1 files changed, 131 insertions, 0 deletions
diff --git a/board/freescale/c29xpcie/cpld.c b/board/freescale/c29xpcie/cpld.c
new file mode 100644
index 0000000000..5cbccff633
--- /dev/null
+++ b/board/freescale/c29xpcie/cpld.c
@@ -0,0 +1,131 @@
+/**
+ * Copyright 2013 Freescale Semiconductor
+ * Author: Mingkai Hu <Mingkai.hu@freescale.com>
+ *         Po Liu <Po.Liu@freescale.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * This file provides support for the board-specific CPLD used on some Freescale
+ * reference boards.
+ *
+ * The following macros need to be defined:
+ *
+ * CONFIG_SYS_CPLD_BASE - The virtual address of the base of the
+ * CPLD register map
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/io.h>
+
+#include "cpld.h"
+/**
+ * Set the boot bank to the alternate bank
+ */
+void cpld_set_altbank(u8 banksel)
+{
+	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
+	u8 reg11;
+
+	reg11 = in_8(&cpld_data->flhcsr);
+
+	switch (banksel) {
+	case 1:
+		out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK)
+			| CPLD_BANKSEL_EN | CPLD_SELECT_BANK1);
+		break;
+	case 2:
+		out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK)
+			| CPLD_BANKSEL_EN | CPLD_SELECT_BANK2);
+		break;
+	case 3:
+		out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK)
+			| CPLD_BANKSEL_EN | CPLD_SELECT_BANK3);
+		break;
+	case 4:
+		out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK)
+			| CPLD_BANKSEL_EN | CPLD_SELECT_BANK4);
+		break;
+	default:
+		printf("Invalid value! [1-4]\n");
+		return;
+	}
+
+	udelay(100);
+	do_reset(NULL, 0, 0, NULL);
+}
+
+/**
+ * Set the boot bank to the default bank
+ */
+void cpld_set_defbank(void)
+{
+	cpld_set_altbank(4);
+}
+
+#ifdef DEBUG
+static void cpld_dump_regs(void)
+{
+	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
+
+	printf("chipid1		= 0x%02x\n", in_8(&cpld_data->chipid1));
+	printf("chipid2		= 0x%02x\n", in_8(&cpld_data->chipid2));
+	printf("hwver		= 0x%02x\n", in_8(&cpld_data->hwver));
+	printf("cpldver		= 0x%02x\n", in_8(&cpld_data->cpldver));
+	printf("rstcon		= 0x%02x\n", in_8(&cpld_data->rstcon));
+	printf("flhcsr		= 0x%02x\n", in_8(&cpld_data->flhcsr));
+	printf("wdcsr		= 0x%02x\n", in_8(&cpld_data->wdcsr));
+	printf("wdkick		= 0x%02x\n", in_8(&cpld_data->wdkick));
+	printf("fancsr		= 0x%02x\n", in_8(&cpld_data->fancsr));
+	printf("ledcsr		= 0x%02x\n", in_8(&cpld_data->ledcsr));
+	printf("misc		= 0x%02x\n", in_8(&cpld_data->misccsr));
+	printf("bootor		= 0x%02x\n", in_8(&cpld_data->bootor));
+	printf("bootcfg1	= 0x%02x\n", in_8(&cpld_data->bootcfg1));
+	printf("bootcfg2	= 0x%02x\n", in_8(&cpld_data->bootcfg2));
+	printf("bootcfg3	= 0x%02x\n", in_8(&cpld_data->bootcfg3));
+	printf("bootcfg4	= 0x%02x\n", in_8(&cpld_data->bootcfg4));
+	putc('\n');
+}
+#endif
+
+int cpld_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	int rc = 0;
+	unsigned char value;
+
+	if (argc <= 1)
+		return cmd_usage(cmdtp);
+
+	if (strcmp(argv[1], "reset") == 0) {
+		if (!strcmp(argv[2], "altbank") && argv[3]) {
+			value = (u8)simple_strtoul(argv[3], NULL, 16);
+			cpld_set_altbank(value);
+		} else if (!argv[2])
+			cpld_set_defbank();
+		else
+			cmd_usage(cmdtp);
+#ifdef DEBUG
+	} else if (strcmp(argv[1], "dump") == 0) {
+		cpld_dump_regs();
+#endif
+	} else
+		rc = cmd_usage(cmdtp);
+
+	return rc;
+}
+
+U_BOOT_CMD(
+	cpld_cmd, CONFIG_SYS_MAXARGS, 1, cpld_cmd,
+	"Reset the board using the CPLD sequencer",
+	"reset - hard reset to default bank 4\n"
+	"cpld_cmd reset altbank [bank]- reset to alternate bank\n"
+	"	- [bank] bank value select 1-4\n"
+	"	- bank 1 on the flash 0x0000000~0x0ffffff\n"
+	"	- bank 2 on the flash 0x1000000~0x1ffffff\n"
+	"	- bank 3 on the flash 0x2000000~0x2ffffff\n"
+	"	- bank 4 on the flash 0x3000000~0x3ffffff\n"
+#ifdef DEBUG
+	"cpld_cmd dump - display the CPLD registers\n"
+#endif
+	);