noreturn)) void (*uboot)(void); - copy_uboot_to_ram(); - - /* Jump to U-Boot image */ - uboot = (void *)CONFIG_SYS_TEXT_BASE; - (*uboot)(); - /* Never returns Here */ -} - -/* Place Holders */ -void board_init_r(gd_t *id, ulong dest_addr) -{ - /* Function attribute is no-return */ - /* This Function never executes */ - while (1) - ; -} - -void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) {} diff --git a/board/samsung/origen/origen.c b/board/samsung/origen/origen.c index 638e7b1edb..b7dbb911b9 100644 --- a/board/samsung/origen/origen.c +++ b/board/samsung/origen/origen.c @@ -25,6 +25,8 @@ #include <asm/arch/cpu.h> #include <asm/arch/gpio.h> #include <asm/arch/mmc.h> +#include <asm/arch/periph.h> +#include <asm/arch/pinmux.h> DECLARE_GLOBAL_DATA_PTR; struct exynos4_gpio_part1 *gpio1; @@ -39,6 +41,50 @@ int board_init(void) return 0; } +static int board_uart_init(void) +{ + int err; + + err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE); + if (err) { + debug("UART0 not configured\n"); + return err; + } + + err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE); + if (err) { + debug("UART1 not configured\n"); + return err; + } + + err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE); + if (err) { + debug("UART2 not configured\n"); + return err; + } + + err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE); + if (err) { + debug("UART3 not configured\n"); + return err; + } + + return 0; +} + +#ifdef CONFIG_BOARD_EARLY_INIT_F +int board_early_init_f(void) +{ + int err; + err = board_uart_init(); + if (err) { + debug("UART init failed\n"); + return err; + } + return err; +} +#endif + int dram_init(void) { gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) diff --git a/board/samsung/origen/origen_setup.h b/board/samsung/origen/origen_setup.h deleted file mode 100644 index 926a4ccc29..0000000000 --- a/board/samsung/origen/origen_setup.h +++ /dev/null @@ -1,607 +0,0 @@ -/* - * Machine Specific Values for ORIGEN board based on S5PV310 - * - * Copyright (C) 2011 Samsung Electronics - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _ORIGEN_SETUP_H -#define _ORIGEN_SETUP_H - -#include <config.h> -#include <version.h> -#include <asm/arch/cpu.h> - -/* Offsets of clock registers (sources and dividers) */ -#define