diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/cpu/armv7/am33xx/sys_info.c | 57 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-am33xx/clocks_am33xx.h | 10 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-am33xx/sys_proto.h | 3 |
3 files changed, 69 insertions, 1 deletions
diff --git a/arch/arm/cpu/armv7/am33xx/sys_info.c b/arch/arm/cpu/armv7/am33xx/sys_info.c index 63afaaa328..50eb598ff2 100644 --- a/arch/arm/cpu/armv7/am33xx/sys_info.c +++ b/arch/arm/cpu/armv7/am33xx/sys_info.c @@ -17,6 +17,7 @@ #include <asm/arch/sys_proto.h> #include <asm/arch/cpu.h> #include <asm/arch/clock.h> +#include <power/tps65910.h> struct ctrl_stat *cstat = (struct ctrl_stat *)CTRL_BASE; @@ -119,3 +120,59 @@ int print_cpuinfo(void) return 0; } #endif /* CONFIG_DISPLAY_CPUINFO */ + +#ifdef CONFIG_AM33XX +int am335x_get_efuse_mpu_max_freq(struct ctrl_dev *cdev) +{ + int sil_rev; + + sil_rev = readl(&cdev->deviceid) >> 28; + + if (sil_rev == 1) + /* PG 2.0, efuse may not be set. */ + return MPUPLL_M_800; + else if (sil_rev >= 2) { + /* Check what the efuse says our max speed is. */ + int efuse_arm_mpu_max_freq; + efuse_arm_mpu_max_freq = readl(&cdev->efuse_sma); + switch ((efuse_arm_mpu_max_freq & DEVICE_ID_MASK)) { + case AM335X_ZCZ_1000: + return MPUPLL_M_1000; + case AM335X_ZCZ_800: + return MPUPLL_M_800; + case AM335X_ZCZ_720: + return MPUPLL_M_720; + case AM335X_ZCZ_600: + case AM335X_ZCE_600: + return MPUPLL_M_600; + case AM335X_ZCZ_300: + case AM335X_ZCE_300: + return MPUPLL_M_300; + } + } + + /* PG 1.0 or otherwise unknown, use the PG1.0 max */ + return MPUPLL_M_720; +} + +int am335x_get_tps65910_mpu_vdd(int sil_rev, int frequency) +{ + /* For PG2.1 and later, we have one set of values. */ + if (sil_rev >= 2) { + switch (frequency) { + case MPUPLL_M_1000: + return TPS65910_OP_REG_SEL_1_3_2_5; + case MPUPLL_M_800: + return TPS65910_OP_REG_SEL_1_2_6; + case MPUPLL_M_720: + return TPS65910_OP_REG_SEL_1_2_0; + case MPUPLL_M_600: + case MPUPLL_M_300: + return TPS65910_OP_REG_SEL_1_1_3; + } + } + + /* Default to PG1.0/PG2.0 values. */ + return TPS65910_OP_REG_SEL_1_1_3; +} +#endif diff --git a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h index 140379fb38..aad698ddfe 100644 --- a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h +++ b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h @@ -11,9 +11,17 @@ #ifndef _CLOCKS_AM33XX_H_ #define _CLOCKS_AM33XX_H_ +/* MAIN PLL Fdll supported frequencies */ +#define MPUPLL_M_1000 1000 +#define MPUPLL_M_800 800 +#define MPUPLL_M_720 720 +#define MPUPLL_M_600 600 +#define MPUPLL_M_550 550 +#define MPUPLL_M_300 300 + /* MAIN PLL Fdll = 550 MHz, by default */ #ifndef CONFIG_SYS_MPUCLK -#define CONFIG_SYS_MPUCLK 550 +#define CONFIG_SYS_MPUCLK MPUPLL_M_550 #endif #define UART_RESET (0x1 << 1) diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h index 55f57ac9be..87b7d367b9 100644 --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h @@ -10,6 +10,7 @@ #ifndef _SYS_PROTO_H_ #define _SYS_PROTO_H_ +#include <asm/arch/cpu.h> #define BOARD_REV_ID 0x0 @@ -43,4 +44,6 @@ u32 wait_on_value(u32, u32, void *, u32); void enable_norboot_pin_mux(void); #endif void am33xx_spl_board_init(void); +int am335x_get_efuse_mpu_max_freq(struct ctrl_dev *cdev); +int am335x_get_tps65910_mpu_vdd(int sil_rev, int frequency); #endif |
