diff options
Diffstat (limited to 'board/esd/cpci405/cpci405.c')
| -rw-r--r-- | board/esd/cpci405/cpci405.c | 115 |
1 files changed, 83 insertions, 32 deletions
diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c index 2dda8fabbd..dc498d5ec7 100644 --- a/board/esd/cpci405/cpci405.c +++ b/board/esd/cpci405/cpci405.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2001 + * (C) Copyright 2001-2003 * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com * * See file CREDITS for list of people who contributed to this @@ -50,7 +50,7 @@ const unsigned char fpgadata[] = /* Prototypes */ -int version2(void); +int cpci405_version(void); int gunzip(void *, int, unsigned char *, int *); @@ -83,7 +83,7 @@ int board_pre_init (void) * Boot onboard FPGA */ #ifndef CONFIG_CPCI405_VER2 - if (!version2()) { + if (cpci405_version() == 1) { status = fpga_boot((unsigned char *)fpgadata, sizeof(fpgadata)); if (status != 0) { /* booting FPGA failed */ @@ -144,7 +144,11 @@ int board_pre_init (void) mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ mtdcr(uicer, 0x00000000); /* disable all ints */ mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ - mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */ + if (cpci405_version() == 3) { + mtdcr(uicpr, 0xFFFFFF99); /* set int polarities */ + } else { + mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */ + } mtdcr(uictr, 0x10000000); /* set int trigger levels */ mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ @@ -178,29 +182,43 @@ int cpci405_host(void) } -int version2(void) +int cpci405_version(void) { unsigned long cntrl0Reg; unsigned long value; /* - * Setup GPIO pins (CS2/GPIO11 as GPIO) + * Setup GPIO pins (CS2/GPIO11 and CS3/GPIO12 as GPIO) */ cntrl0Reg = mfdcr(cntrl0); - mtdcr(cntrl0, cntrl0Reg | 0x02000000); - + mtdcr(cntrl0, cntrl0Reg | 0x03000000); + out32(IBM405GP_GPIO0_ODR, in32(IBM405GP_GPIO0_ODR) & ~0x00180000); + out32(IBM405GP_GPIO0_TCR, in32(IBM405GP_GPIO0_TCR) & ~0x00180000); udelay(1000); /* wait some time before reading input */ - value = in32(IBM405GP_GPIO0_IR) & 0x00100000; /* test GPIO11 */ + value = in32(IBM405GP_GPIO0_IR) & 0x00180000; /* get config bits */ /* - * Setup GPIO pins (CS2/GPIO11 as CS again) + * Restore GPIO settings */ mtdcr(cntrl0, cntrl0Reg); - if (value) - return 0; /* no, board is version 1.x */ - else - return -1; /* yes, board is version 2.x */ + switch (value) { + case 0x00180000: + /* CS2==1 && CS3==1 -> version 1 */ + return 1; + case 0x00080000: + /* CS2==0 && CS3==1 -> version 2 */ + return 2; + case 0x00100000: + /* CS2==1 && CS3==0 -> version 3 */ + return 3; + case 0x00000000: + /* CS2==0 && CS3==0 -> version 4 */ + return 4; + default: + /* should not be reached! */ + return 2; + } } @@ -230,7 +248,7 @@ int misc_init_r (void) * FPGA can be gzip compressed (malloc) and booted this late. */ - if (version2()) { + if (cpci405_version() >= 2) { /* * Setup GPIO pins (CS6+CS7 as GPIO) */ @@ -291,11 +309,41 @@ int misc_init_r (void) putc ('\n'); free(dst); + + /* + * Reset FPGA via FPGA_DATA pin + */ + SET_FPGA(FPGA_PRG | FPGA_CLK); + udelay(1000); /* wait 1ms */ + SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA); + udelay(1000); /* wait 1ms */ + + if (cpci405_version() == 3) { + volatile unsigned short *fpga_mode = (unsigned short *)CFG_FPGA_BASE_ADDR; + volatile unsigned char *leds = (unsigned char *)CFG_LED_ADDR; + + /* + * Enable outputs in fpga on version 3 board + */ + *fpga_mode |= CFG_FPGA_MODE_ENABLE_OUTPUT; + + /* + * Set outputs to 0 + */ + *leds = 0x00; + + /* + * Reset external DUART + */ + *fpga_mode |= CFG_FPGA_MODE_DUART_RESET; + udelay(100); + *fpga_mode &= ~(CFG_FPGA_MODE_DUART_RESET); + } } else { - printf("\n*** U-Boot Version does not match Board Version!\n"); - printf("*** CPCI-405 Version 2.x detected!\n"); - printf("*** Please use correct U-Boot version (CPCI4052)!\n\n"); + puts("\n*** U-Boot Version does not match Board Version!\n"); + puts("*** CPCI-405 Version 1.x detected!\n"); + puts("*** Please use correct U-Boot version (CPCI405 instead of CPCI4052)!\n\n"); } #else /* CONFIG_CPCI405_VER2 */ @@ -321,10 +369,10 @@ int misc_init_r (void) } } - if (version2()) { - printf("\n*** U-Boot Version does not match Board Version!\n"); - printf("*** CPCI-405 Board Version 1.x detected!\n"); - printf("*** Please use correct U-Boot version (CPCI405)!\n\n"); + if (cpci405_version() >= 2) { + puts("\n*** U-Boot Version does not match Board Version!\n"); + puts("*** CPCI-405 Board Version 2.x detected!\n"); + puts("*** Please use correct U-Boot version (CPCI4052 instead of CPCI405)!\n\n"); } #endif /* CONFIG_CPCI405_VER2 */ @@ -350,6 +398,7 @@ int checkboard (void) #endif unsigned char str[64]; int i = getenv_r ("serial#", str, sizeof(str)); + unsigned short ver; puts ("Board: "); @@ -359,17 +408,19 @@ int checkboard (void) puts(str); } - if (version2()) - puts (" (Ver 2.x, "); - else - puts (" (Ver 1.x, "); + ver = cpci405_version(); + printf(" (Ver %d.x, ", ver); -#if 0 - if ((*(unsigned short *)((unsigned long)CFG_FPGA_BASE_ADDR) + CFG_FPGA_STATUS) - & CFG_FPGA_STATUS_FLASH) - puts ("FLASH Bank A, "); - else - puts ("FLASH Bank B, "); +#if 0 /* test-only */ + if (ver >= 2) { + volatile u16 *fpga_status = (u16 *)CFG_FPGA_BASE_ADDR + 1; + + if (*fpga_status & CFG_FPGA_STATUS_FLASH) { + puts ("FLASH Bank B, "); + } else { + puts ("FLASH Bank A, "); + } + } #endif if (ctermm2()) { |