CLK_SRC_CPU_OFFSET 0x14200 -#define CLK_DIV_CPU0_OFFSET 0x14500 -#define CLK_DIV_CPU1_OFFSET 0x14504 - -#define CLK_SRC_DMC_OFFSET 0x10200 -#define CLK_DIV_DMC0_OFFSET 0x10500 -#define CLK_DIV_DMC1_OFFSET 0x10504 - -#define CLK_SRC_TOP0_OFFSET 0xC210 -#define CLK_SRC_TOP1_OFFSET 0xC214 -#define CLK_DIV_TOP_OFFSET 0xC510 - -#define CLK_SRC_LEFTBUS_OFFSET 0x4200 -#define CLK_DIV_LEFTBUS_OFFSET 0x4500 - -#define CLK_SRC_RIGHTBUS_OFFSET 0x8200 -#define CLK_DIV_RIGHTBUS_OFFSET 0x8500 - -#define CLK_SRC_FSYS_OFFSET 0xC240 -#define CLK_DIV_FSYS1_OFFSET 0xC544 -#define CLK_DIV_FSYS2_OFFSET 0xC548 -#define CLK_DIV_FSYS3_OFFSET 0xC54C - -#define CLK_SRC_CAM_OFFSET 0xC220 -#define CLK_SRC_TV_OFFSET 0xC224 -#define CLK_SRC_MFC_OFFSET 0xC228 -#define CLK_SRC_G3D_OFFSET 0xC22C -#define CLK_SRC_LCD0_OFFSET 0xC234 -#define CLK_SRC_PERIL0_OFFSET 0xC250 - -#define CLK_DIV_CAM_OFFSET 0xC520 -#define CLK_DIV_TV_OFFSET 0xC524 -#define CLK_DIV_MFC_OFFSET 0xC528 -#define CLK_DIV_G3D_OFFSET 0xC52C -#define CLK_DIV_LCD0_OFFSET 0xC534 -#define CLK_DIV_PERIL0_OFFSET 0xC550 - -#define CLK_SRC_LCD0_OFFSET 0xC234 - -#define APLL_LOCK_OFFSET 0x14000 -#define MPLL_LOCK_OFFSET 0x14008 -#define APLL_CON0_OFFSET 0x14100 -#define APLL_CON1_OFFSET 0x14104 -#define MPLL_CON0_OFFSET 0x14108 -#define MPLL_CON1_OFFSET 0x1410C - -#define EPLL_LOCK_OFFSET 0xC010 -#define VPLL_LOCK_OFFSET 0xC020 -#define EPLL_CON0_OFFSET 0xC110 -#define EPLL_CON1_OFFSET 0xC114 -#define VPLL_CON0_OFFSET 0xC120 -#define VPLL_CON1_OFFSET 0xC124 - -/* DMC: DRAM Controllor Register offsets */ -#define DMC_CONCONTROL 0x00 -#define DMC_MEMCONTROL 0x04 -#define DMC_MEMCONFIG0 0x08 -#define DMC_MEMCONFIG1 0x0C -#define DMC_DIRECTCMD 0x10 -#define DMC_PRECHCONFIG 0x14 -#define DMC_PHYCONTROL0 0x18 -#define DMC_PHYCONTROL1 0x1C -#define DMC_PHYCONTROL2 0x20 -#define DMC_TIMINGAREF 0x30 -#define DMC_TIMINGROW 0x34 -#define DMC_TIMINGDATA 0x38 -#define DMC_TIMINGPOWER 0x3C -#define DMC_PHYZQCONTROL 0x44 - -/* Bus Configuration Register Address */ -#define ASYNC_CONFIG 0x10010350 - -/* MIU Config Register Offsets*/ -#define APB_SFR_INTERLEAVE_CONF_OFFSET 0x400 -#define APB_SFR_ARBRITATION_CONF_OFFSET 0xC00 - -/* Offset for inform registers */ -#define INFORM0_OFFSET 0x800 -#define INFORM1_OFFSET 0x804 - -/* GPIO Offsets for