diff options
Diffstat (limited to 'arch/arm/include/asm/arch-sunxi')
| -rw-r--r-- | arch/arm/include/asm/arch-sunxi/clock_sun4i.h | 11 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 2 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-sunxi/cpu_sun9i.h | 5 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-sunxi/dram.h | 28 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-sunxi/gpio.h | 9 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-sunxi/rsb.h | 4 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-sunxi/sys_proto.h | 10 |
7 files changed, 39 insertions, 30 deletions
diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h index 05fbad3e11..c28ee0528f 100644 --- a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h +++ b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h @@ -144,7 +144,16 @@ struct sunxi_ccm_reg { #define PLL1_CFG_DEFAULT 0xa1005000 +#if defined CONFIG_OLD_SUNXI_KERNEL_COMPAT && defined CONFIG_MACH_SUN5I +/* + * Older linux-sunxi-3.4 kernels override our PLL6 setting with 300 MHz, + * halving the mbus frequency, so set it to 300 MHz ourselves and base the + * mbus divider on that. + */ +#define PLL6_CFG_DEFAULT 0xa1009900 +#else #define PLL6_CFG_DEFAULT 0xa1009911 +#endif /* nand clock */ #define NAND_CLK_SRC_OSC24 0 @@ -305,6 +314,8 @@ struct sunxi_ccm_reg { #define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2 #define CCM_GMAC_CTRL_GPIT_MII (0x0 << 2) #define CCM_GMAC_CTRL_GPIT_RGMII (0x1 << 2) +#define CCM_GMAC_CTRL_RX_CLK_DELAY(x) ((x) << 5) +#define CCM_GMAC_CTRL_TX_CLK_DELAY(x) ((x) << 10) #define CCM_USB_CTRL_PHY0_RST (0x1 << 0) #define CCM_USB_CTRL_PHY1_RST (0x1 << 1) diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h index e101c54051..8a803851e4 100644 --- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h +++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h @@ -243,6 +243,8 @@ struct sunxi_ccm_reg { #define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2 #define CCM_GMAC_CTRL_GPIT_MII (0x0 << 2) #define CCM_GMAC_CTRL_GPIT_RGMII (0x1 << 2) +#define CCM_GMAC_CTRL_RX_CLK_DELAY(x) ((x) << 5) +#define CCM_GMAC_CTRL_TX_CLK_DELAY(x) ((x) << 10) #define MDFS_CLK_DEFAULT 0x81000002 /* PLL6 / 3 */ diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h b/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h index a2a7839c6b..04889c51fa 100644 --- a/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h +++ b/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h @@ -73,7 +73,6 @@ #define SUNXI_CCM_BASE (REGS_APB0_BASE + 0x0000) #define SUNXI_CCMMODULE_BASE (REGS_APB0_BASE + 0x0400) #define SUNXI_PIO_BASE (REGS_APB0_BASE + 0x0800) -#define SUNXI_R_PIO_BASE (0x08002C00) #define SUNXI_TIMER_BASE (REGS_APB0_BASE + 0x0C00) #define SUNXI_PWM_BASE (REGS_APB0_BASE + 0x1400) #define SUNXI_LRADC_BASE (REGS_APB0_BASE + 0x1800) @@ -92,8 +91,10 @@ #define SUNXI_TWI4_BASE (REGS_APB1_BASE + 0x3800) /* RCPUS Module */ -#define SUNXI_RPRCM_BASE (REGS_RCPUS_BASE + 0x1400) +#define SUNXI_PRCM_BASE (REGS_RCPUS_BASE + 0x1400) #define SUNXI_R_UART_BASE (REGS_RCPUS_BASE + 0x2800) +#define SUNXI_R_PIO_BASE (REGS_RCPUS_BASE + 0x2c00) +#define SUNXI_RSB_BASE (REGS_RCPUS_BASE + 0x3400) /* Misc. */ #define SUNXI_BROM_BASE 0xFFFF0000 /* 32K */ diff --git a/arch/arm/include/asm/arch-sunxi/dram.h b/arch/arm/include/asm/arch-sunxi/dram.h index 7ff43e6d3a..aedd1941d5 100644 --- a/arch/arm/include/asm/arch-sunxi/dram.h +++ b/arch/arm/include/asm/arch-sunxi/dram.h @@ -25,31 +25,7 @@ #endif unsigned long sunxi_dram_init(void); - -/* - * Wait up to 1s for value to be set in