diff options
Diffstat (limited to 'board/amcc/yosemite/yosemite.c')
| -rw-r--r-- | board/amcc/yosemite/yosemite.c | 62 |
1 files changed, 31 insertions, 31 deletions
diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c index 2a654fa895..1ec13eb6b5 100644 --- a/board/amcc/yosemite/yosemite.c +++ b/board/amcc/yosemite/yosemite.c @@ -82,21 +82,21 @@ int board_early_init_f(void) /*-------------------------------------------------------------------- * Setup the interrupt controller polarities, triggers, etc. *-------------------------------------------------------------------*/ - mtdcr(uic0sr, 0xffffffff); /* clear all */ - mtdcr(uic0er, 0x00000000); /* disable all */ - mtdcr(uic0cr, 0x00000009); /* ATI & UIC1 crit are critical */ - mtdcr(uic0pr, 0xfffffe13); /* per ref-board manual */ - mtdcr(uic0tr, 0x01c00008); /* per ref-board manual */ - mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr(uic0sr, 0xffffffff); /* clear all */ - - mtdcr(uic1sr, 0xffffffff); /* clear all */ - mtdcr(uic1er, 0x00000000); /* disable all */ - mtdcr(uic1cr, 0x00000000); /* all non-critical */ - mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */ - mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */ - mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr(uic1sr, 0xffffffff); /* clear all */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ + mtdcr(UIC0ER, 0x00000000); /* disable all */ + mtdcr(UIC0CR, 0x00000009); /* ATI & UIC1 crit are critical */ + mtdcr(UIC0PR, 0xfffffe13); /* per ref-board manual */ + mtdcr(UIC0TR, 0x01c00008); /* per ref-board manual */ + mtdcr(UIC0VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ + + mtdcr(UIC1SR, 0xffffffff); /* clear all */ + mtdcr(UIC1ER, 0x00000000); /* disable all */ + mtdcr(UIC1CR, 0x00000000); /* all non-critical */ + mtdcr(UIC1PR, 0xffffe0ff); /* per ref-board manual */ + mtdcr(UIC1TR, 0x00ffc000); /* per ref-board manual */ + mtdcr(UIC1VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ /*-------------------------------------------------------------------- * Setup other serial configuration @@ -237,7 +237,7 @@ void sdram_tr1_set(int ram_address, int* tr1_value) /* go through all possible SDRAM0_TR1[RDCT] values */ for (i=0; i<=0x1ff; i++) { /* set the current value for TR1 */ - mtsdram(mem_tr1, (0x80800800 | i)); + mtsdram(SDRAM0_TR1, (0x80800800 | i)); /* write values */ for (j=0; j<NUM_TRIES; j++) { @@ -289,15 +289,15 @@ phys_size_t initdram(int board) /*-------------------------------------------------------------------- * Setup some default *------------------------------------------------------------------*/ - mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */ - mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */ - mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */ - mtsdram(mem_clktr, 0x40000000); /* ?? */ - mtsdram(mem_wddctr, 0x40000000); /* ?? */ + mtsdram(SDRAM0_UABBA, 0x00000000); /* ubba=0 (default) */ + mtsdram(SDRAM0_SLIO, 0x00000000); /* rdre=0 wrre=0 rarw=0 */ + mtsdram(SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal) */ + mtsdram(SDRAM0_CLKTR, 0x40000000); /* ?? */ + mtsdram(SDRAM0_WDDCTR, 0x40000000); /* ?? */ /*clear this first, if the DDR is enabled by a debugger then you can not make changes. */ - mtsdram(mem_cfg0, 0x00000000); /* Disable EEC */ + mtsdram(SDRAM0_CFG0, 0x00000000); /* Disable EEC */ /*-------------------------------------------------------------------- * Setup for board-specific specific mem @@ -305,29 +305,29 @@ phys_size_t initdram(int board) /* * Following for CAS Latency = 2.5 @ 133 MHz PLB */ - mtsdram(mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */ - mtsdram(mem_b1cr, 0x080a4001); /* SDBA=0x080 128MB, Mode 3, enabled */ + mtsdram(SDRAM0_B0CR, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */ + mtsdram(SDRAM0_B1CR, 0x080a4001); /* SDBA=0x080 128MB, Mode 3, enabled */ - mtsdram(mem_tr0, 0x410a4012); /* ?? */ - mtsdram(mem_rtr, 0x04080000); /* ?? */ - mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */ - mtsdram(mem_cfg0, 0x30000000); /* Disable EEC */ + mtsdram(SDRAM0_TR0, 0x410a4012); /* ?? */ + mtsdram(SDRAM0_RTR, 0x04080000); /* ?? */ + mtsdram(SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM */ + mtsdram(SDRAM0_CFG0, 0x30000000); /* Disable EEC */ udelay(400); /* Delay 200 usecs (min) */ /*-------------------------------------------------------------------- * Enable the controller, then wait for DCEN to complete *------------------------------------------------------------------*/ - mtsdram(mem_cfg0, 0x80000000); /* Enable */ + mtsdram(SDRAM0_CFG0, 0x80000000); /* Enable */ for (;;) { - mfsdram(mem_mcsts, reg); + mfsdram(SDRAM0_MCSTS, reg); if (reg & 0x80000000) break; } sdram_tr1_set(0x00000000, &tr1_bank1); sdram_tr1_set(0x08000000, &tr1_bank2); - mtsdram(mem_tr1, (((tr1_bank1+tr1_bank2)/2) | 0x80800800)); + mtsdram(SDRAM0_TR1, (((tr1_bank1+tr1_bank2)/2) | 0x80800800)); return CONFIG_SYS_SDRAM_BANKS * (CONFIG_SYS_KBYTES_SDRAM * 1024); /* return bytes */ } |