UART: GPIO Contol Register */ -#define EXYNOS4_GPIO_A0_CON_OFFSET 0x00 -#define EXYNOS4_GPIO_A1_CON_OFFSET 0x20 - -/* UART Register offsets */ -#define ULCON_OFFSET 0x00 -#define UCON_OFFSET 0x04 -#define UFCON_OFFSET 0x08 -#define UBRDIV_OFFSET 0x28 -#define UFRACVAL_OFFSET 0x2C - -/* CLK_SRC_CPU */ -#define MUX_HPM_SEL_MOUTAPLL 0x0 -#define MUX_HPM_SEL_SCLKMPLL 0x1 -#define MUX_CORE_SEL_MOUTAPLL 0x0 -#define MUX_CORE_SEL_SCLKMPLL 0x1 -#define MUX_MPLL_SEL_FILPLL 0x0 -#define MUX_MPLL_SEL_MOUTMPLLFOUT 0x1 -#define MUX_APLL_SEL_FILPLL 0x0 -#define MUX_APLL_SEL_MOUTMPLLFOUT 0x1 -#define CLK_SRC_CPU_VAL ((MUX_HPM_SEL_MOUTAPLL << 20) \ - | (MUX_CORE_SEL_MOUTAPLL << 16) \ - | (MUX_MPLL_SEL_MOUTMPLLFOUT << 8)\ - | (MUX_APLL_SEL_MOUTMPLLFOUT << 0)) - -/* CLK_DIV_CPU0 */ -#define APLL_RATIO 0x0 -#define PCLK_DBG_RATIO 0x1 -#define ATB_RATIO 0x3 -#define PERIPH_RATIO 0x3 -#define COREM1_RATIO 0x7 -#define COREM0_RATIO 0x3 -#define CORE_RATIO 0x0 -#define CLK_DIV_CPU0_VAL ((APLL_RATIO << 24) \ - | (PCLK_DBG_RATIO << 20) \ - | (ATB_RATIO << 16) \ - | (PERIPH_RATIO << 12) \ - | (COREM1_RATIO << 8) \ - | (COREM0_RATIO << 4) \ - | (CORE_RATIO << 0)) - -/* CLK_DIV_CPU1 */ -#define HPM_RATIO 0x0 -#define COPY_RATIO 0x3 -#define CLK_DIV_CPU1_VAL ((HPM_RATIO << 4) | (COPY_RATIO)) - -/* CLK_SRC_DMC */ -#define MUX_PWI_SEL_XXTI 0x0 -#define MUX_PWI_SEL_XUSBXTI 0x1 -#define MUX_PWI_SEL_SCLK_HDMI24M 0x2 -#define MUX_PWI_SEL_SCLK_USBPHY0 0x3 -#define MUX_PWI_SEL_SCLK_USBPHY1 0x4 -#define MUX_PWI_SEL_SCLK_HDMIPHY 0x5 -#define MUX_PWI_SEL_SCLKMPLL 0x6 -#define MUX_PWI_SEL_SCLKEPLL 0x7 -#define MUX_PWI_SEL_SCLKVPLL 0x8 -#define MUX_DPHY_SEL_SCLKMPLL 0x0 -#define MUX_DPHY_SEL_SCLKAPLL 0x1 -#define MUX_DMC_BUS_SEL_SCLKMPLL 0x0 -#define MUX_DMC_BUS_SEL_SCLKAPLL 0x1 -#define CLK_SRC_DMC_VAL ((MUX_PWI_SEL_XUSBXTI << 16) \ - | (MUX_DPHY_SEL_SCLKMPLL << 8) \ - | (MUX_DMC_BUS_SEL_SCLKMPLL << 4)) - -/* CLK_DIV_DMC0 */ -#define CORE_TIMERS_RATIO 0x1 -#define COPY2_RATIO 0x3 -#define DMCP_RATIO 0x1 -#define DMCD_RATIO 0x1 -#define DMC_RATIO 0x1 -#define DPHY_RATIO 0x1 -#define ACP_PCLK_RATIO 0x1 -#define ACP_RATIO 0x3 -#define CLK_DIV_DMC0_VAL ((CORE_TIMERS_RATIO << 28) \ - | (COPY2_RATIO << 24) \ - | (DMCP_RATIO << 20) \ - | (DMCD_RATIO << 16) \ - | (DMC_RATIO << 12) \ - | (DPHY_RATIO << 8) \ - | (ACP_PCLK_RATIO << 4) \ - | (ACP_RATIO << 0)) - -/* CLK_DIV_DMC1 */ -#define DPM_RATIO 0x1 -#define DVSEM_RATIO 0x1 -#define PWI_RATIO 0x1 -#define CLK_DIV_DMC1_VAL ((DPM_RATIO << 24) \ - | (DVSEM_RATIO << 16) \ - | (PWI_RATIO << 8)) - -/* CLK_SRC_TOP0 */ -#define MUX_ONENAND_SEL_ACLK_133 0x0 -#define MUX_ONENAND_SEL_ACLK_160 0x1 -#define MUX_ACLK_133_SEL_SCLKMPLL 0x0 -#define MUX_ACLK_133_SEL_SCLKAPLL 0x1 -#define MUX_ACLK_160_SEL_SCLKMPLL 0x0 -#define MUX_ACLK_160_SEL_SCLKAPLL 0x1 -#define MUX_ACLK_100_SEL_SCLKMPLL 0x0 -#define MUX_ACLK_100_SEL_SCLKAPLL 0x1 -#define MUX_ACLK_200_SEL_SCLKMPLL 0x0 -#define MUX_ACLK_200_SEL_SCLKAPLL 0x1 -#define MUX_VPLL_SEL_FINPLL 0x0 -#define MUX_VPLL_SEL_FOUTVPLL 0x1 -#define MUX_EPLL_SEL_FINPLL 0x0 -#define MUX_EPLL_SEL_FOUTEPLL 0x1 -#define MUX_ONENAND_1_SEL_MOUTONENAND 0x0 -#define MUX_ONENAND_1_SEL_SCLKVPLL 0x1 -#define CLK_SRC_TOP0_VAL ((MUX_ONENAND_SEL_ACLK_133 << 28) \ - | (MUX_ACLK_133_SEL_SCLKMPLL << 24) \ - | (MUX_ACLK_160_SEL_SCLKMPLL << 20) \ - | (MUX_ACLK_100_SEL_SCLKMPLL << 16) \ - | (MUX_ACLK_200_SEL_SCLKMPLL << 12) \ - | (MUX_VPLL_SEL_FINPLL << 8) \ - | (MUX_EPLL_SEL_FINPLL << 4)\ - | (MUX_ONENAND_1_SEL_MOUTONENAND << 0)) - -/* CLK_SRC_TOP1 */ -#define VPLLSRC_SEL_FINPLL 0x0 -#define VPLLSRC_SEL_SCLKHDMI24M 0x1 -#define CLK_SRC_TOP1_VAL (VPLLSRC_SEL_FINPLL) - -/* CLK_DIV_TOP */ -#define ONENAND_RATIO 0x0 -#define ACLK_133_RATIO 0x5 -#define ACLK_160_RATIO 0x4 -#define ACLK_100_RATIO 0x7 -#define ACLK_200_RATIO 0x3 -#define CLK_DIV_TOP_VAL ((ONENAND_RATIO << 16) \ - | (ACLK_133_RATIO << 12)\ - | (ACLK_160_RATIO << 8) \ - | (ACLK_100_RATIO << 4) \ - | (ACLK_200_RATIO << 0)) - -/* CLK_SRC_LEFTBUS */ -#define MUX_GDL_SEL_SCLKMPLL 0x0 -#define MUX_GDL_SEL_SCLKAPLL 0x1 -#define CLK_SRC_LEFTBUS_VAL (MUX_GDL_SEL_SCLKMPLL) - -/* CLK_DIV_LEFTBUS */ -#define GPL_RATIO 0x1 -#define GDL_RATIO 0x3 -#define CLK_DIV_LEFTBUS_VAL ((GPL_RATIO << 4) | (GDL_RATIO)) - -/* CLK_SRC_RIGHTBUS */ -#define MUX_GDR_SEL_SCLKMPLL 0x0 -#define MUX_GDR_SEL_SCLKAPLL 0x1 -#define CLK_SRC_RIGHTBUS_VAL (MUX_GDR_SEL_SCLKMPLL) - -/* CLK_DIV_RIGHTBUS */ -#define GPR_RATIO 0x1 -#define GDR_RATIO 0x3 -#define CLK_DIV_RIGHTBUS_VAL ((GPR_RATIO << 4) | (GDR_RATIO)) - -/* CLK_SRS_FSYS: 6 = SCLKMPLL */ -#define