diff options
Diffstat (limited to 'arch/arm/include/asm/arch-omap5')
| -rw-r--r-- | arch/arm/include/asm/arch-omap5/clocks.h | 15 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-omap5/sys_proto.h | 2 |
2 files changed, 2 insertions, 15 deletions
diff --git a/arch/arm/include/asm/arch-omap5/clocks.h b/arch/arm/include/asm/arch-omap5/clocks.h index d0e6dd68da..28b9ff7826 100644 --- a/arch/arm/include/asm/arch-omap5/clocks.h +++ b/arch/arm/include/asm/arch-omap5/clocks.h @@ -615,23 +615,9 @@ struct omap5_prcm_regs { #define OMAP_SYS_CLK_IND_38_4_MHZ 6 #define OMAP_32K_CLK_FREQ 32768 -/* PRM_VC_CFG_I2C_CLK */ -#define PRM_VC_CFG_I2C_CLK_SCLH_SHIFT 0 -#define PRM_VC_CFG_I2C_CLK_SCLH_MASK 0xFF -#define PRM_VC_CFG_I2C_CLK_SCLL_SHIFT 8 -#define PRM_VC_CFG_I2C_CLK_SCLL_MASK (0xFF << 8) - /* PRM_VC_VAL_BYPASS */ #define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400 -#define PRM_VC_VAL_BYPASS_VALID_BIT 0x1000000 -#define PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT 0 -#define PRM_VC_VAL_BYPASS_SLAVEADDR_MASK 0x7F -#define PRM_VC_VAL_BYPASS_REGADDR_SHIFT 8 -#define PRM_VC_VAL_BYPASS_REGADDR_MASK 0xFF -#define PRM_VC_VAL_BYPASS_DATA_SHIFT 16 -#define PRM_VC_VAL_BYPASS_DATA_MASK 0xFF - /* SMPS */ #define SMPS_I2C_SLAVE_ADDR 0x12 #define SMPS_REG_ADDR_VCORE1 0x55 @@ -703,7 +689,6 @@ void scale_vcores(void); void do_scale_tps62361(u32 reg, u32 volt_mv); u32 omap_ddr_clk(void); void do_scale_vcore(u32 vcore_reg, u32 volt_mv); -void setup_sri2c(void); void setup_post_dividers(u32 *const base, const struct dpll_params *params); u32 get_sys_clk_index(void); void enable_basic_clocks(void); diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h index 40a7c57489..3b39dbd769 100644 --- a/arch/arm/include/asm/arch-omap5/sys_proto.h +++ b/arch/arm/include/asm/arch-omap5/sys_proto.h @@ -55,6 +55,8 @@ u32 omap_sdram_size(void); u32 cortex_rev(void); void init_omap_revision(void); void do_io_settings(void); +void omap_vc_init(u16 speed_khz); +int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data); /* * This is used to verify if the configuration header |