given part of reg. - */ -static inline void mctl_await_completion(u32 *reg, u32 mask, u32 val) -{ - unsigned long tmo = timer_get_us() + 1000000; - - while ((readl(reg) & mask) != val) { - if (timer_get_us() > tmo) - panic("Timeout initialising DRAM\n"); - } -} - -/* - * Test if memory at offset offset matches memory at begin of DRAM - */ -static inline bool mctl_mem_matches(u32 offset) -{ - /* Try to write different values to RAM at two addresses */ - writel(0, CONFIG_SYS_SDRAM_BASE); - writel(0xaa55aa55, CONFIG_SYS_SDRAM_BASE + offset); - /* Check if the same value is actually observed when reading back */ - return readl(CONFIG_SYS_SDRAM_BASE) == - readl(CONFIG_SYS_SDRAM_BASE + offset); -} +void mctl_await_completion(u32 *reg, u32 mask, u32 val); +bool mctl_mem_matches(u32 offset); #endif /* _SUNXI_DRAM_H */ diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index 71cc879c2b..f2c247d79f 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -45,9 +45,13 @@ * * sun8i has 1 bank: * PL0 - PL11 + * + * sun9i has 3 banks: + * PL0 - PL9 | PM0 - PM15 | PN0 - PN1 */ #define SUNXI_GPIO_L 11 #define SUNXI_GPIO_M 12 +#define SUNXI_GPIO_N 13 struct sunxi_gpio { u32 cfg[4]; @@ -114,6 +118,7 @@ enum sunxi_gpio_number { SUNXI_GPIO_I_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_H), SUNXI_GPIO_L_START = 352, SUNXI_GPIO_M_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_L), + SUNXI_GPIO_N_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_M), SUNXI_GPIO_AXP0_START = 1024, }; @@ -129,6 +134,7 @@ enum sunxi_gpio_number { #define SUNXI_GPI(_nr) (SUNXI_GPIO_I_START + (_nr)) #define SUNXI_GPL(_nr) (SUNXI_GPIO_L_START + (_nr)) #define SUNXI_GPM(_nr) (SUNXI_GPIO_M_START + (_nr)) +#define SUNXI_GPN(_nr) (SUNXI_GPIO_N_START + (_nr)) #define SUNXI_GPAXP0(_nr) (SUNXI_GPIO_AXP0_START + (_nr)) @@ -187,6 +193,9 @@ enum sunxi_gpio_number { #define SUN8I_GPL2_R_UART_TX 2 #define SUN8I_GPL3_R_UART_RX 2 +#define SUN9I_GPN0_R_RSB_SCK 3 +#define SUN9I_GPN1_R_RSB_SDA 3 + /* GPIO pin pull-up/down config */ #define SUNXI_GPIO_PULL_DISABLE 0 #define SUNXI_GPIO_PULL_UP 1 diff --git a/arch/arm/include/asm/arch-sunxi/rsb.h b/arch/arm/include/asm/arch-sunxi/rsb.h index 95a595ab8d..a8934667c4 100644 --- a/arch/arm/include/asm/arch-sunxi/rsb.h +++ b/arch/arm/include/asm/arch-sunxi/rsb.h @@ -37,6 +37,7 @@ struct sunxi_rsb_reg { #define RSB_STAT_TERR_INT (1 << 1) #define RSB_STAT_LBSY_INT (1 << 2) +#define RSB_DMCR_DEVICE_MODE_DATA 0x7c3e00 #define RSB_DMCR_DEVICE_MODE_START (1 << 31) #define RSB_CMD_BYTE_WRITE 0x4e @@ -46,8 +47,7 @@ struct sunxi_rsb_reg { #define RSB_DEVADDR_RUNTIME_ADDR(x) ((x) << 16) #define RSB_DEVADDR_DEVICE_ADDR(x) ((x) << 0) -void rsb_init(void); -int rsb_set_device_mode(u32 device_mode_data); +int rsb_init(void); int rsb_set_device_address(u16 device_addr, u16 runtime_addr); int rsb_write(const u16 runtime_device_addr, const u8 reg_addr, u8 data); int rsb_read(const u16 runtime_device_addr, const u8 reg_addr, u8 *data); diff --git a/arch/arm/include/asm/arch-sunxi/sys_proto.h b/arch/arm/include/asm/arch-sunxi/sys_proto.h index c3e636e1d9..60a5bd8c85 100644 --- a/arch/arm/include/asm/arch-sunxi/sys_proto.h +++ b/arch/arm/include/asm/arch-sunxi/sys_proto.h @@ -13,4 +13,14 @@ void sdelay(unsigned long); +/* return_to_fel() - Return to BROM from SPL + * + * This returns back into the BROM after U-Boot SPL has performed its initial + * init. It uses the provided lr and sp to do so. + * + * @lr: BROM link register value (return address) + * @sp: BROM stack pointer + */ +void return_to_fel(uint32_t lr, uint32_t sp); + #endif |