SATA_SEL_SCLKMPLL 0 -#define SATA_SEL_SCLKAPLL 1 - -#define MMC_SEL_XXTI 0 -#define MMC_SEL_XUSBXTI 1 -#define MMC_SEL_SCLK_HDMI24M 2 -#define MMC_SEL_SCLK_USBPHY0 3 -#define MMC_SEL_SCLK_USBPHY1 4 -#define MMC_SEL_SCLK_HDMIPHY 5 -#define MMC_SEL_SCLKMPLL 6 -#define MMC_SEL_SCLKEPLL 7 -#define MMC_SEL_SCLKVPLL 8 - -#define MMCC0_SEL MMC_SEL_SCLKMPLL -#define MMCC1_SEL MMC_SEL_SCLKMPLL -#define MMCC2_SEL MMC_SEL_SCLKMPLL -#define MMCC3_SEL MMC_SEL_SCLKMPLL -#define MMCC4_SEL MMC_SEL_SCLKMPLL -#define CLK_SRC_FSYS_VAL ((SATA_SEL_SCLKMPLL << 24) \ - | (MMCC4_SEL << 16) \ - | (MMCC3_SEL << 12) \ - | (MMCC2_SEL << 8) \ - | (MMCC1_SEL << 4) \ - | (MMCC0_SEL << 0)) - -/* SCLK_MMC[0-4] = MOUTMMC[0-4]/(MMC[0-4]_RATIO + 1)/(MMC[0-4]_PRE_RATIO +1) */ -/* CLK_DIV_FSYS1 */ -#define MMC0_RATIO 0xF -#define MMC0_PRE_RATIO 0x0 -#define MMC1_RATIO 0xF -#define MMC1_PRE_RATIO 0x0 -#define CLK_DIV_FSYS1_VAL ((MMC1_PRE_RATIO << 24) \ - | (MMC1_RATIO << 16) \ - | (MMC0_PRE_RATIO << 8) \ - | (MMC0_RATIO << 0)) - -/* CLK_DIV_FSYS2 */ -#define MMC2_RATIO 0xF -#define MMC2_PRE_RATIO 0x0 -#define MMC3_RATIO 0xF -#define MMC3_PRE_RATIO 0x0 -#define CLK_DIV_FSYS2_VAL ((MMC3_PRE_RATIO << 24) \ - | (MMC3_RATIO << 16) \ - | (MMC2_PRE_RATIO << 8) \ - | (MMC2_RATIO << 0)) - -/* CLK_DIV_FSYS3 */ -#define MMC4_RATIO 0xF -#define MMC4_PRE_RATIO 0x0 -#define CLK_DIV_FSYS3_VAL ((MMC4_PRE_RATIO << 8) \ - | (MMC4_RATIO << 0)) - -/* CLK_SRC_PERIL0 */ -#define UART_SEL_XXTI 0 -#define UART_SEL_XUSBXTI 1 -#define UART_SEL_SCLK_HDMI24M 2 -#define UART_SEL_SCLK_USBPHY0 3 -#define UART_SEL_SCLK_USBPHY1 4 -#define UART_SEL_SCLK_HDMIPHY 5 -#define UART_SEL_SCLKMPLL 6 -#define UART_SEL_SCLKEPLL 7 -#define UART_SEL_SCLKVPLL 8 - -#define UART0_SEL UART_SEL_SCLKMPLL -#define UART1_SEL UART_SEL_SCLKMPLL -#define UART2_SEL UART_SEL_SCLKMPLL -#define UART3_SEL UART_SEL_SCLKMPLL -#define UART4_SEL UART_SEL_SCLKMPLL -#define CLK_SRC_PERIL0_VAL ((UART4_SEL << 16) \ - | (UART3_SEL << 12) \ - | (UART2_SEL << 8) \ - | (UART1_SEL << 4) \ - | (UART0_SEL << 0)) - -/* SCLK_UART[0-4] = MOUTUART[0-4]/(UART[0-4]_RATIO + 1) */ -/* CLK_DIV_PERIL0 */ -#define UART0_RATIO 7 -#define UART1_RATIO 7 -#define UART2_RATIO 7 -#define UART3_RATIO 7 -#define UART4_RATIO 7 -#define CLK_DIV_PERIL0_VAL ((UART4_RATIO << 16) \ - | (UART3_RATIO << 12) \ - | (UART2_RATIO << 8) \ - | (UART1_RATIO << 4) \ - | (UART0_RATIO << 0)) - -/* Clock Source CAM/FIMC */ -/* CLK_SRC_CAM */ -#define CAM0_SEL_XUSBXTI 1 -#define CAM1_SEL_XUSBXTI 1 -#define CSIS0_SEL_XUSBXTI 1 -#define CSIS1_SEL_XUSBXTI 1 - -#define FIMC_SEL_SCLKMPLL 6 -#define FIMC0_LCLK_SEL FIMC_SEL_SCLKMPLL -#define FIMC1_LCLK_SEL FIMC_SEL_SCLKMPLL -#define FIMC2_LCLK_SEL FIMC_SEL_SCLKMPLL -#define FIMC3_LCLK_SEL FIMC_SEL_SCLKMPLL - -#define CLK_SRC_CAM_VAL ((CSIS1_SEL_XUSBXTI << 28) \ - | (CSIS0_SEL_XUSBXTI << 24) \ - | (CAM1_SEL_XUSBXTI << 20) \ - | (CAM0_SEL_XUSBXTI << 16) \ - | (FIMC3_LCLK_SEL << 12) \ - | (FIMC2_LCLK_SEL << 8) \ - | (FIMC1_LCLK_SEL << 4) \ - | (FIMC0_LCLK_SEL << 0)) - -/* SCLK CAM */ -/* CLK_DIV_CAM */ -#define FIMC0_LCLK_RATIO 4 -#define FIMC1_LCLK_RATIO 4 -#define FIMC2_LCLK_RATIO 4 -#define FIMC3_LCLK_RATIO 4 -#define CLK_DIV_CAM_VAL ((FIMC3_LCLK_RATIO << 12) \ - | (FIMC2_LCLK_RATIO << 8) \ - | (FIMC1_LCLK_RATIO << 4) \ - | (FIMC0_LCLK_RATIO << 0)) - -/* SCLK MFC */ -/* CLK_SRC_MFC */ -#define MFC_SEL_MPLL 0 -#define MOUTMFC_0 0 -#define MFC_SEL MOUTMFC_0 -#define MFC_0_SEL MFC_SEL_MPLL -#define CLK_SRC_MFC_VAL ((MFC_SEL << 8) | (MFC_0_SEL)) - - -/* CLK_DIV_MFC */ -#define MFC_RATIO 3 -#define CLK_DIV_MFC_VAL (MFC_RATIO) - -/* SCLK G3D */ -/* CLK_SRC_G3D */ -#define G3D_SEL_MPLL 0 -#define MOUTG3D_0 0 -#define G3D_SEL MOUTG3D_0 -#define G3D_0_SEL G3D_SEL_MPLL -#define CLK_SRC_G3D_VAL ((G3D_SEL << 8) | (G3D_0_SEL)) - -/* CLK_DIV_G3D */ -#define G3D_RATIO 1 -#define CLK_DIV_G3D_VAL (G3D_RATIO) - -/* SCLK LCD0 */ -/* CLK_SRC_LCD0 */ -#define FIMD_SEL_SCLKMPLL 6 -#define MDNIE0_SEL_XUSBXTI 1 -#define MDNIE_PWM0_SEL_XUSBXTI 1 -#define MIPI0_SEL_XUSBXTI 1 -#define CLK_SRC_LCD0_VAL ((MIPI0_SEL_XUSBXTI << 12) \ - | (MDNIE_PWM0_SEL_XUSBXTI << 8) \ - | (MDNIE0_SEL_XUSBXTI << 4) \ - | (FIMD_SEL_SCLKMPLL << 0)) - -/* CLK_DIV_LCD0 */ -#define FIMD0_RATIO 4 -#define CLK_DIV_LCD0_VAL (FIMD0_RATIO) - -/* Required period to generate a stable clock output */ -/* PLL_LOCK_TIME */ -#define PLL_LOCKTIME 0x1C20 - -/* PLL Values */ -#define DISABLE 0 -#define ENABLE 1 -#define SET_PLL(mdiv, pdiv, sdiv) ((ENABLE << 31)\ - | (mdiv << 16) \ - | (pdiv << 8) \ - | (sdiv << 0)) - -/* APLL_CON0 */ -#define APLL_MDIV 0xFA -#define APLL_PDIV 0x6 -#define APLL_SDIV 0x1 -#define APLL_CON0_VAL SET_PLL(APLL_MDIV, APLL_PDIV, APLL_SDIV) - -/* APLL_CON1 */ -#define APLL_AFC_ENB 0x1 -#define APLL_AFC 0xC -#define APLL_CON1_VAL ((APLL_AFC_ENB << 31) | (APLL_AFC << 0)) - -/* MPLL_CON0 */ -#define MPLL_MDIV 0xC8 -#define MPLL_PDIV 0x6 -#define MPLL_SDIV 0x1 -#define MPLL_CON0_VAL SET_PLL(MPLL_MDIV, MPLL_PDIV, MPLL_SDIV) - -/* MPLL_CON1 */ -#define MPLL_AFC_ENB 0x0 -#define MPLL_AFC 0x1C -#define MPLL_CON1_VAL ((MPLL_AFC_ENB << 31) | (MPLL_AFC << 0)) - -/* EPLL_CON0 */ -#define EPLL_MDIV 0x30 -#define EPLL_PDIV 0x3 -#define EPLL_SDIV 0x2 -#define EPLL_CON0_VAL SET_PLL(EPLL_MDIV, EPLL_PDIV, EPLL_SDIV) - -/* EPLL_CON1 */ -#define EPLL_K 0x0 -#define EPLL_CON1_VAL (EPLL_K >> 0) - -/* VPLL_CON0 */ -#define VPLL_MDIV 0x35 -#define VPLL_PDIV 0x3 -#define VPLL_SDIV 0x2 -#define VPLL_CON0_VAL SET_PLL(VPLL_MDIV, VPLL_PDIV, VPLL_SDIV) - -/* VPLL_CON1 */ -#define VPLL_SSCG_EN DISABLE -#define VPLL_SEL_PF_DN_SPREAD 0x0 -#define VPLL_MRR 0x11 -#define VPLL_MFR 0x0 -#define VPLL_K 0x400 -#define VPLL_CON1_VAL ((VPLL_SSCG_EN << 31)\ - | (VPLL_SEL_PF_DN_SPREAD << 29) \ - | (VPLL_MRR << 24) \ - | (VPLL_MFR << 16) \ - | (VPLL_K << 0)) -/* - * UART GPIO_A0/GPIO_A1 Control Register Value - * 0x2: UART Function - */ -#define EXYNOS4_GPIO_A0_CON_VAL 0x22222222 -#define EXYNOS4_GPIO_A1_CON_VAL 0x222222 - -/* ULCON: UART Line Control Value 8N1 */ -#define WORD_LEN_5_BIT 0x00 -#define WORD_LEN_6_BIT 0x01 -#define WORD_LEN_7_BIT 0x02 -#define WORD_LEN_8_BIT 0x03 - -#define STOP_BIT_1 0x00 -#define STOP_BIT_2 0x01 - -#define NO_PARITY 0x00 -#define ODD_PARITY 0x4 -#define EVEN_PARITY 0x5 -#define FORCED_PARITY_CHECK_AS_1 0x6 -#define FORCED_PARITY_CHECK_AS_0 0x7 - -#define INFRAMODE_NORMAL 0x00 -#define INFRAMODE_INFRARED 0x01 - -#define ULCON_VAL ((INFRAMODE_NORMAL << 6) \ - | (NO_PARITY << 3) \ - | (STOP_BIT_1 << 2) \ - | (WORD_LEN_8_BIT << 0)) - -/* - * UCON: UART Control Value - * Tx_interrupt Type: Level - * Rx_interrupt Type: Level - * Rx Timeout Enabled: Yes - * Rx-Error Atatus_Int Enable: Yes - * Loop_Back: No - * Break Signal: No - * Transmit mode : Interrupt request/polling - * Receive mode : Interrupt request/polling - */ -#define TX_PULSE_INTERRUPT 0 -#define TX_LEVEL_INTERRUPT 1 -#define RX_PULSE_INTERRUPT 0 -#define RX_LEVEL_INTERRUPT 1 - -#define RX_TIME_OUT ENABLE -#define RX_ERROR_STATE_INT_ENB ENABLE -#define LOOP_BACK DISABLE -#define BREAK_SIGNAL DISABLE - -#define TX_MODE_DISABLED 0X00 -#define TX_MODE_IRQ_OR_POLL 0X01 -#define TX_MODE_DMA 0X02 - -#define RX_MODE_DISABLED 0X00 -#define RX_MODE_IRQ_OR_POLL 0X01 -#define RX_MODE_DMA 0X02 - -#define UCON_VAL ((TX_LEVEL_INTERRUPT << 9) \ - | (RX_LEVEL_INTERRUPT << 8) \ - | (RX_TIME_OUT << 7) \ - | (RX_ERROR_STATE_INT_ENB << 6) \ - | (LOOP_BACK << 5) \ - | (BREAK_SIGNAL << 4) \ - | (TX_MODE_IRQ_OR_POLL << 2) \ - | (RX_MODE_IRQ_OR_POLL << 0)) - -/* - * UFCON: UART FIFO Control Value - * Tx FIFO Trigger LEVEL: 2 Bytes (001) - * Rx FIFO Trigger LEVEL: 2 Bytes (001) - * Tx Fifo Reset: No - * Rx Fifo Reset: No - * FIFO Enable: Yes - */ -#define TX_FIFO_TRIGGER_LEVEL_0_BYTES 0x00 -#define TX_FIFO_TRIGGER_LEVEL_2_BYTES 0x1 -#define TX_FIFO_TRIGGER_LEVEL_4_BYTES 0x2 -#define TX_FIFO_TRIGGER_LEVEL_6_BYTES 0x3 -#define TX_FIFO_TRIGGER_LEVEL_8_BYTES 0x4 -#define TX_FIFO_TRIGGER_LEVEL_10_BYTES 0x5 -#define TX_FIFO_TRIGGER_LEVEL_12_BYTES 0x6 -#define TX_FIFO_TRIGGER_LEVEL_14_BYTES 0x7 - -#define RX_FIFO_TRIGGER_LEVEL_2_BYTES 0x0 -#define RX_FIFO_TRIGGER_LEVEL_4_BYTES 0x1 -#define RX_FIFO_TRIGGER_LEVEL_6_BYTES 0x2 -#define RX_FIFO_TRIGGER_LEVEL_8_BYTES 0x3 -#define RX_FIFO_TRIGGER_LEVEL_10_BYTES 0x4 -#define RX_FIFO_TRIGGER_LEVEL_12_BYTES 0x5 -#define RX_FIFO_TRIGGER_LEVEL_14_BYTES 0x6 -#define RX_FIFO_TRIGGER_LEVEL_16_BYTES 0x7 - -#define TX_FIFO_TRIGGER_LEVEL TX_FIFO_TRIGGER_LEVEL_2_BYTES -#define RX_FIFO_TRIGGER_LEVEL RX_FIFO_TRIGGER_LEVEL_4_BYTES -#define TX_FIFO_RESET DISABLE -#define RX_FIFO_RESET DISABLE -#define FIFO_ENABLE ENABLE -#define UFCON_VAL ((TX_FIFO_TRIGGER_LEVEL << 8) \ - | (RX_FIFO_TRIGGER_LEVEL << 4) \ - | (TX_FIFO_RESET << 2) \ - | (RX_FIFO_RESET << 1) \ - | (FIFO_ENABLE << 0)) -/* - * Baud Rate Division Value - * 115200 BAUD: - * UBRDIV_VAL = SCLK_UART/((115200 * 16) - 1) - * UBRDIV_VAL = (800 MHz)/((115200 * 16) - 1) - */ -#define UBRDIV_VAL 0x35 - -/* - * Fractional Part of Baud Rate Divisor: - * 115200 BAUD: - * UBRFRACVAL = ((((SCLK_UART*10/(115200*16) -10))%10)*16/10) - * UBRFRACVAL = ((((800MHz*10/(115200*16) -10))%10)*16/10) - */ -#define UFRACVAL_VAL 0x4 -#endif |
